4.0 EA1 - Data Modeler does not show columns data types correctly

Data Modeler shows all columns data types as 'unknown'.

Hi,
you need to check "system data types" directory and it contents. Its default location in SQL Developer is sqldeveloper\sqldeveloper\extensions\oracle.datamodeler\types
Check "Preferences>Data Modeler>Default system data types directory" setting. If it's empty then copy defaultdomains.xml from previous installation to directory above.
If it's not empty then you need to copy types.xml and defaultRDBMSSites.xml from default location to directory set as "Default system data types directory".
Philip

Similar Messages

Why MSAccess database shows data but does not show columns and DDL in edit mode in jdeveloper?

Sir,
My developer ver is 12.1.3.0.0.
I create a connection to MS Access database, this database shows data as bellow in jdeveloper databases window
But when I open any table in Edit mode like bellow it does not show any columns and DDL and give an error like bellow
Similarly when I try to create view objects on these tables then on data controls the view object also doesn't show any columns like bellow
What could be the reason any help on this issue
Should I use MS Access or not but I want to use ms access for very small databases.
Regards

If you look into the certification matrix at Oracle JDeveloper and ADF 12c (12.1.3) Supported Systems
You'll see that ms access is not supported.
You can use oracle xe which is free for your project.
Timo

BI Publisher Using Answers As Data Source Does Not Show Anything in Catalog

Created A New Report. Used BI Answers as Data Source. Tried To Use Drop Down
and BI Catalog Does Not Show Any Data.
Any Suggestions?
Thanks
Raghu

Hi Raghu,
I had the same problem here. I was working with OBIEE 10.1.3.2, after a lot of searching an reading decided to upgrade to 10.1.3.3 and the problem was solved.
Hope this helps. Regards,
Jeroen

Search Item drop-down does not show any data for Advanced Search.

Hi,
I have a requirement to add a new criteria to the existing Advanced Search region of 'My Employee Information' in Manager Self Service responsibility. I substituted the AdvancedSearchVO to include the new column. Using personalization i did the below steps to show the new column in the page,
1) Created a 'Message Styled Text' item under Table Layout region to display the result. I associated the View Instance (AdvancedSearchVO1) and View Attribute (AttrColumn).
2) In Advanced Search Panel created a new CriteriaRow and set the 'Search Allowed' property to True.
3) In Advanced Search Mappings i tried to create the new mapping but the Search Item drop-down does not show any of the CriteriaRow item. But Results Item shows the 'Message Styled Text' item created in step 1 above.
Any idea what i would be missing becasue of which 'Search Item' property does not show any data?
I am using OAF version 12.1.1.
Thanks, Suresh

Hi,
I faced the same situation but i still waiting for the solution.. this is my problem's thread..
Addition of LOV Search Filter using Personalization
But when i tried to create a new custom page with advanced table and created a new LOV column via personalization. i was able to create new search mapping.. but this is not happening in the seeded page case :(.
I m also looking for solution...if any one can provide some inputs on it , will be highly appreciated.
Thanks
Renu

Bex report does not show loaded data at once

Hi experts,
Why Bex report does not show loaded data at once after loading is finished but after some time?
Could be the reason of it:
a) huge amount of data in infocube.
b) there are no deleting/creating indexes before/after loading, because it takes too much time
c) anothe reason?
Thank you,
Tigr_Z

Hi Tigr,
A and B both can be the reasons behind, but normally in case of B option the results on report output can be wrong like duplicates sort of showing you double figures.
C - it can be resource issue, so please look into all and double check with basis if thats the case.
Regards
Sunny

Form results does not show column headers

I created a form and when I enter info and then view the results, the results page does not show column headers. How do I correct this?

I just found out that the engineered version (10g) is also quite strange:
http://public.ceving.de/2012050900/postaladdress_10g.png
It shows the values in the columns for the types.
This looks very buggy.
Is it not recommended to create views with the data modeler?
Edited by: 931739 on 09.05.2012 06:38

Metric shows real time value but does not show historical data

I am using OEM 12c.I am facing an issue and I don't know where to look for problem.
I had created one customized metric for percentage flash recovery area through metric extension.I deployed to it target databases.
When I check it through Database --> All Metrics it shows me real time value for metric,Collection schedule,upload interval and last upload time.IT is all fine.
When I check metric value history,
For all the columns like Last Known Value,
Collection Time stamp,
Average Value,
High Value,
Low Value
it shows no data.It even does not show anything in Metric Value History graph.
Even the metric test in Metric Extension works fine.
All the client agents are uploading the the data to OEM successfully.
Any help,guide is appreciated.

bit late but there are two options on metric creation "Alerting Only" or "Alerting and Historical Trending" - I assume you need the latter to show history so was this option used?

