4.0.3 Server update won't install. Trash and reinstall? Nope.

Seems every day I get the Software update for 4.0.3 server. Each day it downloads, and appears to install. But when I look at the properties, it still just shows "Version 4" and each day it shows that it's available for download again.
So I thought I'd uninstall Server, and re-download and install.
But even though I stopped all services and deleted server from my Applications folder, the App store still thinks it's on my computer. So it won't let me download it. I only says "OPEN" (and then when I click that, it throws an error, because it can't find the app.)
Anyway, thoughts?
How to properly uninstall server? Or how to get the 4.0.3 update to take?
danke

Try looking through this thread here, where I came up with a brute-force fix. This worked for me, but only on the supposition that you're not trying to save data already in server (e.g., mail stores, etc.). Server 4.0 stuck on "updating wiki service"

Similar Messages

Reader update won't install--over and over

Adobe's install procedure fails numerous times over several months. I see no way to provide
feedback about the failure. Almost no information is given with the feedback. This strikes me
as amateurish software development & maintenance.
--Mischlbay

You need to install all previous updates before you can install this one. If you have done so and it still won't install. Then uninstall Reader. Run the Microsoft installer cleanup tool, then try to re-install all from scratch.

Windows Updates won't install - Error 0x80072EFD

Question
Windows Updates won’t install. I’m receiving Error 0x80072EFD. What can I do to solve this?
Answer
This particular error means that your computer was not able to connect to the Internet when it tried to install updates. First, check your Internet connection and then try again. If that doesn’t work, try the methods below.
Method A: Make sure that Windows Firewall is turned on, and temporarily disable third-party firewalls
Warning This workaround may make a computer or a network more vulnerable to attack by malicious users or by malicious software such as viruses. We do not recommend this workaround but are providing this information so that you can implement this workaround at your own discretion. Use this workaround at your own risk.
To complete this method, follow these steps.
Step 1: Make sure that Windows Firewall is turned on
To open Windows Firewall, click the Start button, and then click Control Panel. In the search box, type firewall, and then click Windows Firewall.
Click Turn Windows Firewall on or off.
Click On (recommended), and then click OK.
Step 2: Temporarily disable third-party firewalls
Click the Start button, click Control Panel, and then, under System and Security, click Review your computer's status.
Click the arrow button next to Security to expand the section.
Under Firewall, read the firewall status note. This information will indicate which, if any, firewall is installed and whether the firewall is turned on. For example, for ZoneAlarm, the notice will say ZoneAlarm Firewall is currently ON.
Open the third-party firewall application that is listed in the firewall status note, and temporarily disable the firewall. If necessary, refer to the firewall application documentation, or contact the application vendor for more information about how to temporarily disable the application.
Step 3: Try to install the updates again
If this method resolved your issue, follow the steps in Method B, step 2 to re-enable your third-party firewall. You might want to also check for and install any necessary updates to your third-party firewall.
If this method did not resolve your issue, continue with Method B.
Method B: Temporarily disable third-party antivirus software
Warning This workaround may make a computer or a network more vulnerable to attack by malicious users or by malicious software such as viruses. We do not recommend this workaround but are providing this information so that you can implement this workaround at your own discretion. Use this workaround at your own risk.
Note If your third-party firewall is still disabled from Method A, do not open e-mail messages, surf the Web, or use instant messenger at this point.
Step 1: Locate and temporarily disable your third-party antivirus software
Note Windows does not detect all antivirus software, and some antivirus software doesn't report its status to Windows. If your antivirus software is not displayed in Windows Security Center, and you're not sure how to find it, try any of the following:
Look for the antivirus software in the list of programs on the Start menu.
Type the name of the software or the publisher in the Search box on the Start menu.
Look for the software in Action Center:
Click the Start button, click Control Panel, and then, under System and Security, click Review your computer's status.
Click the arrow button next to Security to expand the section.
If Windows can detect your antivirus software, it will be listed under Virus protection.
If the software is turned on, check the Help documentation that was included with the software for information about how to disable it.
Note You may have to look in the application documentation to determine how to do this.
Step 2: Check for Windows Updates
As soon as the antivirus software is temporarily disabled, visit the Windows Update or Microsoft Update site again, and try to download and install updates.
If this method resolved your issue, and you were able to install the updates successfully, you should re-enable your third-party antivirus software.
If this method did not resolve your issue, continue with Method C.
Method C: Disable software accelerator programs
Disable any software accelerator programs that may be running. Some examples of these programs are file download accelerators and Internet speed accelerators.
Note If your third-party firewall is still disabled from Method B, do not open e-mail messages, surf the Web, or use instant messenger at this point.
Step 1: Disable software accelerator programs
To do this, select from the following options:
See the documentation that was included with the program.
View the Help files for your program.
Contact the program vendor. For information about how to contact the program vendor, visit the following Microsoft Web site:
http://support.microsoft.com/gp/vendors
Step 2: Install Updates
As soon as the software accelerator program is disabled, visit the Windows Update or Microsoft Update site again, and try to download and install updates.
If this method resolved your issue, you should enable the software accelerator programs that you disabled in Step 1.
If this method did not resolve your issue, continue with Method E.
Method D: Add the Windows Update Web site and the Microsoft Update Web site to the Trusted Sites list
Note If your third-party firewall is still disabled from Method A, do not open e-mail messages, surf the Web, or use instant messenger at this point.
To add the Windows Update Web site and the Microsoft Update Web site to the Trusted Sites list, follow these steps:
Start Windows Internet Explorer.
On the Tools menu, click Internet Options.
Note If you are using Internet Explorer 7, and the menu is not available, press the ALT key on your keyboard to access the Internet Explorer Menu.
Click the Security tab, and then click Trusted Sites.
Click Sites, and then click to clear the Require server verification (https for all sites in this zone check box.
In the Add this Web site to the zone box, type the following addresses, and then click Add after you type each address:
http://update.microsoft.com
http://windowsupdate.microsoft.com
Click OK two times.
Try to install the updates again.
If this method resolved your issue and you were able to install updates successfully, you should re-enable your third-party firewall if it is still disabled. To do this, see step 2 in Method A.
For more methods and advanced troubleshooting techniques, see You may encounter temporary connection-related errors when you use Windows Update or Microsoft Update to install updates.

