3rd party vpn help

Hi
tried to setup a netopia dsl router but it was not quite working.
I put a Netgear firewall behind the netopia and got a little father. I
got phase 1 up and not phase 2 and I got messages on the BM IKE sceen.
So much closer.
A couple quick question AH or ESP?
I think the mail issue is that the wan side of the netgear is 10.10.1.2
and I have the netopia mapping a 75.28.120.89 to that. So I think the
netgear is sending the BM some info that does not match. Not sure how to
make the netopia let the Netgear take the wan IP over. Would that be
bridging? When I tried that was not able to access the internet.
I am guesing I should get a DSL VPN router. The Netopia does IKE but I
don't believe it lets me do protected networks and that is why I failed
when I set it up with BM.
Any thoughts?
Ike log below.
Thanks,
Will
3-12-2008 5:47:10 pm ***Receive Aggressive Mode message from 75.28.120.89
3-12-2008 5:47:10 pm
I-COOKIE=1D1ECC2AE22DD0CA,R-COOKIE=0000000000000000,MsgID=0,1stPL=SA-PAYLOAD,state=-1898738164
3-12-2008 5:47:10 pm Start IKE-SA 90E33100 -
Responder,src=68.21.158.113,dst=75.28.120.89,TotSA =1
3-12-2008 5:47:10 pm AUTH ALG IS 1
3-12-2008 5:47:10 pm Warn :Proposal mismatch PHASE 1 HASH Algorithm
mismatch mine : SHA his : MD5 dst : 75.28.120.89 src :
68.21.158.113 cookies[mine :his] CAF64711DDEB1343 : 1D1ECC2A00000004
3-12-2008 5:47:10 pm Warn :Proposal mismatch PHASE 1 DH Group mismatch
mine : 1 his : 2 dst : 75.28.120.89 src : 68.21.158.113
cookies[mine :his] CAF64711DDEB1343 : 1D1ECC2A00000010
3-12-2008 5:47:10 pm IKE SA NEGOTIATION: Peer lifetime = 86400 My
lifetime=3600
3-12-2008 5:47:10 pm ****DH private exponent size is 1016****
3-12-2008 5:47:10 pm Local server's interfaces : 10.30.1.2
3-12-2008 5:47:10 pm Local server's interfaces : 68.21.158.113
3-12-2008 5:47:10 pm Recieved MM ID payload type 1 protocol 0 portnum 0
length 8
3-12-2008 5:47:10 pm *Received MM ID ID_IPV4_ADDR 10.10.1.2
3-12-2008 5:47:10 pm *Sending MM id payload IPSEC_ID_IPV4_ADDR
68.21.158.113
3-12-2008 5:47:10 pm *protocol 0 portnum 0 length 8
3-12-2008 5:47:10 pm ***Send Aggressive Mode message to 75.28.120.89
3-12-2008 5:47:10 pm
I-COOKIE=1D1ECC2AE22DD0CA,R-COOKIE=CAF64711DDEB1343,MsgID=0,1stPL=SA-PAYLOAD,state=-1898738164
3-12-2008 5:47:13 pm ***Receive Aggressive Mode message from 75.28.120.89
3-12-2008 5:47:13 pm
I-COOKIE=1D1ECC2AE22DD0CA,R-COOKIE=CAF64711DDEB1343,MsgID=0,1stPL=HASH-PAYLOAD,state=-1898738052
3-12-2008 5:47:13 pm IKE : Not an NMAS user use default traffic rule
3-12-2008 5:47:13 pm Final IKE (phase 1) SA lifetime is 86400 secs
3-12-2008 5:47:13 pm IKE-SA is created. rekey time = 64800
encr=5,hash=1,auth=1,lifesec=86400
3-12-2008 5:47:13 pm dst=75.28.120.89,time=29536
3-12-2008 5:47:13 pm ***Receive Quick Mode message from 75.28.120.89
3-12-2008 5:47:13 pm
I-COOKIE=1D1ECC2AE22DD0CA,R-COOKIE=CAF64711DDEB1343,MsgID=F6E40B94,1stPL=HASH-PAYLOAD,state=-1898738052
3-12-2008 5:47:13 pm Start IPSEC SA 8ED4B280 - Responder****totSA=1
3-12-2008 5:47:13 pm AG MODE : Responder Ready to receive encrypted IKE
packets
3-12-2008 5:47:13 pm ****DH private exponent size is 1016****
3-12-2008 5:47:13 pm Received (QM) proxy ID 10.31.1.0 255.255.255.0 -
10.30.0.0 255.255.0.0
3-12-2008 5:47:13 pm Warn :Proposal mismatch Quick Mode : ESP -
transform mismatch mine : esp des his : esp 3des dst : 75.28.120.89
src : 68.21.158.113 cookies[his :mine] CAF64711DDEB1343 :
1D1ECC2A90E332D6
3-12-2008 5:47:13 pm sending notify message type: 14 to 75.28.120.89
3-12-2008 5:47:13 pm ***Send Unacknowledge Informational message to
75.28.120.89
3-12-2008 5:47:13 pm
I-COOKIE=1D1ECC2AE22DD0CA,R-COOKIE=CAF64711DDEB1343,MsgID=A2B64057,1stPL=HASH-PAYLOAD,state=-1898738052
3-12-2008 5:47:13 pm Processed SA-PAYLOAD unsuccessful - No proposal
chosen for quick mode, dst=75.28.120.89.
3-12-2008 5:47:13 pm Failed to create protoSA - No proposal chosen for
quick mode 75.28.120.89
3-12-2008 5:50:25 pm ***Receive Unacknowledge Informational message from
75.28.120.89
3-12-2008 5:50:25 pm
I-COOKIE=1D1ECC2AE22DD0CA,R-COOKIE=CAF64711DDEB1343,MsgID=BD0F9D55,1stPL=HASH-PAYLOAD,state=-1898738052
3-12-2008 5:50:25 pm recieved isakmp sa delete msg from 75.28.120.89
cookies are 1D1ECC2AE22DD0CA : CAF64711DDEB1343

