4.0 beta 9 - pop up "save image as ..." sometimes does not work

is the 3rd time that I found "save image as ..." does not work
the cursor chages to processing in background but when you move the mouse it comes back to the ready pointer and nothing happens.The expected behaiveour is to show the directory dialog to cho0se the name and where to save the file.
Also I try in the File menu the "Save Page as" without any success (no directory dialog neither).
Actually I have the brower open and under this conditions how can I do a dump to help the developer to debug this?

Create a new profile exclusively for the 4.0 beta version and create a desktop shortcut with -P "profile" appended to the target to launch that profile.
* http://kb.mozillazine.org/Testing_pre-release_versions
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]]

Similar Messages

TWO CRITICAL BUGS: 1) File, "Save Page As" and 2) right-click the picture and select "Save Image As", both do not work at all in Firefox 27, 28, and 29!

Note: capitals are used only to highlight important words.
PLEASE, TAKE THESE COMMENTS ON TWO CRITICAL BUGS VERY SERIOUSLY BECAUSE THE BUGS DESCRIBED BELOW ARE SO CRITICAL THAT I CANNOT USE THE LATEST VERSION OF FIREFOX UNLESS THEY DO NOT APPEAR IN THE LATEST VERSION AND THEREFORE I AM FORCED TO REVERT BACK TO FIREFOX 26.
I have Windows 7 64-bit and Firefox 26. I could not install Firefox 27, 28, and 29 due to the persistent presence of the two critical bugs described below. I have 8 GB of RAM and an Intel quad-core processor and a lot of hard disk space available.
I installed Firefox 27 and then Firefox 28 a while back and these two bugs described below were still present and now I have just checked again with Firefox 29 by installing it and yet again, these two bugs described below are present!! UNBELIEVABLE THAT THESE TWO CRITICAL BUGS ARE STILL PRESENT IN FIREFOX 29 WHEN I CLEARLY INFORMED YOU ABOUT THEM IN THE HELP, SUBMIT LINK OF FIREFOX!!
I am forced to revert to Firefox 26!
First, I use Windows 7 64-bit and I always use Firefox with at least 120 tabs opened. BUT I have 8 GB of RAM, an Intel core i7 quad-core processor and more than 1 TB of hard disk space. Consequently, I do not understand why I would have these two critical bugs.
With Firefox 26, I also have at least 120 tabs opened when I start Firefox and I do not have the two critical bugs described below, therefore I do not believe that the number of tabs is the reason of the two critical bugs that are present in Firefox 27, 28, and 29.
---FIRST CRITICAL BUG:
When I open ANY web page and do File, "Save Page As", the window that is supposed to open to locate the folder where I want to save this web page does NOT open at all, even if I wait a long time to see if it opens.
Same problem happened with Firefox 27, 28, and now 29!! When I reverted back to Firefox 26, this problem did NOT happen anymore!
---SECOND CRITICAL BUG:
When I use Google Images, for instance entering model in the search field of Google Images and then pressing enter.
Then I select any picture, open to a new tab this selected picture, then open a new tab by selecting the option View for this picture. Then right-click the picture and select "Save Image As".
Again, the window that is supposed to open to locate the folder where I want to save this picture does NOT open at all, even if I wait a long time to see if it opens.
Same problem happened with Firefox 27, 28, and now 29!! When I reverted back to Firefox 26, this problem did NOT happen anymore!
---THESE TWO CRITICAL BUGS DO NOT APPEAR WHEN I USE INTERNET EXPLORER 11.
I have no idea if you will be able to reproduce these two critical BUGS but I can assure you that they are not present when I use Firefox 26 and they are present when I use Firefox 27, 28, and 29. More, be aware that I have at least 100 tabs opened but I also have this same number of tabs opened in Firefox 26 and yet I do not experience these two critical bugs when I have Firefox 26!
Once again, these two bugs touch at two vital, critical very basic functions of Firefox and therefore I will NOT be able to use any version above 26 if these two bugs are still present, as they are present in Firefox 27, 28, and now 29!!!
Please, make it a priority to solve these two critical bugs. Thanks.
I did read a post related to the same issues “Firefox stops responding when trying to "save page" or "save image" | Firefox Support Forum | Mozilla Support” at https://support.mozilla.org/en-US/questions/991630?esab=a&as=aaq
I am still reading it again to try to figure out exactly what the person did to make his problems be solved, as the post is not clear at all on what solved the problems!
In any case, all the suggestions proposed in this post do not work and I surely cannot do a system restore when it is obvious that the two bugs do not appear in Internet Explorer.

