3rd post no help

So disappointed.... I can't get any help... Smdh. No more hp products for me

Hi,
This post does not have enough information to answer. Please use other post.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • 3rd post plz help

    I am having a problems with dynamic text fields and
    strings...
    For some reason the content in the dynamic text field doesn't
    update when I modify the XML file?
    Has anyone come across this before?

    __icarus__ wrote:
    > I am having a problems with dynamic text fields and
    strings...
    >
    > For some reason the content in the dynamic text field
    doesn't update when I
    > modify the XML file?
    >
    > Has anyone come across this before?
    Flash movie is loading cached file, clear cache and reload
    the page.
    Best Regards
    Urami
    <urami>
    If you want to mail me - DO NOT LAUGH AT MY ADDRESS
    </urami>

  • Form is not working of multiple form check boxs, source posted. HELP.

    Form is not working of multiple form check boxs, source posted. HELP.
    I'm trying to have golive form be able to check one, two or all of the options in Graphics field.
    As is it will only post results from the last checked box.
    Here's the page
    http://www.perfection-press.com/Pages/ContactForm.html
    Here's where source in golive has scanning,design,filesupplied.
    [code removed to fix forum topic display]

    Since the checkboxes all have the same name, the values are over-writing each other when being passed to the PHP script. The best way to fix that is to add a pair of empty square [] brackets after the checkbox names, so make the names "graphics[]" instead of "graphics". That tells PHP that the values are being passed as a list (an array) instead of a single value. As long as your processing script knows what to do from there (and it does), should solve the problem.
    By the way, I noticed that two of the checkboxes were named "graphics" and the other was "graphic" (singular). You'll want to fix that too so they're all the same.

  • When posting for Help on Network Magic Please Include

    Hi All,
    When posting for help on these forums include:
    Your Network Magic Version installed: 4.6.7324.0
    The type of connection to the Internet, like DSL, Cable, or Verizon FIOS Internet Connection.
    The Brand of Modem and its Model Number the router is connected to.
    The Brand, Model, Hardware Revision of your Router and include the Firmware Version: D-Link DI-624 Rev. C Firmware 2.70
    The Method of connection your problem computer has to the Router: Wired or Wireless.
    The Connection in use on the problem computer: Ethernet Port is a PCI Adapter Card, A D-Link DWL-G520 Rev. B
    Operating system and version and Service Pack Level, if any. Ex. Windows XP Professional x64 Edition Service Pack 1
    Software Firewall in use: McAfee Personal Firewall 9.0.136 Build
    Also if any Anti-Virus Program or Spyware Program is actively protecting your computer. (Some Programs like Spybot does cause problems, not being able to go to specific sites.)
    Include your location in the post or fill out your Profile for this forum and include the location. (Reason: Not all Routers from a given manufacturer are available everywhere.)
    Post the link to your Router Model, if an off-brand Router or not found in the USA on the Manufacturer's USA's Website. (Why? Posters helping each other, aren't working for Pure Networks or Network Magic, so make it easier on the posters helping on.)
    And any other information you think is important if answering your own post, and the nature of the problem, itself.
    By posting all this information, you can hopefully get help from someone that has the same equipment that you have and theirs is working. Not everyone has the same equipment.
    thecreator - Running Network Magic version -5.5..9195.0-Pure0 on Windows XP Home Edition SP 3
    Running Network Magic version -5.5.9195.0-Pure0 on Wireless Computer with McAfee Personal Firewall Build 11.5.131 Wireless Computer has D-Link DWA-552 connecting to D-Link DIR-655 A3 Router.

    mhchiang,
    If you have multiple systems that all show the same symptoms,
    then it is probably not a problem in the computers.
    You may need to investigate the rest of your network hardware
    and your campus network software.
    Your campus network administrators may have made some recent changes.
    Ethernet switches may have power supply problems, or they're getting old.
    Firewall software may heve had recent changes to its configuration.
    If the cabling goes over long distances, from building to building,
    there may be damage to wiring.

