4.0EA3 Redrawing of Relationship and FK Lines

Is there a way to tell SDDM not to redraw automatically. I get my diagram the way I want it and then accidentally bump an entity or table and all the lines get redrawn center to center. An undo would be nice.
If there isn't a way I would like to add it as an enhancement request.
Marcus Bacon

Thanks. That is good for the accidental bump but what if I need to stretch an entity/table? Can I turn off auto redraw?
I know others have asked before but please allow us to turn off auto redraw and allow redraw of individual or group elements on demand. Anyone else see this as a desirable feature?
Here is my situation. I have a parent company entity and 12 child lookup entities which have relationships to a child entity, sort of like a fact table. The company entity goes across the top and has 12 relationships to the lookup tables which are placed below the parent and are staggered just enough for the relationship line connection to show. I have to move from 11 of the relationship lines from the center of the lookup entity to the left edge. The company entity also has a relationship to the "fact" entity and each lookup has a relationship to the fact entity which is below the company entity and to the right of the lookup entities.. Now I have a new lookup entity to add but the company entity needs to be stretched just a little to accommodate the new lookup. When I stretch the parent all 12 of the relationship lines to the lookup tables auto redraw to the center of those tables except for the one directly under the company table and I now have to move 12 relationship lines to be able to see the identity and nontransferable graphics. Then I have to repeat the process for the relational model. It should look something like this: If the diagram isn't clear make sure it is in a fixed pitch font.
+----------------------------------+
|                                  |
+----------------------------------+
|    |    |       |            |
|    |    |       N            N
|    |    | +--------+      +----+
|    |    | |        |-----<|    |
|    |    N +--------+      |    |
|    | +--------+           |    |
|    | |        |----------<|    |
|    N +--------+           |    |
| +--------+                |    |
| |        |---------------<|    |
N +--------+                |    |
+--------+                     |    |
|        |--------------------<|    |
+--------+                     +----+

Similar Messages

Relationship between Sales Order and Delivery line item

Hello,
Can any body explain me the relationship between Sales Order,Sales Order Line Item, Delivery and Delivery line item,Shipment and Shipment line item,
Please provide me the documentation if you have with the entity relation ship diagrams.
Thanks,
Ganga

Sales order is the order from your customer and delivery is when you are delivering the item.
Shipping: In general when the item is dispached from the warehouse, we can say the item is shipped,where as delivery is item/product reaching to the end customer.
Hope it helps,
Kiran

How to change category on open and closed PO and Requisition lines

We realized a little late that our category definition needs change. But when we change the category definitions (including structure) how do we change the existing PO lines and Requisition lines to have the new categories? We checked for any APIs, but there are none. What other option do we have?

changing the name of the home directory and the login name is not advisable. it can be done
http://www.macworld.com/article/132693/2008/03/changeshortusername.html
but a better way would be to make a new user account using system preferences->accounts. call it whatever you want. log into that and delete the old account. since you just got this computer you don't have any data on it yet, right?

How to add a JPanel with label and border line

hi,
I want a Jpanel with label and border line like this.Inside it i need to have components.Is there a resuable component to bring this directly??
Any solution in this regards.???
Label-----------------------------------------------------------
| |
| |
| |
| |
| |
|________________________________________ |

[url http://java.sun.com/docs/books/tutorial/uiswing/misc/border.html]How to Use Borders

NEW CELL and NEW LINE

Hi,
I am not clear about NEW CELL and NEW LINE in The Main window -> Table -> Footer -> Output options -> Output Table. Could any one help in explaining exactly what is the purpose of it.
Thanks
Ram

when you are placing a text element, you need to specify whether you want this text element to be displayed in the next cell of the table. If the text element is to be displayed in the next line then you will have to check that as well. So, if you are displaying a list of fields in a row format then for the first field, you check both line and cell and for the rest of the fields you check just the cell.
Regards,
Ravi
Note - Please mark all the helpful answers