Mark, I've just been through this update issue with two installations. In my case, it seemed intertwined with authentification and indexing not working, either. Upon a transfer of my system disk to new hardware I got hit with the issue and couldn't fix it. Which is why I did a clean install of Win7 ultimate 64bit on my T61p. The install (including update) worked great until I ran the intel matrix storage manager update. This broke windows update. If you surf the web, and include "intel rapid storage manager" or "intel matrix storage manager" and "Windows update fails", you'll see that a lot of folks feel that the intel driver (or how windows handles it) is what breaks update. I tracked this down to a driver, iastor.sys, in windows\system32\drivers. I was able to fix my Window Update by copying an iastor.sys from another recently built machine (should be exactly the same, but this was my wife's T510, but still Win 7 Pro 64) to overwrite the iastor.sys that the intel update changed. To be clear: I couldn't get windows update or indexing to work. I overwrote* the "bad" iastor.sys with one that worked on another computer. Rebooted. Update worked. I just wanted to point out that instead of blindly installing updates to fix problems, folks should be aware that sometimes the update is the problem. Especially as these systems are off warranty and the drivers are not being updated. I've asked elsewhere, so let me ask here: Where is the System Interface Driver for t61p? Not listed anywhere on site, links on the web referring to it are all broken. Is the System Interface Driver now part of another driver program? Thanks! Jim T61p, Win 7 Ultimate 64bit, and T510, Win 7 Pro 64bit

