4.4 update doesnt show the Fuji x pro 1 camera for lens adjustments etc

Looking forward to this update because i use a Fuji X pro 1 and I had read that lightroom 4.4 now supports this camera and sensor.
However after updating all I get in the Lens adjustment under Fuji is the Fuji x100 which has been their for some time.
The exif info is showing the correct camera and lens used etc.
I have tried uninstalling and then manually removing any left over files and folders with no luck.
Do i have to install support for this camera as an addon?
Also if i look in the lightroom folder Camera profiles/camera it only lists Canon, Nikon and Sony
Any ideas.?
Thanks all.
Mark C
Message was edited by: Mark Candlin

The location you describe looking in has camera-match raw-sensor profiles for the three brands you mention plus a few for Leica and Pentax, I think.
The Adobe Standard peer folder of the Camera folder you mention has the raw-sensor profiles for each camera that Adobe supports which and is where you’ll find your Fuji raw-sensor profile.
Your question seems to be about a lens-profile, though, not the raw-sensor profile and those profiles are up one more folder and down into the LensProfiles folder area.
There aren’t that many brands of camera-lens combinations supported by Adobe and the X Pro 1 is one that isn’t one that is supported by Fuji, and just the X100 is, which you’ve already discovered.
There are additional profiles that have been created by users such as yourself and published for other users to use that can be downloaded by the Adobe Lens Profile Downloader; however, there are none for the X Pro 1, there, either, so you’ll either need to create your own lens profile using the Adobe Lens Profile Creator, or wait for another user to create a lens profile, or do without.  This is the normal situation for most non-high-end cameras.
Adobe pays people to do things and prioritizes tasks, pruning ones that are “less necessary” or “less beneficial” using whatever criteria they have.  This is normal in a market-driven economy where there is always a balance between price and service.  If LR was twice as expensive, then Adobe might be able to provide more profiles, but there would be less Fuji owners buying it due to the higher price, right?  If the world economy picks up and more people buy Adobe products, assuming people still use PCs and Macs and not tablets, then there may be more money to throw at things like profiles for camera-xyz.

Similar Messages

  • I just purchased a MacBook Pro Retina. Checked my OSX and it is version 10.8.1... trying to find a way to upgrade to a higher version. In the app store it doesnt show the update nor downloading the new Mountain Lion OXS doesnt work. Please help

    I just purchased a MacBook Pro Retina. Checked my OSX and it is version 10.8.1... trying to find a way to upgrade to a higher version. In the app store it doesnt show the update nor downloading the new Mountain Lion OXS doesnt work. Please help

    hienn,
    Not yet. There was an upgrade page to 10.8.2 for the late 2012 models but it's down now. I have to assume that Apple pulled it because of some bugs. I would look for something next week, more likely than not. In the meantime, the OP should be good with 10.8.1 until the update shows up again.
    Clinton

  • The 10.7.4 update doesnt show

    I dont know why, but update manager doesnt show the 10.7.4 update for me, how come?
    im on 10.7.3 mac mini, nothing special...

    There's no update manager in Mac OS X, only Software Update. If that's not showing the update, then manually download the appropriate ones from http://support.apple.com/downloads/

  • Got big problem with my iphone , its not charging as it did before i updated (5.0.1) Now its charging very slowly and it doesnt show the charging sign on screen..

    got big problem with my iphone4 , its not charging as it did before i updated (5.0.1) Now its charging very slowly and it doesnt show the charging sign on screen..

    How do you know its charging very very slowly? Is the screen back on?
    Once a month you should charge your phone to 100% then drain it, then charge it back up to 100%.
    Just leave the phone in and do what is said above.
    How long do you think it will take to charge to 100%?

  • When the app is being downloaded it doesnt show the icon its like gray icon

    When the app is being downloaded it doesnt show the icon, its like a gray icon that appears... does that happen to anyone?

    Yes - did not used to happen this way, but started after one of the updates. Once the download completes, the 'regular' app icon should show up. Nothing to worry about.

  • AppBuilder Application doesnt show the output

    Hi All,
      I am doing the sample application in AppBuilder, when i run the application it opens a new browser window but it doesnt show the output.
    this is the problem, how to resolve this?
    If any body come across this issue please help me.
    Regards,
    Sravanya

    Hi Sravanya K,
    There seems to be some compatibility issue with latest Chrome update. (All the other pre requisites have nt had any releases very recently)
    Last release of other Pre requisites :
    Node JS - 5th june 2014 ( Node.js ChangeLog )
    JDK - (its to be manually updated).
    APP Builder (appbuilder-1.0.1252.zip is the last release which happened a long time back )
    Google Chrome - Can find latest release logs in Chrome Releases and chrome has an Update almost everyday
    UI5 Liraries - As per OpenUI5 - Download  16 th July 2014 is the last release of Ui5 libraries.
    More over App builder does not need any internet connectivity to atleast run the sample applications / templates of SuperList,Chart. (so the issue might be internally in the system using these pre requisites )
    So i certainly doubt the Auto Update feature of Google Chrome , causing this issue.
    Though this currently have nt worked in latest version of chrome in my system , other major browsers are still supported .
    As a work around can suggest to work with other browsers.
    I also tried with Safari , Firefox and  safari  worked satisfactorily -
    (Chrome, Safari are recommended for App Builder ) (Firefox worked partially)
    attached is the screenshot of Sample Application running in Safari
    Regards
    Virinchy

  • In column Chart when Y values are grater than y linear axis maximum it doesnt show the Bar

    Hi Guys,
    In column Chart when Y values are grater than y linear axis maximum it doesnt show the Bar.But i want show the bar upto the max limit of y linear axis without changing the max limit.
    Consider following example:
    Y values are 80 90 200 300
    and following are the output :
    Left:When i am not setting maximum property of linear axis.
    Right :When i am setting maximum property of linear axis to 200.
    In right 4th bar is not visible bcoz value for that bar is 300 which is excedding  maxium.But i want the 4th bar to appear same as 3rd bar.
    How i can do this?
    Thanks in advance.

