4.3 Upgrade - 3G No Longer Working

I have an iphone4 and it was running 4.2.1 without problem. Yesterday i decided to upgrade to 4.3 because I wanted to take advantage of the new personal hotspot feature.
Anyway - no problems during uograde, except now my 3G does not work. I am not in the US, and my network Tigo runs both Edge and 3G. Iphone has been pretty good before - when the 3G signal is weak itll revert to Edge where possible.
Now Im stuck on Edge, and havent seen it work on 3G since the upgrade. Any ideas/help?

Does apple read this board? I see others are having a similar issue in another thread - what to do? Contact Apple?

Similar Messages

After upgrade Script No Longer Works

After I upgraded CS4 to .605 my script no longer works. I get:
Error Number:45
Error String: Object is Invalid
Line 12
Source: myParStyle.baselineshift = -1;
Here are my first 12 lines:
var doc = app.documents[0]
var color = doc.colors.item("C=100 M=65 Y=0 K=0");
var inlines = doc.stories.everyItem().textFrames.everyItem().getElements();
for(var i=0;i<inlines.length;i++){
    if (inlines[i] instanceof Group){continue}
    if(inlines[i].fillColor != color){continue}
    if(inlines[i].contents == ""){continue}
    inlines[i].convertShape(ConvertShapeOptions.CONVERT_TO_RECTANGLE);
    myChangeCorners(inlines[i], 0, .3, "fourth point");
var myParStyle = doc.paragraphStyles.item("Tab_HeadB_KO");
myParStyle.baselineShift = -1;
What do I need to change to get this to work again?
Thanks,
Rob

So it's still somewhat a mystery, because that particular command didn't change from CS4 to CS5.
Can you try the 'fix' mentioned here? CS5 issues

After a memory upgrade programme no longer working

Mac Mini as server running OS 10.5.8.
I just put in 1 GB of new memory in my server (Mac Mini) so now it has two modules one 256 and one 1GB. Nothing else changed.
Since doing that Ovolab Phlink (is my ‘answering machine’ programme) stopped working. It sees that a call is coming in and recognises the number but does not answer. On manual answering it plays the message to the caller but the phone keeps ringing. It also does no longer send a recording of the call per email.
I am not expecting anybody here to be familiar with Ovolab Phlink but wonder if anybody has a clue as to what could have happened that it was working fine immediately before and not working immediately after (all other programmes seem to be fine). Could it have to do with the internal battery having been disconnected? Or?

macbig wrote:
Could be the RAM. Apple recommends installing in matched pairs.
I do not think so! RAM is fine, and we have several MINI' with not matching RAM pairs. it will effect speed of some Applications, like with a video etc. but not the normal operating of the machine. Also as stated all other Applications run fine.
anybody any thoughts?

After their recent upgrade Facebook no longer works for Firefox version 2.0.0.20, what is the most recent version of Firefox that will function with a Mac G3 running OS 10.3.9?

Facebook (FB) recently restructured their website. After logging on to my FB homepage, some of the graphics are garbled and I am no longer able to post status updates, comment on friend's status updates or pictures, or post pictures using Firefox version 2.0.0.20. I would like to know if there is a newer version of Firefox that will function with a Mac G3 Blue and White desktop running OS 10.3.9 which will be compatible with the new FB? I would upgrade my computer, but have 22+ years of business and tax records that will not function with the newer Mac OS.

Other browsers that you can look at:
* Camino: http://caminobrowser.org/download/releases/
* [http://en.wikipedia.org/wiki/ICab iCab]: http://www.icab.de/dl.php
* SeaMonkey: http://www.seamonkey-project.org/releases/seamonkey1.1.19

After upgrade resin no longer works with Apache!BIG ISSUE

Hi Af!
After the huge update - i ran into some big issue's !!!
Normaly i have apache,php and resin running. but now with the "new" apache - it can no longer accept resin's mod_caucho.so?
Running apachectl -t gives an error:
configerror at line 428 - mod_caucho.so cannot load the module - its proberly been garbled - perhaps this is not a reguar apache DSO module.
(this is not the correct error - but close - i've shut it down - becaurse people are able to se the code)
Normally this have worked fine - Apache is accepting the mod.so and have compiled resin from the button after - just for trying!
Have anybody got an idea about this!
thanks
Peque

Well - here's an update !
Now I have tried to get the old version of Apache - but still that doesen't help me.
After a total install(clean - 0.7.2 ) i do a pacman -Syu to get the final steps uptodate!! Afterwards i do
pacman -U apache.2.0.55
installing that (missing expat) so installing that to!
Afterwards I'm trying to install Resin - and get the error its a bad apxs! so go back to the old configuration is out of the question!
So what have been going so wrong that I'm not able to have a running Apache server along with Resin to handle my jsp pages!
I know others use tomcat - but I have never tried this - and loves Resin! Does anybody have an answer for this part!!!!!
Please help ! I have a quite a lot of pages that are not online at this point!
Peque