  • 3RD POST AND STILL NO REPLY :( PLEASE HELP

     Hi,
    What is required in the HOST and QUEUE field when setting a WIFI printer?
    When setting up my printer, i fill the options identical to what follows:
    PRINTER:  SAMSUNG HOME
    DRIVER:    GENERAL
    BEARER:  LPR <-----------------------------( NOT SURE IF IT IS THE CORRECT OPTION TO SELECT )
    The following fields appear once LPR is selected:
    ACCES POINT : HOME
    HOST:              WHAT COMES HERE?
    USER:              SKY00BER
    QUEUE:            WHAT COMES HERE?
    ORIENTATION: PORTRAIT
    PAPER SIZE: A4
     if it helps, my printer is SAMSUNG CLX-3175FW. It is Wifi Enable and is connected to my HOME acces point.
    please do correct me if there has to be changes to the BEARER or anything else.
    HELP URGENTLY NEEDED!

    sky00ber wrote:
     Hi,
    What is required in the HOST and QUEUE field when setting a WIFI printer?
    When setting up my printer, i fill the options identical to what follows:
    PRINTER:  SAMSUNG HOME
    DRIVER:    GENERAL
    BEARER:  LPR <-----------------------------( NOT SURE IF IT IS THE CORRECT OPTION TO SELECT )
    The following fields appear once LPR is selected:
    ACCES POINT : HOME
    HOST:              WHAT COMES HERE?
    USER:              SKY00BER
    QUEUE:            WHAT COMES HERE?
    ORIENTATION: PORTRAIT
    PAPER SIZE: A4
     if it helps, my printer is SAMSUNG CLX-3175FW. It is Wifi Enable and is connected to my HOME acces point.
    please do correct me if there has to be changes to the BEARER or anything else.
    HELP URGENTLY NEEDED!
    I'm not sure but I give it a try.Turn your security(WPA/WEP) and Firewall temporarely off. HOST is the IP address of the printer. QUEUE can be YES or a specific amount of prints, like 1,2,3......
    If I look at the manual of your printer I see that you can find the IP and MAC addresses in the Network Configuration Report.I don't know what the USER is doing there because if there is a user then there must be a password.
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • For the 3rd post I need help..

    Ok so I realized I was posting on a no fb account for some reason.. Basically my story goes like this , I've started selling on eBay again. I recently got a very new buyer Contacting me every 10 min asking me questions after purchasing an item such as what is the condition does it work etc.. He then paid 3 days later he has 0 fb.. He asked me 1 day after he will get the item I explained he will get it in the mail box .. He said what if I'm not home I said no the key mailbox that everyone shares the brown one with the slots.. It took me about a day of messaging back and forth how it works.. The next day he says he lives in the basement of a house and there renting .. I ask if he has access to the mailbox we talk about ... Nop he doesn't... So I tell him to ask the owner . For the key It's been 7 days now ( 5 business days) he said he checked the box and it has not arrived.. He lives 2 hours from me So I'm assuming it was there a day after I shipped maybe 2.  Does anyone know what happens if mail stays in the big slot of the mailbox for more than a few days is it returned to the owner? I ask this because there are so many people getting mail now and there are only 2 big slots for a whole street! I really don't want to light 30$ on fire because this guy had no clue what he was doing.

    Did you use a tracked service like Regular Parcel on this $30 item?If so, when the item is delivered the postie will mark it delivered.After that, the twit is on his own.Give him the tracking number and the Canada Post website (canadapost.ca) so he can see for himself. If not, he will have to talk to his upstairs neighbour, who I presume picks up and passes on all his mail, and let them know he is expecting a parcel. Let him know what the package looks like (kraft envelope/ white paper/ PO box/ poly envelope). Oh and add him to your Blocked Bidder List. Too much drama.  

  • Processor upgrade 2nd Gen to 3rd Gen. Help!

    I have a pavilion DM4 2191us and I would like to upgrade try a dead laptop's i7 3rd gen processor on my hp so i can diagnose if the problem is truely the processor or not. I do not know if the i7 is compatible with my laptop. The dell website says that these could be the possible i7 models 
    Intel® Core™ i7 (3940XM)
    Intel® Core™ i7 (3840QM, 3740QM, 3540M)
    The socket i have is compatible with website you linked and all these processors are compatible with my socket (988b rPGA)  http://www.cpu-world.com/Sockets/Socket%20G2%20(rPGA988B).html
    This lady from intel suggests that you check if the bios is compatible with your cpu type https://communities.intel.com/thread/49613 How would I go about to do that? 
    This question was solved.
    View Solution.

