4.3 Upgrade S Voice Issues

With the 4.3 upgrade, the SVoice recognition and audibility is terrible. The previous voice was pleasant sounding and very understandable, but the new voice sounds nasally and is difficult to understand. It also does not recognize my commands as well, and often replies that it can't find a network connection. Is there a way to get the previous SVoice back? Is anyone else experiencing this problem?

I'm also having this along with many other issues brought on by the 4.3 update. Unfortunately, there are no announcments for a fix to these issues. There are many frustrated users out there experiencing much worse (including myself). See below for a short list of 4.3 issues:
Major issues in new Android 4.3 update for Galaxy S III:-
- Wake up lag (Sometimes it takes a few seconds to wake the device from standby and sometimes a few minutes)
- Random Freezing
- Huge battery drain
- Bluetooth Audio issues during playback in car
- Stuttering music playback with stock Samsung music app
- Device freezes as soon a call is received (Black screen issue)
- Poor RAM management (very difficult to multitask)
- Wi-Fi issues

Similar Messages

Firmware upgrade encountered an issue

Right now my Galaxy S3 is sitting at a screen that states "Firmware upgrade encountered an issue. Please use Software Repair Assistant & try again." Whenever I power on my phone, I get that message. I've tried to do an Emergency Recovery in both Kies and Kies 3, but neither are able to recover, and the only way, it seems, to get the SRA is to plug my phone into my PC and get it from Autorun. Since my phone is not leaving the error screen, I don't get the auto run option to install the SRA. Is there any way to download it manually to get my phone running, or is it pretty much bricked and I'll have to look at replacement options?

I found a solution on the XDA forums site, but thanks anyway. Looks like I just needed to run the Software Repair Assistant, which I'm a little surprised that the Verizon store I went to didn't have it on hand to attempt to fix my phone. I got my device repaired, and it's working great. Just really wish my Wiimotes worked in Android 4.3.

Hi, we are using mac mini's for our developement purpose. connecting the same through using Real VNC. Mac mini's are late 2009 and 2010. Now we have upgraded them to 10.8.5. after upgrading having display issues after launching the simulators

hi, we are using mac mini's for our developement purpose. connecting the same through using Real VNC. Mac mini's are late 2009 and 2010. Now we have upgraded them to 10.8.5. after upgrading having display issues after launching the simulators, we are unable to view the icons we need to move the simulator (into different places) to view the icons.
Also we are having Mac book pro's (Late 2009 & 2010) after upgrading them to 10.8.5. Unable to launch the mac, getting only white screen with apple icon.
Let me know is there any specific Hardware (Graphic Cards) we need to use for the same.
Please provide me the early solutions.
Regards,
Suresh.

Hi, try this first...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.

All my photos in the iphoto have disappeared, not sure if this related to any iphoto upgrade or other issue, tried to find the photos through the finder (JPG or photo) but failed, can you help me to get back my photos please?

All my photos in the iphoto have disappeared, not sure if this related to any iphoto upgrade or other issue, tried to find the photos through the finder (JPG or photo) but failed, can you help me to get back my photos please?

Help us to help you: There are 9 different versions of iPhoto and they run on seven different versions of the Operating System. The tricks and tips for dealing with issues vary from version to version and OS to OS. So before anyone can help, they need information to work with. Basic stuff:
- What version of iPhoto.
- What version of the Operating System.
- Details. What were you doing when the problem arose?
- Did it ever work properly?
- Are there error messages?
- What steps have you tried already to solve the issue.
Anything else you can think of that might allow someone else to understand your issue.
With this kind of information somebody can develop a starting point for troubleshooting the issue.
Posts that consist of "iPhoto doesn't work. Help" or "iPhoto won't print" or "Suddenly I have no photos!!!!!!!!!!" mean that any helper is simply guessing. More information means you get better assistance. (And no, more exclamation marks do not get help faster or make your issue seem urgent. They just make it seem like you have a stuck key )

Exchange Server 2013 Service Pack Upgrade - Outlook connectivity issue

Hi,
After upgrading to Exchange Server 2013 service pack 1, we are unable to connect via Outlook 2010 or Outlook 2013. Outlook Web Access is working fine though. We have followed all the instructions, and have applied Outlook upgrades, but the issue remain the
same. Outlook was working fine before the upgrade.
Have we missed out something. I would highly appreciate if someone can help out? I'm not sure if this is the known issue as I can't seem to find anything on the internet.
Already applied the transport fix.
Thanks in advance!