Does not show cellular data tab

Can anyone help me. My ipad does not show the cellular date tab in the settings, i tries to restore it but it didnt work. ios 4.3.5

Who is your cell provider, and where are you located?

Flash drive no longer works with MacBook Pro. Now says it is unformatted, but no info what to do and not lose my data. Does not show up despite multiple prior uses on the same computer.

Upgraded to OS Mavericks in November. Flash drive that worked fine previously with Lion and worked several times with Mavericks. Now says the 8GB jump drive (Lexar) is unformatted. Disk Utility First Aid seem unavailable. It sees the drive, but on the far left left, and when highlighted, nothing can be done with it.
How do I recover my information or reformat it without losing my data?

I am MikeMacBP2013. Cannot figure how to reply to Kappy's comment. Kappy, your comment did not really help me. My concern is how to save my data, not wipe and use a $10 USB drive.
In the past two hours, I wasted most of it trying to use a software program, Disk Drill by Cleverfiles, that offers a "free" version. The free version does not recover your data for you. It is not a free 30 day trial. It is deceptively advetised - it will recover data but you will not see your data untless you pay them almost $100.
Instead of trying to recover the data on the USB drive, this program ran a recovery on my computer hard drive and any disk image it could find on my computer until I stopped and deleted it. Apparently, it collects and keeps data recovered locked unless you pay for a key to download your data. This is not clearly presented up front. Had I known, I would never have put their software on my computer.
I need direction to a reliable recovery program that is not this sneaky and deceptive. I stopped it when I discovered it was not doing what I had clicked for it to do, and removed the software.
I am looking for a recommendation for a program that will do what Apple Disk Utility does not do - restore the formatting that may have been corrupted, or at least recover my data files so I can put them on other portable media.
I recently installed a CalDigit Thunderbolt Dock to get USB 3.0 on my early 2011 Mac. I suspect this may have contributed to this disk failure but will have to contact their tech support tomorrow.
Thanks for any suggestions for a reliable free or reasonably priced recovery software that someone can attest from using really works.

View does not show column type

I have two views containing a column, which is defined exactly in the same way. One view shows the column type as VARCHAR2 (200 CHAR) and the other does not show anything as the type.
Here is the screen shot:
http://public.ceving.de/2012050900/postaladdress.png
First question: why is there a difference?
Second question: why is the type VARCHAR2 although the modeler does not know VARCHAR2 but only VARCHAR as a column type?
Here are the definitions of the views:
This is "user_status":
WITH user_status_data AS
(SELECT work_user_status_data.person_id,
MAX(work_user_status_data.startdate) AS startdate
FROM work_user_status_data
GROUP BY work_user_status_data.person_id
SELECT person.id AS tmdid,
person_a.lastname,
person_a.firstname,
person_a.email AS emailaddress,
person_a.address
|| ', '
|| person_a.zipcode
|| ' '
|| person_a.city
|| ' '
|| person_a.country AS postaladdress,
person_a.phone,
person_a.mobile,
person_a.company AS organization,
person_a.orgunit_abbr AS orgunit,
work_user_status_data.pwdresetflag,
work_user_status_data.lockaccount,
work_user_status_data.primarypwd,
work_user_status_data.expdate,
work_user_status_data.iamtid,
work_user_status_data.startdate,
work_user_status_data.stopdate,
'IN PROGRESS' AS status
FROM person_a
INNER JOIN ts
ON ts.id = person_a.ts_id
INNER JOIN person
ON person.id = person_a.person_id
INNER JOIN user_status_data
ON person.id = user_status_data.person_id
INNER JOIN work_user_status_data
ON user_status_data.person_id = work_user_status_data.person_id
AND user_status_data.startdate = work_user_status_data.startdate
WHERE ts."until" IS NULL
And this is "work_user_status":
SELECT person.id AS tmdid,
person_a.lastname,
person_a.firstname,
person_a.email AS emailaddress,
person_a.address
|| ', '
|| person_a.zipcode
|| ' '
|| person_a.city
|| ' '
|| person_a.country AS postaladdress,
person_a.phone,
person_a.mobile,
person_a.company AS organization,
person_a.orgunit_abbr AS orgunit,
work_user_status_data.pwdresetflag,
work_user_status_data.lockaccount,
work_user_status_data.primarypwd,
work_user_status_data.expdate,
work_user_status_data.iamtid,
work_user_status_data.startdate,
work_user_status_data.stopdate,
work_user_status_data.action,
work_user_status_data.progress
FROM person
INNER JOIN person_a
ON person.id = person_a.person_id
INNER JOIN work_user_status_data
ON person.id = work_user_status_data.person_id
INNER JOIN ts
ON ts.id = person_a.ts_id
WHERE ts."until" IS NULL
Edited by: 931739 on 09.05.2012 06:37

