4.0 EA2 plsql editor gives syntax error on $$plsql_unit variable

Hello,
A plsql procedure contains the following statement in the declare section:
cl_module constant varchar2(20) := $$plsql_unit;
In the plsql editor the part $$ is indicated as having syntax errors, by hovering on it a popup window displays :
Syntax error, expected: name_wo_function_call, name, expr.
The procedure compiles without any problem. Please adapt the plsql parser to support $$variables.
Joop

Hello Jeff,
is this issue on the 4.0 EA3 list?
Joop

Similar Messages

Merged dimension gives #syntax error

Hi everybody,
i have a simple report that contains 2 query.
i merged two dimensions and everything looks like fine.
but when i just refresh the query it gives me syntax error;
bo system : 4.1 sp3 and both of queries are bex queries.any suggestion please.

Hi Veer,
1) same behaviour with Applet as well as web mode
2) No
3) I created a webi report, added two bex queries, Country Code is the common dimension which I'm trying to merge. Once both BEx queries are freshed and the objects from both queries are available in in the report to choose from, I try to merge them Country Code, however the merge option isn't even available (i.e. it does not allow merging by selecting objects or choosing the merge from the menu). As a work around I pull the Country code in the report pane from each query as a seprarate objects, ( i notice Country code object from Query one has the values while the Country Code from the second query has the #TOREFRESH, although both query were refreshed at start).
Since both Country Code objects are on the report cavas, I refresh both queries again. Now I see the values in both objects. Now if I select the Country code from the left hand panel it allows merging. After merging, I drag the new merage counry code on the report Cavas i see the combined values (so far so good). Next I refresh the report again and magically the merged objects is disappeared from the report canvas and the #SYNTAX erro is it remains there.
As I said, I am using 4.1 with Sup Pak 3, build 1257.
Any help would be appreciated.
Regards
WAK

N1SM 1.3.3 OS Load gives syntax error and drops into interactive install

Hi
I am trying to load Solaris 10 u4 onto a T1000 and a X4100.
This is my first installation of N1SM.
When I give the load command the T1000 will boot off the network, but after a while I very
briefly see a syntax error and a line about using US Keyboards, then the installation goes
into interactive mode rather than unattended.
This is very frustrating.
Does anyone have any ideas as to what could be going wrong?
I have installed N1SM on Solaris 10 U4 x86 and have the recommended patch bundle installed.
Thanks

No ... it will stay as IDR (Interim Diagnostic Relief - http://www.google.com/search?ie=UTF-8&oe=UTF-8&sourceid=navclient&gfns=1&q=IDR+site%3Asun.com ) afaik
If you want it, ask Sun for it ... official patch will not be released for it yet ... and I wouldn't count on official patch so soon ...
If you have a support for N1SM ... ask for the IDR , it's no. is IDR137229-01 (x86) & IDR137228-01 (sparc) , not sure about the linux one ...
hth
L

Trying to execute a stored procedure gives: Syntax error or access violatio

Hi,
I have a stored procedure that runs fine in sqplus:
EXEC load_image('distribuido.JPG', '1');
When i try to execute it in PHP it gives me this error:
[Oracle][ODBC]Syntax error or access violation.
In php i'm using ODBC functions, with the same user configured in dsn. The sql i run in php is 100% equal...
What's the problem and how should i run this procedure in php (or maybe grant more privileges to this user??)
The procedure is:
CREATE OR REPLACE PROCEDURE load_image( filename VARCHAR2, vid_membro INTEGER )
AS
file_lob BFILE;
binary_lob BLOB;
mime_type fotografia.foto_tipo%type;
extension_pos NUMBER;
BEGIN
extension_pos := INSTR( filename, '.' );
mime_type := 'image/' || SUBSTR( filename,
extension_pos + 1,
LENGTH( filename ) );
INSERT INTO fotografia (id_foto, id_cat, id_membro, nota_media, num_votos, foto_tipo, fotografia)
VALUES (fotografias_id.nextval, 1, vid_membro, 0, 0, mime_type, empty_blob())
RETURNING fotografia INTO binary_lob;
file_lob := BFILENAME( 'IMAGES', filename );
dbms_lob.fileOpen ( file_lob, dbms_lob.file_readOnly );
dbms_lob.loadFromFile( binary_lob,
file_lob,
dbms_lob.getLength( file_lob ) );
dbms_lob.fileClose ( file_lob );
END;
/

