4:3 video gets truncated on TV

Hi All
I have recently encoded a 4:3 video using iDVD. I have selected the 4:3 option in iDVD. Much to my surprise, I realized that the sides of the video gets truncated during playback on a TV. I have checked the TV setting is at 4:3 too.
What puzzles me was that playback on a PC was absolutely fine!
Anyone has a means of resolving ?
Jojo

The audio from the movie clips was the problem. The audio seemed to slip behind the video each transition. I was combining 15 video podcasts to try and work round the lack of a playall feature.
I wanted to select the transition time to zero but could not find this option. The manual button did not seem to allow this? I played around with a few settings, different transitions different intervals but the problem always showed when looking at the final burnt DVD on a standalone player. Frustrating.
I ended up having to go back to imovie and find out that combining projects is also impossible, so had to export each podcast in turn and then recombine in a new project. Very very tedious so if you have any other ideas then let me know.
I'm steadily converting to DVDSP and FCP as imovie/idvd although easy to use are actually quite disappointing in the long run. I wouldn't have minded if they had called it 'imovie lite' or 'imovie basic'. I might have picked up the warning that 'they' actually wanted me to spend more money. Of course I will reevaluate that thought if someone can explain why technically this is difficult/impossible ro acheive but lack of a play all function in iDVD and/or combining projects in iMovie seems a obvious omission. I was not annoyed that the import movies to slideshow workaround in iDVD did not work as it wasn't really intended to do this. Just a bit irritated as it worked fine in preview mode and only became apparent in the final burnt version
Anyway far to long a rant. back to some work

Similar Messages

Data getting truncated while exporting report to a text file in crystal 10?

Hi All,
I am using crystal 10.When exporting report to a text file ,a dialog prompts asking for Character perinch with a default value 9.If I change the value from 9 to 16 i am getting the correct data(that means character per inch value is 16) and it update "CharPerInch" value in registry under following location to 16.
HKEY_CURRENT_USER\Software\Crystal Decisions\10.0\Crystal Reports\Export\Text
The dialog asked for character per inch also has option to select not to prompt again and i also selected that in first go.
When i export the report again in text format it didn't prompt for number of character per inch but the data gets truncated.
What i believe is even though it updates entry in registry and reads, it is not using the same value for export. It never consider the value that is in registry, if the check box is not selected then it is using the value entered in the dialog and if the check box is selected then in the next run it uses the default value as 9.
Can anyone suggest me how to override this problem ? Is there any other setting place in registry where i can enter the number of character per inch.I don't want to crystal to prompt always for character per inch.

Hi Venkateswaran,
The other option to avoid truncation of the data could be
Right click the text filed
Click on Format Text to open the Format Editor
On Common tab check the text box for Can Grow.
This will prevent the data from truncating in preview as well as while exporting to text.
Otherwise you will have to set the characters per inch to 16 each time. I donu2019t see changing the registry value causing any difference here.
Regards,
Aditya Joshi

Error Message in selection screen Status bar is getting truncated

Hi Guys,
Error Message in selection screen Staus bar is getting truncated (full message is not getting displayed).... can anybody tell me how to reslove this

Hi
Maimum we can give the error message length is 50 char. If you give more than that it will get truncated.
What you can do this split 50 and 50 like that you can give 200 chnars.
Data : Text1 type char50
Text2 type char50
If sy-surc ne 0.
Message Text1 Text2 TYPE "E'' or 'S'
endif.

Cannot view video get error message and only sound.

cannot view video, get error message and sound only. Message Error Code:c000005, address:2568b7ab

I am just finally posting a reply. Looks as though the sound card went out. I was told that I could purchase a new open and install myself. I did not do that, but rather my step-dad just decided it was time to buy a new Mac Mini.

Application server file values getting truncated

Hi,
I'm sending a file to Application server with minimun 1800 characters in a singlw row. The file is getting uploaded into the server but with only 255 chars in the same row. All others are getting truncated.
Can anyone please suggest on this?
Thanks
Itishree.

