3rd Party Remittance Posting Error - No Posting Document Created (ECC 6.0)

Hello Everyone,
When running 3rd Party Remittance process, the system does not create a posting document to be released/posted in PCP0. In PCP0, Run Type: TP -posting thrid-party remittance does not exist. Also, the T51R* tables are not updating properly as well when I execute the 3rd party processes.
I've compared configuration from the old to the new system and it appears to be okay. I need some assistance to figure out this issue. Can someone give some advice on how to resolve my issue.
Fyi...we run the following processes:
PC00_M99_U500 - Evaluation Run
PC00_M10_URMU- Store Evaluation Run
PC00_M99_URMUP- Create Posting Run
PCP0 - Process Posting Run
Since we are not using the new Evaluation Run program(PC00_M99_URME), do we need to deactivate it to use the old evaluation run (PC00_M99_U500)?
Your advice will be greatly appreciated.
Brenda Goodwin
IT System Analyst
Roche Diagnostics Operations, Inc

Naveen,
Thank you for your suggestion. My configuration was correct. The issue was a system issue in which was forwarded to SAP for immediate attention. To correct my issue, I had to apply SAP Note 1039104 - GEN: No Posting run number for 3PR posting run (RPURMP00).
Kind Regards,
Brenda Goodwin

Similar Messages

3rd party remittance error

Hello All,
We have an issue with posting 3rd party tax payments .We created customer account types Z and X to post with PERNRs and assigned them to customer wage types and technical wage types (like /404). Righr now when we try to do 3rd party remittance we always has this error "No entry in T52EK for key /404 F or Q"
Did anyone has similar situation like we have.
Kind Regards,
Rena

Yes. I did assigned everything correctly.. I found error message in the program - I just replaced Z to Q and everything is working right now.
Thank you

How to Reverse 3rd Party Remittance Document

Hi,
Would anyone let me know the process to reverse the 3rd Party Remittance document in HR. The current stage is- we had released the documents to FI side, and now we have already reversed the FI Side documents.
While running the RPCIPR00 program, it is giving us the message -
Job started
Step 001 started (program RPCIPR00, variant &0000000000003, user ID FCALLCSCHR1)
It is possible to reverse in a different period than which was posted in
_Partially acknowledged posting runs cannot be deleted/undone/reversed._
Spool request (number 0000020044) sent to SAP printer LOCL
Remittance posting run 0000002792 cannot be deleted/undone/reversed.
Job finished
We are still not successfull to delete the 3rd party

Self

"Error in fi document create" J1IEX Post

When I am posting excise invoice through TCode J1IEX, System gives error message "Error in FI document create". Kindly help me out to resolve this error.

I found solution..Note 1434628 is the resolution for this issue.

FI postings,3rd party remittance & Taxation

Hi Team,
I want to know how to configure Fi posting, 3rd party remittance & taxation part in US payroll. Kindly let em know how we do it in SAP.
Waiting for your response.
Regards,
Vimal

maintain the follow ing tables
V_T52EL maintian the symbol for the wage types
V_T52ek maintian the symbolic account for that wage type
and maitnian the feature F or c whether it goes to balance sheet or expenses
it goest to expenses
so check the tcode OBYG here for that chart of accounts assign ur wage type for G/L account

Connecting my iPhone 4S with 3rd party composite cable; error "accessory not supported by iphone". Sound comes through and it charges but NO Video???

Connecting my iPhone 4S with 3rd party composite cable; error "accessory not supported by iphone". Sound comes through and it charges but NO Video??? I have verified the cable, I can play video with sound from iPod Nano 4th gen.

composite don't support mirror so it will only display on the tv when the app being used support tvout option
the build in video app does so it should display on the tv at least my composite cable does with my iphone4
the audio always works it's pretty much works like a headset

Error in FI document create Message no. 8I031

Hi,
When Im trying to post excise invoice after MIGO, I'm getting the following error -> "Error in FI document create". I have maintained the following Company Code Settings in taxes. How to resolve this.
Error in FI document create
Message no. 8I031
Company Code    4000
CENVAT Doc. Type:    SA
Utl FI Doc Typ:     ZA
Regards
Ayyallas

Hi Ayyallas,
chek and apply the corrections in the note 1434628. This would help in pin pointing the reason for the error.
Regards,
Mauro
Edited by: Mauro Bianchi on May 12, 2010 5:21 PM

!!!!!!!Error in FI Document Create!!!!!!!!

