4.01 session restor doesn't work
Session restore is not working.
I did remove sessionrestore.jp's in my profile. It worked once but on following boot no restore happened
HI and Welcome to Apple Discussions...
Go to the Safari Menu Bar, click Safari/Preferences. Make note of all the preferences under each tab. Quit Safari. Now go to ~/Library/Preferences and move this file com.apple.safari.plist to the Desktop.
Relaunch Safari and see if that makes a difference. If not, move the .plist file back to the Preferences folder. If Safari functions as it should, move that .plist file to the Trash.
Carolyn
Similar Messages
-
Hi, been using Firefox for some years, had to replace hard drive recently and re loaded Firefox. Since then, the restore previous session button doesn't work, but I can do it from the History tab. Also Firefox itself won't start from the task bar or desktop, only the start menu.
Using Windows XPThis function may not be available for mobile yet. You can put your suggestions to the [[Suggestion Box]]. Thanks!
-
HT1560 What if Factory Restore doesn't work?
What if Factory Restore doesn't work?
As a last ditch effort, try the following:
Power off the AirPort for a few minutes
Hold in the reset button first, and keep holding it in for another 10-12 seconds while you simultaneously plug the power back into the AirPort
Release the reset button after the hold period, and allow a full minute for the AirPort to restart
At this point, the amber should be blinking slowly, and you should be able to reconfigure it again using AirPort Utility on your Mac
If a factory default reset does not work, the AirPort is defective and will need to be replaced. -
Hi, I wanted to up upgrade my iPhone 4 from ios 4.1 to ios 5.1.1 and now i'm stuck in recovery mode and the restore doesn't work
I tried to restore with ios 5.1.1, with ios 5.0.1 and with ios 4.1
none is workingMcloulou34 wrote:
Oh my god, it finally worked ! I restored on an old PC and it worked !
Thanks anyway for your help.
But allow me to extend to you a simple reflexion about the jailbreak (even if my iPhone wasn't... except if my little cousin jailbreaked without me noticing the advantages or disadvantages) : Would you refuse an alcoholic trying to go to rehab ? Would you really let someone trying to restore a cellular phone die without it, because he went on the bad side a couple of years ?
Not a great analogy, but this is a user-to-user forum, and Apple will not allow discussion of jailbreaking; if someone tried to help with jailbreaking the message would be deleted. However, if you have a jailbroken phone Apple will generally not block a discussion of how to unjailbreak it. The only problem is that not all jailbroken phones can be restored successfully; it depends on the method of jailbreaking (which I can't discuss without THIS message being deleted). -
if the phone we are updating is locked how can we 6.1 to 5.0 and what if restoring doesn't work at all...
iTunes will only ever install the latest version of iOS for the device, in the case of the 3GS that is 6.1.
-
Ipod not recognized and Restore doesn't work
i have an ipod classic 160 GB, with disk mode enabled. When i connect it to the mac mini, it calls up iTunes. but then the message comes up that ipod can't be recognized. So i have restored it (using the latest updates, by connecting to the net) and then synced. During ejecting the ipod too, the proper procedure has been followed. However, at the end of all of it (i have 10000+ items in iTunes and it takes a LOOONG time to sync), when i try to use the disconnected ipod, it shows 'No Music', 'No Playlists', no this, no that...
I have also gone thru some other posts in this forum which suggested methods (such as getting ipod into disk mode and then connecting, trashing ipod software updates and reinstalling), to try to rectify the problem but there has been no difference And BTW, now i check, ipod shows 92 GB free (of the 160 GB). so what been copied, and where is it? or is the flash drive corrupted?
Pls HELP, as I need the ipod and my music
BTW, I think that this problem has become more pronounced since I installed the latest iTunes update (7.6.1)Try this...
*Checking hard-drive for errors*
Hold Menu+Select on the iPod for about 6 seconds until it resets, then hold Menu+Play as soon as the Apple logo appears, again for about 6 seconds to put the machine in disk mode. Connect to your computer, closing iTunes if it opens. Run *Disk Utility / Repair Disk* for the iPod. This should find and correct any errors in the logical & physical structures of your iPod's hard drive. Once these have been fixed you can reset the iPod (hold Menu+Select ) and should stand a better chance of a successful restore.
Once you've restored your iPod don't rush to dump all the data back exactly as it was before. Complex smart playlists can sometimes trigger constant reboots or dumping of the iPod's library. In addition, larger transfers can fail leaving data in an inconsistent state. Try this technique for populating the iPod in stages.