Will K wrote:
> Hi
> 3-12-2008 5:47:13 pm Processed SA-PAYLOAD unsuccessful - No proposal
> chosen for quick mode, dst=75.28.120.89.
> 3-12-2008 5:47:13 pm Failed to create protoSA - No proposal chosen for
> quick mode 75.28.120.89
That means that phaseII, quick mode, does not match on both ends.
Settings has to be the same on both ends, about encryption.
There are few good documents about configuring 3rd party vpn with bm.
The device will change but the settings have to be the same, just use
one of this docs as example of the settings you need
Gonzalo

Similar Messages

TS4550 Are 3rd party VPN apps affected?

We use the app "Cisco AnyConnect" to establish a VPN connection "on demand".
Are third party VPN apps also affected by this change?

According to our Cisco contact, this change affects also 3rd Party VPNs on the iPhone.
"For customers unhappy with this change, they will need to discuss this with Apple as this is not a Cisco feature and this change is not in our control."

Solution Needed: Using VPN as a Jump off for multiple users to connect outbound to multiple 3rd party VPN

I work for a healthcare consulting company, we have 50+ consultants that work remotely from their home. We currently are cloud managed and for various reasons are looking for a solution to streamline our connection to our Clinics' personal VPNs. Our Clinics' VPNs vary greatly in regards to vendor and type of connection.
What we want to do:
Create a Jumpoff where all our consultants (simultaneously as well) can remote VPN into. From there be able to jump out to any of our Clinics' VPNs.
We need this because we have some consultants with foreign IPs and we also want to connect from Google Chromebooks which don't play nice with every type of our Clinics' VPNs. So the our Jump Off Box will have all the needed connections for any type of VPNs our Clinics use.
This solution should connect to our Clinics' side from their default VPN settings - Just a regular VPN connection from us to them.
From what I have been told is that this was attempted in the past:
Consultants VPN'd to our cloud server - RDPd to a machine and then VPNd out to our clinics. However this locked down the VPN and only one consultant could jump out.
What Cisco Product would allow us to do so?
How would this be set up?
Do we set up the Router to handle outbound connections?
Any input would be greatly appreciated.

Hi Jay, there are a number of ways you can do this I can help you setup an initial recommendation on what products to get please send me an email at [email protected] hope to hear from you soon!

ISE iPEP + 3rd party device VPN bridge or route mode

Dear All,
I would like to get some advice from the community regarding my idea.
We would like to integrate ISE iPEP with a 3rd party VPN device using bridge mode.
However i can only find documents describing the following scenarios,
- routed mode with VPN device
- bridge mode with Wireless Controller
So the questions is that is bridge mode supported if i would like to integrate ISE iPEP with a 3rd party VPN device or is it even possible to achive this kind of deployment?
Thank you in advance.
Best Regards,
Erik Molnar

Thanks for the reply Marcin. Both of your suggestions are good ones, however in this scenario both DC firewalls are alive at the same time, so there needs to be some kind of logic on the device at the remote site to say that it should only use tunnel B if tunnel A is down.
Thinking on this, is it possible to run an 'interface' or 'routed' mode IPSEC VPN with the ASA? I know this is possible with the Fortigates and think it's the default mode for Junipers. If that were possible we might be able to have both tunnels up and have OSPF run over them which would be another way to solve this problem.

