4:3 Templates in a 16:9 project

I'd like to use the brush strokes templates in DVDSP4 and Motion 3, but my content is 16:9 and I cannot appear to alter the aspect ration once the template is selected.
Is there a way around this - for instance are there 16:9 versions of the templates somewhere?
Thanks for any help.

Open the Clip Inspector to the Rotate, Crop, Ken Burns Tab and select FIT.

Similar Messages

[svn] 3120: When you point Flex Builder at a local sandbox trunk build, it couldn' t generate the html-templates folder correctly for new projects so we moved all the html templates up one level and removed the html-templates directory and adjusted build

Revision: 3120
Author: [email protected]
Date: 2008-09-05 10:44:10 -0700 (Fri, 05 Sep 2008)
Log Message:
When you point Flex Builder at a local sandbox trunk build, it couldn't generate the html-templates folder correctly for new projects so we moved all the html templates up one level and removed the html-templates directory and adjusted build.xml's to accommodate the directory change
Modified Paths:
flex/sdk/trunk/build.xml
flex/sdk/trunk/webapps/webtier/build.xml
Added Paths:
flex/sdk/trunk/templates/client-side-detection/
flex/sdk/trunk/templates/client-side-detection/AC_OETags.js
flex/sdk/trunk/templates/client-side-detection/index.template.html
flex/sdk/trunk/templates/client-side-detection-with-history/
flex/sdk/trunk/templates/client-side-detection-with-history/AC_OETags.js
flex/sdk/trunk/templates/client-side-detection-with-history/history/
flex/sdk/trunk/templates/client-side-detection-with-history/history/history.css
flex/sdk/trunk/templates/client-side-detection-with-history/history/history.js
flex/sdk/trunk/templates/client-side-detection-with-history/history/historyFrame.html
flex/sdk/trunk/templates/client-side-detection-with-history/index.template.html
flex/sdk/trunk/templates/express-installation/
flex/sdk/trunk/templates/express-installation/AC_OETags.js
flex/sdk/trunk/templates/express-installation/index.template.html
flex/sdk/trunk/templates/express-installation/playerProductInstall.swf
flex/sdk/trunk/templates/express-installation-with-history/
flex/sdk/trunk/templates/express-installation-with-history/AC_OETags.js
flex/sdk/trunk/templates/express-installation-with-history/history/
flex/sdk/trunk/templates/express-installation-with-history/history/history.css
flex/sdk/trunk/templates/express-installation-with-history/history/history.js
flex/sdk/trunk/templates/express-installation-with-history/history/historyFrame.html
flex/sdk/trunk/templates/express-installation-with-history/index.template.html
flex/sdk/trunk/templates/express-installation-with-history/playerProductInstall.swf
flex/sdk/trunk/templates/metadata/
flex/sdk/trunk/templates/metadata/AC_OETags.js
flex/sdk/trunk/templates/metadata/readme.txt
flex/sdk/trunk/templates/no-player-detection/
flex/sdk/trunk/templates/no-player-detection/AC_OETags.js
flex/sdk/trunk/templates/no-player-detection/index.template.html
flex/sdk/trunk/templates/no-player-detection-with-history/
flex/sdk/trunk/templates/no-player-detection-with-history/AC_OETags.js
flex/sdk/trunk/templates/no-player-detection-with-history/history/
flex/sdk/trunk/templates/no-player-detection-with-history/history/history.css
flex/sdk/trunk/templates/no-player-detection-with-history/history/history.js
flex/sdk/trunk/templates/no-player-detection-with-history/history/historyFrame.html
flex/sdk/trunk/templates/no-player-detection-with-history/index.template.html
Removed Paths:
flex/sdk/trunk/templates/html-templates/

Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

Template does not appear in project folder

Hi
My template has disappeared from my project. Therefore, I
have tried reimporting the template to the 'Templates' folder in
the project folder. When I do this, I do not get an error message.
But the *.htt file does not appear in the 'Templates' folder and I
cannot attach it to help texts?? When I open my file manager I can,
however, see that the *.htt file is indeed placed in the current
project. Can anybody help?
Thanks
Lena

Yep! These forums are littered with problems caused by
working over a network. RH is essentially an Access DB and this has
well documented problems with networks. Work off your hard drive
and back up to your network each night. That's works for me. Try
importing your template once you've copied your project to your PC
and come back if you still have problems. You may have to recreate
your template as it is not impossible that the .HTT file has become
corrupted.

*** HD-DVD template for regular widescreen DVD project?

I have a sample of HDV projects that I have converted to .m2v in DVDSP in order to show on DVD. For now, I have to use a DVDSP template as the background menu. I'm not happy with how the menu looks on my widescreen LCD tv so I'm wondering if it's possible to use one of the HD-DVD menu backgrounds even though the video content of m project is .m2v. Will this make the menu screen look better or will the DVD have problems loading in a regular DVD player?
Thanks in advance!

