4.0.3 Version 5a (DON'T DO IT!)

22 Dec 12
UPDATE: Sony Tier-2 sent me a link to download a flash file. I'm going to be trying that out today.
one other issue popping up is apps dissapear from the screens. Seems to happen ramdomly.
23 Dec 12
Wish they would have just sent me the image file to begin with.  That solved all the problems
and unlike wiping the device doesn't trash all your applications and data.
For those with problems I suggest skipping the Hard Reset and simply asking for Tier II to send you
a link to the correct update for your device.
For ref, mine was signed-nbx03_001-ota-121116036.zip
I would post a link but since this file might change based on versions it's best you just contact Tier II.
The timer is back, the remote control works. 
Lots of bugs, at least for me.
Had to hard reset and the remote control still does not work.
Timer and Recorder have vanished.
and now Google Play store is crashing.
 The fix for this is the same as the old fix. Uninstall updates from Apps then restart the tablet.
Not happy.. not happy at all.
I should have known better than to be among the first test subjects.

And what do you think a "hard reset" is. ?
The solution was to use the downloaded update and install it from the SD card.

Similar Messages

  • HT4972 im trying to update IOS version, have done everything as recommended.  however, it doesnt seem to be working, when i try to buy a tune i am again prompted to update to new IOS version... can you offer any advice

    im trying to update IOS version, have done everything as recommended.  however, it doesnt seem to be working, when i try to buy a tune i am again prompted to update to new IOS version... can anyone offer any advice

    Is this an iPhone or iPad question? You posted in the iPad forum.
    See
    iOS 5: Updating your device to iOS 5
    http://support.apple.com/kb/HT4972
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
    Tip - You may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. After you update to iOS 5.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • Can i get SnipSnap Coupon app 1.3 or 1.4 version. i don't need the latest version . if anyone has please kindly provide the .ipa file.?

    can i get SnipSnap Coupon app 1.3 or 1.4 version. i don't need the latest version . if anyone has please kindly provide the .ipa file.?

    btw..coupon apps is not for theft....few people need but few people not....technolgoy is here for everyone....
    thanks for your reply.

  • How can i remove unwanted bookmarks from bookmark bar on MAC I'm using firefox 4.0.1 and on previous version Ff 3.6 I had organize bookmark button on this version I don't

    how can i remove unwanted bookmarks from bookmark bar on MAC I'm using firefox 4.0.1 and on previous version Ff 3.6 I had organize bookmark button on this version I don't

    http://support.mozilla.com/en-US/kb/Deleting%20Bookmarks?s=delete+bookmark&as=s
    follow the above link it explains it all

  • I am deleting all my old versions of  Lightroom and want to install the newest version , I don't pay extra for that right? It's still part of doing  the creative cloud monthly  cost right?

    I am deleting all my old versions of  Lightroom and want to install the newest version , I don't pay extra for that right? It's still part of doing  the creative cloud monthly  cost right?

    Correct, if you've got the Photography Plan or the Cloud Complete Plan.

  • My Muse says it needs update but the adobe installer says i have the latest version ( I don't) what to do?

    My Muse says it needs update but the adobe installer says i have the latex version ( I don't) what to do?

    CC desktop lists applications as "Up to Date" when they are not
    -http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html
    -and added step https://forums.adobe.com/thread/1529654

  • Error: exporting versions is done using RAW

    Hi,
    I'm having a strange problem which I couldn't find in the different communities.
    My workflow: As usual, I'm importing my pictures in RAW and process it in Aperture (3.1.2). Now, I wanted to export the pictures in JPEG. To do so, I right-clicked on the desired project, chose "Export --> Versions", and in the export presets "JPG - Original size".
    The export was working fine (the folders were created), but the pictures exported were no JPEG but RAW (file format CR2, I have a Canon 500D), and - hardly surprising - without any of my my adjustments. The result is the same whether I'm exporting individual pictures or whole projects, and even changing the presets for the export (e.g. TIFF) doesn't change anything; Aperture insists on RAW being the file format of the exported pictures.
    And just to answer the most likely question: Yes, I've chosen "Export --> Versions" and not "Export --> Masters".  :-)
    Anyone has an idea what I've done wrong?
    Kind regards
    Dirk

    Hi Kirby, hi Ernie,
    thanks for your help... after a lot of trying, I found at least the reason for the error.  :-)
    The Aperture library is situated on a NAS, and the image files are stored within the library (that was the import setting as well). It seems that Aperture has got some troubles with that situation.  In the browser, the badge "the referenced image master is offline" is displayed for all the images. Strange enough, because all the image masters are stored in the library (the NAS is online as well), and I can access the library.
    It seems that with this status, Aperture can't export properly. After some trying found out that I found out that if duplicate the version of the image, Aperture doesn't think any more that the referenced image master is offline. When I export this version, everything is fine.
    I don't really understand what's going on, but the question has shifted somehow - no export problem any more, but "How can I import images to a Aperture library situated on a NAS without creating the problem mentioned above".
    Dirk
    PS:
    English is not my first language, so I apologize for any errors.