*Break up large transfers*
In iTunes select the menu item *File... New Smart Playlist*. Change the first drop-down box to Playlist, the next to is and the next to Music. Tick against *Limit to*, type in say 10, then change the drop-down to GB, and set the last drop-down to artist. When you click OK you can enter a name for the playlist, e.g. Transfer. Now sync this playlist to your iPod rather than your entire library. When the sync is complete modify the rule ( *File... Edit playlist* ) to increase the size by your chosen amount, then sync and repeat. You can experiment with different size increments, if it doesn't work just choose something a bit smaller until it works each time. Before long you should have all your music on your iPod. Once that's done you can move on to other media such as podcasts, videos, photos etc.
tt2 -
I don't like Firefox 7, how do I revert to the previous version? System restore doesn't work.
With Firefox 7 my computer is slower to boot up and shut down. When typing the website I want in the address bar the old firefox took me straight to the site now it takes me to Google. I'd like to revert to the previous version of Firefox. I have tried using system restore but it doesn't work. I'm using windows XP. Can anyone help?
Starting with the release of Firefox 7, the previous versions of Firefox (4.0.x, 5.0.x and 6.0.x) are no longer maintained with Security and Stability updates. Firefox 3.6 is the last previous Firefox version that is still being maintained.
Firefox versions 4.0.x 5.0.x 6.0.x contain Security vulnerabilities that are known and could be exploited by some websites to gain unauthorized access to information or to disrupt critical processing. Only the Latest version 7.0.1 and an Older version 3.6.23 of Firefox are secure against these known vulnerabilities.
* http://en.wikipedia.org/wiki/Vulnerability_%28computing%29#Vulnerability_consequences
* http://www.mozilla.org/security/known-vulnerabilities/firefox.html#firefox6
Threats safeguarded in Firefox 7:
*http://www.mozilla.org/security/known.../firefox.html#firefox7
'''Slowness Issues'''
-> Clear Cookies & Cache
* https://support.mozilla.com/en-US/kb/Template:clearCookiesCache
-> [[How to clear the cache#w_clear-the-cache|Clear the Network Cache]]
-> [[Troubleshooting extensions and themes]]
'''Redirection Problems'''
-> [[Searches are redirected to another site]]
-> '''Is my Firefox problem a result of MALWARE ??'''
* Popups Not Blocked - http://kb.mozillazine.org/Popups_not_blocked
-> Do a MALWARE check with these Malware Scanning programs. You need to scan with all programs because each program detects different malware. Make sure that you UPDATE each program to get the latest version of their Databases before doing a Scan. Also, Close All other Applications (softwares) before Starting to Run Scans.
* Malwarebytes' Anti-Malware - http://www.malwarebytes.org/mbam.php
* SuperAntispyware - http://www.superantispyware.com/
* Windows Defender Home Page - http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
* Spybot Search & Destroy - http://www.safer-networking.org/en/index.html
* Ad-Aware Free Internet Security - http://www.lavasoft.com/products/ad_aware_free.php
Check and tell if its working. -
HELP SESSION RESTORE WILL NOT WORK
please can some one help me i am trying to copy session restore file from a previous back up - but it will not work - please help - thnx
Could you describe what you have tried?
To make sure you are copying the old sessionstore.js file to your currently active Firefox profile folder, you can open that folder from inside Firefox as follows (either):
* "3-bar" menu button > "?" button > Troubleshooting Information
* Help menu > Troubleshooting Information
* type or paste about:support in the address bar and press Enter
In the first table on the page, click the "Show Folder" button
Please note that before touching the existing sessionstore.js file, you should exit Firefox and allow time for it to close files. Either:
* "3-bar" menu button > "power" button
* File menu > Exit
Then rename it to sessionstore.old before copying in the file you want to use.
Note: if Windows does not show .js extensions on file, please see the steps in this article to show them so you can work with files as accurately as possible: http://support.microsoft.com/kb/865219 -
System Restore is not working!!! Both my mac laptop and now my Windows 7 desktop will not allow me to restore previous sessions.
Try to use the "Restore Previous Session" entry in the History menu instead.
See also:
*[[/questions/892970#answer-271366]] -
N73: restore doesn't work after firmware update
Hello!
I just made a firmware update to my N73 with NSU, and the procedure completed with no errors.
Just before the update I made a backup with the application in the phone menu; the app wrote a backup.arc file in the MMC.
After the update I tried to restore the backup via the same app.
