4.2 OS problem with the lock button

when you switch on the lock button on the side , ipad goes silent :)) and flip function does not lock try and seee :))need an upgrade , am ı late or did the upgrade came??

The screen lock function has moved to the MT bar which you would know if you had looked around here or done a search. There have been many posts on this subject.
Double tap the home key, swipe to the right, and there is your new lock function on the left!

Similar Messages

  • My iphone doesnt want to start.all it shows is the apple icon.nothing more.i have tried holding the home button together with the lock button.what can i do .thanks

    my iphone 4 doesnt want to start . all it shows is the apple icon.i have tried holding the home button together with the lock button. nothing seems to work . please help.

    Plug the iPhone in with the Wall Charger. Then while plugged in do the Reset again, hold both Home and Power buttons until the iPhone Restarts. This usually begins to happen in less than 20 seconds time.
    If you this does not work you can try to Restore the Firmware on your iPhone. If you decide to do this, connect your iPhone to your computer with iTunes open. Hold both the Home and Power buttons until the iPhone is detected by iTunes in Recovery Mode, this takes about 20 seconds time. Restore your iPhone.
    If this does not work, you can try to Restore the Firmware on your iPhone in DFU Mode. Connect your iPhone to your computer with iTunes open. Hold both Home and Power buttons for exactly 10 seconds, release the Power Button and keep holding the Home Button until iTunes recognizes the iPhone in Recovery Mode, about 20 seconds more time. Restore the iPhone.
    If this does not work and you have Warranty or AppleCare Coverage take your iPhone to Apple for resolution of the problem.

  • Is anyone having a problem with the home button on a 6?

    when I first got my iPhone 6, the home button was just like my other iPhones have been, my iPad, my sons iPhone 6, etc. when you pushed it, you can feel it move and you feel a little dull clck. Now the the home button on my iPhone 6 has no movement or click. It still functions, but I'm worried it is on its way to failing and if I wait to address the issue until it completely fails, then it will be out of warranty. Has anyone else experienced any problems with the home button?

    If you believe that your device has a defect or malfunction, contact Apple now.  This forum is not for taking polls.  Contact Apple for support options.

  • Problems with the home button and generally freezing and shutting down often.

    I have had this iPad 2 for around 3 months. After about a month I noticed that I was having to press the home button multiple times in order to get it to respond. It is now at a stage where I have to press it as many as 12-13 times. It's won't do this every time but all day for maybe 3 out of 5 days the other times it works fine.
    As well as this I have also had issues with the Internet shutting down, Skype going crazy, picture albums popping up and then vanishing and so on. I'm not a computer wiz but I would describe it as going crazy two or three times a day.
    While I was in a shopping centre about a week ago I asked about the problems in an apple store. The man was very helpful and asked if I had it on me so he could look at it. Unfortunately I didn't be he said I could bring it back whenever I like and it would take around 30 mins for someone to check it out. He said most Likley they would just give me a new one and that would be that. So of course happy that it could be sorted I went home. Today I decided to drive the nearly two hours down to Brisbane after having a nightmare time trying to Skype my friend this morrning. I hot to the store and asked if it could be looked at only to be told I need an appointment. I showed the card that I had been given and explained what I had being told. To cut a long story short he agreed that I had been told that but said the assistant clearly didn't know what he was on about and that I should come back. I offered to wait but dispute the shop being more full of staff watching movies and downloading songs then actual customers I was basically denied any sort of help and told to call the office to arrange an appointment.
    Sorry to rant! I just thought that apple were renowned for good service? 5 hours later I'm home with the same issues.
    If anyone has had similar problem with the device or even customer service I would be intrested.
    Regards,

    Me too!  I had many bugs and returned my phone for a brand new one that did this the first time it was turned on at the Apple store.  I was told it is a "software issue" and to "reboot the phone" if it continued to happen.  It happens almost every time I try to use my phone.  I've rebooted three times in a row some days.  Nothing really seems to help.  I keep waiting for an update.

  • How can I turn my phone back on after shutting it off with the lock button not working?

    The lock button on my phone wont work, now, I have the AssistiveTouch on to lock and shut off the phone, however, how would I turn it back on afterwards? Could I just use the home button? I don't want to test it and end up with a shut off phone that cannot be turned on again...

    Thank you.  I need some kind of options, so this helps out a bit.

  • Problem with the back button in the Alv ouput

    i have  refresh button in output of my alv report when i click on this it is getting refreshed ,now the problem is with the back button after refresh whn i click on back button it is not going to selection screen , i have to  click  the back button thrice  to come out to the selection screen ,if have refreshed  the ouput  screen twice .
    if i dont refresh the back button is working fine , So i have used "call to selection screen 1000" it coming  to selection screen without any problem  but in selection screen on clicking on back button it is again going back to output screen ,So please suggest what has to be done here .