'exec' is an sqlplus directive. If you run this query in PHP, try:
$query = "BEGIN
load_image('distribuido.JPG', '1');
END;";
(you may have to remove the ; after 'END')

Syntax error when adding variables in recordset (query)

MySql,PHP,Dreamweaver,WindowsVista
Hi I am receiving a syntax error: invalid quantifier ++ $orderNum;s*?> when adding two variables in the recordset (query) dialog box. I get the error when clicking OK.
Here is what is entered:
name: fieldname
type: text
default: -1
runtime value: $_GET['Field']
name: searchvalue
type:text
default: -1
runtime value: $_GET['Search']
Can anyone help with this?

That's a completely separate issue. The error message is telling you that you have not defined the testing server correctly in the Site Definition dialog box.
The Host directory field and URL prefix should both point to the same place, in other words, the root of your website. Host directory is the physical path, while URL prefix is the address you would put in a browser address bar.
Select Site > Manage Sites. Select the name of the site, and click the Edit button. In the Site Definition dialog box, select the Advanced tab, and then choose Testing server from the Category list on the left.
Depending on how your remote login works, Host directory should probably be public_html or just /. Use the same value as in the Remote server part of the Site Definition dialog box. The URL prefix should be http://gaylehansen.aisites.com/.

(x86) Inline assembler syntax errors for 8bit variables

Hello,
I am porting some gcc code to Solaris and have some issues
with the inline assembler. It works reasonably well on most of
my code but with some instructions I have difficulties.
In gcc, when I declare a variable as char/unsigned char and
reference it within an asm-statement the assembler will generate
'half'-register names for it (e.g. %al, %cl, ...).
sunCC generates full registers for these variables and so
certain instructions fail to assemble.
e.g.
char flag;
asm ("setz %0" : "=q"(flag) : :);
Syntax error is given then for:
"setz %eax"
Is there a way to force the use of 8bit registers?
--L

Even worse:
char flag, char* ptr;
asm("xchgb %0, %1" : "=q"(flag),"=m"(*ptr):"0"(1), "m"(*ptr):);
produces
xchgb %edx,(%eax)
on sunCC even when no "-O" flag is given.
But
char flag, char* ptr;
flag = 1;
asm("xchgb %0, %1" : "=q"(flag),"=m"(*ptr):"0"(flag),"m"(*ptr):);
produces
xchgb %dl,(%eax)
on sunCC if no "-O" flag is given.
Strange behaviour indeed... :/
--L

Portlet editor's rich text editor gives javascript error 'access denied'

I created a header portlet using the Publisher's published content portlet template. When I try to edit the portlet content using the rich text editor in the portlet editor window, I get a javascript error in the status bar stating 'access denied'. I can't even type into the rich text editor window, it's totally disabled. Not that I see anything in there anyway. I'm logged in as admin. I've gone into the publisher explorer admin portlet and even 'published' the portlet's content, but to no avail. When I try to 'add header portlet' in my experience definition and try to use this portlet, nothing shows up, where the header portlet should be is just collapsed so my banner is just the top bar view bumped right on top of the nav view. (p.s. does anyone know how to take the alui doc's suggestion of 'disabling the topbar view and nav view' so that I can construct what I want entirely in a header portlet? Anyway, first things first, how do I get that access denied message to disappear in my header portlet's rich text editor and how the heck do I get it show up? Help.