First, I sent an email to the author of PhotoME to inform him of the serious issues his addon caused with Firefox latest versions.
Now, for those of you who do not have the PhotoME addon and yet experience the same problem that I had and that I described above, I suggest the following strategy.
As PhotoME did cause these problems with Firefox latest versions, I am pretty covinved other addons probably might cause these problems too. Therefore, adopt the following method.
Test one addon at a time to see if this particular addon is behind your Firefox issues like the ones I had.
So, disable one addon only at a time. Then close your Firefox and restart it from scratch and see if you still have your Firefox problems. You must restart the Firefox browser from scratch. If you still have these Firefox problems, re-enable the disabled addon, restart your Firefox (again!) and repeat the same method for every single addon that you have.
Try to be selective by choosing first addons that are more likely to cause your Firefox problems such as not very well-known or not very popular addons (like it was the case for the PhotoME addon).
If this method works or if it does not work, report it on this web page so that others can be helped with your comments.
I hope this method will help you because I was really upset that I had these Firefox problems and I first thought it was the fault of Firefox, only to discover later that this PhotoME addon was the culprit and had caused me such upset.

Russell Brown " Image Processor Pro " does not work under CC

I just switched from Photoshop CS 6 to CC and use Russell Brown "Image Processor Pro". Unfortunately does not work that under CC. I also want to install the fix but we probably only applied to CS6.
Does anyone have a solution to the problem.
Here the German error message: https://dl.dropboxusercontent.com/u/12684660/CC_IPP.jpg
Post translated with google Translater from the German.

I installed Image Processor Pro quite some time ago. I extracted the extension package and just copied the two files "Image Processor Pro.xml" and "Image Processor Pro.jsx" into Photoshop's versions Presets\Scripts. I normally install things I add to Photoshop into my own folders outside any Adobe installation folder. Image Processor Pro is an exception because I did not want to modify X's code. Image Processor Pro is coded in a way to find which version of Photoshop is being run from and looks for its default xml file in that version Presets\scripts\ folder.
The script may save your modficaions to its defalt xml file into you user ID application data areas. And you can save you own Image Processor Pro presets configurations.
I run Windows not Mac though.

Save and Quit tabs does not work properly.

When asked to Save and Quit tabs for the specific session is selected, Firefox does not restore tabs at the next session.
I have read the posts where it is suggested to change the settings and simply never clear the history. However this is not the way that Firefox behaved in older versions, NOR IS IT A SOLUTION due to the following:
The pop-up on exit to Save and Clear is clearly asking the user if that specific session should be remembered and then clearing the history should be superseded by saving instead. Otherwise, what is the point of asking the user to save? A pop-up warning saying that the tabs will not be remembered would be more appropriate.
Regardless, the user has been asked if this specific session should be remembered, and this clearly being the last choice done by the user, supersedes the prior settings for this one specific session. The tabs should be remembered, as the user has instructed (and Firefox used to do in the past), and yet Firefox opens a new session having dumped the information.
Changing the settings to remembering the history instead, does not serve people that want most times to clear it. This would then mandate a manual clearing of history every time before a session is ended instead.
This will need a permanent fix/rollback to the way Firefox used to behaved in these circumstances in older versions.

After transferring musics to the device selecting by mass storage mode you need to follow this
Go to Device Menu> Music> Music Player> Option> refresh library
have you followed this? if this does not help could you please provide more information sothat someone can help you to solve your problem?
A. Device details ( type *#0000#)
B. System Information details ( Help About- Ovi Suite- System Information : Copy & paste )
Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
It will help me to serve you better !!!!!
Thanking You

Generate image assets "default" does not work in CC but does in CC 2014

When I use "default -this" in a layer in photoshop cc it does not change the file names. In CC 2014 the same file works as expect.

I installed Image Processor Pro quite some time ago. I extracted the extension package and just copied the two files "Image Processor Pro.xml" and "Image Processor Pro.jsx" into Photoshop's versions Presets\Scripts. I normally install things I add to Photoshop into my own folders outside any Adobe installation folder. Image Processor Pro is an exception because I did not want to modify X's code. Image Processor Pro is coded in a way to find which version of Photoshop is being run from and looks for its default xml file in that version Presets\scripts\ folder.
The script may save your modficaions to its defalt xml file into you user ID application data areas. And you can save you own Image Processor Pro presets configurations.
I run Windows not Mac though.