    Hi Brahmananda,
    Please try to understand the flow of program and the screen navigation
    the click of BACK button triggers PAI and (to the best of my knowledge) you might have called the ALV screen number without any checks ( may be) so it is again taking to the ALV.
    try using
    in PAI
    module exit at exit-command
    in program
    module exit
    case ok_code
    when 'BACK'.
    LEAVE PROGRAM ( or any thing that you want it to be )
    endcase
    endmodule
    regards
    Ramchander rao.K

  • HT1766 anyone having problems with the start button

    Is anyone having problems with the Iphone 4 start button not working

    What is the start button?
    Do you mean the on/off button, or the Home button?
    If either one is not working at all, more than likely there is a hardware problem.

  • What's up with the lock button on my iPhone 5! Sometimes it works, mostly it doesn't.

    The lock button on my phone doesn't really work.

    i am having the same problem
    i set up an appointment at the apple store for tomorrow at 11am
    my friend had the same problem and they replaced his phone as soon as they saw the button wasn't working every single time it was pushed.

  • Is anyone else having problems with the power button?

    Someone at work also said they were having a problem with their power button not working? Is it hardware or maybe software?

    I had the same problem with my new macbook air. It was scratchy and annoying so I updated the speaker's software and now it's perfect.
    http://worldwide.bose.com/downloads/en/web/bose_bluetooth_speaker_download/page. html
    hope it solves your problem too.

  • Why? Why does it do this? Why? (problem with the lock thing)

    I always lock my ipod mini and then put it in my bag while I'm using it, but as soon as it touches something in my bag it pauses. Should it pause with the lock on? It's really annoying as I have to unlock it to unpause it, and then it just pauses itself again. Grrrr.

    If you are using an third-party headphone set, or your headphone minijack connection is slightly loose, then every time it moves, the iPod senses that and pauses the music.
    It is a 'feature' to stop the music playback should you remove the headphones from the iPod. It can be a bit sensitive given the 'wrong' conditions.
    No way to turn off this feature, so you'll need to experiment with keeping the jack from being jostled.

  • I have heard that the iphone 5 has hardware issues with the lock button and sometimes the power button...is this a recurring problem or is it easily fixable?

    Is this problem affecting most users? I heard that it usually takes abotu 2-3 weeks after getting a replacement that these problems might occur and I don't wanna shell out a lot of money only to have to constantly go to the apple store and get a new replacement regardless if it is free.

    I currently have a defective lock/sleep button on my iPhone 5. After putting up with it for 3 weeks, I took it to an apple store. The "genius" told me that because I'm 50 days over my year warranty, I would have to pay $280 to get a replacement. They will not fix the problem. They can only give you a refurbished phone. BEWARE: the replacement is only free if the phone is still within the one year warranty or if you have an extended apple care. I'm still blown away on the fact that I payed $500 for a product that defected in a little over a year and be told by a condescending apple genius that I have to pay $280 to resolve the problem. My friends who have Samsungs and HTCs have 2 year old phones that work as well as the day they bought them. I had a blackberry for almost 3 years and had no issues at all, but a highly advanced, "well made" apple product barely lasted a year. My wife's iPhone 4S shuts off when the battery drops to 30%. And of course the guys at the Genius Bar say they can't help. I shouldn't have to pay for a replacement unless I did the damage myself. I've been an iPhone user since the first iPhone. And every year, I've had something break right after the warranty expires (failed audio jack on iPhone 1, failed earphone on iPhone 3G, failed home button on iPhone 4). It's getting really old spending a lot of money on cheap products and having to deal with the "better-than-you" swagger from the Genius Bar.

  • Has anyone had a problem with the menu button

    recently my menu button on my i-pod touch is acting weird, i have to press it a couple of times for it to work or in a certan spot. does anyone else have the same problem? Last night it wasn't working at all but it has gotten better but i still need to press it like 3 or 4 times for it to work.
    Message was edited by: crzypunk2004
    Message was edited by: crzypunk2004

    I think they mean the home button. Have you dropped your iPod or possibly have gotten crumbs/sand or something small into the button? This happened with my friend's iPod nano last year. She went to the beach and got sand stuck in the center button and now she has to press that button 4 or 5 times to get it to work. Unfortunatley I don't know how to fix this, but I hope this helped a little bit.
    Good luck!

  • Problems with the "INSERT" button.

    Hi,
    I have a problem in my homework. I am required to do the following:
    'original numbers' array contains zeros. Let LabVIEW fill an array "original numbers" by random integers from 10 to 90 at a rate 1 number/0.5 seconds by replacing each zero at a time from top to bottom. (DONE)
    user fills in 10numbers in an array 'numbers to be probably inserted'. Then the user decides if he needs to change a generated number that he doesn't like by changing the 'Insert' array.
    Then he presses the INSERT button and a resulting array would appear containing the elements the user changed......
    This video might clarify:
    http://www.youtube.com/watch?v=dDXo2ABqNM4
    The problem I am facing is the INSERT button. In the video, the moment it is switched the program will continue to the last part.
    I am attaching the vi. I think there are no logical mistakes in the program except the INSERT case structure.
    Thank You.
    P.S. The version is LabView2010 ; I'm getting error trying to save to previous versions sorry.
    Solved!
    Go to Solution.
    Attachments:
    INSERT.vi ‏18 KB