There's probably not a developer in the forum that doesn't uncheck that box the moment they rebuild their machine/ennvironment. Changing the format of error messaging is hardly a fix for the error itself. Personally, I'm uploading 'file content items' now. I create the content in notepad and then upload > file content item. Then create a portlet that uses the pre-existing (was installed w/ publisher using their pte) 'published content item' web service. Go into the portlet's settings and associate the portlet w/ the content item you uploaded. Voila.
As far as using their rich text editor to create new content, I personally have no need anymore. However I'm sure our content managers will probably have to soon so I hope our latest installation will accommodate them w/o error, because I've never been aware of an actual fix to this problem.

Bash: "expr index string1 string2" gives "syntax error"

In a bash script, I was trying to use the command
expr index string1 string2
to find the position of string2 in string1, but this does not work on OS X while it works ok on several Linux machines. Reading the man page, I realized expr does something quite different on OS X than on Linux.
Can anybody suggest which command I should use to get the same functionality of the above on OS X?
Thanks
Andreas

Hi Ken,
   Wow! That's something you don't see every day; I'm really impressed. I had had a tough day too. Later I thought of a funny answer in which I blamed everything on the crazy shell I use. The difference between the two answers is just the flow of karma but stopping the flow of negative by saying something is a real and difficult choice and yours shows character. I'm sorry for going on too much but such things matter more than machines.
   On the other hand, you're a royal pain in the ... just kidding. You're a strict task master but right; I read in the man page about it returning zero and forgot. However, mathematically it isn't too difficult; you just have to use modular arithmetic. In zsh, (I can learn) it would look like:
test=aabbcc
echo $(( ( ${#test%%[bc]*} + 1 )%( ${#test} + 1 ) ))
In bash, it would look like:
test=aabbcc
testtmp=${test%%[bc]*}
echo $(( ( ${#testtmp} + 1 )%( ${#test} + 1 ) ))
Gary
~~~~
   In science it often happens that scientists say, 'You know that's a really good argument; my position is mistaken,' and then they actually change their minds and you never hear that old view from them again. They really do it. It doesn't happen as often as it should, because scientists are human and change is sometimes painful. But it happens every day. I cannot recall the last time something like that happened in politics or religion.
         -- Carl Sagan, 1987 CSICOP keynote address

Bug: syntax error in code editor breaks layout and redrawing windows incorrect

I'm working with "SQL Developer" version:
Oracle IDE    4.0.0.13.80
Plataforma Java(TM)    1.7.0_45
installed on windows 7 64 bits.
when I execute some ddl command in the code editor with syntax error, all layout windows are incorrectly drawn, and I have to close "SQL Developer" application to go on.
Example:
   COMMENT ON COLUMN "TABLE"."COLUMN1" IS 'comments on column 1';
   COMMENT ON COLUMN "TABLE"."COLUMN2" AS 'comments on column 2';
First comment is correctly aplied but second comment has a syntax error (AS is wrong) but you no receive error output, layout it hangs.
I tested with thick/OCI and using jdbc, and I always go to the same problem.

Good Morning
Did you ever get this working without restoring ?
Kind Regards
Marius

Getting Syntax Error in Script Editor