Here's the problem: the app seems to work (but the "restore" lasts just 1-2 seconds), the phone reboots, but nothing is restored.
Googleing aroung I found a solution: buy the Noki 1.7 software, extract SMS, contacts and files from the backup.arc, and put everything back on the phone...
Is there another solution that doesn't involve buying this 3rd party software?
TIAThe phone is working well...
I have been searching in internet, and there'a a lot of people with the same problem. Everybody tells to use PC Suite to backup... if I only knew before. -
Restoring my iPod Video doesn't seem to work as every time I restore it, it only continues to ask me to restore over and over again to no avail. I'm not sure if there is something wrong with the iPod itself that needs service or if there's been a small step in Apple's support that I've overlooked.
(All my iPod and iTunes software is up to date and I've just recently restarted my computer and updated/reinstalled my USB devices){quote:title=GenericUsernameHere wrote:}{quote}
Restoring my iPod Video doesn't seem to work as every time I restore it, it only continues to ask me to restore over and over again to no avail.
Hi GenericUsername,
It sounds like you might be having a issue of drive letter confusion here.
Try assigning your iPod a different drive letter, by following the instructions from this Knowledge Base article, here:
Windows confuses iPod with network drive or hard drive
Also, you could try reformatting your iPod in FAT32 format, followed by a restore in iTunes, by following these steps:
1 - Connect your iPod to your computer.
2 - When iTunes has finished syncing with your iPod, open "My Computer".
3 - Right-click on your iPod, and click on "Format". (If your iPod is not showing in My Computer, make sure that disk use is enabled in iTunes).
4 - Here, verify that your formatting settings are "Default", with the format type set for FAT32. Also, make sure that "Quick Scan" is not selected.
5 - Then, click on "OK" to begin the formatting process.
6 - When this is complete (it might take a while), make sure to restore your iPod in iTunes again, so as to properly reload the firmware back onto it again.
-Kylene -
Songs replays over and over, tried restoring doesn't work.
With my new iPod shuffle sometimes it replays songs and I had to skip, but then sometimes it can continuously loop the same song over and over.
I restored my iPod to factory settings, deleted and reapplied the entire library to my iPod and it still does this.
Anyone else having this issue and can anyone help?{quote:title=GenericUsernameHere wrote:}{quote}
Restoring my iPod Video doesn't seem to work as every time I restore it, it only continues to ask me to restore over and over again to no avail.
Hi GenericUsername,
It sounds like you might be having a issue of drive letter confusion here.
Try assigning your iPod a different drive letter, by following the instructions from this Knowledge Base article, here:
Windows confuses iPod with network drive or hard drive
Also, you could try reformatting your iPod in FAT32 format, followed by a restore in iTunes, by following these steps:
1 - Connect your iPod to your computer.
2 - When iTunes has finished syncing with your iPod, open "My Computer".
3 - Right-click on your iPod, and click on "Format". (If your iPod is not showing in My Computer, make sure that disk use is enabled in iTunes).
4 - Here, verify that your formatting settings are "Default", with the format type set for FAT32. Also, make sure that "Quick Scan" is not selected.
5 - Then, click on "OK" to begin the formatting process.
6 - When this is complete (it might take a while), make sure to restore your iPod in iTunes again, so as to properly reload the firmware back onto it again.
-Kylene -
Session Replication doesn't work when using a custom Unicast Channel
Hello!
After configure a WLS Cluster for an WebApp with session replication support enabled I faced some issues with cluster configuration.
My LAB env used for this configurations is:
One Solaris 10 SPARC box.
-- One WLS 11g (10.3.6) domain with:
---- 4 Managed servers:
---- Admin server
---- server-1
---- server-2
---- Proxy Server (HttpClusterServlet)
--- 1 Cluster composed by:
---- server-1
---- server-2In that setup I noticed if I define a custom network channel for servers ( server>protocols>channels ) in the cluster and set Cluster Messaging Mode as Unicast* in the Cluster config ( Cluster>Configuration>Messaging>Messaging Mode ), so the session state replication does not work.