I just found out that the engineered version (10g) is also quite strange:
http://public.ceving.de/2012050900/postaladdress_10g.png
It shows the values in the columns for the types.
This looks very buggy.
Is it not recommended to create views with the data modeler?
Edited by: 931739 on 09.05.2012 06:38

4.0 EA1 - Data Modeler does not open saved models

Hi,
When trying to open a Data Modeler design created by Data Modeler 3.3.1.748, the Logical Model is empty (has no objects) and the Relational Model is not opened. Right clicking on the Relational_1 node and attempting to open the Relational Model yields an empty Relational Model (again no objects). Since the Relational Model is empty I can't even try to open the Physical Model.
I am able to successfully import DDL and Data Dictionary objects into a new model, however, after saving the model, If I try opening it with SQL Dev 4.0 or SQL Dev 3.2.20 with the 3.3.1.748 version of Data Modeler, none of the models are properly opened as above.
Finally when closing a Data Modeler Design, the entire Data Modeler Browser tree disapears (the browser pane remains but is empty). The only apparent way to recover the browser tree is to restart SQL Developer.

I've started from a fresh install of EA1 without importing settings from v3.2. Changed my look and feel to match my OS (Windows) enabled logging and set the logging directory.
Now when I start DataModeler I get the following:
2013-07-22 15:46:52,597 [AWT-EventQueue-0] ERROR FileManager - getDataInputStream: Can not read data
java.io.FileNotFoundException: C:\Program Files\SQLDeveloper\SQLDev-4.0.0.12.27\sqldeveloper\extensions\oracle.datamodeler.4\types\types.xml (The system cannot find the path specified)
        at java.io.FileInputStream.open(Native Method)
        at java.io.FileInputStream.<init>(FileInputStream.java:138)
        at oracle.dbtools.crest.model.persistence.FileManager.getDataInputStream(FileManager.java:285)
        at oracle.dbtools.crest.model.persistence.FileManager.getDataInputStreamWithoutExtension(FileManager.java:254)
        at oracle.dbtools.crest.model.persistence.XMLPersistenceManager.getInputStreamFor(XMLPersistenceManager.java:894)
        at oracle.dbtools.crest.model.persistence.xml.AbstractXMLReader.getInputStreamFor(AbstractXMLReader.java:216)
        at oracle.dbtools.crest.model.persistence.xml.AbstractXMLReader.recreateObject(AbstractXMLReader.java:143)
        at oracle.dbtools.crest.model.persistence.XMLPersistenceManager.readSystemInit(XMLPersistenceManager.java:564)
        at oracle.dbtools.crest.model.design.DesignSet.createElement(DesignSet.java:53)
        at oracle.dbtools.crest.swingui.ApplicationView.addDesign(ApplicationView.java:2322)
        at oracle.dbtools.crest.swingui.ApplicationView.<init>(ApplicationView.java:403)
        at oracle.dbtools.crest.swingui.ApplicationView.getInstance(ApplicationView.java:2123)
        at oracle.dbtools.crest.fcp.DataModelerAddin.initialize(DataModelerAddin.java:520)
        at oracle.ideimpl.extension.AddinManagerImpl.initializeAddin(AddinManagerImpl.java:496)
        at oracle.ideimpl.extension.AddinManagerImpl.initializeAddin(AddinManagerImpl.java:483)
        at oracle.ideimpl.extension.AddinManagerImpl.initializeAddin(AddinManagerImpl.java:520)
        at oracle.ideimpl.extension.ExtensionManagerImpl._loadExtensionHooks(ExtensionManagerImpl.java:1948)
        at oracle.ideimpl.extension.ExtensionManagerImpl.__loadExtensionHooks(ExtensionManagerImpl.java:1902)
        at oracle.ideimpl.extension.SameThreadExtensionQueueLoadStrategy.load(SameThreadExtensionQueueLoadStrategy.java:28)
        at oracle.ideimpl.extension.SameThreadAndSwingWorkerMixedStrategy.load(SameThreadAndSwingWorkerMixedStrategy.java:22)
        at oracle.ideimpl.extension.ExtensionManagerImpl.fullyLoadExtension(ExtensionManagerImpl.java:1651)
        at oracle.ide.osgi.extension.internal.ClassLoaderProxy.fullyLoadExtensionIfNeeded(ClassLoaderProxy.java:162)
        at oracle.ide.osgi.extension.internal.ClassLoaderProxy.loadMetaClass(ClassLoaderProxy.java:130)
        at javax.ide.util.MetaClass.toClass(MetaClass.java:104)
        at javax.ide.util.MetaClass.toClass(MetaClass.java:95)
        at javax.ide.util.MetaClass.newInstance(MetaClass.java:138)
        at oracle.ide.javaxide.Util.createInstance(Util.java:62)
        at oracle.ide.javaxide.Util.createInstance(Util.java:42)
        at oracle.ideimpl.controller.MetaClassController.getDelegate(MetaClassController.java:139)
        at oracle.ideimpl.controller.MetaClassController.handleEventWhenExtensionNotInitialized(MetaClassController.java:58)
        at oracle.ideimpl.controller.ControllersHook$RuleBasedController.handleEventWhenExtensionNotInitialized(ControllersHook.java:741)
