4.0 layout files cant be read by 4.1 and vice versa?!?

I have just learned that all my videoTs folders that I have built in studio pro 4.0 cannot be formated in DVDSP 4.1 and vice versa. This is extremely frustrating and has limited the efficiency having both a G5 workstation and a Xeon workstation should yield.
Any one know why this is?
-ryan

and below is the detailed dbx version:
[test]:dbx -V
Sun Dbx Debugger 7.6 SunOS_i386 Patch 124873-01 2007/07/12
For information about new features see `help changes'
To remove this message, put `dbxenv suppress_startup_message 7.6' in your .dbxrc
below is the detailed sun OS version:
SunOS Generic_118844-26 i86pc i386 i86pc Solaris
and here is the detailed architecture information:
$ isainfo -v
64-bit amd64 applications
pause sse2 sse fxsr amd_3dnowx amd_3dnow amd_mmx mmx cmov amd_sysc cx8
tsc fpu
32-bit i386 applications
pause sse2 sse fxsr amd_3dnowx amd_3dnow amd_mmx mmx cmov amd_sysc cx8
tsc fpu

Similar Messages

Mac OS 10 can't see files on HD coming from OS 9 and vice versa?

Hello, all! Got a TiBook 1Ghz with a 255 GB HD which I've partitioned in half, one for Tiger/OS 9 and one for Leopard. Problem: Any file placed on Vol 2 in OSX is invisible in OS 9 and vice versa, so one writes over the other. Vol 1 works fine. Tried reformatting, disk repair, DiskWarrior 9 and 10, re-installing all the operating systems. Suggestions? Thanks!

Hi, kennethfromtoronto & BGreg! I do know that OS 9 is not supported by Leopard, however I'm not talking about running 9 in Classic. This TiBook will run 9 by itself, but when I run OS 9 it is from Volume 1 which also has Tiger installed. I can boot from Tiger or from OS 9 from Volume 1 and they both run just fine.
The problem is that when do I boot from OS 9, it can't see the files on Volume 2 that were placed there under OS X Tiger. Conversely, when I run Tiger, the files I put on Vol 2 while running OS 9 are not visible. It's like I'm running a parallel universe. Unfortunately, this allows one system to overwrite whatever was put on the volume from the other system, and vice versa, with the net effect that I don't dare run OS 9 for fear of overwriting data on Volume 2.
Also when I do run Leopard from the second volume, it also cannot see any files on Volume 2 that were put there under OS 9.
Note that with Volume 1 there is no visibility problem, no matter which of the three systems is running. It happens with the second volume, whether it has an operating system installed on it or not.
Usually I am good at figuring this stuff out, but you see how confusing this is... My thinking is there might be a bug in the Apple formatting software? I used the Disk Utility from my external hard drive which runs Leopard.
Makes a good puzzle to solve, anyway... Thanks for the help!
DQM

Why is it so hard to drag & drop files from a PC to a Mac and vice-versa?

I realize we have two totally different operating systems, but it seems that you can get so close to sharing files and then there's a blockade. I have a iMac 24 and I love it. I also love Cored Draw, have been using it for 15 years and I still don't have the courage to install my purchased copy of Parallels!!! So I create vector graphics on my PC, then export as a GIF or PDF. I can use those files on my pc, but for some strange reason... in the folder where I'm storing them (and they show up on the PC) only the original *.cdr Corel files are showing up... none of the GIF files or JPG or PDF files show up. And like I said, they are there, I can see them in the explorer window on the pc.
This is crazy... I need to be able to easily shuffle files back and forth. Obviously running OSX latest version on the Mac, running Vista Home Premium on the PC. PC shows up in finder, as does the folder... just those image files that don't. Is there a simple explanation? TIA

What I meant (and didn't explain well enough) was you should try to put your .jpgs in a different/separate folder, e.g. copy/duplicate/export or whatever you need to do on a Windows machine to get a separate copy in a separate location. You could test it by sending yourself an email attachment and/or copy it to a thumb drive, other external, or a CD. If you can open/read any of those on the Mac, then I'd say the problem is on the Windows side. I have to help my elderly neighbor occasionally with his Windows machine and encountered a similar problem: a .jpg he wanted me to copy to a thumb drive would not cooperate.
+Is it possible that a Mac cannot see/read files created under Vista+
AFAIK, .jpgs and .pdfs are a "universal" format; I email either/both to/from friends using Windows and we've never had a problem. I'm not sure about .cdr since that is a proprietary format and may only work with the app version it was created in.

Originating File Sharing Mini with Leopard G3 Beige and Vice Verse.