When I enable the cluster replication debug for managed servers the following messages appears:
<> <> <1358966729933> <BEA-000000> <[roid:-1772481434088297851] Creating primary for application key /webapp>
####<Jan 23, 2013 4:45:29 PM BRST> <Debug> <ReplicationDetails> <de25503> <server-1> <[ACTIVE] ExecuteThread: '5' for queue: > 'weblogic.kernel.Default (self-tuning)'> <<ano
nymous>> <> <> <1358966729958> <BEA-000000> *<Has secondary servers? false>*
####<Jan 23, 2013 4:45:29 PM BRST> <Debug> <ReplicationDetails> <de25503> <server-1> <[ACTIVE] ExecuteThread: '5' for queue: >'weblogic.kernel.Default (self-tuning)'> <<ano
nymous>> <> <> <1358966729959> <BEA-000000> *<Current secondary server? null>*
####<Jan 23, 2013 4:45:29 PM BRST> <Debug> <Replication> <de25503> <server-1> <[ACTIVE] ExecuteThread: '5' for queue: >'weblogic.kernel.Default (self-tuning)'> <<anonymous>
<> <> <1358966729959> <BEA-000000> <[roid:-1772481434088297851] Unable to create secondary on null>
####<Jan 23, 2013 4:45:31 PM BRST> <Debug> <ReplicationDetails> <de25503> <server-1> <[ACTIVE] ExecuteThread: '5' for queue: >'weblogic.kernel.Default (self-tuning)'> After eliminate all possible issues with my webapp (serialization, weblogic descriptor configuration, etc) and try many cluster network configurations I noticed that this problem only occurs when I use Unicast for Cluster's Messaging.
At the end of the day I really would like to understand why the session replication only works for Cluster's Messaging using Multicast mode. I read a lot the WLS docs (specifically the cluster/network topics) [1][2], but I can't find an official explanation about this.
Can someone help me understand this behavior?
Many thanks.
[1] http://docs.oracle.com/cd/E15523_01/web.1111/e13701/network.htm
[2] http://docs.oracle.com/cd/E15523_01/web.1111/e13709/setup.htmI have Fluxbox started with Slim and .xinitrc. Dbus works only with:
exec ck-launch-session startfluxbox
you need run Openbox with ck-launch-session:
exec ck-launch-session openbox-session
Bye!! -
Failover is work, but Session replication doesn't work!
Dear all,
My Cluster can failover, but can't session replicate....
I start up the 2 WLS 6.0 and the Web Server, then I visit
http://web_server_ip/myWebApp/SessionServlet serveral times, then the
counter variable in the session raise up, then I down the "target" WLS, then
I try http://web_server_ip/myWebApp/SessionServlet now, I can call but the
counter restart.... so the session seems not yet replicated. what I can
do...?!
My Setup: I setup a Netscape Web Server 3.6.3 as the proxy using libproxy.so
with the cluster setting, and use 2 WLS 6.0 (both are running in 7001,7002)
as the Application Server Cluster (WLCluster). one WLS is on Unix Machine
and the other in on a NT. I set the 2 WLSs: the Primary Group is
"WL_rep_group1", and set the secondary is "WL_rep_group2".
Deployment: I deploy the application "myWebApp" (.war) on the servers unix
and nt, adn also deploy to the cluster WLCluster.
I deploy the examplesWebApp to my created domain "demo", and modify the
weblogic.xml:
<weblogic-web-app>
<session-descriptor>
<session-param>
<param-name>PersistentStoreType</param-name>
<param-value>replicated</param-value>
</session-param>
</session-descriptor>
<jsp-descriptor>
<jsp-param>
<param-name>
pageCheckSeconds
</param-name>
<param-value>
1
</param-value>
</jsp-param>
<jsp-param>
<param-name>
verbose
</param-name>
<param-value>
true
</param-value>
</jsp-param>
</jsp-descriptor>
</weblogic-web-app>
so ... anything I did wrong, so the WLS can't do Session replication??!!
Please Help or Comment!
Thanks in advance!
with thanks,
Alex Wong
Dear Vinod and Kevin,
Some more information that I think it may help.
First, I want to correct 1 point in my previous message, the Replication
Group is "WLRepGroup1" and the Preferred Secondary Group is "WLRepGroup2"
for the 2 machine WLSs.
Second, I found that the Multicast Communication is not functioning becoz
the switch of my office block the 224.0.0.1's communication, so now I added
a hub for this 2 machine, as a result the multicast is wokring... at least
pass the java utils.MulticastTest....
Thrid, after the mutlicast work, I try the SessionServlet, it is working at
beginning... but after some more clicks, one server will cause the following
error (this time crash on x.y.z.b--NT machine)....
-------- (a long list, the IPs are replaced: x.y.z.a UNIX machine, x.y.z.b
NT machine, x.y.z.c My PC)
Screen caption on demo>Servers>wlserver2 (monitoring> cluster)
Unexpected Error
Connected to x.y.z.a:7001 Active Domain: demo Jun 11, 2001 5:06:23 PM
GMT+08:00
An unexpected error was encountered in processing your request.