The HD content is a different physical size and I would think that if DVDSP lets you import it as an asset, then it will certainly re-scale it for you to be a legal SD size.
You might be better doing this yourself and controlling the re-scaling more precisely... otherwise things could get ugly!

Missing "Save Site as Template" For Publishing Sites in Project online 2013

First I created Sub site using Project Template under the site collection.
Now I want to this Sub site Save as a Site Template. When I went for Save site as Template in site setting. Under Site Action there is no option for “Save site as Template”
marylu

"Publishing Feature" may be enabled at your site , The Publishing feature does not support the Save Site as Template option.
http://support.microsoft.com/kb/2492356
Some workaround -
http://www.learningsharepoint.com/2013/05/03/missing-save-site-as-template-for-publishing-sites-in-sharepoint-2013/
http://blogs.msdn.com/b/how24/archive/2013/06/13/save-publishing-site-as-a-template.aspx
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

Create template for a task in Project Server 2013

Hi everyone,
I've got a little question, yes, again :-)
Some user of Project Server haven't scheduled tasks, so they need to create their tasks by the "My Tasks" page, "Add a row" then "Add a new task".
Unfortunatly, these users create a lot of little tasks but which are the same excepted for an information (like number of the bug ticket) and my bosses want to create a template of a task for create this kind of tasks very quickly but I do not find a way to
do that.
Is it possible with Project Server to do something like this ?
Thanks to you,
Patmol

Patmol6 --
There is no default functionality in Project Server 2013 that would allow a team member to create a new task from some kind of custom template. It MIGHT be possible through custom software development, however. Hope this helps.
Dale A. Howard [MVP]

Git CI/CD w/ Default Build Process Template does not build all Projects in Solution?

Good evening,
I have a VSO hosted git based project that hosts a Azure Cloud Service, particularly one VS solution (.sln) that contains the Azure Cloud Service project (.ccproj), the Web Role .csproj, some auxiliary projects (again .csproj) and one (MS)Test project (again
.csproj). All these .csproj are enabled to be build in both Release and Debug configs (everything's Any CPU).
Now inside Azure I did link the corresponding Azure Cloud Service to that VSO project, Azure/Vso did prepare the _CI (or was it _CD?) build definition with the
GitContinuousDeploymentTemplate12.xaml selected and in general deployment works perfectly fine
BUT
.. but the problem is that I really don't know how to solve after hours of fiddling - the *.Tests is not built and therefore no tests are fond and run.. and I wonder why. More precisely, none of the projects that are not referenced by the Cloud Service's Web
Role (it's the only role atm for the CS) are actually built.
Not sure whether this is a Cloud Service build thing or one of the Git Build Template, but how and where can I make sure all projects inside the selected .sln (see screenshot) ARE actually built as defined in the selected/defined Solution config? What's going
on here?
Thanks,
-Jörg
Here's my local view in combination with the build / process definition. As you can see the .tests.dll IS built as part of Release & AnyCpu for the .sln, but when running the build on VSO (& downloading the drop folder), it is NOT included/built..
looking at the logs also reveals that the *.tests.csproj is NOT built.

Good Morning!
thanks for the reply but unfortunately I cannot reference the Test Project from the CS Web Role as this is the very same project the Test Project actually contains tests for and circular dependencies (Test > Web Role Project and > back to the Test
Project is not possible).
The logs themselves just reflect the observed behaviour: they do not mention or contain the .Tests.csproj at all (or the other projects not referenced directly by the Web Role) and even though the selected solution does contain these projects, strangely
the first few lines in the msbuild log are:
Build started 1/7/2015 12:03:49 AM.Project "C:\a\src\Sources\Backend\Backend.sln" on node 1 (MyProject_Backend:Publish target(s)).
ValidateSolutionConfiguration:
Building solution configuration "Release|Any CPU".
Project "C:\a\src\Sources\Backend\Backend.sln" (1) is building "C:\a\src\Sources\Backend\MyProject.Backend\MyProject.Backend.ccproj" (2) on node 1 (Publish target(s)).
..so why is it only or specifically picking up the Azure Cloud Service .ccproj / project as the only buildable target & why not what's specified in the Solution? What's the whole point of tests if they are for some odd reason dropped?
Strangely enough, this only appears to be happening with the GIT template - I had this project originally in TFVC and did the same thing - linked from Azure to that TFVC project (same solution) and with that particular build template it
did build & run the tests.
Any ideas / suggestions or if you need any more specifics, please let me know.
Thanks!
-Jörg

Use a sequence template multiple times in same project

I have created a lower-third animated title and saved it as a sequence as it has sound. What I'm confused about it how I import that sequence and use it multiple times in the same project and change the content of the title for each sequence. If I import the sequence and change the title in one instance, it changes the title of all instances. I would like to use the sequence and be able to change each title. I have even tried copying sequences and renaming them but any editing still seems to affect the parent sequence file.
I know this must be really simple but I'm going round in circles here. Any pointers appreciated.