I am a fairly new Mac user and also fresh to programming. I am trying run a piece of code that I copied directly from a guide but seems to be giving me a syntax error: "Expected 'into', variable name, other parameter name or property but found end of line."
Here is the code that I am working with:
on gestaltVersioninfo(gestaltcode, string_length)
try
tell application "Finder" to ¬
copy my NumToHex((system attribute gestalt_code), ¬
string_length) to {a, b, c, d}
set the numeric_version to {a, b, c, d} as string
if a is "0" then set a to ""
set the version_string to (a & b & "." & c & "." & d) as string
return {numeric_version, version_string}
on error
return {"", "unknown"}
end try
end gestaltVersion_info
on NumToHex(hexData, stringLength)
set hexString to {}
repeat with i from stringLength to 1 by -1
set hexString to ((hexData mod 16) as string) & hexString
set hexData to hexData div 16
end repeat
return (hexString as string)
end NumToHex
copy my gestaltVersion_info("sysv", 4) to {system_version, system_string}
if the system_version is less than "1050" then
do shell script "/usr/bin/printf \"\\n# Block Adobe
Activation\\n127.0.0.1\\tactivate.adobe.com\\n127.0.0.1\\tpractivate.adobe.com\
\n127.0.0.1\\tereg.adobe.com\\n127.0.0.1\\tactivate.wip3.adobe.com\\n127.0.0.1\
\tactivate.wip4.adobe.com\\n127.0.0.1\\twip3.adobe.com\\n127.0.0.1\\twip4.adobe
.com\\n127.0.0.1\\t3dns-3.adobe.com\\n127.0.0.1\\t3dns-
4.adobe.com\\n127.0.0.1\\t3dns-2.adobe.com\\n127.0.0.1\\tadobedns.
adobe.com\\n127.0.0.1\\tadobe-dns-2.adobe.com\\n127.0.0.1\\tadobe-dns-
3.adobe.com\\n127.0.0.1\\tereg.wip3.adobe.com\\n127.0.0.1\\tactivatesea.
adobe.com\\n127.0.0.1\\twwis-dubc1-vip60.adobe.com\\n127.0.0.1\\tactivatesjc0.
adobe.com\\n127.0.0.1\\thl2rcv.adobe.com\\n\" >> /etc/hosts" with
administrator privileges
else if the system_version is greater than "1050" then
do shell script "/usr/bin/printf \"\\n# Block Adobe
Activation\\n127.0.0.1\\tactivate.adobe.com\\n127.0.0.1\\tpractivate.adobe.com\
\n127.0.0.1\\tereg.adobe.com\\n127.0.0.1\\tactivate.wip3.adobe.com\\n127.0.0.1\
\tactivate.wip4.adobe.com\\n127.0.0.1\\twip3.adobe.com\\n127.0.0.1\\twip4.adobe
.com\\n127.0.0.1\\t3dns-3.adobe.com\\n127.0.0.1\\t3dns-
4.adobe.com\\n127.0.0.1\\t3dns-2.adobe.com\\n127.0.0.1\\tadobedns.
adobe.com\\n127.0.0.1\\tadobe-dns-2.adobe.com\\n127.0.0.1\\tadobe-dns-
3.adobe.com\\n127.0.0.1\\tereg.wip3.adobe.com\\n127.0.0.1\\tactivatesea.
adobe.com\\n127.0.0.1\\twwis-dubc1-vip60.adobe.com\\n127.0.0.1\\tactivatesjc0.
adobe.com\\n127.0.0.1\\thl2rcv.adobe.com\\n\" >> /etc/hosts;
/usr/bin/dscacheutil -flushcache" with administrator privileges
end if

In your first *do shell script* statement, the *with administrator privileges* parameter is split across two lines. You just need to either put it on a single line or use option-return to continue a statement on the next line (not sure if the last *do shell script* has the same issue).
Note that there is an AppleScript forum where these kinds of questions will be seen by a more targeted audience.

Syntax error while running the Adobe Form

Hi to all,
I have created an interface for adobe from
Example: F4_HELP type ZST
Where ZST is structure type.
ZST structure has following field.
1) MATERIAL type MATNR
2) BASE_QTY type BASMN (BASMN of type QUAN, length 13 with ref table RC29K, and ref field BMEIN)
Interface and form successful activated.
But when I run adobe from it give syntax error for ref table RC29K, and ref field BMEIN
Field u201CRC29K- BMEIN u201Cis unknown. It is neither in one of the specified tables nor defined by a "DATA" statement.
Please can anyone tell me the solution for that?
I shall be thankful to you for this.
Regards
Pavneet Rana