    Here is the Service Manual:
    Manual
    Page 1 has the compatible processors. No 3rd gen i7 is listed. The Intel HM65 chipset will support some 3rd generation i7 processors (see below) but you cannot assume that chipset support translates to support by the HP motherboard.
    i7-3517UE, L3 4 MB, Turbo 2.8 GHz
    i7-3555LE, L3 4 MB, Turbo 3.2 GHz
    i7-3610QE, L3 6 MB, Turbo 3.3 GHz
    i7-3612QE, L3 6 MB, Turbo 3.1 GHz
    i7-3615QE, L3 6 MB, Turbo 3.3 GHz
    In fact, I do not recognize any of the listed processor as ever being used in an HP laptop. The other thing I will say is it is extremely unlikely if you are facing a no-post situation that the fault is the processor. Not impossible, but very unlikely. Beep codes are very unreliable. Almost certainly the issue is the motherboard, not the processor. 
    If this is "the Answer" please click "Accept as Solution" to help others find it. 

  • On 3rd replacement! help with ongoing issues

    I am desperate! I got my first 3gs in May and by July I took it to a Genius Bar becuase of battery issues. They replaced it immediately.
    That phone worked fine at first then it started to freeze. It would turn off randomly and I wouldn't be able to get it back on no matter what way I tried to plug it in (into my imac, into the wall, into speakers - nothing worked). It would finally turn on a few hours later. The phone also started to make a bizarre noise after haning up a call. A few seconds after hang up a loud fuzzy quick noise would come out of the speakers. I took it in to the Genius Bar, we reset everything as new, and after about a week, I took it back again with the same issues and the phone was replaced the second time.
    The second phone, after about a month, had the same issues with freezing and the noise from the speaker. We reset it as new and after a few appointments, it was replaced and I got my 3rd phone.
    My 3rd phone is having the exact same issues so i took the phone and our computer into the Apple Store. They checked out the computer - everything was fine - looked at my itunes and didn't see any issues and we reset the phone again. A week later, my issues are back and worse. My phone will not play on any speakers at all (it acknowledges it's plugged in and charges and won't play. My husband's iphone will play on the speakers), and when I put headphones in it's extremely fuzzy (have tried 3 sets of headphones). The phone freezes and is making the same noise after a call ends.
    Any ideas of what else to look for or do would be SO helpful. I do not want another replacement phone. Could there be a virus? Could it be an app (I only have a few apps - NPR, ATT, that's it).
    My husband has a different login on our computer and has the same phone and hasn't had any issues.
    Thank you!

    No your iPhone can't have viruses. Take it back to apple, I went through 4 iPhone 3G's till I got a good one, it happens with technology sometimes, you get duds. You need to go back to apple.

  • Apple says the Washington Post is not broadcast you iPad 3s and I have on the iPhone for asked the comics section 60 refreshingly cannot read the contact post and help them

    The comics from Washington Post cannot be read on the iPad three nor on the iPhone to keep refreshing are not readable spoke to Apple Apple says it is do not Apple issue but I purchased my iPad to use for this  as well  I spoke to the  iPad editor Washington Post.com
    To contact the post   [email protected]  I google comics washingtonpost.com to read. Lease help them if possible

    I have no clue what you're saying.

  • Major problem with Syncing my ipod nano 3rd generation! HELP PLZ!!!!!!

    My computer had a virus and i had to reset windows, so all my music got wiped off the system.
    i then reinstalled windows and itunes. the itunes library didn't import any music because there wasn't any music on my computer.
    a few days ago, My ipod nano 3rd generation froze and i had to reset it, all my old music is on my ipod.
    but when i try to sync new music from my library to my ipod - it doesn't work!!!!! It just keeps on saying that my ipod is synced with another library (not true) and that i can't sync it unless i wipe off all the music on my ipod.
    PLEASE HELP!

    Did everyone try the basic "5Rs" first? Mainly did you first try to reset the iPod and then if that didn't work, did you try to restore it?
    Patrick

  • Oracle 9i AS post installation help

    Hi all,
    I had installed the Oracle 9i Infrastructure and Application server successfully on Win2000. Tested the services and demo forms. I Need to know post installation configuration details and steps on how to deploy the forms and reports into it. Thankful if you can provide some help on this.
    regards,
    Sampath

    Ahter installing ias successfully
    you can be able to Apache start/stop ,Forms and Reports server sample application ,and lot's of other stuff under oracle-iSuits.
    For example if you want to see the Apache main page start the server and in the browser page type the host name you can see the links.
    null

  • Invoices posted without good receipt initial posting - please help

    Hi Gurus,
    I would like to ask you if you have and answer / solution for this situation.
    I have a release order with 6 invoices + goods receipt. The problem here is that all the invoices were posted, but not the initial goods receipt. a Financial account had already been posted as well, so i dont know how i will solve this situation !!
    Can u please help me ?
    If u need more information please ask me.
    Thanks in advance,
    Mário.