VPN Tunnel trough 3rd Party Firewalls

Hello Community.
As i know VPN doenst work well with NAT and PATon 3rd Party Firewalls.
We have two site every site has a single IP Adress in the Internet, every Site has a Vigor Draytek Firewall. The ASA's are direct behind the Vigor Drayteks.
<--------------------------------- VPN Tunnel ------------------------>
Site1 -> ASA -> Draytek Vigor -> INTERNET -> Draytek Vigor -> ASA -> Site 2
Is that possible, will that be stable ?
Thanks patrick

Hello Patrick,
I would say that you could use NAT-Traversal to make it happen.
As you already know ESP/AH do not have any ports so you cannot use them with PAT, that is why you must use NAT-T
Regards,
Remember to rate all of the helpful posts
Julio Carvajal

I have a brand new iMac that does not have iDVD. Made a move on iMovie installed a 3rd party burn prog. but DVD won't playback on my regular dvd player. Need to burn one that will. Help!

My new iMac did not come with iDVD as they are not using iDVD any longer. I made a movie that I needed to put on a DVD that would play on any external DVD player. After calling Apple twice, they recommened a 3rd party program so I downloaded "Burn-osx" and made the DVD; however when i insert it into my player connected to the TV it gives the message "disk error --playback feature may not be available on this disk". Ok--now what? I am up against a time line here--need the DVD for a graduation party! Help! What am I not doing correctly?

I have a brand new iMac
If you are still within your 15 day return period. Call Apple they will sent out iDVD at no charge. (There are no realistic substitutes.)
Nicely explain that you may return the computer without iDVD. That usually does the trick. You MUST speak to a senior advisor to get a free copy. The first tier people cannot do it.
408-996-1010
800-692-7753
If that doesn't work you can purchase iLife 11 (includes iDVD) on disk.
IDVD is a wonderful piece of software and well worth the low cost of $40.
http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES/ref=sr_1_1?ie=U
they recommened a 3rd party program so I downloaded "Burn-osx"
Yes, there are programs that will put a movie on a DVD. I have tried most of the other substitutes including Toast, Burn, and others. None of them come anywhere near the ease-of-use and power of iDVD. IDVD is specifically designed to work with iMovie. Get iDVD.

Help after updating the OS to 4.3.3 none of the 3rd party app work

Help after updating the OS to 4.3.3 none of the 3rd party apps work at all they just flash up on the screen and then die.

install a free app (or any other app) from the app store, then the problem will be fixed.

Having problem w 3rd party software ., there tech advsed me to repair permissions before reinstalling software . However , querrie says repairing permissions is not good for system . whats up ,, help !!!

having problem w 3rd party software ., there tech advsed me to repair permissions before reinstalling software . However , querrie says repairing permissions is not good for system . whats up ,, help !!!

I've fixed the problem - I think.
I forgot I had the program "Little Snitch" installed on my computer. So I went into it and saw that it was blocking most of my connections for all the programs I use on a daily basis. Once I lifted the RULE to those certain programs - BAM - everything came back to life in an instant!

How to Advice/help on setting up Time Machine using 3rd party NAS please

I have a mixed home network with both Macs and PCs. All use a NAS device (Buffalo) to store data. I then back up to another drive which I attach via a USB socket on a PC once a week using Acronis. This is a 24-carat pain. I have another NAS device and would like to use Time Machine to back up (a) The Buffalo (b) The Home Folders on the Macs. Actually I haven't managed anything (a) Time Machine only looks for wireless devices (b) Any documentation I've read suggests Terminal commands which might or might not work, sparse images which I don't understand and the rest... I understood from reading that this can work but I can't see how. Does anyone have a "Painting by numbers" scheme for making this work? TM seems such a clever system it seems a shame to have to resort to a normal back-up program. Thanks for any help!

mouson wrote:
I ... would like to use Time Machine to back up (a) The Buffalo
some NAS(es) can be used as destination for time machine backups, however, time machine will not back up networked drives such as a NAS.
a 3rd party tool like ChronoSync may be able to back up NAS (A) to NAS (B) but i haven't tested this.

My 3rd party apps won't open. Please Help (Ipad Mini 6.1.3)

I have downloaded a 3rd party app, after using it for several weeks without interruption. It suddenly won't open (crashes) everytime I tried to open it. I have already tried on re installing the app, but nothing happened. Please help, I badly needed that app.