    A.A.A. wrote:
    What does it mean to disable auto-indexing?
    I didn't understand why we used the reshape array palette. What are the dimensions of the input and the output? Very nice way how you made a length 10 zero array. (i'll use that when i figure the solution of the dimension problem.)
    Did you use the 100ms wait in order not to affect computer performance or for other reason?
    How where you able to connect the 'changed numbers' array to Not Equal Palette?
    From where did you get the "replace" button? I think my "insert" button does the oppositeof what it should do.
    Your code sitll has major flaws. Your questions are very basic and I recommend to do a few tutorials.
    If you wire an array across a loop boundary, the tunnel can have two modes (plain (solid square) or autoindexing (contains a small set of square brackets)). In your case, you are autoidenxing the 1D array, creating a 2D array (double-line) at the output of the first loop. You are generating 10x too much data! (create an 10x10 indicator on the 2D array to see what you are actually doing!). You can right-click a tunnel to switch between indexing modes. A plain tunnel transports the array data unchanged. An autoindexing output tunnel, creates an array with a higher dimension, in your case a 2D array from a 1D array with one new row per iteration. If you autoiindex a scalar, you get a 1D array with one element per iteration. An autoidexing input tunnel does the reverse. If you wire a 1D array to a FOR loop using autoindexing, you get a scalar per iteration and the FOR loop will stop once the array runs out of elements. Is it equavalent (with some important differences) to wiring without autoidenxing, then using "index array" with the index wired to [i] as you currently do. In your case, you chould get the 1D array from the shift register of the first loop, it has all the information(!), and disable autoidexing at the boundary of the second loop and the outcome would be the same, except you use only 10% of the memory.
    Once you are autoidexing at a loop boundary, a FOR loop iteration count will be determined by the size of the smallest autoindexing array. This would be a problem if you later want to change the code to operate on e.g. 20 elements, because the other two arrays in my code would force the loop to stop after 10 iterations. "Resize array" can be used for padding/trimming arrays and in this case we are forcing them to be the lenght on the main array to ensure that the FOR loop does not stop prematurely. In your case, the replace and switch arrays are empty by default, so the loop would not spin at all unless you would enter some values. "resize array" brings them up to size.
    Yes, you need a small wait either inside the other case or elsewhere in the while loop. Without a wait, the basically empty loop will spin millions of times per second, consuming all CPU in the process while doing nothing. No human can click a button with that kind of time resolution, so a 100ms wait is not noticeable, but will drop the CPU use to negligible levels. Your computer has dozens of processes running at any given time. Imagine how well it would work if all programs would consume all CPU they can possibly get?
    I am comparing two arrays, and the output will be a boolean array. You are only comparing two scalars and you won't get an array. You also don't need the "AND", because if the values are different it has to be true anyway. In your case you would need to carry a boolean array similar to the number array, replacing elements as you go.
    A button is a button is a button. There should be no difference. You can change the label, boolean text, default value, and mechanical action to match your requirements.
    A.A.A. wrote:
    I have done so to initialize the arrays full of zeros yet the way you did it way easier.  How did u initialize them to zeros?(from where did you get the palettes? I have attached a picture clarifing my question.
    These are local variables. You don't need to find them in the palettes. Simply right-click a terminal and "create local variable". Voila!
    (Local variables can be used to read from an indicator or write to a control. However, because they break dataflow, you can generate dangerous race conditions. They also force extra data copies in memory. Don't use them like "variables" in text based code. Except for initialization and user interface interactions, they should be used sparingly and are rarely needed. In principle, my code has a theoretical race condition because the order of operations is not determined between the three independent code sections. For example if the initializion would happen after the second loop executes, you would get an unexpected result. It will never happen in this particular case, but in other scenarios it could be a problem.)
    LabVIEW Champion . Do more with less code and in less time .

  • A problem with the hold button

    I have had a fully functional ipod Nano 3g since I bought it. The other day the hold button did something weird. It usually clicks left or right easilly. It clicks right or in "hold" position now, but I have to push hard to slide it about 3/4 to the left or "unlock" side. It can be held or unheld but i was just getting annoyed with pushing hard. Please help

    me too i have the same problem but no one answer

  • Problem with the sleep button

    Hello, my iphone only works when its plugged into the my computer. The instant I unplug it the screen goes black and flashes the apple logo for about 5 seconds on and off nonstop. It did this for the whole night and the battery was almost drained when I plugged it in the next morning after being fully charged. I believe the problem is with my sleep button, I think the phone thinks the button is pressed in all the time, but I can't be sure. The button still feels just fine, but I can't think of any reason why it would suddenly do this, I haven't downloaded anything onto it for weeks now, and I haven't ever dropped it. Any help on how to fix this would be greatly appreciated.

    Call 1800-MY-IPHONE and they can send you a box (free) to send it back to them (free) and if it is covered they will replace for free and send back. If you have an old phone around that accepts SIM cards you can use your SIM from your iPhone (they will tell you to take it out) in your old phone while your iPhone is out to them. Then put back in when you get phone back.

Maybe you are looking for