4.4.2 Note 3 Update... Now Email and other Issues

Since I updated to 4.4.2 this morning, the basic email app shuts down every time you tap on a notification. You then have to go to the app itself and reopen it. Since it's the stock app, you can't uninstall it. Not that I'd want to since I took the time to setup 3 different email accounts.
I also been having issues with the split screen not going away when you swipe it down to the bottom of the screen. The only way to close it is by backing out, which causes the first app you had open to close. Which is frustrating. My Note 3 worked just fine before the update. Any suggestions?

Craziness... Now when I use the split screen function, the windows are locked and are NOT adjustable. And to top things off, the email app now fails to send emails!

Similar Messages

RV042G Log Email and other issues

The RV042G manual said to use this site for support so here goes. After owning and operating the RV082 for many years, I recently upgraded to the RV042G V01. Overall the RV042G hardware appears to function pretty good. The RV042G has faster throughput, but it is slightly slower in command/control response and boot than the RV082. I have now owned the RV042G about two days and have found a number of issues. Specifically, emailing logs doesn't work.
- Emailing logs does not work. RV042G does not appear to handle any type of connection authentication, it does not have a place for the senders user name or password. I have tried SMTP servers that require no authentication and ones that do, none of them work. RV082 worked fine with the Time Warner Cable (TWC) SMTP server, RV042G does not. Additionally, there is NO output in the logs to show a failure. So TWO bugs here. I have checked settings to ensure no blocking rules, have rebooted, and even did a factory default with no luck and absolutely no mention in the logs anywhere of failure to send.
Email is my primary issue, any suggestions on getting this working would be appreciated. I've also identified a number of other issues as well and included them here to avoid multiple posts. These are:
- Port 0 apparently responds to interrogation and shows CLOSED (not STEALTH per grc.com). This was NOT the case for the RV082 and is a potential security vulnerability as it cannot be redirected.
- Port 1 is CLOSED and apparently responds to interrogation. This was NOT the case for the RV082. Normally I would be good on the RV082. I could redirect any OPEN or CLOSED ports to the bit bucket (192.168.1.254 for instance). BUT, the RV042G Port Forwarding is NOT sending things to the bit bucket and instead decides to OVERRIDE the forwarding and respond to queries. So there are TWO bugs here. This is a potential security vulnerability.
- The ALL Logs tab shows nothing, but sub tabs do until AFTER you hit the clear button, then it works as expected. This happens every time you open the logs. Another poster identified this problem so this is confirmation of that issue. Also, once the dialog box for the log has closed, it will not open again until leaving the page and returning.
- Authentication failures will show up in the System Log but not in the Access Log?
- HTTPS html interface works fine in Firefox. However, turn it off and use just HTTP and there is a problem. Can't see the forms and buttons, can only see the background image. This isn't as much of a problem as I can just use HTTPS, however, with the RV082 when HTTPS was activated it would open the remote management portal regardless of whether the button was clicked or not. So really a non-issue but a bug none the less.
- RV082 could send 500 log events, RV042 can only send 100. Again, not a bug but a reduction in capability over the older RV082.
One last thing, your hardware version control numbers and firmware download page are confusing for the RV042G V01. Found this when I checked if there was a newer version of the firmware than what the RV042G shipped with. Here is what the firmware update page shows:
"Cisco RV042G Dual Gigabit WAN VPN Router"
"Firmware Release 4.2.1.02 - RV042, RV082, RV016 firmware 4.2.1.02-tm (V3 hardware required)".
The problem is that you reset the hardware version in the RV042G (V01). Just seems probable that someone will download the firmware for the RV042 V01 and try to put it on the RV042G V01.
I like the RV042G overall and will wait for updates for these issues (email logs would be nice sooner rather than later as this is an advertised feature). The RV082 was a great router for a long time ONCE most of the bugs were fixed, hoping the RV042G will be the same.