  • Two desktops version that don't work and can't uninstall - Please help

    Hello all,
    Looks like I have this double whammy. Everything started when I had the brilliant idea of installing version 6.0 of desktop software. It installed fine and recognizes my BB (8330 Curve). I can save my BB content however it will not let me synch when I try to do this I get the “Intellisync Unknown Error” message.  
    I then noticed that version 4.5 was still there so I tried to uninstall it. However I keep getting that dreaded "Could not access VBScript run time for custom action" message. I’ve looked for this error in the forum and tried to apply the recipe I found here, namely to register the VBscript DLL. I’m getting a message saying that the register process was successful, however when I try to uninstall I still get the VBscript error message again.  I then tried to do a manual uninstall of version 4.5 and tried to reinstall it. It did but now I can’t synch using version 4.5 anymore now getting the “Intellisync Unknown Error” message there as well.   
    Just so you know, I’m running Windows 7 32-bits, and I have an admin profile on my machine.  
    So now I have two versions of desktop software that do not work and that I can’t uninstall! If anyone can help I would be very grateful because I’m running out of things to try.
    Thanks in advance,

    Have you tried installing Microsoft® Windows Script version 5.6? Since you are unable to uninstall the Desktop Manager, try manually deleting the folders from your computer (Task 3 in the following KB article) and removing the associated registry keys. http://bbry.lv/cmoQ5P  Then reinstall version 6.0.
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • Every time I click on a link, an OLD version of Firefox keeps opening, I don't know how to eliminate the old version (I don't see it in the applications folder). This hasn't happened with any other upgrades to Firefox. Can you help?

    This happens when I get an email with a link attached. Also, every single time I open up the NEW version, it defaults to the "welcome to Firefox 4" page. Is there a way to make it stop doing that too? Did I just download the new version too soon, before the bugs were worked out?

    Version 3.6.16 is opening....as it did when I clicked the link in your email message to me about this situation. The upgraded version (Firefox4) sits in my dock and the old version opens when I click on a link.

  • TS1363 I have an ipod shuffle, 7yrs old. Says I have an error and to re-install. Then it tells me, this file cannot be read because it was created by a newer version of itunes. I cannot find any newer version and don't recall downloading it anyway.

    Told to re-install itunes. When I do, it tells me "This file cannot be read because it was created by a newer version of itunes." Therefore I can't re-install! Can't seem to find a way to get itunes back. This is a 8 yr old ipod shuffle...

    The latest version of iTunes can be downloaded here
    http://www.apple.com/itunes/
    As long as your computer supports it, the latest iTunes will work with all shuffle models, back the first one.
    Just one thing.  The latest iTunes hides the sidebar, which can be confusing for long-time users.  To show the sidebar, from the menu bar, under Views, select Show Sidebar.

  • After installing new version, I don't have the firefox button feature.

    I don't have the orange firefox button to allow me to see all of my menu options. I am running XP.

    Usually you have either the orange Firefox button or the classic menu bar, but not both at the same time.
    You should be able to switch back and forth this way:
    If the classic menu bar is not displayed, tap the Alt key to display it and then use
    View > Toolbars > Menu Bar
    to make it persistent. It should replace the orange Firefox button. To switch back, uncheck
    View > Toolbars > Menu Bar
    Does that work??
    Also, the Mozilla ActiveX plugin is defunct and should be uninstalled ASAP. It isn't reliable above Firefox 1.5, and may have unpatched security problems. [http://kb.mozillazine.org/ActiveX#Uninstalling_the_ActiveX_plugin_on_Windows How to uninstall].

  • Versions, I don't get them.