Exception
java.lang.NullPointerException
<>
Current Date
Mon Jun 11 17:06:23 GMT+08:00 2001
Console Release Build
6.0 Service Pack 2
Console Build
6.0 Service Pack 2 05/24/2001 11:55:28 #117037
Server Release Build
6.0 Service Pack 2
Server Build
6.0 Service Pack 2 05/24/2001 11:55:28 #117037
All Server Product Versions
WebLogic Server Build: 6.0 Service Pack 2 05/24/2001 11:55:28 #117037
WebLogic XML Module: 6.0 Service Pack 2 05/24/2001 12:34:27 #117037
Request Info
Protocol: HTTP/1.1
ServerName: x.y.z.a
ServerPort: 7001
Secure: false
ContextPath: /console
ServletPath: /panels/mbean/Server.jsp
QueryString:
mbean=demo%3AName%3Dwlserver2%2CType%3DServer
PathInfo: null
PathTranslated: null
RequestURI: /console/panels/mbean/Server.jsp
AuthType: null
ContentType: null
CharacterEncoding: null
Locale: zh_TW
Method: GET
Session:
weblogic.servlet.internal.session.MemorySessionData@661950
RequestedSessionId:
OyQxOz4LG0WnLjufYcZDkIGGXIVAhHNASdBLUs2seZnvoQ4RXekX/console
RequestedSessionIdFromCookie: true
RequestedSessionIdFromURL: false
UserPrincipal: system
RemoteUser: system
RemoteAddr: x.y.z.c
RemoteHost: x.y.z.c
Parameters
mbean = demo:Name=wlserver2,Type=Server
Attributes
console.original./console/panels/mbean/Server.jsp.ContextPath = /console
console.original./console/panels/mbean/Server.jsp.Method = GET
console.original./console/panels/mbean/Server.jsp.QueryString =
mbean=demo%3AName%3Dwlserver2%2CType%3DServer
console.original./console/panels/mbean/Server.jsp.RemoteUser = system
console.original./console/panels/mbean/Server.jsp.RequestURI =
/console/panels/mbean/Server.jsp
console.original./console/panels/mbean/Server.jsp.ServletPath =
/panels/mbean/Server.jsp
console.preferences.ContextKey =
/panels/mbean/Server.jsp
javax.servlet.include.context_path = /console
javax.servlet.include.request_uri =
/console/common/requestinfo.jsp
javax.servlet.include.servlet_path =
/common/requestinfo.jsp
javax.servlet.jsp.jspException =
java.lang.NullPointerException
weblogic.httpd.user = system
weblogic.management.console.tags.ContentTag =
java.lang.Object@545f89
weblogic.management.console.tags.HeaderTag =
java.lang.Object@4c5c6c
weblogic.management.console.tags.TabbedDialogTag =
java.lang.Object@7eafc
Headers
Accept = image/gif, image/x-xbitmap, image/jpeg, image/pjpeg, */*
Accept-Encoding = gzip, deflate
Accept-Language = zh-tw
Connection = Keep-Alive
Cookie =
JSESSIONID=OyQxOz4LG0WnLjufYcZDkIGGXIVAhHNASdBLUs2seZnvoQ4RXekX!143710744761
7668081!-896735123!7001!7002!NONE
Host = x.y.z.a:7001
User-Agent = Mozilla/4.0 (compatible; MSIE 5.01; Windows 98)
BrowserInfo
User-Agent: Mozilla/4.0 (compatible; MSIE 5.01; Windows 98)
IE: true
Netscape: false
Supported: true
JavscriptHrefs: false
TableCellClick: true
DocumentReloadedOnResize: false
DropdownStretchable: true
CellSpacingBlank: false
EmptyCellBlank: false
ImgOnclickSupported: true
TableBorderFancy: true
PartialToWideTables: false
Server System Properties
bea.home = /u0/weblogic
file.encoding = ISO8859-1
file.encoding.pkg = sun.io
file.separator = /
java.awt.fonts =
java.awt.graphicsenv = sun.awt.X11GraphicsEnvironment
java.awt.printerjob = sun.awt.motif.PSPrinterJob
java.class.path =
/u0/weblogic/wlserver6.0:/u0/weblogic/wlserver6.0/lib/weblogic_sp.jar:/u0/we
blogic/wlserver6.0/lib/weblogic.jar:/opt/oracle/product/8.1.6/jdbc/lib/class