        at oracle.ideimpl.controller.MetaClassController.handleEvent(MetaClassController.java:50)
        at oracle.ide.controller.IdeAction$ControllerDelegatingController.handleEvent(IdeAction.java:1482)
        at oracle.ide.controller.IdeAction.performAction(IdeAction.java:663)
        at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:1153)
        at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:618)
        at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:2018)
        at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2341)
        at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:402)
        at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:259)
        at javax.swing.AbstractButton.doClick(AbstractButton.java:376)
        at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:833)
        at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:877)
        at java.awt.Component.processMouseEvent(Component.java:6505)
        at javax.swing.JComponent.processMouseEvent(JComponent.java:3321)
        at java.awt.Component.processEvent(Component.java:6270)
        at java.awt.Container.processEvent(Container.java:2229)
        at java.awt.Component.dispatchEventImpl(Component.java:4861)
        at java.awt.Container.dispatchEventImpl(Container.java:2287)
        at java.awt.Component.dispatchEvent(Component.java:4687)
        at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4832)
        at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4492)
        at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4422)
        at java.awt.Container.dispatchEventImpl(Container.java:2273)
        at java.awt.Window.dispatchEventImpl(Window.java:2719)
        at java.awt.Component.dispatchEvent(Component.java:4687)
        at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:735)
        at java.awt.EventQueue.access$200(EventQueue.java:103)
        at java.awt.EventQueue$3.run(EventQueue.java:694)
        at java.awt.EventQueue$3.run(EventQueue.java:692)
        at java.security.AccessController.doPrivileged(Native Method)
        at java.security.ProtectionDomain$1.doIntersectionPrivilege(ProtectionDomain.java:76)
        at java.security.ProtectionDomain$1.doIntersectionPrivilege(ProtectionDomain.java:87)
        at java.awt.EventQueue$4.run(EventQueue.java:708)
        at java.awt.EventQueue$4.run(EventQueue.java:706)
        at java.security.AccessController.doPrivileged(Native Method)
        at java.security.ProtectionDomain$1.doIntersectionPrivilege(ProtectionDomain.java:76)
        at java.awt.EventQueue.dispatchEvent(EventQueue.java:705)
        at oracle.javatools.internal.ui.EventQueueWrapper._dispatchEvent(EventQueueWrapper.java:169)
        at oracle.javatools.internal.ui.EventQueueWrapper.dispatchEvent(EventQueueWrapper.java:151)
        at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:242)
        at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:161)
        at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:150)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:146)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:138)
        at java.awt.EventDispatchThread.run(EventDispatchThread.java:91)
2013-07-22 15:46:52,613 [AWT-EventQueue-0] ERROR AbstractXMLReader - Data inputstream is null (path: types name: types)
For some reason it's trying to read C:\Program Files\SQLDeveloper\SQLDev-4.0.0.12.27\sqldeveloper\extensions\oracle.datamodeler.4\types\types.xml, however prior to running SQL Dev the oracle.datamodeler.4 directory does not exist although an oracle.datamodeler directory (without the dot4) does exist with the types\types.xml file.
If I rename the oracle.datamodeler directory to oracle.datamodeler.4 then the data model opens partially, though all my relationships are missing and probably other stuff as well. Further I get the following in the log:
2013-07-22 15:56:35,902 [AWT-EventQueue-0] INFO DataModelerAddin - Oracle SQL Developer Data Modeler 4.0.0.812
2013-07-22 15:56:59,215 [Thread-22] ERROR XMLTransformationManager - java.lang.NoClassDefFoundError: com/adbs/querybuilder/QueryBuilder
If instead of renaming the oracle.datamodeler directory to oracle.datamodeler.4 I copy it, then everything loads correctly, though models created with SQL Dev 3.2 have errors when opening the Physical Model, but once saved with SQL Dev 4's DataModeler, those errors do not reoccur.
Is the fact that it's trying to read files from a nonexistant oracle.datamodeler.4 directory a bug?
If not what should be in the oracle.datamodeler.4 directory? Obviously not everything in the oracle.datamodeler directory, but at least some of the files are needed.