    I'm brand new to Aperture. I have a folder with two different Projects in it. I imported a photo into one project that I want to use for the master. I then did a Duplicate version which created a 2nd version in a Stack. I wanted the option of having the second version in the other project. I dragged it there, but the original 2nd version remains. If I click delete version in the first Project, it also deletes the copied one from the second.
    Basically, I am confused on the most basic of Aperture things, Masters.
    Should I instead of copying a version, import from the original on my hard drive to have another pure version?
    -Kirk

    I think it comes down to not understanding Aperture. I know Aperture doesn't mess with the original file.
    If I shoot 100 photos, I may use only 2-5 of them. I wanted to pull them out of the "All" project into a "My Picks" project.
    It's an organization thing. Maybe I'm not doing it right.
    I have a folder called "LBI Photos, LLC" inside it, I have currently three Projects:
    LBI Photos 2007, LBI Photos 2008, LBI Photos on Website
    Inside the 2007 and 2008 I have folder for each month. So the year ones house all the photos I took those years. Once I choose photos for sale on my website, I move them(or would like to) LBI Photos on Website. So I can quickly see my final picks.
    Maybe this isn't the right way to organize. It seemed right when I did it, but not knowing Aperture too well, maybe it isn't.
    -Kirk
    www.lbiphotos.com
    Message was edited by: xparrot

  • Used LR5 trial version, purchased upgrade version, but don't have previous serial number

    Hi guys,
    Seems I have misunderstood the purchase and after my trial version expired I decided to buy the upgrade version (thought it would be the one as I already had there software downloaded and used as trial). Now I have purchased the upgrade software, but obviously I do not have the previous licence code!
    How can I get it to work and pay the difference only? Or do I have to contact Adobe, cancel the upgrade version, wait for the refund and order afterwards the full version?
    Thanks
    Patrick

    I think you have answered your own question. We are all just users like yourself. It seems that some people are getting confused about the upgrade version. The first time you purchase Lightroom you have to pay the full price. The trial version is actually the full version, it just has a time limiter on it. The upgrade version depends on a serial number from a previous version (i.e. Lightroom 3, Lightroom 4, etc.) as well as the serial number from the upgrade version to be activated. So it appears that you will have to negotiate with Adobe customer support to resolve your problem.

  • I'm using 3.6.18. Can I download a stand alone newer version? Don't want to lose present version.

    3.6.18 working well, but would like to try a newer version without overwriting this version.

    Which Firefox version do you currently have?
    You have a user agent that is corrupted and that identifies you as Firefox/3.0.10 instead of Firefox 3.6.25
    *Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.25) Gecko/20111212 Firefox/3.0.10 NET_mmhpset GTB7.1
    See:
    *https://support.mozilla.org/kb/Finding+your+Firefox+version
    *https://support.mozilla.org/kb/Websites+or+add-ons+incorrectly+report+incompatible+browser
    *http://kb.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default
    What do you mean with <b>edit "in code"</b>?
    Can you attach a screenshot?
    *http://en.wikipedia.org/wiki/Screenshot
    Use a compressed image type like PNG or JPG to save the screenshot and make sure that you do not exceed the maximum file size (1 MB).

  • Got a new computer with windows 8 bought some tunes but cannot sync them into my nano (version 6) don't know much about computers

    cannot figure out how to sync the new music I have purchased from itunes store to my ipod my new computer has windows 8 I can see the music in my library but no task pane appears to the left so I can sync music I do not know too much about computers so can anyone help me?

    In the latest version of iTunes, the sidebar (on the left side) may be hidden.  To show it, go up to the menu bar, under View, and select Show Sidebar.
    The iPod can be loaded manually (by dragging items to it from the iTunes library), or using automatic syncing (by setting up the iPod's Music tab in iTunes).  After making the sidebar visible, if you have questions about using automatic syncing or the manual method to load the iPod, please post back.

Maybe you are looking for

  • CS2 in Windows 8

    Had Photoshop CS2 loaded on computer running Windows 7 - no problem. Just loaded it onto new computer running Windows 8. Loaded OK according to on-screen messages but when I run the programme I tries to fill in Registration and got the message "Could

  • Can you connect a wireless Mac keyboard to an iPad?

    Can you use a Mac wireless keyboard with an iPad?

  • In desperate help with Dreamweaver Forms

    I am looking to create a textfield within my form for viewers to enter a certain phrase or code to enable them to view my next page on my website. In other words, I am creating a simple game on dreamweaver were viewers have to enter a code within a t

  • Dispute Management - Buffer Process

    Hi Guru's, When creating a dispute for some reason, at no particular interval, I am getting the message to run "FDM_BUFFER_PROCESS". Question: 1. What does this indicate? 2. Why does this happen?

  • Adobe forms  - format G_RAW - output tray

    Hello, I was using formats of device type (DINA4) to print sapscript formulars in different output trays. Now I have switched to adobe forms. Adobe forms are always printed (as I've understood) in G_RAW format, and not in DINA4 format as I want. For