Take a look at this thread:
style sheets for titles?
I'm not sure if an AFX Live text will bring over the audio, it is not something I have tried.

How to use myself JSP template for my projects

I am using JDev 10. .I realized the default templates of JSP in JDev don't match with my projects so I want to create my own template for JSP Pages. I read some threads in Forum about this problem but I am a beginner, I cannot understand fully and don't know the way to create template nor adding it into Project. Someone can tell me where I can find the tutorials, examples(demo).
Thank you very much.

Hi,
The Bex report uses the Standard Template 0ANALYSIS_PATTERN while it is executed.
So if your sure that the look and feel of all the Reports is going to remain same, you don't need to even attach all these Queries to Templates in WAD.
When you execute the BEx query, it would pick up the standard template and run it in portal.
But if you want to customize the Report Template:
1) You can change this standard template 0ANALYSIS_PATTERN and customize it according to ur requrement in WAD.
2) Or you can create a copy of this standard template and change it as required. Then change the template in spro (transaction RSCUSTV27) to point to this Z template.
Let me know if you need more details.
Regards,
Forum

Is there a way to create a Cairngorm "template" Project?

Would it be possible to create a template for Cairngorm-based Flex projects, since they all have the same general architecture?:
/src
/control/events
/control/commands
/control/Controller.as
/control/Services.mxml
/model/ModelLocator.as
/valueObjects
/view
I basically want to create this folder/file structure, and then start a new project in Flex Builder using this template. I know I can simply copy and paste the structure from a random folder, but I was wondering if there is any way to do this in Flex Builder.
Thanks.

FYI, when I try "Import... > General/File System", it only imports folders with files in them (it ignores /control/events, /control/commands, /view, and /valueObjects).
On Wed, Dec 24, 2008 at 10:05 AM, Eric Belair
<
[email protected]> wrote:
A new discussion was started by Eric Belair in
Cairngorm Development --
  Is there a way to create a Cairngorm "template" Project?
Would it be possible to create a template for Cairngorm-based Flex projects, since they all have the same general architecture?:
/src
    /control/events
    /control/commands
    /control/Controller.as
    /control/Services.mxml
    /model/ModelLocator.as
    /valueObjects
    /view
I basically want to create this folder/file structure, and then start a new project in Flex Builder using this template. I know I can simply copy and paste the structure from a random folder, but I was wondering if there is any way to do this in Flex Builder.
Thanks.

How do I apply a Design Template to an existing project, and...?

I made some customizations to one of the design templates and saved those changes. I want to have these changes applied to existing and new projects, how do I get this to happen? Also when making the customizations to the design template, I seem to be able to only make certain changes. For Example: The first item is a TEB - I am able to change the success and failure caption boxes but only in regard to style, I can't seem to change the text. It reads "Type success text here." I want that to always read "Correct!" so how can I implement this without have to change the text for each item in the project?
Thanks for your time!
Tami

Hi there
btjra wrote:
I made some customizations to one of the design templates and saved those changes. I want to have these changes applied to existing and new projects, how do I get this to happen?
After you create your design template, you apply it by opening a project that you wish to apply the template to. Then you click the Window menu and choose Design Template.
This opens the Design Template panel. From there you choose a template to apply to your project.
btjra wrote:
Also when making the customizations to the design template, I seem to be able to only make certain changes. For Example: The first item is a TEB - I am able to change the success and failure caption boxes but only in regard to style, I can't seem to change the text.
Indeed you may only apply the visual characteristics. The text is influenced by editing the object later in the project.
btjra wrote:
I want that to always read "Correct!" so how can I implement this without have to change the text for each item in the project?
Thanks for your time!
Tami
I don't think you will be able to influence this. Not with a Design Template. What you can do is create a Project Template with the captions pre-configured. Then you could copy and paste as needed to accomplish it.
You should add your voice to others that wish to see more flexibility with configuring defaults such as what you are asking. You do this via the Wish Form.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Captivate 6 - Updating template does not update project

Hi ,
I am just learning Captivate 6 and have started by creating a theme and then a template. If I create a project file using the template and then go back and make a change to a graphic in the template should it automatically update the project file or do I have to apply the template to the project file again some how? Currently if I make a change to the template it does not update the project file.
Thanks,
Richard