Guess I spoke too soon. If Remote Management = Disable and HTTPS = Enable, it will OPEN external access to port 443. So have to use an access rule to kill it off. Can STEALTH Port 1 as well with an access rule but have to block all traffic there. Cannot block Port 0 (make it STEALTH) with an access rule and this needs to be fixed in firmware.
So port forwarding does work but not when sent to the bit bucket, have to use an Access Rule instead. (You can see this by doing the following: turn off HTTPS and remote management and look at port 443 from the outside of the firewall. No response at all. Now enable HTTPS and keep Remote Management disabled and forward port 443 to an unused internal IP address. The port still shows up as OPEN but won't connect. Again, the RV082 did not exhibit this behavoir and would simply not provide any response to an external query if forwarded to an unused internal IP address.)
For clarity, I have the RV042G V01 with Firmware Version : v4.2.1.02 (Jan 18 2012 14:10:55).

Help! Performed software update, now emails and account info gone.

Yesterday morning I performed the software update (Java, couple of security updates, QuickTime), and restarted.
Essentially, every e-mail received between early November 2006 and yesterday is gone. All folders created since then (and since I have started a new business, there are a lot), as well as new account info (new provider for second business, separate from first) is gone, or at least missing in action.
I've been backing up monthly, but for some reason there is no backup since one in January, and Backup (the software I've been using) apparently can't restore even that one – not that that will solve more than a small part of the problem.
ANY suggestions on retrieving the missing emails will be gratefully received, as well as any ideas on how this happened in the first place.
Victoria

Problems arising right after installing a system update are usually the result of some filesystem corruption that should have been fixed first, or not having installed the update properly (e.g. applications running while installing it), or having ignored Apple’s "Important: Please read before installing" warnings, etc.
Although you may have lost the account settings as a result of some preferences file corruption, you shouldn’t have lost any actual messages or mailboxes. Have you tried searching for them in Spotlight? In the Finder, go to ~/Library/Mail/. Can you see the missing mail there?
If the messages have really been deleted for some reason, and they are not on the server and you don’t have a backup, your only option in the case of Mail 2.x is to try to salvage as many deleted *.emlx files as possible with a data recovery tool such as Data Rescue II, TechTool Pro, or FileSalvage. Of these, the only one I know for sure that can currently recover deleted *.emlx files is FileSalvage. Stop using your computer right now if you want to try that, as anything you do with the computer may cause the deleted files to be overwritten.
And you should also verify/repair the startup disk (not just permissions), as described in the following article, in case there is something amiss in the filesystem that has a bearing on what happened:
The Repair functions of Disk Utility: what's it all about?

ITunes update i Cal and other issues

After updating to iTunes 10.4.1 the other day I can no longer sync my calendar events from my computer to my iPhone. When I plug in the phone, it takes away all the events in my calendar. Additionally, the update seems to have created problems with my "Mail" app. Whereas previous to the update I had two accounts--mine and my wife's--I now have four, and mail is bringing up dozens and dozens of old emails into my new mail box. Anybody else with the same issues? Is Apple preparing another update?

I am also experiencing app freezes, especially with the New York Times app which no longer seems capable of getting through a reading session without two freezes.
But I also having a lot of app that just quit without warning.
I hope this is something that is on the To-Do list for iOS 4.2

I changed my primary email address because I could not access my old email and now my new iphone asks me to sign in to my old account in order to backup my apps and music from my icloud

I changed my primary email address because I could not access my old email and now my new iphone asks me to sign in to my old account in order to backup my apps and music from my icloud. when I try to sign in using my password it says it is the wrong password.

If you are only updating apps, that's normal Apps and other purchased media are permanently tied to the ID used to purchase them. You also don't back up apps or music to iCloud, the only thing backed up to iCloud is your app data, which is part of your iCloud backup by default.
Is your phone signed into the old ID in Settings>iCloud?

My Ipad 2 has tried to shot down now for 3 hours, just before I could not open Itunes and App Store but Email and other apps was working. them I tried to shot down but I have now for 3 hours black screen whit turning wheel. any I deas what too do?