Windows 10 Upgrade, Touchpad no longer works on laptop

I upgraded my HP Mini 110 from Windows 7 Starter to Winows 10. It runs fairly smooth but my BIGGEST complaint is that my touchpad no longer responds to taps and scrolling. I used it for just about everything and now I have to use the Left or Right buttons to navigate. FRUSTRATING!!Are there any updates, drivers, patches or Mr FixIt for this? Thanks! -Armando

How did you manage to upgrade to Win 10? I am told graphics will not support it. When I try and update graphics driver I get a failure saying a sub key is not found! Did you have problems with graphics compatability? Regards

[SOLVED]Upgraded plexmediaserver no longer working

I've been using plexmediaserver from the AUR. I installed the latest release which is now plex-media-server but it's not starting. I'm still learning the ropes so have no idea where to being looking now..
[root@hostname ~]# systemctl status plexmediaserver
● plexmediaserver.service - Plex Media Server
Loaded: loaded (/usr/lib/systemd/system/plexmediaserver.service; enabled)
Active: failed (Result: start-limit) since Fri 2014-11-28 09:26:59 GMT; 15s ago
Process: 477 ExecStart=/usr/bin/plexmediaserver.sh (code=dumped, signal=ABRT)
Main PID: 477 (code=dumped, signal=ABRT)
Nov 28 09:26:53 hostname systemd[1]: Unit plexmediaserver.service entered failed state.
Nov 28 09:26:53 hostname systemd[1]: plexmediaserver.service failed.
Nov 28 09:26:59 hostname systemd[1]: plexmediaserver.service holdoff time over, scheduling restart.
Nov 28 09:26:59 hostname systemd[1]: Stopping Plex Media Server...
Nov 28 09:26:59 hostname systemd[1]: Starting Plex Media Server...
Nov 28 09:26:59 hostname systemd[1]: start request repeated too quickly for plexmediaserver.service
Nov 28 09:26:59 hostname systemd[1]: Failed to start Plex Media Server.
Nov 28 09:26:59 hostname systemd[1]: Unit plexmediaserver.service entered failed state.
Nov 28 09:26:59 hostname systemd[1]: plexmediaserver.service failed.
https://aur.archlinux.org/packages/plex-media-server/
*Edit*
Nevermind, ended up removing and reinstalling. Started straight away. Sadly lost all my config so now having to redownload all my media meta data.
Last edited by Swarfega (2014-11-28 11:10:39)

I've been using plexmediaserver from the AUR. I installed the latest release which is now plex-media-server but it's not starting. I'm still learning the ropes so have no idea where to being looking now..
[root@hostname ~]# systemctl status plexmediaserver
● plexmediaserver.service - Plex Media Server
Loaded: loaded (/usr/lib/systemd/system/plexmediaserver.service; enabled)
Active: failed (Result: start-limit) since Fri 2014-11-28 09:26:59 GMT; 15s ago
Process: 477 ExecStart=/usr/bin/plexmediaserver.sh (code=dumped, signal=ABRT)
Main PID: 477 (code=dumped, signal=ABRT)
Nov 28 09:26:53 hostname systemd[1]: Unit plexmediaserver.service entered failed state.
Nov 28 09:26:53 hostname systemd[1]: plexmediaserver.service failed.
Nov 28 09:26:59 hostname systemd[1]: plexmediaserver.service holdoff time over, scheduling restart.
Nov 28 09:26:59 hostname systemd[1]: Stopping Plex Media Server...
Nov 28 09:26:59 hostname systemd[1]: Starting Plex Media Server...
Nov 28 09:26:59 hostname systemd[1]: start request repeated too quickly for plexmediaserver.service
Nov 28 09:26:59 hostname systemd[1]: Failed to start Plex Media Server.
Nov 28 09:26:59 hostname systemd[1]: Unit plexmediaserver.service entered failed state.
Nov 28 09:26:59 hostname systemd[1]: plexmediaserver.service failed.
https://aur.archlinux.org/packages/plex-media-server/
*Edit*
Nevermind, ended up removing and reinstalling. Started straight away. Sadly lost all my config so now having to redownload all my media meta data.
Last edited by Swarfega (2014-11-28 11:10:39)

Backspace key no longer works to go back a page

Hi, another issue since Mountain Lion upgrade - backspace no longer works in Safari to go back a page. Works fine in Firefox but no go in Safari.
Any ideas?
Thanks

That feature is no longer available on Safari. I have no idea why this decision was made.

