4.1 update on 3GS causes music to jump/skip on Pioneer head unit

Hi.
Regrettably I updated to iOS 4.1 before leaving on a 4 week trip.
Not good as now when it's plugged into my Pioneer head unit using USB the iPod feature is unusable.
It skips and pauses in about 5sec bursts of music.
I'm staring down the barrel of 8000 km & 4 weeks with no music!
Not good Apple. You need to fix this asap!
Now my phone is just a phone. Not good enough at all.
Dave

I too am suffering greatly with my beloved ipod 64. It has always had minor skipping that seems to come and go when connected to my Pioneer avh-4100dvd. I never thought to blame updates for the problem as I use the travel van just once or twice a month the Pioneer is in. Recently I told my Audio installer the Pioneer needs fixing or I'm ready to junk it but if it's a os bug what are we supposed to do?

Similar Messages

  • IPhone not working on Pioneer head unit after update...

    After updating to iOS4 my iPhone no longer works well with my pioneer AVHp3100 DVD head unit. Does anyone else own this head unit and have this problem?

    Similar problem
    http://discussions.apple.com/thread.jspa?threadID=2470321&start=0&tstart=0

  • Just updated my 3gs with the new iOS5 software and my music is not on the phone

    I just updated my 3gs to the new iOS5, and my ipod library is gone. No music, or videos! What should i do to get them back? Tried syncing the music hoping it would work, and it did not. Any tips?

    Same problem with my iphone 3gs - synced and resynced untill blue in the face and now cannot sync at all... This IOS5 really buggered everything up.

  • Since updating my iPhone 3GS my music will not sync. I keep getting error 13019

    Since updating my iPhone 3GS my music will not sync. I keep getting an error message 13019.. I tried everything ..

    http://support.apple.com/kb/TS2830

  • IOS 4 update on 3GS: Album Artwork/author/title missing in some places

    Okay, I just updated my 3GS to iOS4 with no dramas, except for the iPod app.
    Basically, in Albums mode:
    - any album that wasn't from the iTunes Store (i.e. a CD rip) doesn't display its album artwork thumbnail, either in the list view or the new album summary info panel shown above the track listing when you click the album
    - in addition, the new album summary panel shows “Unknown Artist” and “Unknown Album” even though the page before (the full Albums list) did in fact show the artist and album title
    - however, clicking on a track will in fact show the correct album artwork while the track is playing
    In addition, in Cover Flow mode:
    - not only do the above affected albums also appear with no artwork,
    - but also clicking on them shows *no tracks* at all (whereas they do show up in Albums mode and are successfully playable).
    What the?! Anyone else found this? Seems to affect both MP3 and AAC ripped formats (and btw they are legal imports of my own CDs).

    I have a similar problem. All of my music won't show the album artwork, and some will even show artwork of a Genius Mix. I rotate to Cover Flow, and everything seems fine there; all of the artwork shows up and the songs are all there. But once I flip to portrait and the Now Playing screen, that artwork disappears and I'm left with that prosaic gray musical note or an ugly Genius Mix artwork with four of my original artworks arranged in a 2-by-2 grid. I set iTunes so that it wouldn't sync my music anymore, synced my iPod, turned music back on, and then synced my iPod again, essentially removing music and putting it back on my device, as the abovementioned suggests.

  • After updating my 3gs to ios 5.0.1, I can not restore my phone from my pc. It says session failed. It appears to be a backup available.

    After updating my 3gs to ios5.0.1, I can not restore my phone. It says session failed after about 20 seconds. It appears to be a restore point available. What should I do?

    Hi all,
    I work for an Enterprise with around 30 devices so far, 5 of them have been upgraded to iOS 5.01 and we are having this issue, the steps below are appearing, these are both on iphone and ipad 2's with exchange 2003:-
    - Exchange Calendars not sync'ing, but Yahoo account working fine.
    - Create an appointment on the ipad / iphone and this sync's with Exchange.
    - Close the Calendar and re-open the appointment disappears, but stay's within Exchange.
    - Meetings created within the Exchange Calendar do not synch with the iphone / ipad.
    This is starting to cause a lot of issues.
    Thanks
    Keith

  • Updating iphone 3gs to ios 5, is it safe or will i have issues?

