4.1 update - problems with stereo connectivity

I have a high end audio system in my car... Focals, w7, etc etc. It is ran by a avhp3100dvd. Since I updated my iphone4 to the new 4.1 OS, I get random static through the audio system. It is sporadic, lasts 3 to 4 seconds, goes away, and then comes back. It worked earlier today before I did the update. My itouch works fine, so I know it isn't the radio. I restored the iphone4 AGAIN (a clean restore btw, so I just spent an extra hour organizing my iphone again) just to see if the upgrade was corrupted somehow. I still have the same issue. The phone plays like normal with headphones, it is just when the iphone is synced to the radio.
I have seen numerous complaints about the new OS not being compatible with radios after updates. I was very hesitant to purchase the iphone4 because of this, but I tested it before I bought it, and everything worked with 4.0. That is the ONLY reason I purchased the iphone4. I felt like apple forced 3g customers to upgrade after the 4 update made them unusable. 3g phones need to be fixed with the new operating system and PLEASE FIX connection problems with other devices.
It doesn't make sense why an update would mess up connection capabilities with other devices (isn't that a step backward?). The reason why I have purchased apple devices (iphones, macbook, itouch, ipad) is because they typically just work. That hasn't been the case lately. Thanks for reading my rant

Thanks for the rant but it's probably better to contact Apple about this. We don't work for them.
Regards

Similar Messages

  • Every time I try and update my iphone 4 to ios 7.1 in iTunes 11.1.5 it says "connection reset" even when there is no problem with my connection

    I have an iPhone 4. I use iTunes 11.1.5 on my Mac. I am trying to update to ios 7.1 through iTunes, but every time I do that, I get a "connection reset" error, even when I know there has been no problem with my connection.
    The exact error message is as follows:
    "There was a problem downloading the software for the iPhone "Anne's iPhone". The network connection was reset.
    Make sure your network settings are correct and your network connection is active, or try again later."
    I have checked several times. There is no problem with the connection, and I have tried to download the software several times today.
    Any help you can give me would be appreciated.

    Just managed to successfully download the update, having retried five or six times. I did unplug my phone while the download was taking place (had asked iTunes to download only, not to update) -- suspect this had no bearing on it whatsoever, and that persistence is the only way here.

  • I'm trying to update my ipod touch but every time it downloads its fine until it processes it and it says it has a problem with my connection but my firewall is off?? Please help.

    but every time i try to its fine until it processes it and then it says it has a problem with my connection but my firewall is off?? Please help.

    I'm having the same problem trying to update my iphone 4(Just got a replacement), I also have firewall off...Hopefully someone can help. Mine says error -3259

  • TS1398 hi, my iphone is not connecting to wifi. there is no problem with the connection of wifi. i tried so much but the connection is not stable. some times it connect and sometimes not connecting at all. if connected also its disconnecting again.pls hel

    hi, my iphone is not connecting to wifi. there is no problem with the connection of wifi. i tried so much but the connection is not stable. some times it connect and sometimes not connecting at all. if connected also its disconnecting again.pls help

    At the very least, I recommend you restart your router, (your internet box).
    More detail on your problem is needed - are you in a submarine? On the moon? On a tropical island?
    You can help yourself by providing as much info as you can about your present situation - what kind of router do you have? Have you moved it? DId you update it?  Did you do anything to change your setup, and if you did, what?

  • Since upgrade to ios6 l have been having problem with wifi connection and connecting to App Store and iTunes store

    Q since upgrade to iOS6 l have been having problem with wifi connection and getting into App Store and itunes

    Saw this on another post.
    Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it!   It's not happening to everyone however but they are looking into it, its really hit or miss.
    In the meantime ...........
    The Complete Guide to Using the iTunes Store
    http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/kb/TS3297
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
    http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
    Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    This works for some users. Not sure why.
    Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
    ~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet
    http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Upgrading to 6.1.1 hasn't solved the problem with network connection on 4S. Still "No Servise"!

    Upgrading to 6.1.1 hasn't solved the problem with network connection on 4S. Still "No Servise"!