Brand new IPOD Touch Apps no longer work after upgrading software

I got a Ipod touch for my wife Today at Wal-Mart. I brought it home, connected to wifi and downloaded some apps and also payed for some. They all worked fine. Then I connected to computer to transfer songs. It told me to upgrade the Ipod software so i Did. After it restarted none of the downloaded apps work anymore. I have read MANY MANY MANY discussions on this and there is no fix. I am not wiping out all the songs and reload everything all over again. It will take forever. My wifes BD is Friday and this is making me so mad after I just dropped $300 on this thing. APPLE!!! Where is the fix? I deleted the apps and reinstalled they still don't work. Anybody got this figured out? I am getting ready to get my money back and tell everyone to avoid buying ipod until they get this upgrade bug fixed.
Message was edited by: 2009 IPOD TOUCH

I have the same problem. Brand new two days ago. I synched the touch with Itunes but wasn't hooked up to the internet at the time so didn't do the software upgrade right away. Then I downloaded about a dozen apps (free and paid) with wifi directly to the touch. They all worked fine. Then I plugged it back in to Itunes and had it upgrade it to 3.1.2. It locked up Itunes several times since then and the downloaded apps no longer work (they start to open then disappear).
The problem is, no one is listening to this problem (including Anna above)! Everyone says "just do a hard reboot, or restore to factory settings, reload the apps, etc." I've tried all the standard troubleshooting but none of it fixes this. It sure seems to me this is a problem with 3.1.2 but Apple isn't helping out here. Where are you APPLE? Use some of those outrageous profits you're making to fix the problem you have created. Here's $300 of my hard earned dollars pretty much down the drain.
Message was edited by: IPatronius

Upon upgrading iPhoto, iPhoto Help no longer works. It gives the error message: "The selected topic is currently unavailable. To see all iPhoto Help, you must be connected to the Internet." Help!?

Upon upgrading iPhoto, iPhoto Help no longer works. It gives the error message: "The selected topic is currently unavailable. To see all iPhoto Help, you must be connected to the Internet." I am obviously connected to the internet since you are reading this.
I tried upgrading permissions but it did not help!? Can anyone tell me what is wrong? Thanks

Try
Reboot the computer, see if that fixes it.
Then try:
Backup your files off the computer (not TimeMachine) and disconnect
Hold c boot off the 10.6 disk and simply reinstalling OS X
Log in and update to 10.6.8
c boot off the 10.6 disk again and use Disk Utility >Repair Disk
reboot and all should be fine, except some third party programs that install kext files, those will have to be reinstalled from fresh sources.

Thanks for responding. Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all. I had numerous apps, music and videos on this touch. It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch n

Thanks for responding. Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all. I had numerous apps, music and videos on this touch. It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch now. I have so much data on this, I don't want to loose or have to restore!
Can you help me?
Thanks

If you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar

Iphone 4 since upgrade to ios 5.1.1 no longer works with made for itunes, iphone devices.

Ever since I upgraded to IOS 5.1.1 my Iphone no longer works for playing music thorugh my Apline car unit, My Logic 3 clock radio, and a Next made for ipod device.
I can sync through ITunes on the PC and can also play videos through the HDMI adapter.   My wifes iphone 4s and the kids hand me down iphone 3s still play fine through these made for Itunes , Ipod , Iphone devices.
I want to downgrade back to the prior IOS I had before Apple encouraged me to install this bugged one.   How do I go about getting a legit non jailbroken prior IOS version installed on my Iphone?
Is Apple aware of this issue , as I have seen blogs about this it is affecting other people?   Will this issue be resolved with ios 6?
Can I get the beta ?
Thanks,
Douglas

Agreed. Same thing here. Just bought a late model Alpine INE-S920Hd and it is all kinds of broken. I think this is happening because Apple shifted the music and video. Totally buggy. Bluetooth refuses to work properly, too. A2dp keeps stealing the audio from Pandora in the Alpine interface. The ipod controls dont work at all.

