3TB HDD installed in HP S5360f Need BIOS Update

The original drive crashed and I replaced it with a Toshiba 3TB HDD. Now the system will boot up and run for a bit, but then freezes. The OS and the system setup screens both only recognize the new 3TB drive as being 800GB. Other support forums state that I need to update the BIOS, but I cant find it on the HP site.
What's the best way to proceed from here?
DattGuy

DattGuy, welcome to the forum.
Here is a guide for running 3 TB hard drives with Win 7. Also, here is a BIOS update for the computer. It will not address the problem that you are experiencing, however.
Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Similar Messages

Need BIOS Update Lenovo V580c [for correct work with HDD PUIS] Windows 10 x64 TP

Hello, Im update my bios notebook V580c from official page this model, latest release from official site. But when i try update my notebook - i got message, your bios update file older than your original firmware? but im ignore it and force update. When i install Windows 10 x64 TP - i got some problems with HDD freezing, intel rst AHCI controller driver installing get only BSOD, lot of a versions i try. Need bios update. Thanks.

Im understand that, but i still have a problems with Windows 8.1 x64, after Win10. When i try update AHCI controller driver - i got BSOD. no one version get good update, only oldest 2006 year standart universal driver HACI from Microsoft still work, but HDD continue freezing. Some Power flags on my HDD after Win10 get u some strange settings, and BIOS V580c too old - to correct work with it.
What i must do to fix it? (sorry for bad english, im russian)

GT60 0NE-403US - crashing - do I need BIOS update?

Hey guys, I need some advice here. Any inputs are more than welcome!
I got a GT60 0NE-403US laptop a few weeks ago. It originally has Win8 64bits, now Win7 Ultimate 64 bits.
bios version E16F3IMS.5OU
build date and time 11/23/2013 15:22:49
EC version 16F3EMS1 ver5.04
EC build 09/24/2012
I experienced many crashes and sometimes BSODs when running all type of games (even old ones).
Reading some topics here and in other forums I decided to update the EC to the Win7 version provided on MSI website.
16F3EMS1.413.zip
That stopped all BSODs and some of the crashing problems, but not 100%. Old games are good now, but for newest games (like Crysis 3 and Bioshock Infinite) I was still getting some crashing followed by message (most of times) "Display driver nvlddmkm stopped responding and has successfully recovered", and from what I read about it, it CAN be related to overheating. Using MSI Afterburner for monitoring, I noticed that most of times when it's about to crash, the temperatures are above 80C (always using the cooler boost function).
I did a simple test underclocking the core clock by 20 MHz and memory clock by 40 MHz, it became much cooler than before (about 75C-79C) and experienced no more crashing after almost 1 hour of playing.
I think I've tried all type of video configurations and I'm getting out of options. The only thing I can think is to update the BIOS for Win7, but according to MSI website "If the notebook you purchased has Win7 Bios installed, please DON'T attempt to update using Windows 8 bios (or vice versa). Failure to abide may result in bricking your system.".
So the question is: Do I need/Can I update my BIOS? If not, what are my other options to this annoying problem?
Here are the specs:
Model: MS-16F3
Intel i7-3630QM - 2.4GHZ Turbo 3.4GHZ
GTX680M - 4GB GDDR5
3 X 4GB DDR3 - 1600MHZ
750GB SATA HDD
NVidia driver: 314.22 WHQL
Intel HD Graphics 4000 driver: 15.28.15.64.3062
Windows 7 Ultimate 64 bits - all updates applied
Thanks in advance.

Quote from: darkhawk on 03-April-13, 09:38:10
I don't agree with this. The people that were having problems had the GTX675M/GTX675MX cards. This would be the first person I've seen with a problem on a GTX680M. So, I don't really think this is 100% driver related.
I'm running 314.22 and haven't had a single crash, even with my GPU overclocked.
I had problems similar to this, when the GPU got above roughly 85C I would get driver crashes such as you suggest (NOT BSOD's...but you fixed that with a bios update).
Underclocking will help, although I'm quite surprised it seems to have helped as much as you show with such a small underclock.
Honestly, the first thing I would do is perhaps check to make sure all the heatsinks are not clogged with dust. It's very unlikely, but it could happen. Then, I would consider replacing the CPU/GPU thermal compound. This should hopefully help your temperatures a bit.
If you're uncertain of doing that, I would perhaps consider doing an RMA. It seems like you have some issues with the video card.
Thx for the suggestion darkhawk.
Actually I didn't do anything with the BIOS, I've only updated the EC.
Is it safe to update my current BIOS E16F3IMS.5OU (from what I saw on MSI website, it's only for Win8) to 30S (for Win7, my current OS)? Also, do you think updating it could help?
Thx.

T61 upgraded to Windows 7, now can't install Rescue and Recovery or Bios update.

I have a T61 6459 CTO that had XP SP3 on it. I upgraded to WIndows 7. I tried to install TVTVRNR450_025en, but I get an error msg "Rescue and Recovery does not support installing from the Operating System which upgrade from a legacy pre-load system." I tried deleting all old RNR and CSS programs in the old files after the install, but nothing seems to work. There is nothing listed in my add/remove programs. My Thinkvantage button doesn't work. How do I remove the old RNR? Should I have done that prior to installing Windows 7? Do I need to re-install my XP backup and start over? My Bios update extracts, but doesn't install. Help!