    Same here.  Everything was fine running on ios 6.0, I don't know what possessed me to upgrade!  I contacted O2 and thet went through the usual settings; reboot; airplane mode etc and it works for a while (like 5 mins) then service is losted with the network.  I've even deleted the exchange email account and rebooted as read on the internet that this would fix the problem.... guest what....yep no joy!  This is clearly a faulty software update and need fixing pronto!  I've read that ios6.1.2 will be out soon to fix the firmware that was suppose to fix the initial network problem.   When will this be realeased Apple?!  It's hardly fit for purpose when I can't make calls or surf the internet. 

  • Does anyone have problems with hotspot connections or WLAN since they have installed Lion?

    Does anyone have problems with hotspot connections or WLAN since they have installed Lion?

    Same problem for me: Since update to Lion my WLAN connection to my router (AVM fritz!box fon 7141) get's lost almost every time the computer is on idle for a couple of minutes. Deactivating and reactivating helps, but of course only until the problem occurs again.
    BTW: I'm running Mac OS X Lion (10.7.3) on a iMac 27" 3.2 GHz i3 (mid 2010 model).
    I'm really annoyed by this problem and looking forward for APPLES fix.

  • Problem with JCo Connection Pool

    Hi,
    I have a problem with using an RFC Model in my WebApplication. So sometimes the access to the function block works, and sometimes it doesn't work. Now I know, that there is a problem with the connection pool. Look at this message:
    com.sap.mw.jco.JCO$Exception: (106) JCO_ERROR_RESOURCE: Connection pool WD_X24_MODELDATA_DEST_CPIC_REKTO_DE_useDefinedUser is exhausted. The current pool size limit (max connections) is 10 connections.
    So it looks like a problem with closing the JCo Connections after using. Do know where the problem is? Because I'm using many other function blocks with no problems.

    Hello,
    You need to increase the pool size via Visual Administrator.
    Server 0 -> Services -> JCO RFC Connections.
    Change the pool size from there. I believe a restart is in order.
    Regards,
    Jan

  • Problems with ipod connection.

    Problems with ipod connection.
    I have problems to connect my ipod to computer windows 7.
    When I connect I get the following error:
    "We encountered an ipod, but could not be identified correctly. Disconnect and reconnect the ipod and try again."
    And it recognizes the ipod when trying to go play music or videos make me the following error:
    "Error while trying to copy on disk. The device is not connected."
    I've uninstalled all apple applications and re-installing, as I formatted the ipod and continues to set the same error.
    What else can I do?

    Hello,
    While your symptoms don't exactly match the descriotion, this article may be usefull in discovering if there is a setting on your computer that is causing this to happen.
    iPod not recognized in 'My Computer' and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    -Griff W.

  • Exchange Server 2010 SP3 - Rollup 8 - Issue - Problems with client connections - MS Outlook 2013

    Exchange Server 2010 SP3 - Rollup 8 - Issue - Problems with client connections - MS Outlook 2013
    Detected Problems:
    - Access denied for attached mailbox (department mailbox)
    - Access denied for delete or move messages on own mailbox
    - Can't send new messages with error (Error: [0x80004005-00000000-00000000])
    Solution:
    - Rollback to Exchange 2010 SP3 - Rollup 7
    - You can rollback to Exchange 2010 SP3 - RollUp 7 in 30 min
    Algunos de los destinatarios no recibieron su mensaje.
    Asunto:     Hola
    Enviado el: 11/12/2014 8:35
    No se puede localizar a los destinatarios siguientes:
    '[email protected]' en 11/12/2014 8:35
    Este mensaje no se pudo enviar. Inténtelo de nuevo más tarde, o póngase en contacto con el administrador de red. 
    Error: [0x80004005-00000000-00000000].

    See the following forum thread: 
    https://social.technet.microsoft.com/Forums/en-US/1be9b816-b0ab-40ea-a43a-446239f8eae3/outlook-client-issues-following-exchange-2010-rollup-8

  • My station is listed on Itunes Radio stations, but there's a problem with the connection. Does any body help us regarding this issue? The station name is KRAL FM under the Top 40 / Pop category

    My station is listed on Itunes Radio stations, but there's a problem with the connection. Does any body help us regarding this issue? The station name is KRAL FM under the Top 40 / Pop category

    My station is listed on Itunes Radio stations, but there's a problem with the connection. Does any body help us regarding this issue? The station name is KRAL FM under the Top 40 / Pop category

  • I can't make a purchase with iTunes because it says there's a problem with the connection. How do I fix this?