es12.zip
java.class.version = 47.0
java.ext.dirs = /u0/weblogic/jdk130/jre/lib/ext
java.home = /u0/weblogic/jdk130/jre
java.io.tmpdir = /var/tmp/
java.library.path =
/u0/weblogic/jdk130/jre/bin/../lib/sparc/hotspot:/u0/weblogic/jdk130/jre/bin
/../lib/sparc::/lib:/usr/local/easysoft/oob/client:/usr/local/easysoft/lib:/
u0/weblogic/wlserver6.0/lib/solaris:/u0/weblogic/wlserver6.0/lib/solaris/oci
816_8:/usr/lib
java.naming.factory.initial =
weblogic.jndi.WLInitialContextFactory
java.naming.factory.url.pkgs = weblogic.jndi.factories
java.protocol.handler.pkgs =
weblogic.utils|weblogic.utils|weblogic.net|weblogic.management|weblogic.net|
weblogic.net|weblogic.utils
java.runtime.name = Java(TM) 2 Runtime Environment,
Standard Edition
java.runtime.version = 1.3.0
java.security.policy =
=/u0/weblogic/wlserver6.0/lib/weblogic.policy
java.specification.name = Java Platform API Specification
java.specification.vendor = Sun Microsystems Inc.
java.specification.version = 1.3
java.vendor = Sun Microsystems Inc.
java.vendor.url = http://java.sun.com/
java.vendor.url.bug =
http://java.sun.com/cgi-bin/bugreport.cgi
java.version = 1.3.0
java.vm.info = mixed mode
java.vm.name = Java HotSpot(TM) Client VM
java.vm.specification.name = Java Virtual Machine
Specification
java.vm.specification.vendor = Sun Microsystems Inc.
java.vm.specification.version = 1.0
java.vm.vendor = Sun Microsystems Inc.
java.vm.version = 1.3.0
javax.rmi.CORBA.PortableRemoteObjectClass =
weblogic.iiop.PortableRemoteObjectDelegateImpl
javax.rmi.CORBA.UtilClass = weblogic.iiop.UtilDelegateImpl
javax.xml.parsers.DocumentBuilderFactory =
weblogic.xml.jaxp.RegistryDocumentBuilderFactory
javax.xml.parsers.SAXParserFactory =
weblogic.xml.jaxp.RegistrySAXParserFactory
jmx.implementation.name = JMX RI
jmx.implementation.vendor = Sun Microsystems
jmx.implementation.version = 1.0
jmx.specification.name = Java Management Extensions
jmx.specification.vendor = Sun Microsystems
jmx.specification.version = 1.0 Final Release
line.separator =
os.arch = sparc
os.name = SunOS
os.version = 5.6
path.separator = :
sun.boot.class.path =
/u0/weblogic/jdk130/jre/lib/rt.jar:/u0/weblogic/jdk130/jre/lib/i18n.jar:/u0/
weblogic/jdk130/jre/lib/sunrsasign.jar:/u0/weblogic/jdk130/jre/classes
sun.boot.library.path =
/u0/weblogic/jdk130/jre/lib/sparc
sun.cpu.endian = big
sun.cpu.isalist = sparcv8plus+vis sparcv8plus
sparcv8 sparcv8-fsmuld sparcv7 sparc
sun.io.unicode.encoding = UnicodeBig
user.dir = /u0/weblogic/wlserver6.0
user.home = /
user.language = en
user.name = root
user.region = US
user.timezone = Asia/Hong_Kong
weblogic.Domain = demo
weblogic.Name = wlserver1
weblogic.security.jaas.Configuration =
weblogic.security.internal.ServerConfig
weblogic.security.jaas.Policy =
/u0/weblogic/wlserver6.0/lib/Server.policy
---------- End of the message -----------
any comment?? is that I deploy on wlserver1, wlserver2, WLCluster cause
error??!! anything I did wrong??!
please help!! or Comment
with thanks,
Alex Wong
"Alex Wong" <[email protected]> ¼¶¼g©ó¶l¥ó
news:[email protected]...
> Hi Vinod and Kevin,
>
> Thanks Vinod first, and after I try the session.getClass(), I get the
> following output
> class weblogic.servlet.internal.session.ReplicatedSessionData
> I think that's means I am using "replicated" already, rite?!