Hi,
According to your description, your Outlook 2010 and Outlook 2013 come across the connectivity issue.
To narrow down the issue, I’d like to recommend the following troubleshooting:
1. Check if the issue happens on all Outlook users
2. Check the Outlook Anywhere connectivity by using ExRCA:
https://testconnectivity.microsoft.com/
Additionally, MAPI over HTTP is only supported when you use Outlook 2013 sp1 and Exchange 2013 sp1 at the same time. Since the issue also happens on Outlook 2010 client, we can firstly try the above troubleshooting.
If you have any question , please feel free to let me know.
Thanks,
Angela Shi
TechNet Community Support

Did iOS 4.0.1 Update fix Bluetooth muffled voice issue?

can you guys report if the iOS4 update released Thursday addressed the problems with the Bluetooth connection/sound quality/voice clarity?? I haven't updated my iPhone 4 yet so I can't test for myself. But i'd like to know if the muffled voice issue has been resolved, thanks!
(My bluetooth device: Plantronics Voyager Pro)

omg.. okay.. i thought about going to Costco and buying a Jawbone just to test it out.. but sounds like you guys have tried w/multiple bluetooth devices and it's not helping any .. what's even more sad is you've also stated you've exchanged your phones and it still doesn't get any better. i was hoping an exchange would help~i have read some ppl's stories that they exchanged their phone and their bluetooth problems got resolved (one guy even reporting ,w/a pic to show, being ~40ft away w/no issues!).. i get about 20ft and my bluetooth just straight up disconnects!
but this is the crazy story:: im having a unique issue in my kitchen (which is very very small!).. i put my phone on the dining table and walk 4ft to the sink and ppl say i sound robotic, like the Transformers talk in the movie.. but if i walk elsewhere (not into the kitchen), it seems to work ok. now i have a Nextel phone too.. i can repeat what i do and not have any robotic sounds.. i have never had any problems using my bluetooth with my Nextel or my iPhone 3G, never ever-ever!! whut the heCKKKKKKKKKKK!!!!!!!!!?!?!?!?!

AIM Voice issue

I have K7N420 Pro MB
Maxtor 80G HD
256MB RAM
AMD 1800+ CPU
ACER CD burner
350W Ps
Using on-board NIC, Sound, Video.
External WebSTAR Cablemodem w/NAT Firewall, DHCP
AIM chat works but AIM voice does not.
I can record and play back using my microphone and speakers attached to the audio connectors on the rear of the computer.
Even setting computer on DMZ in Cablemodem, AIM voice does not work.
Is there anything in MB drivers set that is incompatable with AIM Voice?
Has anybody had success using AIM voice with this MB? :(
Thanks
Blafay

This issue occurs because Advanced Integration Module (AIM)-Cisco Unity Express (CUE) has run out of space. The problem centers around the clean up procedures that run on the module. This process is not running properly, so the module is not cleaning up the database and logs file as expected.To resolve this issue, clean the disk first. This defect applies to CUE versions 2.0.1 and 2.1.1. For a permanent solution, upgrade the CUE version to 2.1.2