Windows updates won't install

Hello,
I have a remote user whose Windows updates won't install. He has a Dell laptop with Windows 7 Pro 32-bit. You can bring up the update windows and start the install but, at exactly 10 seconds, it just says "Updates failed" and doesn't really give
any more information.
I saw the Windows update service was stopped, I started it and that didn't seem to help. I also tried the update troubleshooter and that didn't do anything. I checked for malware and didn't find any, and he has plenty of disk space. I didn't see
anything in Even Viewer or Reliability Monitor either.
What could it be?
Thanks.
Chris Hansen

Hi Chris,
Firstly, please check if those Windows Update have already installed:
1. Open Windows Update by clicking the Start button. In the search box, type
Update, and then, in the list of results, click Windows Update.
2.In the left pane, click View update history.
3. Click Installed Updates at the top of the page, there check if any Windows Update installed recently.
If there is no any Windows Update installed, try to
reset the Windows Update component to check if it could resolve the issue.
Karen Hu
TechNet Community Support

10.6.8 update won't install gets half way through then just freezes spinning beach ball for 4 hours any ideas y. Tried and restarted 3 times already does the same thing each time have to hold down the power button to restart

10.6.8 update won't install gets half way through then just freezes spinning beach ball for 4 hours any ideas y. Tried and restarted 3 times already does the same thing each time have to hold down the power button to restart. Anyone can help

Ok will check, as of right now I have 82.57gb free, that's plenty of space will check the disk though using disk utility. Also I am now downloading the update from the apple website instead of going through software update

10.4 update won't install

latest iTunes update won't install correctly. Says to shut down iTunes for update to complete. I've made sure 3 times that iTunes was not opened.

I'm having the same problem with Windows 7 and cannot download direct from the website.

Updates won't install,billing info wrong

Updates won't install,keeps saying problem with billing info,then there was a problem with a previous payment,but I can't find out what is was.

You'll have to update your billing info from itunes, here's a guide on how to do it on iOS http://support.apple.com/kb/ht1918?viewlocale=nl_nl . It may be that there weren't suffecent funds at the time of the last purchase, in which case you'll just have to varify the three digit security code. Hope it helps!

Illustrator update won't install, even after uninstalling and retrying multiple times.

Illustrator update won't install, even after uninstalling (using the "Uninstall Adobe Illustrator CS6" app and retrying (using Adobe Application Manager}multiple times. Now I can't open AI CS6 at all.
The error message I get in Application Manager is:
"Application could not be found. Restore in case it was trashed/moved to a different volume. Reinstall the application otherwise (U44M1P2B)"
Help!

Can you please try installing the Adobe Application Manager from http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774.
If that doesn't work then the safest course would be to remove all Adobe Creative Software using the uninstallers located in Applications/Utilities/Adobe Installers. This should then remove the Adobe Application Manager folder also inside Utilities. Once the software is completely uninstalled and the Adobe Application Manager is removed then you should be able to reinstall from https://creative.adobe.com/.

New update won't install on my Dell Laptop Windows 7. Even tried from the iTunes website. Now all of my access is gone. What must I do?

New update won't install on my Dell Laptop Windows 7. Even tried from the iTunes website. Now all of my access is gone. What must I do?

Hello SandyJeanne,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Best of luck,
Mario

Jam Pack 4 update won't install

I've resinstalled *Jam Pack 4* 1.0 and went to Apple's site and downloaded the 1.0.1 update to correct some sound quality issues. However, the update won't install. I keep getting the message, "There is nothing to install," when I get to that step in the installation process. I see in an archived area others have had this problem as well with this Jam Pack 4 update. Why won't the update install?
Any help out there for this?

try repairing permissions:
http://www.bulletsandbones.com/GB/Tutorials.html#repairingpermissions

IPhoto 9.1 update won't install

I just bought a new MacBook Pro. It came with iPhoto 11. The iPhoto 9.1 update won't install. It keeps saying that I need iPhoto 9.0 or greater, but I have iPhoto 11. I have not moved iPhoto from its default location. My computer is only 2 days old. I've seen others with this problem, but no real solution. Anyone have any suggestions?