>
> About the License, I cat the license.bea, there is a license to the
> "In-memory Replication - Servlet" and "In-memory Replication - EJB",
however
> it is a eval license but seems not yet expired, so I don't think that is
the
> problem, rite?
>
> And a quick question, you tell me "your configuration looks ok" means the
> H/W configuration, or the WLS configuration??!!
> Maybe I tell you more about my WLS configuration, so that, you can
> determinate where I go wrong. (thanks)
>
>
> Vinod and Kevin
> (Kevin, I am Alex Wong from ASL, if you have any comment, you can simply
> reply my personal email, thx)
>
> Steps I did to create the domain, WLS and Cluster and deploy the .war
> --- on Unix ---
> I create a demo domain and wlserver1 using port 7001 and 7002 by the
> installation program (ip x.y.z.a)
> --- on NT ---
> I create a demo domain and wlserver2 using port 7001 and 7002 by the
> installation program (ip x.y.z.b)
>
> --- on Unix ---
> start the wlserver1 with startWebLogic.sh
>
> --- My PC ---
> go http://x.y.z.a:7001/console
>
> create one more server named "wlserver2" using port 7001 and 7002
> create the cluster named "WLCluster" and fill the the cluster ip
> "x.y.z.a:7001,x.y.z.b:7001"
> fill the multi-cast ip 224.0.0.1
> add the "wlserver1" and "wlserver2" to the "WLCluster"
> stop the unix WLS
> start the unix WLS with startWebLogic.sh
>
> --- on NT ---
> start the WLS with startManagedWebLogic.sh wlserver2 http://x.y.z.a:7001
>
> --- on Unix ---
> install the NES 3.6.3 and create a WEB server instance and modify the
> obj.conf
>
> DETAIL
> ----- start of the obj.conf -----
> Init fn="load-modules" funcs="wl-proxy,wl-init"
> shlib="/opt/nes/plugins/weblogic/libproxy.so"
> Init fn="wl-init"
> .
> .
> .
> <Object name="weblogic" ppath="*">
> Service fn=wl-proxy \
> WebLogicCluster="x.y.z.a:7001,x.y.z.b:7001"
> </Object>
>
> <Object name=default>
> *NameTrans ...
> *NameTrans ...
> *NameTrans ...
> *NameTrans fn=document-root root="/opt/nes/docs"
> Service method="(GET|HEAD|POST|PUT)" type=text/jsp fn=wl-proxy \
> WebLogicCluster="x.y.z.a:7001,x.y.z.b:7001"
> .
> .
> .
> </Object>
>
> <Object name=cgi>
> .
> .
> .
> </Object>
> ----- End of the obj.conf ----- (I suppose will redirect all HTTP request
to
> WLS from NES)
>
> --- My PC ---
> go http://x.y.z.a:7001/console
> assign the DefaultWebApp_wlserver1 to wlserver1
> assign the DefaultWebApp_wlserver2 to wlserver2
> assign the console the wlserver1 only
> assign the certificate to wlserver1, wlserver2, WLCluster
> go SERVER-wlserver1 assign "WLRepGroup1" to Replication Group and
Preferred
> Secondary Group
> go SERVER-wlserver2 assign "WLRepGroup1" to Replication Group and
Preferred
> Secondary Group
>
> --- on Unix ---
> go to ./config/examples/applications/examplesWebApp/WEB-INF
> modify the weblogic.xml
> go to ./config/examples/applications/examplesWebApp
> jar cvf myWebApp.war *
> copy the myWebApp.war to ./config/demo/applications/.
> and ftp myWebApp.war ro (NT)./config/demo/applicaitons/.
>
> --- My PC ---
> And then now, I can visit http://x.y.z.a:7001/console
> now I can configuration the myWebApp.
> assign the myWebApp to wlserver1,wlserver2,WLCluster
>
> --- on Unix ---
> stop the WLS and start with startWebLogic.sh
>
> --- on NT ---
> stop the WLS and start with startManagedWebLogic.sh wlserevr2
> http://x.y.z.a:7001
>
> --- My PC ---
> visit http://x.y.z.a/myWebApp/SessionServlet (this time no port 7001,
becoz
> I want to use the NES web server to proxy the HTTP request)
>
> Finally... I can failover the SessionServlet, SnoopServlet and all the
other
> html, jsp, servlet, but seems can't load-balancing and Session
Persistence.
>
> Is that anything I did wrong, please comment!
>
>
> with thanks,
>
> Alex Wong
>
>
>
> "Vinod Mehra" <[email protected]> ¼¶¼g©ó¶l¥ó
> news:[email protected]...