Post Upgrade SQL Performance Issue

Hello,
I Just Upgraded/Migrated my database from 11.1.0.6 SE to 11.2.0.3 EE. I did this with datapump export/import out of the 11.1.0.6 and into a new 11.2.0.3 database. Both the old and the new database are on the same Linux server. The new database has 2GB more RAM assigned to its SGA then the old one. Both DB are using AMM.
The strange part is I have a SQL statement that completes in 1 second in the Old DB and takes 30 seconds in the new one. I even moved the SQL Plan from the Old DB into the New DB so they are using the same plan.
To sum up the issue. I have one SQL statement using the same SQL Plan running at dramatically different speeds on two different databases on the same server. The databases are 11.1.0.7 SE and 11.2.0.3 EE.
Not sure what is going on or how to fix it, Any help would be great!
I have included Explains and Auto Traces from both NEW and OLD databases.
NEW DB Explain Plan (Slow)
Plan hash value: 1046170788
| Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 94861 | 193M| | 74043 (1)| 00:18:52 |
| 1 | SORT ORDER BY | | 94861 | 193M| 247M| 74043 (1)| 00:18:52 |
| 2 | VIEW | PBM_MEMBER_INTAKE_VW | 94861 | 193M| | 31803 (1)| 00:08:07 |
| 3 | UNION-ALL | | | | | | |
| 4 | NESTED LOOPS OUTER | | 1889 | 173K| | 455 (1)| 00:00:07 |
|* 5 | HASH JOIN | | 1889 | 164K| | 454 (1)| 00:00:07 |
| 6 | TABLE ACCESS FULL| PBM_CODES | 2138 | 21380 | | 8 (0)| 00:00:01 |
|* 7 | TABLE ACCESS FULL| PBM_MEMBER_INTAKE | 1889 | 145K| | 446 (1)| 00:00:07 |
|* 8 | INDEX UNIQUE SCAN | ADJ_PK | 1 | 5 | | 1 (0)| 00:00:01 |
| 9 | NESTED LOOPS | | 92972 | 9987K| | 31347 (1)| 00:08:00 |
| 10 | NESTED LOOPS OUTER| | 92972 | 8443K| | 31346 (1)| 00:08:00 |
|* 11 | TABLE ACCESS FULL| PBM_MEMBERS | 92972 | 7989K| | 31344 (1)| 00:08:00 |
|* 12 | INDEX UNIQUE SCAN| ADJ_PK | 1 | 5 | | 1 (0)| 00:00:01 |
|* 13 | INDEX UNIQUE SCAN | PBM_EMPLOYER_UK1 | 1 | 17 | | 1 (0)| 00:00:01 |
Predicate Information (identified by operation id):
5 - access("C"."CODE_ID"="MI"."STATUS_ID")
7 - filter("MI"."CLAIM_NUMBER" LIKE '%A0000250%' AND "MI"."CLAIM_NUMBER" IS NOT NULL)
8 - access("MI"."ADJUSTER_ID"="A"."ADJUSTER_ID"(+))
11 - filter("M"."THEIR_GROUP_ID" LIKE '%A0000250%' AND "M"."THEIR_GROUP_ID" IS NOT NULL)
12 - access("M"."ADJUSTER_ID"="A"."ADJUSTER_ID"(+))
13 - access("M"."GROUP_CODE"="E"."GROUP_CODE" AND "M"."EMPLOYER_CODE"="E"."EMPLOYER_CODE")
Note
- SQL plan baseline "SYS_SQL_PLAN_a3c20fdcecd98dfe" used for this statement
OLD DB Explain Plan (Fast)
Plan hash value: 1046170788
| Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 95201 | 193M| | 74262 (1)| 00:14:52 |
| 1 | SORT ORDER BY | | 95201 | 193M| 495M| 74262 (1)| 00:14:52 |
| 2 | VIEW | PBM_MEMBER_INTAKE_VW | 95201 | 193M| | 31853 (1)| 00:06:23 |
| 3 | UNION-ALL | | | | | | |
| 4 | NESTED LOOPS OUTER | | 1943 | 178K| | 486 (1)| 00:00:06 |
|* 5 | HASH JOIN | | 1943 | 168K| | 486 (1)| 00:00:06 |
| 6 | TABLE ACCESS FULL| PBM_CODES | 2105 | 21050 | | 7 (0)| 00:00:01 |
|* 7 | TABLE ACCESS FULL| PBM_MEMBER_INTAKE | 1943 | 149K| | 479 (1)| 00:00:06 |
|* 8 | INDEX UNIQUE SCAN | ADJ_PK | 1 | 5 | | 0 (0)| 00:00:01 |
| 9 | NESTED LOOPS | | 93258 | 9M| | 31367 (1)| 00:06:17 |
| 10 | NESTED LOOPS OUTER| | 93258 | 8469K| | 31358 (1)| 00:06:17 |
|* 11 | TABLE ACCESS FULL| PBM_MEMBERS | 93258 | 8014K| | 31352 (1)| 00:06:17 |
|* 12 | INDEX UNIQUE SCAN| ADJ_PK | 1 | 5 | | 0 (0)| 00:00:01 |
|* 13 | INDEX UNIQUE SCAN | PBM_EMPLOYER_UK1 | 1 | 17 | | 0 (0)| 00:00:01 |
Predicate Information (identified by operation id):
5 - access("C"."CODE_ID"="MI"."STATUS_ID")
7 - filter("MI"."CLAIM_NUMBER" LIKE '%A0000250%')
8 - access("MI"."ADJUSTER_ID"="A"."ADJUSTER_ID"(+))
11 - filter("M"."THEIR_GROUP_ID" LIKE '%A0000250%')
12 - access("M"."ADJUSTER_ID"="A"."ADJUSTER_ID"(+))
13 - access("M"."GROUP_CODE"="E"."GROUP_CODE" AND "M"."EMPLOYER_CODE"="E"."EMPLOYER_CODE")
NEW DB Auto trace (Slow)
active txn count during cleanout     0