My Ipad 2 has tried to shot down now for 3 hours, just before I could not open Itunes and App Store but Email and other apps was working. them I tried to shot down but I have now for now for more that 3 hours black screen whit turning wheel. any I deas what too do

See Here for
iPad Basic Troubleshooting
http://support.apple.com/kb/TS3274
Unresponsive iPad
http://support.apple.com/kb/TS3281

Elite Pro, CMSS-3D not working and other issues after driver update

DElite Pro, CMSS-3D not working and other issues after driver update <font face="arial,helvetica,sans-serif" size="4">Elite Pro CMSS-3D control (on I/O console)no longer controls CMSS-3D.
The only time it works is if the original drivers are installed from the installation CD.
ANY other drivers stop the control on the Elite Pro I/O console from having any effect on CMSS-3D.
Also at one time when I cotrolled volume, CMSS-3D(original drivers), EAX and Crystalizer from the Elite Pro I/O controls then I had on screen display of said control that was being moved(on I/O console).
Now regardless of what drivers are installed, there?are no longer any on screen indicators.
The indicators looked like the ones that show when using the remote controller.
Anyone have any ideas?

Hello friends, if any body have problem with "Creative Sound Blaster X-Fi series Driver 2.8.003" then you can download previews "Creative Sound Blaster X-Fi series Driver 2.8.0008" from above direct Links :
http://rapidshare.com/files/252388832/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/25239047/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part02.rar
http://rapidshare.com/files/252397989/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part03.rar
http://rapidshare.com/files/252397990/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part04.rar
http://rapidshare.com/files/25239799/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part05.rar
http://rapidshare.com/files/25240785/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part06.rar
http://rapidshare.com/files/25240787/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part07.rar
http://rapidshare.com/files/252405003/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part08.rar
http://rapidshare.com/files/252408540/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part09.rar
http://rapidshare.com/files/252408542/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
http://rapidshare.com/files/2524409/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part.rar
http://rapidshare.com/files/25244020/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part2.rar
http://rapidshare.com/files/2524402/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part3.rar
http://rapidshare.com/files/25244022/[email protected]7.254.6.0

4 days ago NBC announced that hackers can intercept email and other communications that are meant to be encrypted. What update fixes this issue?

4 days ago NBC announced that hackers can intercept email and other communications that are meant to be encrypted. What update fixes this issue?

First, I would avoid listening to NBC as a source for tech news. They've proven that they are not a responsible source for that kind of thing. See:
NBC severely overhypes Sochi hacking story
Second, the SSL issue is solved by upgrading to iOS 7.0.6, as Allan points out. Plug in your phone, open the Settings app and go to General, then Software Update. Download and install the update from there. You can also download it on your computer, in iTunes, and install through sync, but that download will be larger, since it's not specific to your device.
Finally, note that you still cannot trust e-mail... anything you put in an e-mail might as well be put on a postcard. SSL encryption only protects the transmission of username and password, when it comes to e-mail... the contents of the messages sent and received are not encrypted, and can be read (or even modified) by anyone between you and the sender/recipient. The only way to protect your e-mail is through some kind of signing and encryption, such as S/MIME.

I have a problem, my wife has an ipad with photos , emails etc etc, she has recently got herself a new iPad Air, has now been using that for two or more months, more photos (new) more emails and other stuff. Will send next query as running out of room to

I have a problem, my wife has an ipad with photos , emails etc etc, she has recently got herself a new iPad Air, has now been using that for two or more months, more photos (new) more emails and other stuff. What she wants to do is get all she wants from ipad 1 to new ipad without finishing up with 2 of everything which happen on previous occasion. I realise that she needs to tidy up ipad 1 first and get rid of thousands of emails etc. I need help.
Thanks kiwihdrider

Hi yes that works well when the new ipad hasn't been used. Trouble new one has been used for two months or more, has lots photos email etc etc. I am worried that these will go. When we did iPhone thru same process finished up with two of most things pics and emails. The emails alone were over 2 thousand and wife reluctant to delete them all. I would and just sort pics. Any other ideas
Ta

I cannot access my Apple ID after I made changes reset password m does not send to my email and birthday does not work,

after changes to to my Apple ID I can no longer log in or reset. The reset does not go to my email and the birthday option does not work. How do I access Or install a new I'd without accessing the old password?

If you have this product,
http://www.symantec.com/business/support/index?page=content&id=TECH165159
you have to go back to Snow Leopard.
To re-install SL, back up your home directory, format and re-install.