Hi, FSURN82
I did some research and was able to find this thread from Lenovo Forums. There are a few other people having similar issues. For some, installing an older version of Rescue and Recovery (sometimes even the one for their OS before the upgrade) would work fine. For some, however, they could not get it to work, so they would create backups manually using Windows.
As for the BIOS issue, what version are you currently running and to what version are you trying to upgrade?
Thanks,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

I cannot buy anything on my iphone 5(v.6.0.2) and it say itune version not support this purchase. or itune not install correctly.do i need to update IOS version?

can anyone tell me why?it just say : Your Purchase Could not be completed
Purchase Failed : Your Itunes version does not support this purchase, it was not installed correctly. or you're not sign into a itunes account.
why?
or i need to update latest IOS?

Try to do a reset, if it doesn't work try remove recently added apps this may solve your problem ( like google app because it has happened with me)
Take a look at apps using your location service in privacy, it can cause battery draining.

Need BIOS update!!! HELP!!!

OK I want BIOS update for my pc but i can't seem to know from which series my pc belongs to is it hetis 900 series or something else. Please Help!!!

Quote from: goku1234567890 on 28-May-13, 23:07:28
My current BIOS version is 1.00. I need update for my BIOS because my pc is giving BSOD a lot. My Bios is very old it is of 2007 in think updating bios might help me. BSOD error is 0x101 (CLOCk_WATCHDOG_TIME something). It is caused by "ntkrnlpa.exe". So Help Please!!!!
The age of the BIOS is irrelevant. If the system worked fine previously, then it is not a BIOS issue, as it does not go bad or deteriorate over time.
From what I can gather from reading about the STOP 0x101 error, you most probably have a faulty CPU.

Satellite A200-23U - Need Bios update for XP

Hi!
Where I can find BIOS update for this notebook for Windows XP?
Thanks.

> Is it possible install other similar BIOS for XP from the Toshiba American driver page? Are there some forecasts for appearance of BIOS XP update on the Toshiba European driver page?
I would not recommend installing different BIOS updates from different notebook series on the Satellite A200-23U.
The point is that a wrong BIOS or not compatible BIOS can damage the ROM module or the motherboard!!!
I would not risk this!!!
Fact is that you should update the BIOS only with the version which was designed and published especially for your notebook model.

Need BIOS update for Tecra A4-SP619

I have a Tecra A4-SP619 and i need a Bios Update. Where I find this?
Thanks

_One additional info:_
You should know that the BIOS update is always risky.
The wrong BIOS or wrong BIOS update procedure can damage the board or the ROM module.
Yes its true dude. The BIOS upgrade is not an easy thing like a graphic card driver update. BIOS update should be done as a last resort.
and please read more info before you will continue the BIOS update.
best regards

Y2P - Installed Energy Manager before the BIOS update: problem?

So, my yellows are still not the best of yellows.
I installed the Energy Manager and then saw that there was a BIOS update that you were supposed to install before EM. Whoops.
Removed EM, rebooted, and reinstalled, rebooted. Yellows look a little better, but still a little mustardy.
Thoughts?

ok nevermind the above post, I found a utility to make a bootdisk that works from bootdisk.com all my problems went away and am typing this from enlightenment as we speak.

Crashing Techra TE2000 Needs Bios Update, Using Windows XP. Any Advice?

I have an older Toshiba TE2000 that has been crashing lately due to an insufficient BIOS update. It also states there is a problem with the RAM. Each time the computer crashes and reboots, it sends me to a Windows supports site that has diagnosed the problem, referring me to a BIOS update.
I have been doing my homework and know that a BIOS update is very tricky and can lead to permanent damage. It may be necessary.. however I don't want to have to buy a new laptop.
Can anyone offer any advice or support?
It started crashing a few weeks ago, and crashed three times the other day. Are the crashes affecting my computer and what will happen if I don't update soon?
Thanks for all your help
Chelios
Solved!
Go to Solution.

Go to the Product Support Link at the top of this page, enter in your model, then clik on the Download Tab to find the available bios files for that model. DO NOT update the bios from within Windows. Don't do it, don't even think about doing it if you want to use your computer again. When you double click on the download you will be presented with the choice of creating a CD to flash the bios from. USE THIS METHOD. You can use a CD-RW so you don't waste a blank, but even the cost of a regular blank CD is cheap compared to the $100 that most places will charge you to fix a botched bios flash. Be sure to burn the CD at the slowest possible speed to ensure the best possible quality. Make sure that your battery is fully charged, installed, and the AC Adapter is plugged in just in case.
And don't forget to go into the bios and hit the F9 key to load Bios/Setup Defaults then F10 to exit and save just prior to and immediately after updating the bios.
If you don't post your COMPLETE model number it's very difficult to assist you. Please try to post in complete sentences with punctuation, capitals, and correct spelling. Toshiba does NOT provide any direct support in these forums. All support is User to User in their spare time.