blocks decrypted     0
buffer is not pinned count     664129
buffer is pinned count     3061793
bytes received via SQL*Net from client     3339
bytes sent via SQL*Net to client     28758
Cached Commit SCN referenced     662366
calls to get snapshot scn: kcmgss     3
calls to kcmgas     0
calls to kcmgcs     8
CCursor + sql area evicted     0
cell physical IO interconnect bytes     0
cleanout - number of ktugct calls     0
cleanouts only - consistent read gets     0
cluster key scan block gets     0
cluster key scans     0
commit cleanout failures: block lost     0
commit cleanout failures: callback failure      0
commit cleanouts     0
commit cleanouts successfully completed     0
Commit SCN cached     0
commit txn count during cleanout     0
concurrency wait time     0
consistent changes     0
consistent gets     985371
consistent gets - examination     2993
consistent gets direct     0
consistent gets from cache     985371
consistent gets from cache (fastpath)     982093
CPU used by this session     3551
CPU used when call started     3551
CR blocks created     0
cursor authentications     1
data blocks consistent reads - undo records applied     0
db block changes     0
db block gets     0
db block gets direct     0
db block gets from cache     0
db block gets from cache (fastpath)     0
DB time     3553
deferred (CURRENT) block cleanout applications     0
dirty buffers inspected     0
Effective IO time     0
enqueue releases     0
enqueue requests     0
execute count     3
file io wait time     0
free buffer inspected     0
free buffer requested     0
heap block compress     0
Heap Segment Array Updates     0
hot buffers moved to head of LRU     0
HSC Heap Segment Block Changes     0
immediate (CR) block cleanout applications     0
immediate (CURRENT) block cleanout applications     0
IMU Flushes     0
IMU ktichg flush     0
IMU Redo allocation size     0
IMU undo allocation size     0
index fast full scans (full)     2
index fetch by key     0
index scans kdiixs1     12944
lob reads     0
LOB table id lookup cache misses     0
lob writes     0
lob writes unaligned     0
logical read bytes from cache     -517775360
logons cumulative     0
logons current     0
messages sent     0
no buffer to keep pinned count     10
no work - consistent read gets     982086
non-idle wait count     6
non-idle wait time     0
Number of read IOs issued     0
opened cursors cumulative     4
opened cursors current     1
OS Involuntary context switches     853
OS Maximum resident set size     0
OS Page faults     0
OS Page reclaims     2453
OS System time used     9
OS User time used     3549
OS Voluntary context switches     238
parse count (failures)     0
parse count (hard)     0
parse count (total)     1
parse time cpu     0
parse time elapsed     0
physical read bytes     0
physical read IO requests     0
physical read total bytes     0
physical read total IO requests     0
physical read total multi block requests     0
physical reads     0
physical reads cache     0
physical reads cache prefetch     0
physical reads direct     0
physical reads direct (lob)     0
physical write bytes     0
physical write IO requests     0
physical write total bytes     0
physical write total IO requests     0
physical writes     0
physical writes direct     0
physical writes direct (lob)     0
physical writes non checkpoint     0
pinned buffers inspected     0
pinned cursors current     0
process last non-idle time     0
recursive calls     0
recursive cpu usage     0
redo entries     0
redo size     0
redo size for direct writes     0
redo subscn max counts     0
redo synch time     0
redo synch time (usec)     0
redo synch writes     0
Requests to/from client     3
rollbacks only - consistent read gets     0
RowCR - row contention     0
RowCR attempts     0
rows fetched via callback     0
session connect time     0
session cursor cache count     1
session cursor cache hits     3