Derivation of Profit Centers in case of bank and Cash line items

We are in the process of configuring the Profit Center Accounting functionality. We are in ECC 6.0 but have not migrated to New G/L.
We understand that Profit center needs to be derived for each of the items for which it does not flow online in realtime. As regards Bank and Cash Line Items, we are not able to understand how Profit Center Derivation will happen.
We have posted an FI payment document using Tcode F110 and further to which we executed F.5D and 1KEK. Further to this, we have checked the Profit Center Total records report (2KEE). It updates the vendor line items. But it does not reflect the Bank line item. Unless this happens, we understand that our Profit Center wise Trial Balance will not tally.
Kindly let us know how bank and Cash line items will update in PCA. In our view, it should derive the Profit center from the offsetting entry in the vendor invoice. Pl. correct me if I am wrong.
Pl. help.
Venkat Iyer

Hi Venkat,
You may define a derivation rule in 3KEH
Regarda
Sachin

Profit Center population in the Vendor and Customer Line items

hello
our client is asking for getting profit center in the vendor and customer line items where in the view FBL5n and fbl1n we are not getting the profit center populated - in the new gl i understand that there is a standard report based on the gl account.
but our business is not satisfied with the report and expecting report at profit center level.
Can any one suggest any way of doing this.
regards,
Vijay

Dear Vijay,
Let me provide you my view of solutioning for this. This is an enahcement that needs to be done
1. You can get the profit center from the given vendor and customer line item at the time of posting, using an enahcement you will be able to capture it.
2. Existing the profit center field is not populated in the BSIK,BSAK,BSID and BSAD tables
3. Hence, in the same enhancement once you capture the profit center , you can write the code that profit center is updated in these tables also.
4. This will help you to do the vendor line item wise selection in the FBL1N, FBL5N profit center wise.
Constraints of this solution:
The only constraint remains where in the for a given document if there are multiple profit center, then the system will do the splitting profit center wise for a vendor line item, which will not populate the profit center in those tables as there is only one field available in the bsid etc.. tables.
This basically would be the one the soltuion where in as seeen from the end user ther eis no change in the front end interface , the way they are doing always they can do.
You need to also take care the % of document splitting means cross profit center postings /cross document splitting charactericstics postings and the volume involved in this. so that you can suggest this to your client.
Regards,
Bharathi.

FBCJ LINE ITEM AND FI LINE ITEMS ARE DIFFERENT

Dear Expert
FBCJ LINE ITEM AND FI LINE ITEMS ARE DIFFERENT

Hi,
It seems from the screen shot you are seeing different documents as in the first screen shot it clearly shows you have booked the multiple expenses under one see the below screen shot we have circled it
whereas FB03 screen shows different.
You can do one thing click on circle item and check the expenses involved in it and accordingly go to FBL3N and display documents for that G/L for the date 05.04.2014.
Hope your issue has been resolved else revert.
Regards,
Tejas.

ETD and Base line are not matching

Hi All,
My requirement is in production server, for some invoices the Expected time departure and base line date are not matching,
What will be the reason behind this? Can you please advice how to approach to this problem.?
Thanks in advance
jaya.G

Hi,
could you please eloborate the issue?
Thanks,
Srinu

ALV Grid Control - Modifiy data in total and subtotal lines

Hello all,
I´am creating a report using ALV Grid Control. This report calculates (using delivered and returned materials) for each vendor/material-combination the return quote.
Using the totals and subtotals function for different characteristics I want to calculate the return quote for the selected characteristic. Example:
Material delivered returned quote
..4711 . . . 500 . . . 5 . . . . 1 (=returned*100/delivered)
..4711 . . . 400 . . . 10 . . . . 2,5
. SUM . . . 900 . . . 15 . . . . 3,5 <-- 3,5 is the sum but I want display the calculated value 1,667
Is there a possibility to modify data in the total and subtotal lines.
Thank you for your answer
Best regards
Thomas

you said instead of 3.5 you want to show 1,667 ..
how is it possible...
3,5 become 1,667
i thought you are doing any conversions...
vijay

500k profile after disruption and new line install...