I guess a sub-heading of this would be connecting to the newest Mac from an older one.
Here is a problem: I can set up the G3 Beige (running Jaguar) as a file sharing server and very easily connect to it from the a Mac Mini by using top menu Go>Connect to server.
Where i run into what seems to be impossible is to do the same thing from the G3. Nothing seems to establish a connection. It is always rejected with a no connection error message.
Both machines are wirelessly connecting through a router. The mini with internal airport and the G3 beige using an external D-link bridge. Both work fine accessing the internet.
Main reason i wanted to do this is that my Shared Printer is on the Mini and i wanted to print something from the Beige to it.
Can anybody help, or am i attempting the impossible.

DEAR Grant Bennet-Adler: Thank you for your last reply. I'm not sure exactly what i did but I was able to connect. To answer your questions:
IP Addresses are similar. One is ...101 and the other is ...102.
My router uses DHCP.
What seemed to fix the problem was going to security>firewall on the MINI and checking
o Allow all incoming messages.
Not sure what ODS Agent.app is but it is highlighted as allow incoming vs blocked.
Both computers "allow personal file sharing"
On the G3 i was able to connect after a bit of trial and error: On the G3, when i "Connect to Server" i am presented with three choices of servers, one of which is the G3 itself--I wish the system wouldn't remember irrelevance.
One of the choices is OK and when i checkit i get the ID and Password Dialog--again for ID i am presented with the MINI's name and not my user (Admin) name.
Change that, type in the password and i am given a list of drives on the folder. That includes any opened from a .img.
After i open one i then see it on my desktop and can get into it.
One slight problem: Once into one, i can;t go back to "go to server" to open more. I get timeouts, error messages and other stuff. I have to start over. That also appears to be to include disconnecting the connection to the G3 server that gets set up on the MINI.
Regards:
p.s I hven't gotten into Shared Printer although i saw it did show up in the Firewall dialog.I think i have the Canon MP470 Software on the G3 as well as the Mini but i will have to check on it.
p.p.s. Next thing is to try X PostFacto on the G3 again to try to install a later OS; but this time not making the mistakes that totally messed it up the last time, last year, that i tried it.

Garageband Files on Logic Express and vice versa

My daughter uses Logic Express at school (sorry, I don't know which version). She has been trying to do her homework on our eMac (OS 10.3.9) using Garageband 1 and her M-Audio midi/usb keyboard via USB.
Her teacher says that Garageband files should work fine with Logic Express and vice versa.
The problem is they don't. We have tried importing files, also saving in one programme and opening in the other - all to no avail.
Presumably we are doing something wrong somewhere. Does anyone know how to get Logic Express to use Garageband 1 files and vice versa, please?
One more point of information, she saves the files to a 'PikaOne Slim Flycase' 40gb Portable HD to take to school to use on an Apple Laptop type computer (Powerbook?). Both home and school machines appear to be working perfectly with this device.
She also has some software called 'Logic Hit Kit' but I don't think this is has anything to do with Logic Express. It's files do not work with Logic Express either
PM6500/300 (603e) Mac OS 9.1.x

That is correct, and you still have your level
status, it just doesn't show. I read in The Lounge
(for level 4 & 5) that they were planning to return
the level status and custom icons to the forum. But
it has been a long time now, and they haven't. I miss
my custom icon
Yes, apparently they intend to at some point. But, they have more pressing things to attend to first, so it might be a while. I have discovered that there's a special forum about this.

How to read two text files using the Read from spreadsheet.vi and then plot it

I need to read two text files using the read from spreadsheet function and then plot these files over time.
The file with the .res extention is the RMS values (dt and df) and the second file contains the amplitude of a frequency spectrum.
I really appreciate any help..thanks
Attachments:
RMS.txt ‏1 KB
FREQUENCY.txt ‏1 KB

From NI Example Finder:
Write to Text File.vi
Read from Text File.vi
Jean-Marc
LV2009 and LV2013
Free PDF Report with iTextSharp

Navigate from WebDynpro Application to BPS Layout and vice versa

Hi,
Please see the following Problem Statement:
We have WebDynpro applications and BPS applications in our project. All the applications are published via SAP Portal. Both areas (WebDynpro and BPS) have same selection screen (Selection fields are common). Is it possible to call
WebDynpro application from BPS layout (on click of button)and also passing the selection parameters to the WebDynpro application and vice-versa.
- Sujal Shah

Hi,
You can you free tool from Oracle called OMWB (Oracle Migration Workbench) for SQL Server to Oracle.
For more details, visit http://www.oracle.com/technology//tech/migration/workbench/index.html
From Oracle to SQL Server, there are third party tools available.
Cheers,
Harshw
Message was edited by:
[email protected]

Im new to Mac and wanted to know what is the easiest way to transfer files from a mac computer and mac extenal hardrive to windowns and vice versa?