session logical reads     985371
session pga memory     131072
session pga memory max     0
session uga memory     392928
session uga memory max     0
shared hash latch upgrades - no wait     284
shared hash latch upgrades - wait     0
sorts (memory)     3
sorts (rows)     243
sql area evicted     0
sql area purged     0
SQL*Net roundtrips to/from client     4
switch current to new buffer     0
table fetch by rowid     1861456
table fetch continued row     9
table scan blocks gotten     0
table scan rows gotten     0
table scans (short tables)     0
temp space allocated (bytes)     0
undo change vector size     0
user calls     7
user commits     0
user I/O wait time     0
workarea executions - optimal     10
workarea memory allocated     342
OLD DB Auto trace (Fast)
active txn count during cleanout     0
buffer is not pinned count     4
buffer is pinned count     101
bytes received via SQL*Net from client     1322
bytes sent via SQL*Net to client     9560
calls to get snapshot scn: kcmgss     15
calls to kcmgas     0
calls to kcmgcs     0
calls to kcmgrs     1
cleanout - number of ktugct calls     0
cluster key scan block gets     0
cluster key scans     0
commit cleanouts     0
commit cleanouts successfully completed     0
concurrency wait time     0
consistent changes     0
consistent gets     117149
consistent gets - examination     56
consistent gets direct     115301
consistent gets from cache     1848
consistent gets from cache (fastpath)     1792
CPU used by this session     118
CPU used when call started     119
cursor authentications     1
db block changes     0
db block gets     0
db block gets from cache     0
db block gets from cache (fastpath)     0
DB time     123
deferred (CURRENT) block cleanout applications     0
Effective IO time     2012
enqueue conversions     3
enqueue releases     2
enqueue requests     2
enqueue waits     1
execute count     2
free buffer requested     0
HSC Heap Segment Block Changes     0
IMU Flushes     0
IMU ktichg flush     0
index fast full scans (full)     0
index fetch by key     101
index scans kdiixs1     0
lob writes     0
lob writes unaligned     0
logons cumulative     0
logons current     0
messages sent     0
no work - consistent read gets     117080
Number of read IOs issued     1019
opened cursors cumulative     3
opened cursors current     1
OS Involuntary context switches     54
OS Maximum resident set size     7868
OS Page faults     12
OS Page reclaims     2911
OS System time used     57
OS User time used     71
OS Voluntary context switches     25
parse count (failures)     0
parse count (hard)     0
parse count (total)     3
parse time cpu     0
parse time elapsed     0
physical read bytes     944545792
physical read IO requests     1019
physical read total bytes     944545792
physical read total IO requests     1019
physical read total multi block requests     905
physical reads     115301
physical reads cache     0
physical reads cache prefetch     0
physical reads direct     115301
physical reads prefetch warmup     0
process last non-idle time     0
recursive calls     0
recursive cpu usage     0
redo entries     0
redo size     0
redo synch writes     0
rows fetched via callback     0
session connect time     0
session cursor cache count     1
session cursor cache hits     2
session logical reads     117149
session pga memory     -983040
session pga memory max     0
session uga memory     0
session uga memory max     0
shared hash latch upgrades - no wait     0
sorts (memory)     2
sorts (rows)     157
sql area purged     0
SQL*Net roundtrips to/from client     3
table fetch by rowid     0
table fetch continued row     0
table scan blocks gotten     117077
table scan rows gotten     1972604
table scans (direct read)     1
table scans (long tables)     1
table scans (short tables)     2
undo change vector size     0
user calls     5
user I/O wait time     0
workarea executions - optimal     4