Dear All,
While creating Excise Invoice (J1IIN) with reference to the Billing Document, we are getting the error "Error in FI Document Create".
Please let me know how to solve this error.
Issue is very very critical.
Regards,
Mullairaja

- Check the FI document type assinged to the respective Company Code in CIN- Basic settings - eg: in std its "SA"
check the Number range assigned to this is maintained or not?
- Then check the G/L account maintained against Excise Transaction Type:DLFC , & check field status group & mandatory fields.
Can you able to replicate the same in Quality system?
Regards,
Reazuddin MD

Posting to Accounting- No document created

Hi Experts,
When i am running the PC00_m99_cipe transaction then i am getting a msg....."no document created" .
plz help
regards
Kunal

Hi,
Have u run the posting run in simulation mode?? for doc. to be created u will have to run it in live mode"P". simulation is only to see if there r no errors.
Regards,
Atul

POSTING ERROR-MESSAGE POSTING BALANCE NOT CLEARED FOR THE PERIOD 2/2008A

Hi
I have a problem in payroll posting. While posting for one employee's persn number rejected and gave a message as Posting Balance not cleared for the period 2/2008A. To come out of the problem I changed the Payroll status record using pu03 changed the Erliest Retro date as 01.06.2008. Again tried to post but not posted again same Message displayed. After changing the Erliest Retro record I have not run the payroll for the particular employee. Is it required to run the payroll for the employee after changing the status in PU03. Request to guide on this
Thanks
EKP Yadav

Hi there
The posting may be out of balance for the employee because their credits dont equal their debits...
Do a test posting for the employee with the log on, this will tell you what amounts are being posted - and should give you an inidcation of where the balance is not cleared...
Yes, you would have to re-run the employee if you'd changed the retro date in PU03, but I dont think that will fix your posting problem....Should the employee have retroe'd?
From what I have seen, just changing the control record doesn't usually fix an out-of balance..there is usually another reason....eg wagetype incorrectly posting to the wrong number of accounts....or a missing wagetype on the employee (eg bank details...no /559 for the net pay to go to).
Cheers
Mary

Issue in 3rd Party Remittance to FI Posting

Hi there,
I am trying to run the Third Part remittance posting run and i am getting the issue "3rAccount with the following search key was not found: 1000HRFB039"
while running i am getting 2 line items,
1, Amount credit posted to Vendor account and debit posted to Techinal account (HRA).
2, Amount credit posted to Techinal account and for Debit i have assigned the GL in HRF and for this i got the above mentioned issue.
I checked in T030, V_T52EL and V_T52EZ, all entries are maintained. Please help me to resolve the issue.
Cheers
Sathiya

Hi,
I checked the Feature PPMOD, the employee subgrouping was maintained correctly. And also the acount assigment was also maintained for this employee grouping.
Cheers
Sathiya

3rd party remittance issue

Hi,
We accidentally deleted a 3PR posting document (which was in created status, not yet posted). The status of the posting in remittance reconcilliation report for the corresponding evaluation run was 'being posted'.
Now when we are trying to run create remittance posting for any other remittance evaluations, we get the error ' No entry in table T51R6_FUNDINFO for remiitance key 81818'
I reckon that due to deletion of the posting doc the details of remittance key/symbolic accnt were removed from the table T51R6_FUNDINFO.
How can we remove this error? Also is it possible to recover the deleted posting document in PCP0 or the associated remittance amounts?

Hi,
I checked the Feature PPMOD, the employee subgrouping was maintained correctly. And also the acount assigment was also maintained for this employee grouping.
Cheers
Sathiya

Posting Error - While Posting Payroll

Hi Gurus,
While posting payroll document, system is asking for GL Account, but when we assign HR Clearing Account in "Assign Technical Accounts", then system gives error that business area is missing line item 001 because document splitting is activated in FI.
But ideally should not ask for the GL Account.
Please tell me how can we solve the

Hello Laxmi Narayan,
Compare the payroll cluster with wage type mentioned in posting run... normally this type of error comes when infotype 9 i.e. Bank Details are not maintained etc.
If helpful please award points
Parag

Miro posting error : RG23 posting not yet done.

Dear Experts,
IN GR DOES NOT CAPTURE EXCISE INVOICE, that means part 1 not done & in po also does not apply excise duty BUT AT THE TIME OF MIRO POSTING ASKS PART II POSTING NOT YET DONE.
PLEASE HELP.
THANKS,
Sachin.
Edited by: sachin shelke on Dec 6, 2008 6:48 AM
Edited by: sachin shelke on Dec 6, 2008 6:52 AM

Hi,
Ask the concerned taxation team to do the part II entry through J1IEX and then do the MIRO.
Regards

3rd Party Application Download Error

Just recently purchased one from Ebay unlocked. I'm with Tmobile and the date plan has been activated. I can do things online, check email, chat, search. But i cannot download any applications.
"The IT Policy does not allow downloading third-party applications"
I cannot download, files, music, facebook applications, messengers....nothing. To access them I have to navigate online and find them.
Another problem is with the desktop manager. It is not recognising the phone. And I also cannot set up email.
HELP!!

Check this link: http://www.blackberryfaq.com/index.php/Remove_IT_Policy

3rd Party Remittance Posting Error - No Posting Document Created (ECC 6.0)

Similar Messages

Maybe you are looking for