Hi,
You can download your file from application server using CG3Y.
And upload your file to application server using CG3Z.
I think just a typo mistake by the one who answered before me.
Regards,
Bharati Singh

ALV Header getting truncated in excel

I am using the GRid Layout. but when i am downloading the output in the Excel sheet, the headers are getting truncated.
I have tried increasing the width in the FIELDCAT and also removing the coulmn-optimze option in the layout also. but still after trying the headers are getitng truncated.
Any pointers how can i download without the headers getting truncated.
Thanks

Refer the code snippet:
Follow this way:
CONSTANTS : c_delim TYPE c VALUE cl_abap_char_utilities=>horizontal_tab.
data :it_excel_dwnld TYPE STANDARD TABLE OF t_zzidwnld_data     ,
       wa_excel_dwnld TYPE t_zzidwnld_data .                      .
   CONCATENATE   'Physical Inventory Document'
                'Item '
                'Material '
                'Material Description'
                'Material Group'
                'Plant'
                'Sloc'
                'Doc Date'
                'Book Qty'
                'Counted Qty'
                'Value of Phy Inv Count'
                'Standard Price'
                'Difference Qty'
                'ABS Qty'
                'BUn'
INTO wa_excel_dwnld-line
                               SEPARATED BY c_delim.
APPEND wa_excel_dwnld TO it_excel_dwnld.
CLEAR: wa_excel_dwnld.
LOOP AT it_output INTO wa_output.
CONCATENATE   wa_output-iblnr
                  wa_output-zeili
                  wa_output-matnr
                  wa_output-maktx
                  wa_output-matkl
                  wa_output-werks
                  wa_output-lgort
                  wa_output-bldat
                  v_buchm
                  v_menge
                  v_wrtzl
                  v_stprs
                  v_difqy
                  v_absqy
INTO wa_excel_dwnld-line
                       SEPARATED BY c_delim.
    APPEND wa_excel_dwnld TO it_excel_dwnld.
ENDLOOP.
CALL FUNCTION 'GUI_DOWNLOAD'
    EXPORTING
      filename                = l_flname
      filetype                = 'ASC'
      write_field_separator   = '#'
    TABLES
      data_tab                = it_excel_dwnld

In Read_text FM, the data after 256 characters gets truncated

Hi All,
In this FM, the internal table can't have string type field. In my case the data is in multiple lines of internal table and I am concatenating into a single field which is of type DESCRIPTIONS(string). I am passing this data to a table in smartform.Only 255 characters are printed, remaining data gets truncated. I am using CONVERT_OTF and SX_TABLE_LINE_WIDTH_CHANGE FMs to create PDF. Is it the limitation or I am incorect here?

Your posting title is misleading; there's nothing wrong with FM READ_TEXT. Yes, it returns a table of type TLINE, as you've noted. Perhaps you could close this post and repost in FORM PRINTING with an appropriate title like: Can't show more than 255 characters of text.....but search first, because you cannot be the first person to encounter this limitation.

Report output getting truncated in email attachment

Hello Gurus,
My requirement is to send a report output as an email attachment.
I have done the coding for this but have a small problem. In the attachment the report is getting truncated after certain length.
Can you advise wats the problem ?
Regards,
Suhas

Hello Guys,
I too was contemplating on those lines. But actually i was calculating the File Size incorrectly.
Changed the code & now it working !!!!!!!
BR,
Suhas

Problem in download to application server- file column is getting truncated

We have a program for which there are 2 options a list output or file to be placed on the application server. The TXT file is of length 525 characters.
My problem is while the list output is generated the whole list is getting outputted, but when we take a output on the application server last 10 columns are getting truncated.
Can somebody give a help on this.
Thanks in advance.
Jilly

Use the function module
ARCHIVFILE_SERVER_TO_CLIENT
Pass the values: as download file and destination in the respective fields.
File to be downloaded in :(Pass the exact file name)
PATH :
SDEC01\SAPMNT\INT\HR\OUT\FMLA-20080205-0728
and
Destination to download the file in:
TARGETPATH C:\DOCUMENTS AND SETTINGS\JILFEM\MY DOCUMENTS\FMLA-20080205-0728
Regards,
Jilly

E-mails get truncated when forwarded

When I forward an e-mail from within the e-mail app, the e-mail does not get forwarded completely. For some reason the original text gets truncated.
I first noticed this on IOS 6 on both the iPhone 5 and iPad 3rd gen.
Please advice me what to do, because this way the e-mail app is not reliable.
Kind regards.