Latest USB Image (2009.08) does not work

So I downloaded the archlinux-2009.08-netinstall-i686.img USB image and UNetBootin for Windows, and it did not install the image correctly to my USB drive.
I have plenty of space (it's an 8GB drive), and I have successfully put a number of other distros on the drive, and all while using UNetBootin on Windows.
I even tried installing it on my linux machine using the dd command and the instructions on this page: http://wiki.archlinux.org/index.php/Ins … _USB_stick
Anyone else having these problems?
Can't have fun trying Arch out if I can't even put it on my install media

Ashren wrote:
Try downloading the image again it may be corrupt. Have you checked md5sum?
You can also try the testing builds found here: http://bbs.archlinux.org/viewtopic.php?id=94687
or tpowa's images: http://bbs.archlinux.org/viewtopic.php?id=95503v
I tried the April 19th image, which according to what I read replaces the .img USB image. It worked with unetbootin, but once I booted into it, there was some error (can't remember it, gonna have to try it again to see the actual error).
tomk wrote:How exactly did this not work? Was there an error message? What was the output in response to the dd command?
Can't remember, didn't write it down...but it is inconsequential as the image wasn't working with any method.

My screen saver on my new mac book pro stopped working. I have rebooted, changed screen saver mode it still does not work

My screen saver on my MacBook Pro stopped working. I have rebooted and tried resetting the screen saver, still not working.

We are going to delete a hidden file.
Finder > Go Menu > Go to Folder and type or paste
~/Library/Preferences
and scroll down until you see
com.apple.systempreferences.plist
drag the one you can (may see two) to the Trash, reboot, reset your System Preferences again.

Motion 5 pop-up menu in shape toolbar does not work

In the shape toolbar of Motion 5 the pop-up menu's don't work. I can only use the top options like rectangular but no circle or line.
Same with the other buttons in this menu.
Does anybody have an idea how I can fix this?
Thanks! Remco

They can be overly touchy. Click and hold a copule of seconds.. Try double clicking.

Quick save does not work

On my Pavilion dv7-4270us laptop the quick save, f5 key, feature does not work on any game I load. The options are grayed out and says unmappable or just don't work. The quick save does work for the same games on my Toshiba laptop running vista. The HP is running 7. Needles to say this is rather annoying. Any ideas as to why this is?

I didn't try that. But the problem is when I load any game the quick save function in the control set up menu of the game always states the quick save and quick load options for the game are not mappable. Most times it is the f5 and f9 key that is set to those functions but not always. As I stated before these functions work on my Toshiba Laptop but not on the HP. HP running 7 Toshiba runnig vista. The HP is less then one month old. Thanks for the help with this. I hope you can figure this. I have no idea.

Save Panel Image / Screen Image does not work as an Executable

The Save Panel Image / Screen Image does not work as an Executable. It looks like there is a conflict with the Path, since the Screen_Image.exe is launched as Screen_Image.vi. I've tried this function both ways with the path name change Screen_Image.exe AND Screen_Image.vi.

Any chance you might be able to post some code illustrating what you are talking about?
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

I selected save password; but firefox does not have it in the list of saved passwords??

I selected save password; but Firefox does not have it in the list of saved passwords??

Firefox will only remember a password if you click the Remember button on the sliding bar at the top that opens when Firefox detects a password.<br />
If you mean a check box on a web page to remember you then such a choice is stored in a cookie on your computer.
* Websites remembering you and automatically log you in is stored in a cookie.
* Create an allow cookie exception (Tools > Options > Privacy > Cookies: Exceptions) to keep such a cookie, especially for secure websites and if cookies expire when Firefox is closed.
* In [[Private Browsing]] mode all cookies are session cookies that expire if that session is ended, so websites won't remember you.
* Do not use [[Clear Recent History]] to clear the "Cookies" and the "Site Preferences"
Clearing "Site Preferences" clears all cookies, images, pop-up windows, software installation, and password exceptions.
See:
* [[Cookies]]
* [[Enabling and disabling cookies]]
* [[Remembering passwords]]

Shared Components Images Create Image does not work

I am using oracle XE on Windows XP.
Uploading an image for an application does not work.
Home>Application Builder>Application 105>Shared Components>Images>Create Image
It goes wrong when I try to upload the image:
- Iexplorer gives an error 404 after pressing the Upload button.
- Firefox just gives an empty page.
When I try to refresh the resulting page (do another post) I get the following error:
Expecting p_company or wwv_flow_company cookie to contain security group id of application owner.
Error ERR-7621 Could not determine workspace for application (:) on application accept.