Sharepoint web analytics does not show any data

Hello,
We installed Sharepoint Web Analytics some days ago (separated application pool).
Installation completed successfully.
Search works fine and returns expected results.
But reports still don't show any data :
Data Last Updated: 15.08.2014 02:00:16 There is no data available for this report. Here are some possible reasons: (1) Web Analytics has not been enabled long enough to generate data; (2)
There is insufficient data to generate this report; (3) Data logging required for this report might not be enabled; (4) Data aggregation might not be enabled at the level required for this report.
What I tried :
connect to website using different users (admin user included)
checked that needed services on server are started (especially analytics services)
restart services Web Analytics Data Processing Service and
Web Analytics Web Service
checked that all services applications are started (WSS_UsageApplication status was
stopped so I started it using Sharepoint 2010 Management Shell)
checked service application associations (especially if Analytics Service Application Proxy is checked)
manual execution of jobs (Web Analytics Trigger Workflows Timer Job, Microsoft SharePoint Foundation Usage Data Import, Microsoft SharePoint Foundation Usage Data Processing)
manual start of incremental crawling
restart IIS
checked scope of data logging (especially if Enable usage data collection and
Enable health data collection are checked)
checked that the .usage file are generated correctly on the disk
checked in the Logging database (WSS_UsageApplication) that the
RequestUsage view contains data collected from the .usage files
checked that data is successfully extracted from the logging database into the staging database (LastLoggingExtractionTime)
checked that data was successfully copied from the staging database to the reporting database (LastDataCopyTime)
checked on the website side that Advanced Web Analytics feature is
Active
recreate web analytics application
checked for any message in ULS logs that could help... I only noticed that error :
The SharePoint Health Analyzer detected an error. Drives are running out of free space. Available drive space is less than twice the value of physical memory. Can it cause the problem ?
All appears to work fine but I can't see any data in the reports.
The thing is that Inventory data is collected successfully and I can see the related reports. Traffic and Search data are still empty.
Anything else I can try ?
Thanks.