Thank you. I will have to try this out with a known troublesome link, but I don't recall getting an "open with" dialog in these circumstances. Also, as I understand these things (and I probably don't) the links I have tried to use have been communication links rather than a file opening function. The problem I got the other day was on a BBC site and the function of the link (which was an e-mail address) was to enable me to post a question. I was able to use that address to post the question without using the link shortcut - just sent an e-mail.

My MacBook Pro gets very slow while doing work like watching movies and using net .. video gets lag very often

My MacBook Pro gets very slow while doing work like watching movies and using net .. video gets lag very often and while surffing on net it gets very slow ...

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
Otherwise, take the steps below when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

HTML result gets truncated after including of the JSF page

Hi there,
I'm trying to create a page that will include dynamically content of JSF pages from another web application.
Thus, there is a web application (Pages) that is deployed under web context: /test-pages and another web application (Faces) that is deployed under web context: /test-faces.
The source code of /test-pages/IndexPage.jsp
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8"></meta>
<title>
IndexPage
</title>
</head>
<body>
<h3>Page Start</h3>
<jsp:include page="header.jsp"/>
<br>
<h1>Index Page of the test-pages application</h1>
<br>
<jsp:include page="footer.jsp"/>
</body>
</html>
The source code of /test-pages/header.jsp
<%
ServletContext servletContext = request.getSession().getServletContext().getContext("/test-faces");
RequestDispatcher reqDispatcher = servletContext.getRequestDispatcher("/faces/header.jsp");
reqDispatcher.include(request, response);
%>
The source code of /test-pages/footer.jsp
<h2>Simple Footer</h2>
The source code of /test-faces/header.jsp
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f"%>
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h"%>
<f:subview id="myID">
     <f:verbatim>
          <h2>Faces Header</h2>
     </f:verbatim>
</f:subview>
The HTML execution result (http://localhost:7001/test-pages/IndexPage.jsp):
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8"></meta>
<title>
IndexPage
</title>
</head>
<body>
<h3>Page Start</h3>
     <h2>Faces Header</h2>
Could you help me understand, why the result gets truncated after including of the JSF page.
Thanks,
Sasha

Thanks you for reply!
Unfortunately, still no luck!
Any other ideas will be highly appreciated!

When I synch my ipod touch it only lets 50 videos get on ipod . I can't get the other videos on even though there's plenty of space available and it's set to synch all movies

When I synch my ipod touch it only lets 50 videos get on ipod . I can't get the other videos on even though there's plenty of space available and it's set to synch all movies. What am I missing?

i had the same problem. did a lot of research..my phone became unusuable. do you use the htc mail? if so that is your problem. there is a bug with it that it keeps eating your memory until you cannot use your phone. i had to do a hard reset. back to factory condition..not happy! but then went to the marketplace and got k-9 mail. that is now my default mail program. i have not had any issues since then. this is what i kept reading over and over for complaints on this phone. it is a major glitch and the only way, as of the time it happened to me, to fix it..

The last digit of invoice vbeln is getting truncated in the file

Hi Experts,
I'm facing problem in both quality and production,the last digit of invoice vbeln is getting truncated in the file when i do export-> local file ->spread sheet.I'm having an alv report using grid display alv is getting display.when output is displayed i'm getting vbeln as 0430098109 and when i'm trying to download into XLS file using export local file spread sheet i'm getting vbeln as 043009810, last digit not appering in the file
Thanks in advance.