    I've been weary about updating my iphone 3gs from ios 4 (4.3.5 to be exact) to the new ios 5.  I didn't have a problem sitting on an older update untill my phone started acting up and the only thing to do to fix it is to do a restore.  itunes is forcing me to update in order to restore (didn't used to do that untill the new itunes update came out a while back...makes me angry) therefore causing a bit of concern with me.  I do recall how the 3G acted when the ios 4 came out, and my worry is will the iphone 3Gs do something simmilar or worse.  What are the experiances you guys have had with it, both good and bad, I'm curious.  Also is it a good idea to update the 3gs to the ios 5 or not.

    Hi I updated my 3 gs without any problem a d it works fine my wife now has it since I got my 4S

  • If I update my 3gs from ios 4.1 to 6.1.3 will it crash the phone?

    if I update my 3gs from ios 4.1 to 6.1.3 will it crash the phone?

    If you are running iOS 4.1 on a stock, unmodified 3gs, you should
    have no problem. Do a backup of all your data, music, pictures, etc
    before as protection.
    If your iPhone has been jailbroken or hacked to work with a carrier
    other than the one the iPhone was originally locked to, you may
    have problems.

  • I updated my 3gs to 6.1.3 now I can't get mail the phone constantly restarts itself and I can't get it to Restore thanks Apple what can I do?

    I updated my 3gs to 6.1.3 now I can't get mail the phone constantly restarts itself and I can't get it to Restore thanks Apple what can I do?

    Im having the same problem, I updated my Iphone 4S to 6.1.3, shortly after that my phone had no audio. It was working fine one minute and then stopped. Was listening to music when sound gave out on me. It wont ring, phone just vibrates even after turning off vibration option. I've tried all the options listed and nothing. My phone has never been jailbroken either. If I connect the earphones is works perfectly. On one of my last calls received, phone's ringtone was heard for about 2 seconds before muting and just vibrating. Ringtone sounded perfect, speakers did not sound damaged. 
    What else could be done? I've read several post regarding this and it seems like Apple has no solution to this yet. Very dissappointed.

  • Will my iphone 3gs transfer music when upgrade to iso5

    I have a Power PC G5 running  10.4.11.
    I want to upgrade my iphones 3gs from ios4 to iso5.
    I have itunes 9 - which according to itunes is the latest one I can have.
    Itunes says I can, my concern is that when I upgrade the phone I will no longer be able to transfer music over. I know it wont over wifi- which is no big deal. Will it work when its plugged in?
    Thanks all.

    To use iOS 5, you need iTunes 10.5.x.
    To run iTunes 10.5.x, you need OS X Leopard.
    Don't update the 3Gs unless you first update iTunes.

  • I got the iphone iOS 7.1.1 update and now my music won't play and I can't download apps. Can I fix it?

    When i got the update at first the music would play while my headphones were in. I restored my iphone and now it won't play at all. I have tried to go in the settings for itunes and app store but it also won't load.

    Hi Jackson,
    Since you have already done a restore of your iPhone, I would suggest that you now try restoring your iPhone to factory settings, set it up again and test before you restore your content. This article describes the process -
    Use iTunes to restore your iOS device to factory settings
    http://support.apple.com/kb/HT1414
    Note - It is important that you follow this stop:
    Use iTunes to back up your device and transfer and sync any additional content to your computer.
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • OSX update 10.10.2 causes mouse to jump around and text to be highlighted randomly in Dreamweaver CC 2014

    OSX update 10.10.2 causes mouse to jump around and text to be highlighted randomly in Dreamweaver CC. When trying to click on a specific line of code in a js file the cursor ends up in a different place in the script and several lines of code highlighted. Clicking again jumps the mouse to a different position and even more lines of code highlighted and some characters rearranged, breaking the lines of code. Very frustrating.