Hi Dietmar,
After setting the language to English (USA) [en-us] it works for +- 50 % of the uploads.
Below is my tracefile.
Dump file e:\oraclexe\app\oracle\admin\xe\bdump\xe_s001_2340.trc
Wed Nov 23 19:03:17 2005
ORACLE V10.2.0.1.0 - Beta vsnsta=1
vsnsql=14 vsnxtr=3
Oracle Database 10g Express Edition Release 10.2.0.1.0 - Beta
Windows XP Version V5.1 Service Pack 2
CPU : 2 - type 586
Process Affinity : 0x00000000
Memory (Avail/Total): Ph:267M/1014M, Ph+PgF:1431M/2444M, VA:1578M/2047M
Instance name: xe
Redo thread mounted by this instance: 1
Oracle process number: 15
Windows thread id: 2340, image: ORACLE.EXE (S001)
------ cut ------
*** 2005-11-23 19:50:44.718
*** ACTION NAME:() 2005-11-23 19:50:44.718
*** MODULE NAME:() 2005-11-23 19:50:44.718
*** CLIENT ID:() 2005-11-23 19:50:44.718
*** SESSION ID:(26.18) 2005-11-23 19:50:44.718
Embedded PL/SQL Gateway: /htmldb/wwv_flow.accept HTTP-404 ORA-01846: not a valid day of the week
*** SESSION ID:(27.19) 2005-11-23 19:50:51.937
Embedded PL/SQL Gateway: /htmldb/wwv_flow.accept HTTP-404 ORA-01846: not a valid day of the week
*** 2005-11-23 19:50:59.078
*** SERVICE NAME:(SYS$USERS) 2005-11-23 19:50:59.078
*** SESSION ID:(27.21) 2005-11-23 19:50:59.078
Embedded PL/SQL Gateway: Unknown attribute 3
Embedded PL/SQL Gateway: Unknown attribute 3
Strange error... there is nothing in my form that is related to dates...
Kind regards,
Pieter

I try to drag a photo folder into lightroom 4 on my MAC, lightroom fails to open and a 'Corrupt Catalog Detected' screen pops up. Clicking on 'repair catalog' does not work either. Any suggestions?

I try to drag a photo folder into lightroom 4 on my MAC, lightroom fails to open and a 'Corrupt Catalog Detected' screen pops up. Clicking on 'repair catalog' does not work either. Any suggestions?

I'll have to get a better instructor on deleting the preferences since when I've doen it in the past nothing is there when I open LR the catalog is gone. I assumed that was what was supposed to happen so I start importing all over again. But that is a different issue...
The problem has been happening since at least the beta of 3 came out and I saw other posts back then saying they had similar issues but I assume it was a beta thing... But since the full version came out and through each incremental change I haven't seen an improvement. If anything it has gotten a little worse with time.
I have to try to be careful to not be in a hurry and start clicking around in the catalog as it seems fragile until it has cataloged all the photos in the library. When starting you will see the numbers populate the folders very slowly and I try not to click on a folder that hasn't had the number of photos pop up yet. Also draging the slider down to see more of the cataloge can have the same affect and crash the system.
I wish I had more to go on.. I believe it may be a resources issue but as I went from 3-4 Gig I thought it would get better. I don't have big programs running but did have outlook and word running in the background along with firefox and chrome.
And yes it only happens on this HP desktop (it's 2+ yrs old) and may be showing it's age a bit. My laptop which has less resources doesn't have the issue.. I have them sharing the catalog. (not at the same time) just when I'm working in other places in the house.
Jeff

MDT - Custom Reference Image does not work with Task Sequence, normal Windows 7 Enterprise Iso media works fine.