PERFORM reset_component_price.
LOOP AT tab_documenti .
    IF tab_documenti-waerk = co_krw .
      tab_documenti-netwr = tab_documenti-netwr * 100 .
    ENDIF .
    MODIFY tab_documenti .
ENDLOOP .
DESCRIBE TABLE tab_documenti LINES num.
IF num > 0.
    IF importa = 'X'.
      PERFORM esporta_file.
    ELSE.
      PERFORM stampa2.
    ENDIF.
ENDIF.
*&      Form recupero_trigger_fatturazione
      text
FORM recupero_trigger_fatturazione.
SELECT vkorg fkdat kunnr vbeln vtweg spart vbtyp
         INTO CORRESPONDING FIELDS OF TABLE tab_vkdfs
         FROM vkdfs
         WHERE vkorg IN s_vkorg
          AND fkdat IN s_edatu
          AND kunnr IN s_kunnr
          AND vbeln IN s_vbeln
          AND vtweg IN s_vtweg
          AND spart IN s_spart
          AND vbtyp IN s_vbtyp.
ENDFORM.
*&      Form TERMINO_REPERIMENTO_DATI_DOCUM
FORM termino_reperimento_dati_docum.
IF NOT port IS INITIAL. "APAB 26/01/04
    REFRESH l_tab_vbak. CLEAR l_tab_vbak.
    SELECT vbeln
           erdat ernam                "APAB 26/01/04
           vkorg vtweg spart kunnr
           vkbur vkgrp vbtyp auart augru
           INTO CORRESPONDING FIELDS OF TABLE l_tab_vbak
           FROM vbak
           WHERE vbeln IN s_vbeln "EQ tab_vkdfs-vbeln Ceriati
           AND   ernam IN s_ernam "APAB 26/01/04
           AND   kunnr IN s_kunnr
           AND   vkorg IN s_vkorg
           AND   vtweg IN s_vtweg
           AND   spart IN s_spart.
    CHECK sy-subrc EQ 0.
    LOOP AT l_tab_vbak WHERE vkbur IN s_vkbur AND
                             vkgrp IN s_vkgrp AND
                             auart IN s_auart AND
                             augru IN s_augru.
      REFRESH l_tab_vbap. CLEAR l_tab_vbap.
      SELECT vbeln posnr pstyv werks kondm matnr netwr waerk kwmeng
             netpr prodh taxm1 knumh                "APAB 26/01/04
             INTO CORRESPONDING FIELDS OF TABLE l_tab_vbap
             FROM vbap
             WHERE vbeln EQ l_tab_vbak-vbeln "tab_vkdfs-vbeln.Ceriati
               AND pstyv IN s_pstyp. "Ceriati
      CHECK sy-subrc EQ 0.
APAB 26/01/04 start - find order reason
      CLEAR l_tab_vbak-bezei.
      SELECT SINGLE bezei INTO l_tab_vbak-bezei FROM tvaut
                          WHERE spras EQ sy-langu
                          AND   augru EQ l_tab_vbak-augru.
find client description
      CLEAR : l_tab_vbak-name1,l_tab_vbak-land1.
      SELECT SINGLE name1 land1 INTO (l_tab_vbak-name1,l_tab_vbak-land1)
                                                               FROM kna1
                                          WHERE kunnr = l_tab_vbak-kunnr.
Ceriati imposte
      SELECT SINGLE taxkd INTO tab_documenti-taxm1 FROM knvi
                                 WHERE kunnr = l_tab_vbak-kunnr
                                 AND aland = 'IT'
                                 AND tatyp = 'MWST'.
      LOOP AT l_tab_vbap WHERE werks IN s_werks AND
                               kondm IN s_kondm AND
                               matnr IN s_matnr.
        IF l_tab_vbak-auart = 'Z1OI' AND ( l_tab_vbap-pstyv = 'TAX' OR
                                           l_tab_vbap-pstyv = 'TAD' ).
          SELECT SINGLE * FROM vbup WHERE vbeln = l_tab_vbap-vbeln
                                    AND   posnr = l_tab_vbap-posnr.
          CHECK vbup-fksaa NE 'C'.
        ENDIF.
        CLEAR vbep.
        CLEAR: qta_uscita_t, qta_cons_t.
        REFRESH l_tab_vbfa.
        SELECT vbelv posnv posnv vbeln posnn vbtyp_n rfmng
        INTO CORRESPONDING FIELDS OF TABLE l_tab_vbfa
           FROM vbfa
           WHERE vbelv EQ l_tab_vbap-vbeln AND
                 posnv EQ l_tab_vbap-posnr AND
                 vbtyp_n EQ 'J'.
        LOOP AT l_tab_vbfa.
          qta_cons_t = l_tab_vbfa-rfmng + qta_cons_t.
        ENDLOOP.
        REFRESH l_tab_vbfa.
        SELECT vbelv posnv posnv vbeln posnn vbtyp_n rfmng bwart
        INTO CORRESPONDING FIELDS OF TABLE l_tab_vbfa
           FROM vbfa
           WHERE vbelv EQ l_tab_vbap-vbeln
             AND posnv EQ l_tab_vbap-posnr
              AND BWART NE SPACE
             AND ( vbtyp_n EQ 'R'
              OR   vbtyp_n EQ 'h' ).
        LOOP AT l_tab_vbfa.
          IF l_tab_vbfa-vbtyp_n = 'h'.
            l_tab_vbfa-rfmng = l_tab_vbfa-rfmng * -1.
          ENDIF.
          qta_uscita_t = qta_uscita_t + l_tab_vbfa-rfmng.
        ENDLOOP.
        SELECT * FROM vbep WHERE vbeln EQ l_tab_vbap-vbeln AND
              posnr EQ l_tab_vbap-posnr
             AND edatu IN s_edatu
              ORDER BY edatu.
          CHECK vbep-bmeng NE 0.
          MOVE vbep-bmeng TO tab_documenti-menge.
CLEAR: qta_uscita,qta_cons.
          IF qta_cons_t = 0.
            CLEAR qta_cons.
            IF qta_uscita_t NE 0.
              IF qta_uscita_t > vbep-bmeng.
                qta_uscita = vbep-bmeng.
                qta_uscita_t = qta_uscita_t - vbep-bmeng.
              ELSE.
                qta_uscita = qta_uscita_t.
                CLEAR qta_uscita_t.
              ENDIF.
            ENDIF.