Thanks for your response TD, but this App, iPhoto 11 came already installed on my computer. I registered my computer, but you can't register a product without a serial number. I don't have the iPhoto 11 serial number because it came installed on my computer already. I tried re-installing iPhoto 9.1 after registering my computer and got the same error message. However, I did find out that I hae 90 days of complimentary phone support. So I will be giving Apple a call.

My Mac won't install mpkg and pkg files.

My Mac won't install mpkg and pkg files. Whenever I double-click an pkg or mpkg file, I get the dialog box to "choose an application" to open it. After some searching, I discovered I do not have the installer.app. I tried to Repair Disk from my Snow Leopard DVD but every time it boots from the DVD, my computer crashes. Any suggestions?

You have the installer app. It is located in /System/Library/CoreServices.
Use the finder's Go menu, Go to Folder... and type /System/Library/CoreServices to open the CoreServices folder. You should see it in there. If you do not see it there then that would beg the question what else might be missing and perphas you need to do an update (re)install (or restore form a hopefully good backup).
To try to reassoicatate .[m]pkl's with the Installer, take one of your .[m]pkg's and do a finder Get Info on it and set the Open with... to the Installer app. If the Installer app is not shown use Other... at the bottom of the list to navigate to the CoreServices folder and select Installer. Then click the Change All... button.
I am not sure why your [.m]pkgs would have lost their Launch Services association with Installer in the first place (unless it really is missing).

Apparently a recent update did not install correctly and we get a message: Service (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services. How do we fix?

Apparently a recent update did not install correctly and we get a message: Service (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start systen services, How do we fix this?

Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80.

Verify that SQL Server Reporting Services is installed properly and that it is running.