Hi there
Have you ever inserted a document into a copier and made a copy?
If so, this is really the way Captivate templates work. They are designed so you have a consistent look and feel to projects you create from them. So returning back to the copier analogy, once a copy has been made, any changes to the original are NOT reflected in the copy created from the original. But future copies WILL have the changes as the copies were made from the altered original.
Likewise, any changes to the Captivate template are only reflected in the Template as well as Future projects you create using the template. Once created, there is no longer any association with the template.
Cheers... Rick

Project 2007 (with server) - Visual reports custom templates export problem

Hi,
someone fimiliar with this situation?
While creating
and saving a new template in visual report using Project Professional 2007, some of the reports that was saved as template lose connection between Project cube and Excel.
Those reports include Enterprise global custom fields, and on the first few times I open them (on different computers) it works fine but later some of the report
templates won’t open, and error messages are received.
Those are the steps I did to reproduce the problem:
When I create the template I used “New template” and then I added the fields (some of the templates are “Task usage” based, and some “Task summary” based).
Then when I try to open it later…
Step 1 –Open the template
Step 2 – the export gets stuck –
Step 3 – if I check the excel that was opened I get error messages -
Step 4 – another error message (after clicking OK on the previous one)
When clicking OK or Cancel the excel is closed
Step 5 – when going back to check visual reports on project another error appears
Ofir Marco , MCTS P.Z. Projects

Easily fixed. Just take the Excel.exe file and copy/paste from your Program
Files/Microsoft Office/Office14 folder to the Office12 folder.
As near as I can tell, Project is looking for the file in Office12.
I think you also need to restart Project after doing so.
-A
Andrew Lavinsky [MVP] Twitter: @alavinsky Blog: http://blogs.catapultsystems.com/epm

Project and Checklist templates - Copy

Hi,
We are on PPM5.0.
Is it possible to copy project and/or checklist templates from one client/system to another? We are not carrying out any client or system copy.
We have a significant number of projects and checklist templates in a training client. These templates are now required to be created in the Quality client (another system). Creating them all over again would be a big effort and we are looking at ways (direct or indirect) of copying the existing templates into the new client/system.
Please advise.
Thanks.

Hi Deepak,
Have you considered exporting to MS Project and Importing into QA client? Disadvantages are you will need to do this for each project and when importing you will have first import (as a simulation) into an operational project and then create a template out of the operational project.
PPM5.0 also has a data import utility (tcode DPR_DX_PROJECT), however, exporting the data into a spreadsheet may be a challenge.
Regards,
Lashan

How to compare between two versions of template project???

Dear All,
We are doing some cleanup activity in our solution manager system. For this actually we have created the replica of this project from production system to a sandbox system. We can do the cleanup of this project and can transport this new project to our production system and can move on.
But the pbm we are facing now is, how do we bring in the data captured or added to the production system after we have copied it to the sandbox system?
Can anybody throw in some light into this issue?
We tried the option of creating different version for the template and using the sa_project_upgrade transaction to compare between two versions of the template using "Current Version in Project" option. Not sure whether this will work out.
{{We thought that if we try in this way, we can find the difference between the two versions of the template project, and from there, might be we can bring in the new changes into our new project manually. We do agree that this is not the right approach.}}
But the end result we got was like we got the information regarding where all there is the difference between the current version in the template project to that of the original(in our case it checked against BPR as we selected the scenarios from BPR for this template). But what we expected was a difference between two versions of the template.
Pls help. Pls make a try to help. Any thoughts in this direction will help us to move forward.
Any info will be suitably rewarded.
best regards,
Krishna.

Hi Andreas,
Thanks a lot for your immediate reply.
I too had that doubt that my appraoch will not work. But wanted to get confirmation that it will not work. Also wanted to know about any other approach. Thank you for providing me with some alternative approach.
I tried the option suggested by you. But while running the comparison report for the newly copied project with the option "New Version of Original", I am getting the below error. I do agree that this approach should work. But for some reason I am getting the below error. Can you pls look into the same and help me out.
Internal error
Message no. AI_COMPARE006
Diagnosis
An unexpected error has occurred in:
           program CL_SA_PROJECT_UPGRADE_ONLINE==CP
           include CL_SA_PROJECT_UPGRADE_ONLINE==CM002
           line                                                  102
Procedure
Restart the transaction. If the problem persists, check if a SAP note is existing for this problem. If not please send a message to the SAP hotline.
Thanks a lot in advance.
best regards,
Krishna.

4:3 Templates in a 16:9 project

Similar Messages

Maybe you are looking for