          ELSE.
            IF qta_cons_t > vbep-bmeng.
              qta_cons = vbep-bmeng.
              qta_cons_t = qta_cons_t - vbep-bmeng.
            ELSE.
              qta_cons = qta_cons_t.
              CLEAR qta_cons_t.
            ENDIF.
            IF qta_uscita_t NE 0.
              IF qta_uscita_t > vbep-bmeng.
                qta_uscita = vbep-bmeng.
                qta_uscita_t = qta_uscita_t - vbep-bmeng.
              ELSE.
                qta_uscita = qta_uscita_t.
                CLEAR qta_uscita_t.
              ENDIF.
            ENDIF.
          ENDIF.
          qta_cons = qta_cons - qta_uscita.
CLEAR: tab_documenti-inco1, tab_documenti-vsart,
                 tab_documenti-bstkd, tab_documenti-bstdk.
          SELECT SINGLE inco1 vsart zterm bstkd bstdk
                                            INTO (tab_documenti-inco1,
                                                 tab_documenti-vsart,
                                                 tab_documenti-zterm,
                                                 tab_documenti-bstkd,
                                                 tab_documenti-bstdk)
                                                  FROM vbkd
                                       WHERE vbeln = l_tab_vbap-vbeln
                                       AND   posnr = l_tab_vbap-posnr.
IF sy-subrc NE 0.
            SELECT SINGLE inco1 vsart zterm bstkd bstdk
                                              INTO (tab_documenti-inco1,
                                                    tab_documenti-vsart,
                                                   tab_documenti-zterm,
                                                   tab_documenti-bstkd,
                                                   tab_documenti-bstdk)
                                                              FROM vbkd
                                         WHERE vbeln = l_tab_vbap-vbeln
                                         AND   posnr = '000000'.
          ENDIF.
CLEAR makt.
          SELECT SINGLE * FROM makt WHERE matnr = l_tab_vbap-matnr
                                      AND spras = sy-langu.
          IF sy-subrc = 0.
            tab_documenti-maktx = makt-maktx.
          ENDIF.
IF qta_cons = l_tab_vbap-kwmeng.
            tab_documenti-qta_c = vbep-bmeng.
            tab_documenti-qta_a = l_tab_vbap-kwmeng - qta_cons
                                                    - qta_uscita.
            CLEAR qta_cons.
          ELSEIF
           qta_cons <= vbep-bmeng.
            tab_documenti-qta_c = qta_cons.
            tab_documenti-qta_a = vbep-bmeng - qta_cons - qta_uscita.
ENDIF.
l_tab_vbap-netwr = l_tab_vbap-netpr * ( tab_documenti-qta_a +
                                                 tab_documenti-qta_c ).
MOVE: l_tab_vbak-vbeln TO tab_documenti-vbeln,
                l_tab_vbak-vkorg TO tab_documenti-vkorg,
                l_tab_vbak-vtweg TO tab_documenti-vtweg,
                l_tab_vbak-spart TO tab_documenti-spart,
                l_tab_vbak-kunnr TO tab_documenti-kunnr,
                l_tab_vbak-vkbur TO tab_documenti-vkbur,
                l_tab_vbak-vkgrp TO tab_documenti-vkgrp,
                l_tab_vbak-vbtyp TO tab_documenti-vbtyp,
                l_tab_vbak-auart TO tab_documenti-auart,
                l_tab_vbak-augru TO tab_documenti-augru,
                l_tab_vbak-bezei TO tab_documenti-bezei, "APAB 26/01/04
                l_tab_vbak-erdat TO tab_documenti-erdat, "APAB 26/01/04
                l_tab_vbak-ernam TO tab_documenti-ernam, "APAB 26/01/04
                l_tab_vbak-name1 TO tab_documenti-name1, "APAB 26/01/04
                l_tab_vbak-land1 TO tab_documenti-land1, "APAB 26/01/04
                tab_vkdfs-fkdat TO tab_documenti-fkdat.
          MOVE: l_tab_vbap-vbeln TO tab_documenti-vbeln,
                l_tab_vbap-posnr TO tab_documenti-posnr,
                l_tab_vbap-pstyv TO tab_documenti-pstyv,
                l_tab_vbap-werks TO tab_documenti-werks,
                l_tab_vbap-kondm TO tab_documenti-kondm,
                l_tab_vbap-matnr TO tab_documenti-matnr,
                l_tab_vbap-netwr TO tab_documenti-netwr,
                l_tab_vbap-waerk TO tab_documenti-waerk,
                l_tab_vbap-netpr TO tab_documenti-netw1, "APAB 26/01/04
                l_tab_vbap-prodh TO tab_documenti-prodh.
MOVE: vbep-edatu TO tab_documenti-fkdat.
IF NOT tab_documenti-qta_a IS INITIAL
          OR NOT tab_documenti-qta_c IS INITIAL.
            APPEND tab_documenti.
          ENDIF.
CLEAR tab_documenti.
        ENDSELECT.
      ENDLOOP.
    ENDLOOP.
    CLEAR tab_documenti.
ENDIF.
IF NOT boll IS INITIAL. "APAB 26/01/04
    LOOP AT tab_vkdfs WHERE vbtyp EQ 'J'.
      SELECT SINGLE * FROM vbuk WHERE vbeln EQ tab_vkdfs-vbeln.
      CHECK sy-subrc = 0.
      IF vbuk-wbstk = 'C'.
        PERFORM prendi_dati.
      ELSE.
        IF port EQ 'X'.
          PERFORM prendi_dati.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.