Hi Srini,
Yes the stats on the tables and indexes are current in both DBs. However the NEW DB has "System Stats" in sys.aux_stats$ and the OLD DB does not. The old DB has optimizer_index_caching=0 and optimizer_index_cost_adj=100. The new DB as them at optimizer_index_caching=90 and optimizer_index_cost_adj=25 but should not be using them because of the "System Stats".
Also I thought none of the SQL Optimize stuff would matter because I forced in my own SQL Plan using SPM.
Differences in init.ora
OLD-11     optimizerpush_pred_cost_based = FALSE
NEW-15     audit_sys_operations = FALSE
     audit_trail = "DB, EXTENDED"
     awr_snapshot_time_offset = 0
OLD-16     audit_sys_operations = TRUE
     audit_trail = "XML, EXTENDED"
NEW-22     cell_offload_compaction = "ADAPTIVE"
     cell_offload_decryption = TRUE
     cell_offload_plan_display = "AUTO"
     cell_offload_processing = TRUE
NEW-28     clonedb = FALSE
NEW-32     compatible = "11.2.0.0.0"
OLD-27     compatible = "11.1.0.0.0"
NEW-37     cursor_bind_capture_destination = "memory+disk"
     cursor_sharing = "FORCE"
OLD-32     cursor_sharing = "EXACT"
NEW-50     db_cache_size = 4294967296
     db_domain = "my.com"
OLD-44     db_cache_size = 0
NEW-54     db_flash_cache_size = 0
NEW-58     db_name = "NEWDB"
     db_recovery_file_dest_size = 214748364800
OLD-50     db_name = "OLDDB"
     db_recovery_file_dest_size = 8438939648
NEW-63     db_unique_name = "NEWDB"
     db_unrecoverable_scn_tracking = TRUE
     db_writer_processes = 2
OLD-55     db_unique_name = "OLDDB"
     db_writer_processes = 1
NEW-68     deferred_segment_creation = TRUE
NEW-71     dispatchers = "(PROTOCOL=TCP) (SERVICE=NEWDBXDB)"
OLD-61     dispatchers = "(PROTOCOL=TCP) (SERVICE=OLDDBXDB)"
NEW-73     dml_locks = 5068
     dst_upgrade_insert_conv = TRUE
OLD-63     dml_locks = 3652
     drs_start = FALSE
NEW-80     filesystemio_options = "SETALL"
OLD-70     filesystemio_options = "none"
NEW-87     instance_name = "NEWDB"
OLD-77     instance_name = "OLDDB"
NEW-94     job_queue_processes = 1000
OLD-84     job_queue_processes = 100
NEW-104     log_archive_dest_state_11 = "enable"
     log_archive_dest_state_12 = "enable"
     log_archive_dest_state_13 = "enable"
     log_archive_dest_state_14 = "enable"
     log_archive_dest_state_15 = "enable"
     log_archive_dest_state_16 = "enable"
     log_archive_dest_state_17 = "enable"
     log_archive_dest_state_18 = "enable"
     log_archive_dest_state_19 = "enable"
NEW-114     log_archive_dest_state_20 = "enable"
     log_archive_dest_state_21 = "enable"
     log_archive_dest_state_22 = "enable"
     log_archive_dest_state_23 = "enable"
     log_archive_dest_state_24 = "enable"
     log_archive_dest_state_25 = "enable"
     log_archive_dest_state_26 = "enable"
     log_archive_dest_state_27 = "enable"
     log_archive_dest_state_28 = "enable"
     log_archive_dest_state_29 = "enable"
NEW-125     log_archive_dest_state_30 = "enable"
     log_archive_dest_state_31 = "enable"
NEW-139     log_buffer = 7012352
OLD-108     log_buffer = 34412032
OLD-112     max_commit_propagation_delay = 0
NEW-144     max_enabled_roles = 150
     memory_max_target = 12884901888
     memory_target = 8589934592
     nls_calendar = "GREGORIAN"
OLD-114     max_enabled_roles = 140
     memory_max_target = 6576668672
     memory_target = 6576668672
NEW-149     nls_currency = "$"
     nls_date_format = "DD-MON-RR"
     nls_date_language = "AMERICAN"
     nls_dual_currency = "$"
     nls_iso_currency = "AMERICA"
NEW-157     nls_numeric_characters = ".,"
     nls_sort = "BINARY"
NEW-160     nls_time_format = "HH.MI.SSXFF AM"
     nls_time_tz_format = "HH.MI.SSXFF AM TZR"
     nls_timestamp_format = "DD-MON-RR HH.MI.SSXFF AM"
     nls_timestamp_tz_format = "DD-MON-RR HH.MI.SSXFF AM TZR"
NEW-172     optimizer_features_enable = "11.2.0.3"
     optimizer_index_caching = 90
     optimizer_index_cost_adj = 25
OLD-130     optimizer_features_enable = "11.1.0.6"
     optimizer_index_caching = 0
     optimizer_index_cost_adj = 100
NEW-184     parallel_degree_limit = "CPU"
     parallel_degree_policy = "MANUAL"
     parallel_execution_message_size = 16384
     parallel_force_local = FALSE
OLD-142     parallel_execution_message_size = 2152
NEW-189     parallel_max_servers = 320
OLD-144     parallel_max_servers = 0
NEW-192     parallel_min_time_threshold = "AUTO"
NEW-195     parallel_servers_target = 128
NEW-197     permit_92_wrap_format = TRUE
OLD-154     plsql_native_library_subdir_count = 0
NEW-220     result_cache_max_size = 21495808
OLD-173     result_cache_max_size = 0
NEW-230     service_names = "NEWDB, NEWDB.my.com, NEW"
OLD-183     service_names = "OLDDB, OLD.my.com"
NEW-233     sessions = 1152
     sga_max_size = 12884901888
OLD-186     sessions = 830
     sga_max_size = 6576668672
NEW-238     shared_pool_reserved_size = 35232153
OLD-191     shared_pool_reserved_size = 53687091
OLD-199     sql_version = "NATIVE"
NEW-248     star_transformation_enabled = "TRUE"
OLD-202     star_transformation_enabled = "FALSE"
NEW-253     timed_os_statistics = 60
OLD-207     timed_os_statistics = 5
NEW-256     transactions = 1267
OLD-210     transactions = 913
NEW-262     use_large_pages = "TRUE"