Try deleting the app, closing all apps in the recents tray, reboot the iPad, and then download the app again.
In order to cloase all apps - Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Close all of them. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
Download the app again.

All 3rd party plugins gone after update !!! HELP APPLE !!!!!!

All my 3rd party plugins are gone after the new update from apple !! I am running lep and logic studio G5 dual 2.5 ppc 8 gigs of ram !!!! What happen ???? Can not get the AU manger to launch !!!!! Help dead in the water !!!!!!!

Relax guy!
Try trashing to audiounits cache, and the Logic caches:
user/library/caches/com.apple.audiounits.cache
and
user*/library/caches/Logic/
Reboot, and try again...

Help! 3rd Party themes on N95 8gb!

Just got the N95 8gb and trying to install 3rd party themes. I can install it on the phone, but when I go to themes in setting the themes that were shipped with the phone are the only themes their.
Help. Am I doing anything wrong and are the themes still on the phone?
Any Help muchly appreciated.
Regards,
Sami

check if softaware installation is set to all and not signed only. online certificate check should be off. you can find these setting via menu, settings, applications, app. manager.
Have you managed to install any other application software ever since you got the phone and does it work? also check wherther the theme is for N95 and not a general theme. you can get more themes from www.zedge.net
If an error pops up saying certificate expired or something just change the date of ur phone to 2006 and then install... then set it back to 2007
can't wait for n97 successor

PCLinusOS + WINE but 3rd party applications freeze, help.

Loaded PCLinuxOS 4 times now with WINE in 3 different configs, 3rd party apps always freeze.
They do install but on loading they freeze, always. I've tried 6 different apps. & all freeze.
Admin is logged on & working.
2 HDD's, (HDD-1) NTFS and (HDD-2) Linux boot & swap
Any ideas?
LOL, I'm reading the receint LinuxOS is irritating MicroSoft. HOO-AHH!!!
I do hope Lunux will make more Apps to COMPLETLY replace Windows.
So far Linux is a bear to work with but I'm new to Linux, so go figure, BUT TRYING.
Thanks
fvm @ usa.com

Hi,
I have the same problem since yesterday and now after I have done something follow the instruction from this topic, it is working now!!!
Okay, Here is what I have done;
First:
I hard reset my Iphone; Steps stated as below,
1.) Press the home button (the big circle below the screen) and the sleep wake button (the button on top of the iPhone) simultaneously.
2.) Hold both buttons simultaneously for a few seconds, Ignore the "Slide to power off" and keep holding
3.) The iPhone should now shutdown automatically - (fade to black)
4.) Turn the iPhone back on by hitting the sleep/wake button.
5.) You should now see the Apple logo, your iPhone is restarting and thus booting up.
6.) You have completed a hard reset successfully.
Second:
I randomly updated one of my application (Hangman - It is a puzzle for word gussing)
The when I finish updating, I go randomly check one of my 3rd party applications, and it is working, and then I tried with others, all working as per normal.
Hope this would help.
P.S. It is indeed very frustrating to facing such an un-pleasant problem, hope apple side can come out with proper solutions in their next updates.

Help - need to give permission to download 3rd party apps

I've downloaded an application from a site I use often, so I trust it, but I cannot open the app because I apparently denied the use of 3rd party apps when I set up Lion. Cannot find that set up now to change it. Can you help?

Right-click its icon and press Open, or go to System Preferences > Security and Privacy and press Anywhere

Internet Not Working on 3rd Party Network (Please help!!!)

Hey guys,
Cool forum. Hopefully cool enough to solve this weird problem.
I own a BlackBerry Tour and live in Sweden part of the year. Since I put the 3rd party SIM in my phone and activated the account, I cannot get internet to work. I can use BIS services etc., but browsing the internet does not work....when I try it says "Could not connect tog the internet, please try again".
The weird thing is that sometimes I can browse google etc. through the BlackBerry Help! app...but other apps don't work. I'm thinking maybe it has to do with APN settings?
PLEASE HELP!!!!
Mitchell
Ps! BTW, I have tried all the usuals....resetting, pulling battery, resending service books, host routing tables...the problem is with WAP, not BIS.

Hi !
Don't panic yet
I think you didn't select the Flash with SFCommand in the HTML tab inside the Template dropdown menu, that's the reason your Actions Scripts doesn't work in the html view.
To access hold down CTRL+SHIFT+F12--->HTML tab--->The first dropdown menu at the top
Hope this solve your problem.

3rd party vpn help

Similar Messages

Maybe you are looking for