"fake" 16:9 video gets letterboxed

Hi,
I have a JVC Digital Video camcorder (GR-DVP5). I shot a video partly with 16:9 aspect ratio, which for this camcorder basically means, that it uses only part of the sensor to get (to fake) the correct aspect ratio (4:3 with two black stripes).
When I import the DV video into iMovie, the 4:3 scenes are imported OK, but the 16:9 scenes of the video get (stretched and) letterboxed and it looks like the content should be stretched vertically to fill the full height of the video instead of the black stripes.
Apparently Imovie falsly recognizes the video as 16:9 and not as 4:3 with two black stripes
Changing the project settings from 16:9 to 4:3 doesnt "unstretch", but only cut some of the left and right hand side of the scene. Using crop or fit basically does the same.
I guess, if I can force Imovie in accepting the total video as a 4:3 format (what it basically is), the problem would be solved
Any idea how I can do that? Or any other ideas how to solve the problem.
Kind regards, Raymond

I've found a cure for this bug!! As apple support on the phone convinced me this realy was a bug, there is no way to fix it within Imovie, (and no one seems to have a reaction at all ... ), I checked the Apple site for downloads. There I found MovieConverter Studio. A shareware program which can take the simulated 16:9 DV input and make it into a DV input Imovie recognizes as 4:3.
It can do a lot more, but it does solve my problem.
Regards Raymond

4:3 video gets truncated on TV

Similar Messages

Maybe you are looking for