    Hi
    If you see these invoices in the vendor line items, all would have got payment block in it. Unless GR is done for these PO's, it will not get released automatically. If GR is not required for these invoices, then you will be able to make payment. But if GR based IV is ticked in PO, unless you do GR, you will not be able to make payment to the vendor.
    You can still post GR through MIGO for the same PO. System will allow you to post GR for these invoices.
    Award points if found useful.
    Regards,
    K Lakshmanan

  • XI post installation help!!!

    Dear SAP gurus,
    I have installed XI3.0 successfuly and could perform post installation steps successfully.
    When i went through the document of readyness check of XI here i need to run T-code sproxy in order to check
    1-) =>Check/maintain with report SPROX_CHECK_IFR_ADDRESS 2-) =>Check with report SPROX_CHECK_HTTP_COMMUNICATION
    3-) =>Check with report SPROX_CHECK_IFR_RESPONSE
    4-) ==>Check with report SPROX_CHECK_IFR_CONNECTION
    My only connection that is working is (2) which says "Http communication is functioning".
    but if i try to check (1) connection it says error "ERROR: Address not maintained".
    Because of this error i think (3) and (4) connection test is also not working properly.
    I could successfully import exchange profile but i have not been able to understand where the problem exist and not able to run T-code successfully.
    Please help me!!!
    Thanks and Regards
    Dheeraj Thareja

    Have you checked the Integration_direcroty_hmi RFC?
    I would also check the sldapicust
    and the config in sxmb_adm - adapter engine
    Also check the exchangeProfile: Particulary the following:
    com.sap.aii.connect.repository.name:
    com.sap.aii.connect.repository.httpport:
    com.sap.aii.connect.repository.contextroot:
    Furthermore, the logon data is also read from the exchange profile
    (section 'ApplicationSystem'):
    com.sap.aii.applicationsystem.serviceuser.name:
    com.sap.aii.applicationsystem.serviceuser.pwd:

  • MSI 890FXA-GD65 not posting please help!!!

    Hi everyone I am new to the site and I am doing my second build first time with a MSI board here are my componets.
    1: MSI 890FX-GD65
    2: AMD PHENOM II X4 980 BLACK EDITION 3.7 AM3 SOCKET
    3: G.SKILL Sniper Low Voltage Series 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800)
    4: SAPPHIRE FleX 100314FLEX Radeon HD 6870 1GB 256-bit GDDR5
    5:  CORSAIR Builder Series CX500 V2 500W ATX12V v2.3 80 PLUS Certified Active PFC Power Supply\
    Here is the issue I did the minum connections before putting the computer in the case to make sure it would POST, but it doesn't. The motherboard speaker doesn't make a sound but the 8 led lights on top of the MOBO are all lit. I cant get any response from my monitor when its hooked up to my video card. the fan from the PSU and video cards are spinning but again no POST can anyone help Me with this thank you., also I used a second power supply and still no POST or response from the monitor but again all the fans are working and all 8 of the led lights are lit at the top of the MOBO. once again thanks for your help.

    Good evening!
    All parts are new?
    Use a single stick of memory.
    Recheck all power connections are well in place, and don't forget the one near and for the processor.
    Don't think that is the problem, but for good measure you should also reseat the graphics card.
    I'm not sure whether this mobo has a speaker.

  • Can we get a new category for posts besides "Helpful" and "Solved"?

    Because there should be a button for "Opposite of Helpful" to label those posts that pretend to be answers, but are really just a waste of pixels or a means for someone to get their message count up.
    Most of the time the users are fantastic and helpful and at least try to help you solve a problem, even if they don't have the answer.
    But then there are The Others.
    And rather than indulge in a slanging match, it would be nice to just click on an "Unhelpful" button to stop some (hypothetical) poster from advising you to (hypothetically) "Get a Dell!" to solve your Mac problems.

    Hello fogharty,
    As Nick posted above that system of applying helpful/unhelpful to posts was tried a few years back and was found to not work as many users abused it and it did not function the way it was intended.
    Once you have achieved level two status through acquiring points in the current system you will be able to report posts to the moderators to have them edited or deleted if they don't follow the Terms of Use of the forums. You also can always post your concerns about a topic/post here in this forum for the moderators to attend to. Just include a link to the offending post or topic.
    One never knows though, the system might changes again but that is up to the powers that be
    littleshoulders

Maybe you are looking for