    I can't make a purchase with iTunes because it says there's a problem with the connection. How do I fix this?

    Morning Gjakleinmark,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at this article:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Best of luck,
    Mario

  • Problems with Document Connect

    I have a problem with Document Connect. I am unable access office live workspace.
    I have been on the help line with microsoft but they were unable to help.
    Then I went to an apple store and was informed by one of the sales assistance that Document Connect never worked with the apple. Well what was the point in having it then?

    I wish I knew what Document Connect is. I'd bet I could fix it. Not really, but what is it?

  • I have an Ipad mini with IOS7. A few days ago I began to have problems with wifi connectivity. I can connect to wifi with Google but cannot navigate in Safari nor any of my aps are able to acess wifi. Very strange. Not sure what to do!

    I have an Ipad mini with IOS7. A few days ago I began to have problems with wifi connectivity. I can connect to wifi with Google but cannot navigate in Safari nor any of my aps are able to acess wifi. Very strange. Not sure what to do!

    Hi ..
    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    If that doesn't help, tap Settings > General > Reset > Reset Network Settings
    You may have to re enter your Wi-Fi password.
    If nothing above has helped, try here >  iOS: Troubleshooting Wi-Fi networks and connections

  • There is a problem with this connection's security certificate The remote computer cannot be authenticated due to problems with its security certificate. Security certificate problems might indicate an attempt to fool you or intercept any data you send

    Hi,
    I have this Windows 2008 R2 on which I installed remoteapp some years ago.
    Now the certificate expired and I get the message
    "There is a problem with this connection's security certificate
    The remote computer cannot be authenticated due to problems with its security certificate.
    Security certificate problems might indicate an attempt to fool you or intercept any data you send to the remote computer."
    How should I renew the certificate? I already went to certification store and tried to renew certificate with same key but then it says "the request contains nor certificate template information".
    Please advise.
    J.
    J.
    Jan Hoedt

    Does the computer account have Enroll permission to the certificate template?
    From the Server running your CA, run mmc, click File then Add/Remove Snap-in...
    Add Certificate Templates and click OK.
    Find the certificate template, then right click and select properties.  On my CA its call ed RemoteDesktopComputers but might be called something different depending on what what template your certificate is based on.
    On the security tab, click Oblect types, check Computers then OK. Enter the Computername and click OK.  Then give your computer account Enroll permisssion.
    HTH,
    JB

Maybe you are looking for

  • Can't get my Mac to boot

    Hi. I have a 2011 iMac, i5, originally with 4 Gb of RAM, currently running Mavericks. Today I tried do upgrade the memory with + 4GB. When I turned my mac on after installing the RAM, it worked and recognized the upgrade. Then, a few seconds later Sa

  • VHS To iMovieHD using Song D8 Camcorder, Camera Recognised but No Picture

    Apologies, it's an old topic I know. I read through a number of threads and have a few ideas but wanted to post this as well. I'm trying to setup a friend (87yo) to capture his old VHS tapes to iMovie HD by routing the signal through a Sony Digital8

  • Drivers / update problems on X230T

    1. My UltraNav (Synaptics) TouchPoint and TouchPad work only until I log in to Windows (7 Pro x64).  Telephone support suggested (after I got disconnected 3 times) that I use LSC to reinstall the driver, but I find no way to reinstall drivers in LSC.

  • After burning view on tv is not the same as in project panel

    I captured a old black and white VHS recording, taped from television, in adobe cs5. It looked good in the project. I send it to encore and burned the project to a DVD. When I looked at the DVD on television the black is ok but the white became very

  • FACTOR=USING/TOTAL!!!!

    Hi, I do not understand the meaning of FACTOR=USING/TOTAL in the allocation logic. Can someone explain me this? I tried in forums i could not locate the information. If you feel the information is already available in other threads please direct me t