    Preran,
    I am having the same issue. I have a MBP connected to 2 x Dell 27" monitors over Mini DisplayPort to HDMI cables. Once I updated to OS X 10.10.2 this cursor highlight/jumping around issue only occurs on the connected monitors. If I move the program to the main laptop display the issue goes away. It does not require me to restart the program or the machine to make it work correctly. One way I am able to identify the issue is if I go to the line numbers in code like I wanted to select multiple lines - in the one that works correctly, the cursor turns into a white version where the tip of the cursor points to the right. When it is wrong, the cursor stays black and will only have the tip point to the left. Its just another way I identified if it was working cause I tried uninstalling DW and reinstalling - didn't work. Reset preferences as you discussed - no go. And I used other editors like IntelliJ and Adobe Edge Code - all of which work fine and don't display this issue.
    I tried the preferences reset you suggest and it doesn't work. I have another machine with OS X 10.10.1 on it and this issue is not there on any monitor. Any help with this ASAP as it pretty much stops you from being able to do any editing especially with longer pages as it consistently wants to page up when you select anything and if you then click again in another area it tries to move the highlighted code to that new spot.
    Update: I have a USB Microsoft Arch touch mouse connected (always worked just fine). When I go to place my cursor at some point in the code it causes the highlight flicker. If I switch over and use the built in trackpad, then I can place the cursor without the highlight issue. When trying to select multiple lines or sections of code, that still see's the highlight, page up and move of code issues regardless of input type.

  • I updated my 3GS to os5 and set up icloud and it backed up, although, the backup says incomplete. I turned off the contacts and they are now all gone off the iphone. How do i get them back? I feel like they are in icloud, they are on other iphone i have.

    I updated my 3GS to os5 and set up icloud and it backed it up, although, the backup says incomplete. I turned off the contacts under icloud and they are now all gone off the iphone. How do I get them back? I feel like they are in icloud, because the contacts went to another iphone i have.

    I did turn the contacts back on and it didnt work. I am hoping the wi-fi connection I am on at school is not compatible, and it will work when I get home. Thanks!

  • Updated my 3gs to 5.0.1 and my battery life has gone from 1.5 days   to less than half a day with no Apps open - how can I roll this back to 5.0 until a fix comes out?

    Since updating my 3GS to 5.0.1 my iphone battery has gone, overnight, from 1.5 days + (with multiple open Apps) to less than half a day to completely discharge from 100%.
    I desperately need to roll this install back to 5.0 but there are no resources on the internet (or this site) which indicate how I would do that.
    Please help.
    J

    You cannot and should not go back to 5.0.
    A fix is coming soon

  • I updated my 3GS. It goes through the updating process then at the end a box pops up that says my phone is in recovery mode and cant finish. My phone has lost everything and doesn't even have the home screen just the iTunes symbol. What can I do?????

    I updated my 3GS to the latest OS. iTunes was updated first, when iTunes finishes updating my phone a box pops up that says my phone is in recovery mode so I click the update button and it goes the whole update cycle again. I unplugged my phone after 4 cycles of updating but now there is NOTHING on my phone, not even the home screen just the itunes symbol . I've tried rebooting my phone but there is still nothing there. HELP!!!!! What can I do

    sounds like your phone was jailbroken.

Maybe you are looking for

  • Create Contact details @ Customer Account Site

    Hi guys After loads of efforts I managed to create a contact @ Customer Account Site level using below API Call DECLARE p_cr_cust_acc_role_rec HZ_CUST_ACCOUNT_ROLE_V2PUB.cust_account_role_rec_type; x_cust_account_role_id NUMBER; x_return_status VARCH

  • C++ visual runtime error!

    I'm really hoping you guys have an answer for me.In the last couple of days, I have been receiving a runtime error whenever i try to affect the variables in my brushes pallette. I mean any little tweak, be it the angle of the preset or even just the

  • 'SELECT_LIST_FROM_LOV' giving error if LOV fetches 47 rows

    Hi All, We are using 'SELECT_LIST_FROM_LOV' function to create dynamic items in a tabular form. It works fine when LOV fetches < = 47 rows but is giving 'buffer overflow error' if it fetches more! Any help/suggestions would be appreciated. APEX Versi

  • STO- Different material number in 2 plants

    Dear all, I want to do STO for a material, Provided I want to maintain the different material number in two plants, Is it possible, if so pls reply me the procedure

  • Viewing a QT movie on PC created on a Mac

    I burned two Quick Time movies onto a data disk on a Power Mac G4 yesterday and brought them home to play on my PC. Windows OS tells me that it cannot read my disk and that it might be corrupted. I should be able to view QT movies whether on Windows