Forms HOST command no longer works after database upgrade from 10g to 11g

Hi,
After upgrading the database 10g to 11g the forms HOST command no longer works on Unix server. The form used to work fine prior the upgrade. I read all the threads I could find and did not see any solutions. Adding PATH and LD_LIBRARY_PATH does not work because it does not even run a basic shell script. (I saw this solution, adding PATH and LD_LIBRARY_PATH, in many questions / threads).
1. I wouldn't expect the database upgrade to be an issue, but it is the only change we had.
2. Note, 11g is Oracle Fusion Middleware which is quite a bit different than 10g.
I even tried the most basic commands like "echo" which is a build-in Unix command and there is no directory for it (ie. no /usr/bin - so variable PATH is irrelvent). i.e HOST('echo hi'); and HOST('echo "hi" '); and even HOST ('echo hi > /my_file.txt'); all returns FORMS_FAILURE (actually the if is IF FORM_SUCCESS THEN ... else ... and the else part always runs now - whereas it didn't before.).
Or basic commands like /usr/bin/ls as in HOST(/usr/bin/ls). At that point I was just testing the Unix command would return FORM_SUCCESS even though I could not see the results (because they weren't writing to a log file). Notice that I'm using the direct path /usr/bin so no Unix environment variables were needed.
The form does use webutil but that part works. For example, we have webutil_file_transfer( ....) The file shows up on the application server and in the expected directory.
Here's the main goal. Upload a file from clients local PC to the datebase server. The form uploads the file to the Application server, then we have a Unix script to scp (secure copy) the file from the application server to the database server. IF webutil, or any other Oracle functions could put the file on the database server that would be better. But, I don't know of any procedures that do that - or would have done it cleanly (i.e. storing to database and write back to server and then using a blob etc. )
Anyway, I was hoping someone would help with either of these.
1) Get the HOST command to work. - If we can get that to work then I wouldn't need any more help. We can just call the already existing Unix script to copy the file from the application server to the database.
2) OR be able to upload directly to the database server - wanted to do that originally
Any help would be appreciated

Solution for those interested and for anyone else searching this forum for a solution
I found this on My Oracle Support:
<h3>Host Command from Forms Not Working in 11g in Sun Solaris Sparc OS [ID 1157346.1]</h3>
Applies To: Oracle Forms - Version 11.1.1.1.0 and later
Sun SPARC Sun OS
Symptoms:
When trying to execute a Shell script or any OS command using the host() Built-in from Forms 11g, the host()command is not getting executed. The same functionality works on other operating systems and in previous versions like 10gR2.
Steps to be followed:
1) Take a backup and edit the $DOMAIN_HOME/config/fmwconfig/servers/WLS_FORMS/applications/formsapp_11.1.1/config/default.env or any custom environment file.
2) Locate the following environment variable:
LD_PRELOAD=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
3) Comment out this variable. After the changes, it will look like the following:
#LD_PRELOAD=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
3) a) Instead of LD_PRELOAD, kindly use LD_PRELOAD_64 as given below :
LD_PRELOAD_64=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
(This makes HOST AND RUN_REPORT_OBJECT work fine).
4) Save the file and execute your forms. The Host() built-in will work as expected
The LD_PRELOAD setting in default.env is only required for the working of signal chaining facility in JVM version 1.5 and later. If you are not using theSignal chaining facility, this variable is not required. For more information, refer to the following documentation
http://download.oracle.com/docs/cd/E14571_01/doc.1111/e14772/forms.htm#CJAJGAFF

IPad app no long works after upgrading to iOS 7.1.1

iPad app no long works after upgrading to iOS 7.1.1

Did you try deleting then reinstalling the app? Sometimes developers will need to update their apps for compatibility. If it still doesn't work after reinstalling, wait a few days to see if an app update becomes available.

PgUp/PgDn no longer work after upgrading to Firefox 4

I just upgraded from Firefox 3.6 to 4.0., and now the PgUp/PgDn keys (page up/page down) no longer work. Or rather, they act as though caret browsing (F7) is turned on, which it is not. (In caret browsing, PgUp is like the back button and PgDn is like the forward button.) To confirm that caret browsing is off, I've hit F7 and clicked No (multiple times), and also checked about:config, which shows that accessibility.browsewithcaret is false.
More info: (1) Options > Advanced > General > Always use the cursor keys to navigate within pages is unchecked, (2) the PgUp/PgDn keys also don't work when Firefox is restarted in Safe Mode, (3) they don't work on any webpage, (4) they do work correctly in other applications (Microsoft Word, etc.), (5) my operating system is Windows 7 Home Premium (64-bit), and (6) I run Microsoft Security Essentials (antivirus software).
Any ideas?
Could this be a bug? If so, what is the procedure for uninstalling Firefox 4 and returning to Firefox 3.6 -- without losing my bookmarks, add-ons, etc.?
Thanks!

dmtf2010 nailed the problem here (https://bugzilla.mozilla.org/show_bug.cgi?id=640587#c48):
So, the solution is:
1. Go to about:config
2. Find ui.elantech_gesture_hacks.enabled
3. Change its value from -1 to 0
4. Restart FF
5. If you run into a bug that option was designed to fix (non-working page swipe gestures), install the latest Elantech driver (http://www.techspot.com/drivers/driver/file/information/14513/) and reboot.
I've tried his solution and, so far, so good. :)

4.3 Upgrade - 3G No Longer Working

Similar Messages

Maybe you are looking for