Satellite A200-10W - Need BIOS update

I've got A200-10W for a few years and a year and a half ago I decided to switch form Vista 64bit do Windows 7 64bit, I installed it, everything was working fine till a month ago problems started to occur.
When BIOS screen shows it sometimes freezes and sometimes takes a minute to switch to Windows 7 loading screen, I've checked the BIOS version and it's 1.40 (yeah I'm an idiot for not updating sooner), so I've decided to update BIOS but I can't find any update except 1.80 for Vista 32bit, so can anyone please help with this? =(
Sry for bar grammar

Hey,
I agree with Akuma. You can still try the Vista 32bit version, its has nothing to do with your 64bit system. If its not compatible you get an error message.
But unfortunately I doubt BIOS will help you. If the computer freezes at BIOS screen it could be related to the hardware. Maybe the computer cant recognize a certain hardware part correctly like RAM, HDD or something else.
Before you try updating the BIOS load the default settings (F9 key). Save & exit new settings and test it again if the error occurs or not.

Unable to install nvidea Video drivers after Bios update - Latitude E6530

I recently flashed my bios to the newest version
E6530A16.exe | Windows/DOS (9 MB)
Release date 23 Oct 2014|Last Updated 23 Oct 2014
Version A16,A16
After that I can't install video drivers. So I can't connect another monitor to my computer.
This is the driver I'm trying to install,
"nVIDIA Graphics Driver for: Quadro 1/2/3/4000, Quadro 5010M, Quadro K1/2/3/4/5000M, Quadro K11/21/31/41/5100M, NVS 4/5200M, and GeForce GT 720M"
Version 9.18.13.2762,A07
I've also tried the Intel driver on the support page.
I'm running Windows 8.1x64 Professional and am up to date with all Microsoft patches.
The error I get is "The graphics driver could not find suitable hardware"

Hi hreinn1000,
I’d advise that you load defaults in the BIOS. Please follow the steps mentioned below to load the BIOS to defaults to check if the camera gets detected on the system.
Reboot the computer.
When prompted during POST, press the <F2> key to enter the setup screen.
On the System Setup screen, press the <F9> key.
Press the <Enter> key on Yes to Load Optimized Defaults and restart the computer.
Also, Also, I would suggest that you run the diagnostics on the computer by following the steps mentioned in the video below and check if there is any issue with the hardware on your system. Please private message us the system service tag so that we could check and assist you further. To send a private message, click on my name and send private message.
http://dell.to/164l6g4

New pages installed but says I need to update Pages to open any of my previous pages documents

I recently upgraded OSX and upgraded Pages, now I can't open any of the documents previously written with pages. It
comes up that I need to upgrade and it is already installed.
I need to be able to open my documents!

Then you have 2 versions of Pages on your Mac.
Pages 5 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5.01 can not open Pages 5.1 files and you will get the warning that you need a newer version.
Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Once opened and saved in Pages 5.1 files can not be opened in Pages 5.
Anything that is saved to iCloud is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has removed almost 100 features from Pages 5 and added many bugs:
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
Peter

Need BIOS update?

I have a Sound Blaster X-Fi Xtreme Audio board. I recently purchased a USB capture device (Avermedia DVD EZMaker USB Gold) in order to input home video (VHS) files into the computer.
The Sound Blaster board seems to work fine, and I am satisfied with it. However, when inputting video/audio on the USB, depending on which capture software I use, sometimes the audio is non-existent or at an extremely low level.
I have read the Creative paper entitled ?Optimizing your system for better sound performance?, but I feel that it is beyond my capability to implement and I would have to hire someone to do it.
My video board (NVIDIA GeForce FX 5700) contains TV, and this seems OK in most of the capture software, but this is not USB, and maybe there is a significant difference. I do not know how the USB sound is processed via the sound board.
In your opinion, do my audio capture symptoms seem to be those which relate to motherboard and bios adjustment, or would they relate more to the video board?

How about that the USB device makes ZERO use of the sound card, and uses whatever software and self-contained hardware it comes with. You want something to use the sound card, you need to connect it to the sound card.
As far as,
However, when inputting video/audio on the USB, depending on which capture software I use, sometimes the audio is non-existent or at an extremely low level.
Check the options in the program and if present, make sure that it is set to use the USB device. If the option isn't there then go into Windows audio options and set the USB device as the default audio device.

Does PNY GTX 750ti on HP p7-1227c need BIOS update?Chris

I have an HP p7-1227c BIOS 7.04 and a PNY GeForce GTX 750ti OC 2048MB video card
This is Not the MSI card with the legacy BIOD downgrade switch.
Apparently a version 8 BIOS will enable UEFI which is needed. Is there a way to do this without having to update to Windows 8?
Chris

Chris, welcome to the forum.
I believe that the card requires UEFI in the motherboard. HP didn't begin using UEFI until mid-October, 2012. I suggest contacting PNY's Tech Support to see if they have a VBIOS update that will allow the card to work with your BIOS. There may even be a work-around for the problem, but they would be the ones to know. I don't believe that Win 8 would help with the problem.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

3TB HDD installed in HP S5360f Need BIOS Update

Similar Messages

Maybe you are looking for