> > Your configuration looks ok but I guess somehow your clustering is not
> setup
> > properly. Check if all the servers are listeniong on the same port and
> part
> > of
> > the same cluster. Also check if you have clustering license.
> >
> > Make sure your sessions are of type : "replicated". For that print
> > the value of session.getClass(), the name will give you an idea. Check
> > your logs if you got any error message.
> >
> > --Vinod.
> >
> >
> > "Alex Wong" <[email protected]> wrote in message
> > news:[email protected]...
> > > Dear all,
> > >
> > > My Cluster can failover, but can't session replicate....
> > >
> > > I start up the 2 WLS 6.0 and the Web Server, then I visit
> > > http://web_server_ip/myWebApp/SessionServlet serveral times, then the
> > > counter variable in the session raise up, then I down the "target"
WLS,
> > then
> > > I try http://web_server_ip/myWebApp/SessionServlet now, I can call but
> the
> > > counter restart.... so the session seems not yet replicated. what I
can
> > > do...?!
> > >
> > > My Setup: I setup a Netscape Web Server 3.6.3 as the proxy using
> > libproxy.so
> > > with the cluster setting, and use 2 WLS 6.0 (both are running in
> > 7001,7002)
> > > as the Application Server Cluster (WLCluster). one WLS is on Unix
> Machine
> > > and the other in on a NT. I set the 2 WLSs: the Primary Group is
> > > "WL_rep_group1", and set the secondary is "WL_rep_group2".
> > >
> > > Deployment: I deploy the application "myWebApp" (.war) on the servers
> unix
> > > and nt, adn also deploy to the cluster WLCluster.
> > >
> > > I deploy the examplesWebApp to my created domain "demo", and modify
the
> > > weblogic.xml:
> > > -------------------
> > > <weblogic-web-app>
> > >
> > > <session-descriptor>
> > > <session-param>
> > > <param-name>PersistentStoreType</param-name>
> > > <param-value>replicated</param-value>
> > > </session-param>
> > > </session-descriptor>
> > >
> > > <jsp-descriptor>
> > > <jsp-param>
> > > <param-name>
> > > pageCheckSeconds
> > > </param-name>
> > > <param-value>
> > > 1
> > > </param-value>
> > > </jsp-param>
> > > <jsp-param>
> > > <param-name>
> > > verbose
> > > </param-name>
> > > <param-value>
> > > true
> > > </param-value>
> > > </jsp-param>
> > > </jsp-descriptor>
> > >
> > > </weblogic-web-app>
> > > ---------------------
> > >
> > > so ... anything I did wrong, so the WLS can't do Session
replication??!!
> > >
> > >
> > > Please Help or Comment!
> > >
> > > Thanks in advance!
> > >
> > > with thanks,
> > >
> > > Alex Wong
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> >
> >
>
>
-
I upgraded to 4.0.1 today. After upgrading, I looked for my bookmarks but they were not present. I attempted to use the restore function. It appears to work, but still no bookmarks. I looked at my profile directory and the file I attempted to restore from under 'bookmarkbackups' has valid data in it. Why does restore not work? How do I get my bookmarks back?
Woo,
I reinstall the firefox (3.6.4 ) again. Then all of the above problems are gone. So, no need to worry....
Maybe you are looking for
-
Hi all, I want to print the SQL Report returned from a simple query returning 5 columns, and n number of rows. I don't want to use Oracle BI Publisher as its needs licence to work with. Can anyone let me know which software i can use with my applicat
-
Hi Guys, I have a small doubt. I am working on Idoc to JDBC scenario. In which i have done all the Idoc settings both in ECC and aswell as in PI. My doubt is. 1.What is the neccesity of creating RFC destination both in ECC and PI? is there any specf
-
Almost all Nokia phones have a streaming client built into them that is able to stream video's from websites or even network operator sites such as Vodafone Live. In order to stream correctly you will need the correct streaming settings from your net
-
Problem Sorting Photos in Slideshow
I created a slideshow, putting the photos in the desired order. Now, for a reason I cannot understand, that order is completely reversed--front to back. When I go to View-Sort, everything is grayed out. Is there a keystroke that will reverse the orde
-
Wife's computer down the hall from printer not able to peint
I have an HP 8600 all in one wireless printer. It sets right next to my laptop and works great. A few months ago my wife got a dell computer in her office down the hall. It found the printer and worked okay for awhile. But now it's not printing all t