Yes I have granted application pool identity full control on the Web Analytics Service Application.
I also checked that Sharepoint 2010 timer service is started.
I can't see anything in the logs that could help, when accessing the reports. The only thing I noticed is this kind of log which occurs
regularly and seems to be an exception :
Enumerating all sites in SPWebApplication Name=SharePoint - 80.
Site Enumeration Stack:
at Microsoft.SharePoint.Administration.SPSiteCollection.get_Count()
at Microsoft.SharePoint.Taxonomy.UpdateHiddenListJobDefinition.Execute(Guid targetInstanceId)
at Microsoft.SharePoint.Administration.SPTimerJobInvokeInternal.Invoke(SPJobDefinition jd, Guid targetInstanceId, Boolean isTimerService, Int32& result)
at Microsoft.SharePoint.Administration.SPTimerJobInvoke.Invoke(TimerJobExecuteData& data, Int32& result)
Maybe it can be the cause ?
I have also cleaned the drive where .usage file are generated so the error "Drives are running out of free space. Available drive space is less than twice the value of physical memory." does not appear anymore.

SelectOneMenu does not show the data from the backing bean

Here is my code:

<h:inputText id="dir"
value="#{myBean.sourceDirectory}"/>

<h:commandButton value="fetch"
actionListener="#{myBean.processFetch}" />

<h:selectOneMenu value="#{myBean.selection}">
<f:selectItems value="#{myBean.dirs}"/>
</h:selectOneMenu>
public class MyBean{
private String sourceDirectory;
private ArrayList<SelectItem> dirs;
public String getSourceDirectory(){
return sourceDirectory;
public void setSourceDirectory(String newDir){
this.sourceDirectory = newDir;
public ArrayList<SelectItem> getDirs(){
return dirs;
public void setDirs(ArrayList<SelectItem> newDirs){
this.dirs = newDirs;
public void processFetch(ActionEvent e){
//For this example, we return some hard coded values
dirs = new ArrayList<SelectItem>();
SelectItem s1 = new SelectItem();
s1.setLabel(sourceDir + "_1");
SelectItem s2 = new SelectItem();
s2.setLabel(sourceDir + "_2");
SelectItem s3 = new SelectItem();
s3.setLabel(sourceDir + "_3");
SelectItem s4 = new SelectItem();
s4.setLabel(sourceDir + "_4");
dirs.add(s1);
dirs.add(s2);
dirs.add(s3);
dirs.add(s4);
When I run the above code, I notice that the first time, (and the only time), if I hit the "fetch" button the data in the drop-down menu does get refreshed.
Subsequently, it does not change. I am not sure what I am doing wrong.
Can someone help me?

Hi,
In order to use the JDBC persistence store you have to use a non XA JDBC driver for your Data Source.
http://docs.oracle.com/cd/E23943_01/web.1111/e13701/store.htm#CNFGD221
Point-13). When configuring a connection pool to use with WebLogic JMS JDBC Store, use non-XA database drivers.
http://middlewaremagic.com/weblogic/?p=586
Hope it helps

Data Targets does not show up despite having Active Update Rule

Hi mates,
I have an Info Cube of which I have created an Update Rule from a Active Info Source.
However, when I created the Info Package, the 'Data Targets' tab does NOT seem to show the Info Cube as part of the Data Target
Please advice

hello John;
check if this is a Basic cube or Transactional cube. If for some reasons this has been created as a transactional cube then you won't be able to see the cube on the InfoPackage because you theoritically you won't be loading data into the transactional cubes.
let us know the details.
Regards:
BK

Data Control does not show POJO returned from method

Hi,
I am running JDev 11.1.1.7. In my AppModule.impl I created a method that returns a simple POJO (which implements serializable) that has two String fields. I have exposed the method in the appmodule client interface. In the data control the method shows up with a return element instead of an object or any way to access the two String fields. I want to display the two String fields in separate output text components on my jspx page. I'm not finding documentation on how to do this. Can somebody point me to documentation or tell me how to make this change to the data control method return?
Thanks in advance,
Steve

AM method can return custom type, but AFAIK there is no support for object introspection in design time.
(so you can invoke this programmatically and cast to appropriate type, but you can't do DnD from Data Control pane).
So, option 1 is to bind value property of your outputText fields to managed bean, programmatically call AM method, fill these properties manually and refresh your UI components(note that managed bean must be registered in viewScope or higher to preserve values)
Option 2 is to create Bean DataControl (with this you will have DnD support)
Dario

4.0 EA1 - Data Modeler does not show columns data types correctly

Similar Messages

Maybe you are looking for