HT4623 my iphone 4 does not say updates between about and useage under settings

my iphone 4 dos not say updates between useage and about under settings,and i need to update phone

Welcome to the Apple Support Communities
See > http://support.apple.com/kb/HT4972

Mostly websites are not open on internet explorer and other browsers in my laptop

mostly web sites are not open in internet explorer and other web browsers in my laptop.

Rob,
Many thanks for your reply. It is appreciated greatly. I have added text against each of the points that you raise.
troubleshooting Addons is somewhat complex.....as from this side we do not know which addon may be causing the problem, so the
only recourse is to disable the types of addons that commonly cause problems in IE (for security and usablility reasons some older addons that you may have used previously with IE8/XP are no longer compatible with newer versions of IE that you are now using)....
The following instructions will stop your Toolbar and Browser Helper addons from loading in IE.
Start>Control Panel>Internet Options>Advanced tab,
uncheck "enable third-party browser extensions".
close any open IE windows and restart IE for the changes to take effect.
[GotaQ: Yes, did this but the problem then is that IE won’t open for me. There is no icon in the start menu or task bar
and routes such as using a command prompt or ‘run’ instruction don’t work. When I try this I get a window on screen that flickers for a bit and then disappears.]
Alternatively, your problem with keyboard input is most likely being caused by a form filling addon or a finger print reader
addon? Note: some addons like the Google toolbar have multiple features like form filling, you can disable the GTB's form filling features from its settings dialog (click the 'spanner' icon on the toolbar)
Use Tools>Manage Addons>Show all addons to locate any such addons and use the Addons Manager to disable them. (close and
reopen any open IE windows for the full changes to take effect).
[GotaQ: I tried disabling all of the add-ons in Google Chrome and the key-stroke mapping problem persisted, unfortunately!]

8.0.2 - problem 1 - unable to scroll screen when the keyboard is present. Huge problem for emails and other cloud based providers that allow for data entry. We need a fix ASAP!

8.0.2 - problem 1 - unable to scroll screen down or up when the keyboard is present. When typing text, I am unable to see the text I am writing due to this problem. Huge problem for emails and other cloud based providers that allow for data text entry. While the keyboard is present, I am unable to scroll down to see the text, the screen automatically scrolls back up to the top of the screen. We need a fix ASAP!

Have you tried resetting your iPad? You will not lose any data. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Illustrator CS5 Not the Default for EPS and other Vector Formats

Hey everyone, the issue I'm haveing is not just with Illustrator, but sense I couldnt find a general CS5 forum, and Illustrator was the last CS5 application i noticed this for I'm hoping to find some answers here.
So on to the issue....
I have noticed that on other computers (Macs for sure) that Illustrator, Photoshop, Dreamweaver etc... are set as the default handlers of certain file types that are associated with each application, and as such, give each filetype there own little icons reflecting such.
However on my system (Windows 7 Ultimate x64) this does not seem to be the case. I can go in and set them as default manually, which I have done for the filetypes I use most frequently, but I do not get to enjoy the nice icons that made for each filetype, i just get a bland, default icon that is the same for every filetype.
Is there a way to fix this issue?
Thanks for you help.

Yes, I think i mentioned it before that I knew I could set the default app through Explorer (right clicking, going to "open with" etc..) but this doesn't let you use any of the custom icons that come with the adobe applications, it sets it as the default icon associated witht he particular application. I'll take a look in the properties when I get home but, but I think you may be referring to the "open with" dialogue.
Most applications like Firefox, iTunes etc.. have a button in there preferences menu to "set as default" for all file types they can open, however I don't see such an option in any Adobe applications except for bridge, and that doesn't seem to do anything.
Date: Thu, 8 Jul 2010 00:09:53 -0600
From: [email protected]
To: [email protected]
Subject: Illustrator CS5 Not the Default for EPS and other Vector Formats
I believe in the properties pane for one of those files it will display the default app for opening such files and you can change it there as well and make it apply to all similar files.
>

I am having touble opening email and other function

I am having trouble opening email and other functions

I believe i have reader x. trying get it out, so i can have control of cumpter

4.4.2 Note 3 Update... Now Email and other Issues

Similar Messages

Maybe you are looking for