Thanks For reply
I have already maintained the ref table and field for field BASE_QTY type BASMN
Ref table RC29K, and ref field BMEIN.
But still error is coming.
please can any one tell me the solution for that.
i shall be thankful to you for this.
Regards
Pavneet Rana

What is this syntax error?

The standard SAP program SAPDBZDF giving error in ECC6.0 version in line 211:Field "%_GET" is unknown. It is neither in one of the specified tables nor defined by a "DATA" statement . . .
The line declared is
IF B0SG-XASGL <> 'X' AND %_GET+10(1) <> ' '.
What is the %_GET? how to eliminate the error?
This code doesn't give syntax error in 4.0B version.
If it is standard SAP report, please help me.

Hi,
this rather looks like some kind of inactive query, infostructure or other generated stuff.
As already mentioned: Our system knows
SAPDBDDF                                   Logical Database SAPDBDDF
SAPDBIDF                                   Real Estate Logical Database
SAPDBKDF                                   Logical Database SAPDBKDF
SAPDBMDF                                   FM Master Data Mass Selection
SAPDBSDF                                   SAPDBSDF Logical Database
SAPDBVDF
If you copied one of the standard logical databases to customer name space SAPDBZDF: I did this and I found OSS notes guiding through additional necessary process.
Regards,
Clemens

Syntax error in programme

Please check this programme this gives syntax error...
*& Report YTEST12                                                     *
REPORT YTEST12                                 .
tables:mara.
data: begin of itab occurs 10,
      matnr like mara-matnr,
      mbrsh like mara-mbrsh,
      mtart like mara-mtart,
      meins like mara-meins,
      end of itab.
DATA: ITAB1 like itab occurs 10 with header line.
DATA gt_fieldcat TYPE lvc_t_fcat WITH HEADER LINE.
data: ok-code like sy-ucomm.
DATA gs_layout TYPE lvc_s_layo.
DATA: go_grid             TYPE REF TO cl_gui_alv_grid,
     go_custom_container TYPE REF TO cl_gui_custom_container.
start-of-selection.
CALL screen 100.
*&      Module STATUS_0100 OUTPUT
      text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
CREATE OBJECT go_custom_container
         EXPORTING container_name = 'ALV_CONTAINER'.
       CREATE OBJECT go_grid
         EXPORTING
           i_parent = go_custom_container.
PERFORM prepare_field_catalog CHANGING gt_fieldcat[].
PERFORM LAYOUT.
perform load_data.
ENDMODULE.                 " STATUS_0100 OUTPUT
*&      Form load_data
      text
--> p1        text
<-- p2        text
FORM load_data .
select matnr mbrsh mtart meins from mara into table itab1.
CALL METHOD go_grid->set_table_for_first_display
IMPORTING
*container_name = 'ALV_CONTAINER'.
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT =
I_SAVE =
I_DEFAULT = 'X'
is_layout = gs_layout.
IS_PRINT =
IT_SPECIAL_GROUPS =
*it_toolbar_excluding = pt_exclude "excluding toolbar functions
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
IR_SALV_ADAPTER =
CHANGING
it_outtab = itab1[]
it_fieldcatalog = gt_fieldcat[]
IT_SORT =
IT_FILTER =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " load_data
*&      Form prepare_field_catalog
      text
     <--P_GT_FIELDCAT[] text
FORM prepare_field_catalog CHANGING gt_fieldcat TYPE lvc_t_fcat.
DATA ls_fieldcat TYPE lvc_s_fcat.
ls_fieldcat-tabname = 'ITAB1'.
ls_fieldcat-fieldname = 'MATNR'.
ls_fieldcat-scrtext_m = 'MATERIAL'.
ls_fieldcat-col_pos = 1.
ls_fieldcat-outputlen = 10.
ls_fieldcat-emphasize = 'C400'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO gt_fieldcat.
ls_fieldcat-tabname = 'ITAB1'.
ls_fieldcat-col_pos = 2.
ls_fieldcat-fieldname = 'MBRSH'.