Hello,
Status:
I have an open fault logged with BT;
Phone line ok but broadband speed low, profile appears stuck at 500k.
History: sporadic BBand connection and noisy phone line followed by outright failure of both.
Engineers visited and confirmed line between street and master socket probably corroded - they put it on leg+leg to get it working while we waited for a new physical line to be installed.
Pavement was dug up, new armoured cable run from street to house, and a proper master socket fitted (NT5 ? but no inbuilt ADSL filter).
In effort to ensure low noise, ALL other sockets in the property disconnected.
Digital phone (3 handsets off a single powered base) are run off the master socket using a filter.
Router is business hub - 2700hgv; f/w 6.1.1.48.1-enh.tm , h/w 2701-100589-005 .
Hub is connected to same master socket as phone (as it's the only socket now connected to the new line).
New line was installed approx 18 days ago.
Speed tests (speedtest.net) repeatedly show download of 480kbps, upload around 620kbps.
No change since new line was installed and all but the master socket decomissioned.
I use wireless to the router but also repeated tests with a Cat6 copper RJ45 cable and got same results.
Have taken all wireless devices offline and removed electrical items near phone line power supply and cable path to reduce potential noise and repeated tests.
I left the router on for two weeks and no increase in broadband speed.
I rebooted it twice this weekend to see whether it picked up a different profile - but no change.
BT speedtester repeatedly indicates a profile of 500k (full results further down).
Last year I had speeds about 512k on a DrayTek router before switching to the 2700HGV. The change to the BT hub upped the download speed to around 1Mbps, which made a huge difference.
I know I am "a long way from the exchange" but I've had 1Mbps last year and now have a new line into my property, so not much left that I can do to improve the situation.
I'd like to know what can be done to get me at least 1Mb download again.
I have an engineer visit due tomorrow but I believe that will be purely to finish putting paving slabs back over the armoured cable that's been installed (i.e. OpenReach dig team rather than line engineers).
After those slabs are done, I expect the fault will be closed but I'll still have a 500k profile and will need to raise a new fault all over again - that fault was opened 5 weeks ago.
Results of speedtester.bt.com run just now (1pm Sun 13th March 2011):
Download speed achieved during the test was - 363 Kbps
For your connection, the acceptable range of speeds is 100-500 Kbps.
Additional Information:
Your DSL Connection Rate :576 Kbps(DOWN-STREAM), 777 Kbps(UP-STREAM)
IP Profile for your line is - 500 Kbps
The throughput of Best Efforts (BE) classes achieved during the test is - 2.46:14.86:82.95 (SBE:NBEBE)
Upload speed achieved during the test was - 638 Kbps
Additional Information:
Upstream Rate IP profile on your line is - 777 Kbps
Router web interface shows:
Rate:
576 kbs
778 kbs
Max Rate:
2621 kbs
784 kbs
Noise Margin:
16.7 dB
7.0 dB
Attenuation:
62.8 dB
35.8 dB
Output Power:
16.1 dBm
12.4 dBm
Protocol:
G.DMT2 Annex A
Channel:
Interleaved
DSLAM Vendor Information
Country: {46336} Vendor: {IFTN} Specific: {48753 }
ATM PVC:
0/38
Rate Cap:
2621 kbs
Attenuation @ 300kHz:
62.8 dB
Uncanceled Echo:
-14.8 dB
Ok
VCXO Frequency Offset:
-2.0 ppm
Ok
Final Receive Gain:
34.5 dB
Ok
Impulse Noise Comp. Tones:
0
Ok
Excessive Impulse Noise:
0
Ok
I hope that's the information that someone might need to help me at least get 1Mbps back on my line.
Regards,
BK

Hi Bk1
Welcome to the Community.
Send me an email to the link in the about me section of my profile.
I can have this looked into for you further.
Cheers
Stuart
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Possible to use both optical out AND regular line out at the same time?