I am trying to install DPM 2010 on Windows 2008 R2. Running through installation and the server that I'm installing DPM to will also host the SQL instance and Reporting instance. Pretty much choosing all the defaults.
Installation gets to reporting portion and fails. It says that I need to verify that Reporting Services is running.   The exact error is:
Data Protection Manager installation has failed. To return the server to its original state, you must uninstall Data Protection Manager by using Add or Remove Programs in Control Panel. This will remove all files and components copied during installation.
For details, click the Error tab.
DPM Setup has not configured Reporting Services to use Secure Sockets Layer. For more information on how to configure the Report Server for Secure Sockets Layer (SSL) connections, see Configuring Report Server for Secure Sockets Layer (http://go.microsoft.com/fwlink/?LinkId=178289)
Report configuration failed.
Verify that SQL Server Reporting Services is installed properly and that it is running.
ID: 812
It is running and working, I can go to the URL and see Reports installed.   It grabbed a server certificate which is valid and binds that to 443. I have tried this as well with the certificate removed.
Here is the relative portion of the DPM 2010 log:
[6/25/2010 10:30:01 AM] * Exception : => System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.ReportingException: Exception of
type 'Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.ReportingException' was thrown.
   at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.ReportingException.UnableToConfigureAccount(ErrorCode errorCode)
   at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.CreateUserAccount(String server, String password, Boolean create)
   at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.SetReportingPassword(String password, String server, String instanceName, String dbConnectionString)
*** Mojito error was: PasswordTooShort; 0; None
   --- End of inner exception stack trace ---
   at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
   at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
   at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args)
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.ConfigureReporting(Boolean isRemoteDb, String rsMachineName, String rsInstanceName, String installerPath)
[6/25/2010 10:30:01 AM] * Exception : => Report configuration failed.Verify that SQL Server Reporting Services is installed properly and that it is running.Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.BackEndErrorException: exception --->
Microsoft.Internal.EnterpriseStorage.Dls.Setup.Exceptions.ReportDeploymentException: exception ---> System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.ReportingException:
Exception of type 'Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.ReportingException' was thrown.
   at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.ReportingException.UnableToConfigureAccount(ErrorCode errorCode)
   at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.CreateUserAccount(String server, String password, Boolean create)
   at Microsoft.Internal.EnterpriseStorage.Dls.UI.Library.Reporting.Reporter.SetReportingPassword(String password, String server, String instanceName, String dbConnectionString)
*** Mojito error was: PasswordTooShort; 0; None
   --- End of inner exception stack trace ---
   at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
   at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
   at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
   at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args)
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.ConfigureReporting(Boolean isRemoteDb, String rsMachineName, String rsInstanceName, String installerPath)
   --- End of inner exception stack trace ---
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ReportingConfiguration.ConfigureReporting(Boolean isRemoteDb, String rsMachineName, String rsInstanceName, String installerPath)
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.ConfigureReporting(String reportserverConfigFilePath, Boolean existingDB, Boolean isOemSetup, Boolean isRemoteDb, String sqlServerMachineName, String instanceName)
*** Mojito error was: ReportDeploymentFailed; 0; None
   --- End of inner exception stack trace ---
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.BackEnd.ConfigureReporting(String reportserverConfigFilePath, Boolean existingDB, Boolean isOemSetup, Boolean isRemoteDb, String sqlServerMachineName, String instanceName)
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.DpmInstaller.ConfigureReporting(Boolean isRemoteDb)
   at Microsoft.Internal.EnterpriseStorage.Dls.Setup.Wizard.ProgressPage.InstallerThreadEntry()
*** Mojito error was: ReportDeploymentFailed; 0; None
[6/25/2010 10:30:07 AM] *** Error : Report configuration failed.
Verify that SQL Server Reporting Services is installed properly and that it is running.
ID: 812
[6/25/2010 10:30:07 AM] Information : Data Protection Manager installation has failed. To return the server to its original state, you must uninstall Data Protection Manager by using Add or Remove Programs in Control Panel. This will remove all files and components
copied during installation.
For details, click the Error tab.
DPM Setup has not configured Reporting Services to use Secure Sockets Layer. For more information on how to configure the Report Server for Secure Sockets Layer (SSL) connections, see Configuring Report Server for Secure Sockets Layer (http://go.microsoft.com/fwlink/?LinkId=178289)

Hello,
The real problem is the error UnableToConfigureAccount and *** Mojito error was: PasswordTooShort; 0; None
The reason is due to the new password complexity on Windows 2008 which states the following:
Password must meet complexity requirements
This security setting determines whether passwords must meet complexity requirements.
If this policy is enabled, passwords must meet the following minimum requirements:
Not contain the user's account name or parts of the user's full name that exceed two consecutive characters
Be at least six characters in length Contain characters from three of the following four categories:
English uppercase characters (A through Z)
English lowercase characters (a through z)
Base 10 digits (0 through 9)
Non-alphabetic characters (for example, !, $, #, %)
Complexity requirements are enforced when passwords are changed or created.
Default:
Enabled on domain controllers.
Disabled on stand-alone servers.
Note: By default, member computers follow the configuration of their domain controllers.
Please use a more secure password adhering to the above criteria and DPM should install fine.
Regards, Mike J [MSFT] This posting is provided "AS IS" with no warranties, and confers no rights.

I have just successfully installed icloud control panel on my pc. However I now cant login because it is saying I have a server error. I have uninstalled and reinstalled, but with the same result. Any suggestions?

I have just successfully installed icloud on my PC. However I cannot login to the control panel due to a server erro. I have uninstalled and reinstalled but still get the same message. Any ideas?
Gaunty1

Thanks. but I am not using Outlook. Looking at other postings, I don't seem to be the only one experiencing this. Shame apple aren't helping!

4.0.3 Server update won't install. Trash and reinstall? Nope.

Similar Messages

Maybe you are looking for