Has the recent Itunes upgrade caused incompatibility issue with APPLE TV 1st gen?

after recent upgrade to itunes, itunes no longer recognizes data on my apple tv 1st gen....but the Apple TV still has them loaded. additonally this new itunes does not let me resync new songs or movies, etc. thoughts? thanks!

I'm having the exact same issue. Nothing in the "Music" menu except "My Music". I Noticed it this afternoon when I woke my Apple TV from standby. The disappearance, in my case, was not related to a reset. My Apple TV has not been reset since the power went out here several weeks ago. Though I obviously don't know for sure, I'm guessing that it's some kind of store problem and we most likely won't be able to correct it from our end.

PSE 8 upgrade album conversion issue

I upgraded my system to Windows 7 and since I was going to have to reload everything anyway, I upgraded to PSE 8 at the same time.
Before the upgrade I saved my catalog files to my external drive and then moved them back to the C:\Program Files\Adobe folder I put it there because I didn't see a catalog folder under the Elements Organizer folder
Anyway, I then converted my catalog - renamed it "My Catalog 7.0" to differentiate
The conversion says it was good and upon inspection all meta tags and albums seem okay. The issue is that it didn't bring in the images from May 2009 onward. I know those were in the catalog in 7.0 and had tags on them.
Any sggestions on how to get those images (with their metadata) into PSE 8.0?
Susan

Thanks John
You were right, I pulled the wrong file to convert (the one I used to convert 6 to 7)
Thankfully I had a back up and was able to restore my correct 7 catalog. All is good now.

Can Anyone Help? Upgrade with Windows Issue

I bought my daughter a Ipod nano for Christmas this past year (2005). Everything worked great until the new 6.0 upgrade. We downloaded the upgrade last week and it was completed successfully. Yet when I go to my desktop and try to go to the site I get nothing at all. I can't even access the itunes site. Can't even access it through apple.com. I get the download message. I spent hours on the phone with apple trying to figure out the problem. Uninstalled and reinstalled the whole thing several times. Even went back to my original CD that came with the ipod and still get message that I need to upgrade. I was told
( by an apple rep) I have to do a msconfig start up on my computer for the upgrade to work on Windows. Upon doing that I can access my library but access to store is denied. I called apple again and was told they have no idea what is going on but it has to do with the upgrade and windows. I was basically told I may want to consider selling my Ipod, by a apple tech. Is anyone else having this problem. I just want to know how to get the upgrade using windows xp and be able to use it without having to msconfig start and then still not be able to access anything.
I have tried everything, from shutting down my firewall, anitvirus to rebooting my computer back to before I ever put Itunes in it since I was unable to un-install it with the add/remove on my computer.
Can anyone give me some advice on how to get this to work with windows? It would be greatly appreciated since I have a few friends also having the same issues. Thanks

Don't give up yet. At this point I would suggest cleaning your system with ipod and itunes software and reinstall. I know you tried this before but I'm going to give you more detailed instructions. Please read them carefully first before doing them and ask questions if you don't understand them. Also don't skip anything and be careful to not skip part of a step.
1. Uninstall itunes and ipod software
2. Reboot your PC
3. Re-download the itunes installer and QT and save this installer to your desktop
4. Go to C:\WINDOWS\Downloaded Installations. You should see folders like {06EB3288-C5F4-4C73-8EEE-AC798668FF66}
5. Look in each of these folders for itunes.msi and delete the folder. Be careful to only delete the folders containing itunes.msi
6. Clean out your the following folders, Delete as much as you can in these folders except for the folders Cookies, History, Temporary Internet Files.
a. C:\windows\temp (if one exists)
b. C:\Documents and Settings\{username}\Local Settings\Temp
Sometimes installers will pick up old files or won’t delete their temporary files.
Also delete c:\program files\itunes & c:\program files\ipod
7. Go to http://www.download.com/3000-2094-881470.html and download the regcleaner. Unpack it and run it. This is a nice utility that will delete broken registry entries and create a file with them. This way if it deletes anything needed you can add it back. Note I never had to do this with using it for many years. Also it doesn't list XP but you'll be fine. I run XP on both.
8. Reboot your PC.
9. It wouldn't hurt to scan your PC for viruses at this point.
10. Now try to go and install everything again. I'd do QT first then follow with itunes. Remember to disable virus/firewall/privacy/web accelerators before launching the install.
You don't have to try the QT if you don't want to but if you do make sure you do it first before itunes and ipod software.
I hope this helps! Let me know what happens.

BPC 7.5 Upgrade - Unary Operator Issue

We have been performing a large upgrade from a previous version of the software and are looking for some help on some of the issues with the upgrade. One of the issues we have been having is that some of our dimensions were using the property "Unary Operator" to have parent members ignore certain child members in their values. We have seen in 7.5 MS that the unary operator doesn't always perform the same and in one instance wouldn't allow other hierarchies to even roll up at all. I guess what i am looking for is a way to have the same affect (limit some children members from rolll up) that Unary Operators had in previous versions, in 7.5. I had looked at other forums and seen that dimension formulas were used to filter out the child members but i was wondering if there were any other viable options.