ls_fieldcat-scrtext_m = 'INDUSTRY'.
ls_fieldcat-emphasize = 'C900'.
APPEND ls_fieldcat TO gt_fieldcat.
ls_fieldcat-tabname = 'ITAB1'.
ls_fieldcat-col_pos = 3.
ls_fieldcat-fieldname = 'MTART'.
ls_fieldcat-scrtext_m = 'TYPE'.
APPEND ls_fieldcat TO gt_fieldcat.
ls_fieldcat-tabname = 'ITAB1'.
ls_fieldcat-col_pos = 4.
ls_fieldcat-fieldname = 'MEINS'.
ls_fieldcat-scrtext_m = 'UNIT'.
APPEND ls_fieldcat TO gt_fieldcat.
ENDFORM.                    " prepare_field_catalog
*&      Module USER_COMMAND_0100 INPUT
      text
MODULE USER_COMMAND_0100 INPUT.
CASE sy-ucomm.
       WHEN 'EXIT'.
         LEAVE TO SCREEN 0.
     ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
*&      Form LAYOUT
      text
--> p1        text
<-- p2        text
FORM LAYOUT .
gs_layout-stylefname = 'FIELD_STYLE'.
gs_layout-zebra = 'X'.
gs_layout-grid_title = 'MATERIAL'.
gs_layout-sel_mode = 'A'.
gs_layout-ctab_fname = 'COLORS'.
ENDFORM.                    " LAYOUT

recode like this..Reward if useful..please find the code i have changed(in bold)
REPORT YTEST12 .
tables:mara.
data: begin of itab occurs 10,
matnr like mara-matnr,
mbrsh like mara-mbrsh,
mtart like mara-mtart,
meins like mara-meins,
end of itab.
DATA: ITAB1 like itab occurs 10 with header line.
DATA gt_fieldcat TYPE lvc_t_fcat WITH HEADER LINE.
data: ok-code like sy-ucomm.
DATA gs_layout TYPE lvc_s_layo.
DATA: go_grid TYPE REF TO cl_gui_alv_grid,
go_custom_container TYPE REF TO cl_gui_custom_container.
start-of-selection.
CALL screen 100.
*& Module STATUS_0100 OUTPUT
text
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'xxxxxxxx'.
SET TITLEBAR 'xxx'.
CREATE OBJECT go_custom_container
EXPORTING container_name = 'ALV_CONTAINER'.
CREATE OBJECT go_grid
EXPORTING
i_parent = go_custom_container.
PERFORM prepare_field_catalog CHANGING gt_fieldcat[].
PERFORM LAYOUT.
perform load_data.
ENDMODULE. " STATUS_0100 OUTPUT
*& Form load_data
text
--> p1 text
<-- p2 text
FORM load_data .
select matnr mbrsh mtart meins from mara into table itab1.
<b>
CALL METHOD go_grid->set_table_for_first_display
EXPORTING
*container_name = 'ALV_CONTAINER'.
I_BUFFER_ACTIVE =
I_BYPASSING_BUFFER =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
IS_VARIANT =
I_SAVE =
I_DEFAULT = 'X'
is_layout = gs_layout
IS_PRINT =
IT_SPECIAL_GROUPS =
*it_toolbar_excluding = pt_exclude "excluding toolbar functions
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
IR_SALV_ADAPTER =
CHANGING
it_outtab = itab1[]
it_fieldcatalog = gt_fieldcat[]
IT_SORT =
IT_FILTER =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4
</b>IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " load_data
*& Form prepare_field_catalog
text
<--P_GT_FIELDCAT[] text
FORM prepare_field_catalog CHANGING gt_fieldcat TYPE lvc_t_fcat.
DATA ls_fieldcat TYPE lvc_s_fcat.
ls_fieldcat-tabname = 'ITAB1'.
ls_fieldcat-fieldname = 'MATNR'.
ls_fieldcat-scrtext_m = 'MATERIAL'.
ls_fieldcat-col_pos = 1.
ls_fieldcat-outputlen = 10.
ls_fieldcat-emphasize = 'C400'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO gt_fieldcat.
ls_fieldcat-tabname = 'ITAB1'.
ls_fieldcat-col_pos = 2.
ls_fieldcat-fieldname = 'MBRSH'.
ls_fieldcat-scrtext_m = 'INDUSTRY'.
ls_fieldcat-emphasize = 'C900'.
APPEND ls_fieldcat TO gt_fieldcat.
ls_fieldcat-tabname = 'ITAB1'.
ls_fieldcat-col_pos = 3.
ls_fieldcat-fieldname = 'MTART'.
ls_fieldcat-scrtext_m = 'TYPE'.
APPEND ls_fieldcat TO gt_fieldcat.
ls_fieldcat-tabname = 'ITAB1'.
ls_fieldcat-col_pos = 4.
ls_fieldcat-fieldname = 'MEINS'.
ls_fieldcat-scrtext_m = 'UNIT'.
APPEND ls_fieldcat TO gt_fieldcat.
ENDFORM. " prepare_field_catalog
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
CASE sy-ucomm.