Im new to Mac and wanted to know what is the easiest way to transfer files from a mac computer and mac extenal hardrive to windowns and vice versa?

For small amount of files, a regular USB stick or drive, it's already formatted with a MBR and FAT32 most likely which works both on PC's and Mac's.
External drives if you need more space.
However FAT (or Fat32 or MSDOS) has a 4GB file size limit. So if your transfering files bigger than that then you need to format it exFAT on the Windows machine.
Vista and Win 7 can do this, Windows XP one can download a free exFAT upgrade from Microsoft.
Mac's can read/write the MBR and FAT/exFAT (10.6.5 and later) formats, it's best to format it on the Windows machine, even though the Mac can format it too, it's better to do it on Windows then take it to the Mac to confirm.
Rack your brain here on it.
https://discussions.apple.com/message/16317478#16317478

Hi,Can a WAR file be deployed as EAR file and vice versa.

Hi,Can a WAR file be deployed as EAR file and vice versa.If so what are the changes we need to do.

hi tel me in detail why u want 2 do that
why u want to cnvert a web arch into enterp arch

Read e-mail in Mail appears as unread on iPhone, and vice versa, with IMAP

My Mail accounts are configured using IMAP. When I read an e-mail on my iMac or PowerBook, it appears as read on my iPhone. And vice versa.
Yesterday I changed my e-mail passwords with my website host. I updated my passwords in Mail and my iPhone too. While I'm able to receive and send messages from both computers and my iPhone, now when I read an e-mail on one device, it does not appear as read on the others.
Any idea how to fix this problem?
Thanks!

I just noticed that moving an e-mail from one folder to another on one device will be reflected on another one (although the message still won't be marked as read).

When I read my messages on my iPad it isn't recognised by mail on my iPhone and vice-versa, why not?

When I read my messages on my iPad it isn't recognised by mail on my iPhone and vice-versa, why not?

Your messages may be synced with your email server, but whether you have read it or not is device-dependent. That information is not synced.

M2T files cant be read with AA CS6 (Mac)

Hi, I gave osmeone some M2T files. Some were from a Z7 and some from a Datavideo DN 60 recorder (which was connected to a Z1). The person I gave them to said he could not read them in After Effects CS6 on Mac. Anyone got any ideas how I has resolve this.
Ben

Maybe you can rename the extension, but I wouldn't. Working in AE is all about preserving image quality, and mpeg files are lossy. I'd transcode to a better codec first.

I am having problems with Olympus .orf files one files cannot be read by Elements 10 and Lightroom 4. Both provide an error message saying that the file is not recognized. Any ideas? minzen

i am having problems with Olympus .orf which cannot be read by Elements 10 and Lightroom 4. Both provide an error message saying that the file is not recognized. Any ideas? minzen

That camera model is too new for your programs. Every camera has its own raw format and ACR must be updated to include the info for each new model as it comes out. The workaround would be to download the free Adobe DNG converter and use that to convert your ORFs to DNGs that your version of Camera Raw can read.

Safari 5.1.1 Reading list is not syncing to my iPad and vice versa.

Running Lion 10.7.2, iOS5 on iPad, Safari 5.1.1, iCloud all setup propertly, everything is working except Reading list, it will not sync to the iPad or vice versa?
Any ideas? Are Apple servers just being overloaded?

Okay, it appears to be working now...
I went through the tips described here: http://support.apple.com/kb/TS4001?viewlocale=en_US
What seems to have helped is "Turn iCloud Bookmarks off and back on"
I did that before, but without step 4: "Close System Preferences and wait about a minute."
Did that now, and it synchronized with the iOS devices.

NEF Files Cant Be Read

updated to lightroom 3.5 wont read my NEF files. PLEASE HELP i have been at this for hours. How to I Import my photos from my D300?

So as soon as you updated to LR3.5 it quit working but used to work with LR3.4 or has something else also changed like an OS upgrade or new user profile?
It may be that LR 3.5 is using a different OS function to read from the camera which isn’t compatible, anymore, or something else may be coincidentally be going on.
Can you copy the files from the camera to your hard drive, successfully using Finder or Explorer, depending on your OS?
If you can copy files to your hard-drive and import from there and they work ok, then it may be either a cable issue or some OS-level-interface change in LR.
Do you have a card-reader to see if that works?
Does the camera have any USB-mode like PTP and Mass Storage where only one does what you want for copying RAW files?

4.0 layout files cant be read by 4.1 and vice versa?!?

Similar Messages

Maybe you are looking for