I currently have my computer speakers (logitech z560) hooked up to the mac pro via regular stereo jack in the back. I have an extra receiver that I would love to hook in to supply me with some needed sound for movie watching and what-not.. Is there a way to enable both line out - digital and line out at the same time?

You can set DVD Player's "Audio output" to "Digital Out" in its "Disc Setup" preference, while other applications use Line Out.
You could use a splitter on Line Out to feed your current speakers, and analog Line In on your receiver. When you want sound to both systems, set the receiver to Line In. When you want to watch DVDs, set it to Digital In. This will give you surround sound if the DVD has multichannel sound, and the receiver supports more than two channels.
If you really want the same output on the Mac Pro Line Out, and Digital Out, you can use the "Auxiliary Device Output" effect in Audio Hijack Pro
<http://www.rogueamoeba.com/audiohijackpro/>
It will not support more than two-channel audio.

Control parallel port (data and control lines)

I need to control the output on the parallel port (LPT1) - Both data and control lines. Once the data is written (Pins2-9), I then need to toggle the Sprocket signal (PIN1) - on the parallel port. The sprocket signal is also referred to as the Data Strobe Output.
The required method is as follows:
1. Lower the sprocket signal on PIN1
2. Send the data (Pins2-9) and wait
3. Raise the sprocket signal and wait.
4. Repeat.
I am looking for a method to control the data on LPT1 pins 2-9 and then be able to toggle PIN1 - Strobe signal - without the data falling from the other pins. What I have found is that whenever the state is changed on the strobe - the data that was written to Pin2-9 falls to zero. This will not work for my application - the strobe tells the hardware device that the data is ready. If it falls to zero when I toggle the strobe - that will not work.
Regards,
Guy

Hello Adam,
I am familiar with both references. If you look more closely at the library reference - it allows me to communicate using VISA across the parallel port pins 2-9. It does not permit direct communication to pin1 (the strobe signal) - property nodes don't allow the strobe to be refereced either (similar to control lines/signals for COM ports).
Worse, I have also located examples using OUT PORT that does enable pin1 to be toggled. The problem is, when those VIs are used, the data falls from the data pins when the strobe signal is written, even if its value is not changed. For example, if the strobe is already high, if another high value is passed, the data falls from the data lines. The other issue, when using VISA, as soon as the data is writen, the strobe signal automatically goes high even though I need a wait before setting the strobe high. This is in complete contradiction to the second article you referenced which clearly discusses writing data to pins2-9 then taking the strobe high to indicate to the printer that new data is available. It must be possible since this is the typical handshake.
I am still looking for a more complete answer/solution.
Regards,
Guy

Profit centerwise Vendor and Customer line items view

Deal ALL,
We have not activated Business Area.
We have 10 plant under one company code. Client is booking the vendor and customer invoice as per the cost center and profit center of the plant. Payment and Receipt is also made according the bank maintain for each plant. As one customer or vendor is dealing with all the plants.
Can any body can help me out how to get the vendor and customer line item display according plant or cost or profit center wise, so we can make or receive payment accordingly.
Request you all to reply.
Thanks & Regards,
Bhadresh

Hi
Try the transaction codes for Profit Display by suitable config in TCode O7F1, O7F2, O7F3
Assign Points if useful
Regards
Sanil

MacBook pro doesnt start. When I start my lap top, it shows the apple and the line uploading but it only goes like to 1/3 and then it goes blank for some seconds, then it turns off by itself and turn on again and happen the same, apple logo, etc

MacBook Pro doesnt start. When I start my lap top, it shows the apple and the line uploading but it only goes like to 1/3 and then it goes blank for some seconds, then it turns off by itself and turn on again and happen the same, apple logo, line .. the noise like-fan going on, then turn off and turn on again. Tried starting holding option command P and R key and didnt work either. Starting to think I have lost all my data inside

Try a SMC reset.
http://support.apple.com/kb/ht3964
It might be helpful if you indicated the exact model/year of your MBP. Are you running Lion OSX?
Ciao.

4.0EA3 Redrawing of Relationship and FK Lines

Similar Messages

Maybe you are looking for