Hi Kenton,
as Nilanjan wrote if you have a hierarchy all the children will be rolled up to the parent, so works the OLAP.
If you some parents don't correspond to the sum of his children then you must propcess the application to align the parent with the children.
If you don't want to sum some children you must create another subparent with only the children you want or create a dimension member outside of the hierarchy using the dimension formula, but remember that this valur is not memorized, it's calculated during the evdre, that means that a lot of dimension formula will reduce the performance.
Kind regards
Roberto

Upgrading questions and issues

We are trying to move from Headstart version label of 18 in the current 6i repository. I think it is 6.5 or something like that. We are trying to move to Headstart version 6.5.3.2. We currently are using Headstart in our 6i Repository. To do this we have taken a RAU export from the 6i database (named ecsd) and imported into a new database (named repos1). The database repos1 is to be the 9i repository.
It seems this repository has been through at least one version of Headstart before this. In the Edit workspace it says there is a version 1.0 excluded from the workarea.
I am constrained to remove the older HeadStart objects by management. I cannot simply exclude the application from the workarea. Is this OK to do?
When I follow the Installation Instructions for installing Headstart 6.5.3.0 I really am not finding a section that deals with upgrading a repository to a newer version of Headstart or removing a version of Headstart. Is there a document on this subject? Are there any words of advice for me?
It seems to me that to references the newly installed Headstart objects what is required is to Edit Generator Preference then to set the Preference Set to the new Headstart which seems to be QMS65_RECOMMENDED. Is this correct?
Thanks

Macatron prime wrote:
To Apple GUI Designers,
Solid work overall on Leopard but I have some Questions, Issues and Suggestions-
Hi M,
Leopard is two OSs ago; I think it's safe to say there will be no further changes to it.
We are just users, like yourself, here. To give Apple feedback:
http://www.apple.com/feedback/

Voice Issue

Dear Support,
I am using Iphone 3gs, version 5.1.1
from today morning, the sound is not working means voice is coming only on speaker even with hands free.
but without handsfree voice is not coming.
Pl.help me to fix this issue.
Jeevan

I have called to my Operator Orange IL. The told me turn off my mobile for 3 minutes to reset my network connection, they did some with my sim remotely and then turn on, in additional a got a call from Nokia Care Point Israel, they told me to call after 1 week to check the FW again, bacause they just get the FW and do some tests on it.
Message Edited by perlik on 02-Aug-2009 05:05 PM
Everywhere is well, where we weren't yet
Mobile: iPhone 3GS 16 GB
FW: 3.1.2

Visual Upgrade SiteDirectorySettings.aspx issue

After completing a SharePoint 2007 to 2010 migration I perfomed a Visual Upgrade on my site collections. I noticed that the Site Directory Settings page (SiteDirectorySettings.aspx ) in the site settings section is not
rendering properly. It looks like it is still trying to render using the old SharePoint 2007 look/feel.
Has anyone else noticed this issue?
Repo steps:
Database attach migration from 2007 to 2010
Perform Visual Upgrade
Go to Site Actions, Site Settings, choose Site Directory Settings under the Site Collection Administration grouping
If you get your question answered, please come back and mark the reply as an answer.
If you are helped by an answer to someone else's question, please mark it as helpful.
Mike Hacker | Blog: http://blog.mikehacker.net

Work around I have used for this is
Go to 14 hive/Template/Layouts directory
Put sitedirectorysettings.aspx file in edit mode.
Look for page directive (most probably the first line of the page) and attribute named
MasterPageFile with value "~/_layouts/application.master".
Just change that value to "v4.master" and save it.
refresh the sitedirectory page (http://site_url/_layouts/SiteDirectorySettings.aspx) and it should be using v4.master as master page.
After:
<%@ Page language="C#" MasterPageFile="v4.master" Inherits="Microsoft.SharePoint.Portal.SiteAdmin.SiteDirectorySettings,Microsoft.SharePoint.Portal,Version=14.0.0.0,Culture=neutral,PublicKeyToken=71e9bce111e9429c" %>
P.S.: I tried to use DynamicMasterPageFile attribute but it does not work as this property does not exists on page that inherits 'Microsoft.SharePoint.Portal.SiteAdmin.SiteDirectorySettings'. If anyone has idea to make it dynamic, please share with us.
Parser Error Message: Error parsing attribute 'dynamicmasterpagefile': Type 'Microsoft.SharePoint.Portal.SiteAdmin.SiteDirectorySettings' does not have a public property named 'dynamicmasterpagefile'.

4.3 Upgrade S Voice Issues

Similar Messages

Maybe you are looking for