WHEN 'EXIT'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form LAYOUT
text
--> p1 text
<-- p2 text
FORM LAYOUT .
gs_layout-stylefname = 'FIELD_STYLE'.
gs_layout-zebra = 'X'.
gs_layout-grid_title = 'MATERIAL'.
gs_layout-sel_mode = 'A'.
gs_layout-ctab_fname = 'COLORS'.
ENDFORM. " LAYOUT
Message was edited by:
        Arjun Puthuruthy
Message was edited by:
        Arjun Puthuruthy

Forte syntax error...

Hi,
I got a syntax error from Forte (3.0.M.2) for the next assignments
however they are working if the declaration and assignment is
written separately.
locTD : TaskDesc = start task self.Run() where completion = event;
gives "syntax error (Last symbol: start)" but
locTD : TaskDesc;
locTD = start task self.Run() where completion = event;
works fine
The same is true for eventhandler registration:
locER : EventRegistration = register self.TestEH();
results in "syntax error (Last symbol: register)" while
locER : EventRegistration;
locER = register self.TestEH();
is OK
Any idea for the reason behind???
Thanks
Attila
Attila Racz FORTECH IT Ltd.
http://www.fortech.hu
E-mail: [email protected] .-``'.
[email protected] .` .'
Tel.: +36/1-471-9150 _.-' '._ Hermina ut 17.
Fax : +36/1-471-9163 H-1146 Budapest, Hungary
--------------------------------------------------------------------------

Hello Forte-Users,
i got only one reply on my problem, so i will explain the problem more
clearly.
in the include File: FORTE_ROOT/install/os/os.h
is a definition: '#define qqOS_HUGE'
The compiler fails in File: FORTE_ROOT/install/cmn/osmm.h line 4
in the Class Definition: 'class qqOS_HUGE qqsh_Task;'
with the following error:
FORTE_ROOT/install/inc/cmn/osmm.h", line 4.1: 1506-166 (S) Definition of
function class requires parentheses.
Does anyone know which option or failure in the environment of the
C-Compiler occures this error?
Works someone on a RS6000 with an AIX C-Compiler on AIX 4.2?
So please look at your configuration settings and help me.
I know that a function needs parentheses, but this code (everybody have the
same Header-Files on his/her machine) wants to define a class and no
parentheses are needed for class definition.
Joseph Mirwald
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

(NOLOCK) is giving syntax error

Hi,
I have query which runs properly in 1 server and in the other server it gives syntax error because of (NOLOCK).
When i remove (NOLOCK) its working fine.
my query is a big one...
But it is something like
INSERT INTO @abc
SELECT a.id,SUM(b.count) FROM
(SELECT DISTINCT id FROM table1 (NOLOCK)) AS a
INNER JOIN Table2 (NOLOCK) AS b
GROUP BY a.id
It is giving syntax error at only one (NOLOCK) that is near Table2 in one server and in other server it works fine...
Both the server versions are exactly same...
What is the reason?

First, it is generally a bad idea to post a follow-up "me, too" response to an old and answered question. Fewer people will look at an answered question generally.
Next, the reason this thread provides no information about the original problem and the solution is because the complete problem was not posted. If your query generates an error message, it is important to see the complete and actual error message.
Given the conversation, it is likely that there was a syntax error in the various statements that OP tried and it was a happy accident that the removal of the hint caused the error to go away.
Lastly one should refrain from using hints generally. For some unfathomable reason there is a myth that it is a good practice to use the nolock hint.

4.0 EA2 plsql editor gives syntax error on $$plsql_unit variable

Similar Messages

Maybe you are looking for