Hi,
Our MDT server is acting strange!
I have previously had this system running without problem - i could both capture and deploy computers as is and no changes have been made to mdt.
But my latest capture does not work. When i capture my reference maching in my VM environment it completes without errors and i can import the latest wim file.
When i deploy the tast sequence, it install the custom Wim image, but it ends up with "login" screen as the administrator i have entered for the capture/deploy sequence, but it goes to stop at this point and applications is not installed.
If i change the ISO in the task sequence under Install OS step, to a clean Win7 install media then the capture completes and install applications.
I have also tried to:
Capture reference without password
Capture reference without Windows updates
Customsettings.ini, bootstrap, BDD.log and SMSTS.log to be found here: https://onedrive.live.com/redir?resid=ED5029A20300B814!365&authkey=!AALV1b2ubD0laEE&ithint=folder%2cini
Hope you will be able to assist,
Regards,
Anders

if you have noticed your smsts.log, there is same error multiple -
Executing in non SMS standalone mode. Ignoring send a task execution status message request
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
User did not specify local data drive TSManager
1/23/2015 12:50:37 PM 1656 (0x0678)
Volume A:\ is not a fixed hard drive TSManager
1/23/2015 12:50:37 PM 1656 (0x0678)
Volume D:\ is not a fixed hard drive TSManager
1/23/2015 12:50:37 PM 1656 (0x0678)
Volume X:\ is not a fixed hard drive TSManager
1/23/2015 12:50:37 PM 1656 (0x0678)
Volume Z:\ is not a fixed hard drive TSManager
1/23/2015 12:50:37 PM 1656 (0x0678)
TSM root drive = TSManager
1/23/2015 12:50:37 PM 1656 (0x0678)
We do not find an available volume to store the local data path
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Set a global environment variable _SMSTSNextInstructionPointer=1
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Set a TS execution environment variable _SMSTSNextInstructionPointer=1
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Set a global environment variable _SMSTSInstructionStackString=0
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Set a TS execution environment variable _SMSTSInstructionStackString=0
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Save the current environment block TSManager
1/23/2015 12:50:37 PM 1656 (0x0678)
pszPath[0] != L'\0', HRESULT=80070057 (c:\qfe\nts_sms_fre\sms\framework\core\ccmcore\path.cpp,58)
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Filesystem::Path::Add(sEnvPath, EnvDataFileName, sEnvPath), HRESULT=80070057 (e:\nts_sms_fre\sms\framework\tscore\environmentlib.cpp,639)
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Failed to save environment to (80070057)
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
TS::Environment::SharedEnvironment.saveEnvironment(szPath), HRESULT=80070057 (e:\nts_sms_fre\sms\client\tasksequence\executionengine\executionenv.cxx,842)
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Failed to save the current environment block. This is usually caused by a problem with the program. Please check the Microsoft Knowledge Base to determine if this is a known issue or contact Microsoft Support Services for further assistance.
The parameter is incorrect. (Error: 80070057; Source: Windows)
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
SaveEnvironment(), HRESULT=80070057 (e:\nts_sms_fre\sms\client\tasksequence\executionengine\executionenv.cxx,420)
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Failed to persist execution state. Error 0x(80070057)
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Failed to save execution state and environment to local hard disk
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Start executing an instruciton. Instruction name: Gather local only. Instruction pointer: 1
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Set a global environment variable _SMSTSCurrentActionName=Gather local only
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
Set a global environment variable _SMSTSNextInstructionPointer=1
TSManager 1/23/2015 12:50:37 PM
1656 (0x0678)
what about the mass storage driver in your boot image, is it updated?
Md.Waseem Please remember to click “Mark as Answer” on the post that helps you. Thank you.

Why does iMessages does not work properly ? Please help me ! Its works better with the previous version if compared with the latest iOS

Why does iMessages does not work properly ? Please help me ! Its works better with the previous version if compared with the latest iOS

Many, many thanks for both of you Todd and Rick.
to Rick:
I suppose you mean the Color Settings in Project Settings as follows:
- Working Space: None
- Match Legacy ... Gamma Adjustments checked ON
But it does not correct the colors in effects. And checking or unchecking Make Movie/Output Module Settings/Color Management/Profile/Preserve RGB does not make any difference.
to both of you:
Those parts of the video image that does not have color effects are just fine. In these parts the color is preserved when reimporting to FCP. However, those parts having color effects (except Levels, as decribed earlier) have altered color results. So, only the parts having effects affecting color are misinterpreted in the image area. The mismatch is of course seen in AE, before making the movie.
What I ment with "Color Management not working properly" is that (instead of "disabling" it) Color Management does not seem to be able to correct this "misinterpretation" or difference in effect handling between AE 6 and 10.
So, would you have any solution for this problem?
Again, many thanks for your fast replies!

4.0 beta 9 - pop up "save image as ..." sometimes does not work

Similar Messages

Maybe you are looking for