    Are you going to show the bar going past the maximum value?
    If not, then you should change the Y value when entered into the array to the maximum value allowed. i.e.
    if(itemYValue > maxAllowedValue) {
         itemYValue = maxAllowedValue;
    Where maxAllowedValue is a variable you set on the application to control the maximum value for the chart.
    This is assuming that you are loading the values into an Array before updating the chart dataprovider with that array.

  • HT203421 i buy a macbook air with my friend and i changed the apple id also.at first i can update the application but now its impossible to update the application.when i clock to update it shows the id of my fren andsomebody do you have idea to solve this

    i buy a macbook air with my friend and i changed the apple id also.at first i can update the application but now its impossible to update the application.when i clock to update it shows the id of my fren andsomebody do you have idea to solve this problem.

    The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
    1. You don't own another Mac.
    If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
    If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
    To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
    If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
    2. You do own another Mac.
    If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
    Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
    After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
    Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
    If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
    If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to  authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.

  • I just downloaded itunes 11.. and now i cant find out how to display duplicates and also it doesnt show the total amount of songs in my library...anybody know..???

    I just downloaded itunes 11 and now i cant find the display duplicates..and it doesnt show the total amount of songs in my library..anybody know..??

    Two Windows scripts to make playlists of Duplicates and Exact Duplicates. Use shift-delete to remove selected tracks from the library as well as the playlist.
    There is also my DeDuper script if you don't want to do it by hand. Please take note of the warning to backup your library before deduping. See this thread for background.
    tt2

  • Report doesnt show the text for employee ids.....

    Hi guys,
    I am facing the following issue.
    We have a report which is fetching data from the infocube.Whenever we check the report we are facing the issue : report doesnt show the text for ~10 employee ids,its showing the key in both key and text columns, its showing both text and key for the remaining employee ids.We checked the master data for employee id and it contains master for the employee ids which are not displayed text in the report.
    Can any body help on this.
    Regards
    Prasad

    Hi Prasad,
    for your infoobject do you have all three texts available (short, medium and long)? Are all three loaded? You might have the wrong text displayed in your report. Check if you have the short, medium or long texts displayed. Dont forget to check the languages too ....
    Kind Regards,
    Alex
    Edited by: Alexandre Soares on Dec 2, 2008 3:33 PM

  • Ios 8 update doesnt have the option of switching between networks i.e 2G or 3G network..  pls rectify this issue

    ios 8 update doesnt have the option of switching between networks i.e 2G or 3G network..
    pls rectify this issue

    Why don't you ask your best friend to rectify the issue?  Oh, your best friend isn't Apple?  Well neither are the users on this forum.  APPLE IS NOT HERE

  • Conversation doesnt show the latest message but an old one.

    Each time i click on a conversation in Mail, it doesnt show the latest message, but on old one. Changing the settings to 'place latest message on top' (sorry don't know exactly how they have translated this, I am running Dutch version) does not fix this.
    If you change the settings to 'place latest message on top'. It does place the latest message on top, but it shows an old one. So each time i click on a conversation, i have to scroll to the top to see the latest message. This is very irritating. I already answered several old messages. People think i am getting ********...
    I am using Mail in classic view! Changing it to the new view, doesnt fix it either.

    Hey Olivia,
    If you are having an issue with your iPhone only showing the most recent message of a conversation in the Messages application, and you have already tried restarting and resetting the iPhone, the next thing to try would be to back up any data on the iPhone, erase it and set it up as a new device. See this article for directions -
    How to erase your iOS device and then set it up as a new device or restore it from backups
    Thanks for using Apple Support Communities.
    Happy computing,
    Brett L 

  • When I boot up my iPhone 4S it shows the Apple icon then goes black for over 30 seconds.

    Why does my iPhone 4S, when I turn it on in the morning and it shows the Apple icon, turns complete black for over 30 seconds before I can swipe and log in? This started happening when I upgraded to iOS8

    Hi Haleynichole_99!
    I have an article here with some troubleshooting steps that can help you resolve this issue with your iOS device:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • I have an app update on my phone through the app store, but i dont have that app and when i hit update it says the item is no longer available for sale,, but i cannot get rid of the little 1 at the corner of the app store app,, how can i get rid of it

    i have an app update on my phone through the app store, but i dont have that app and when i hit update it says the item is no longer available for sale,, but i cannot get rid of the little 1 at the corner of the app store app,, how can i get rid of it,, i have iphone 5

    You installed a hacked app, originally from the Mac App Store. It contains the receipt for a different app, downloaded using an account that you don't control. You need to identify and remove the hacked app.
    Important: The app you need to remove is not necessarily the one named in the App Store notice. For example, if the App Store says you need to update "Twitter," the hacked app may be "Angry Birds" or something else entirely. Don't make any assumptions about which app you're looking for. To find it, you have to carry out a systematic search.
    Triple-click anywhere in the line of text below on this page to select it:
    kMDItemAppStoreHasReceipt=1
    Copy the selected text to the Clipboard (command-C).
    In the Finder, press the key combination command-F to open a search window, or select
    File ▹ Find
    from the menu bar. In the search window, select
    Search: This Mac
    from the row of tokens below the toolbar. Below that is a popup menu initially showing Kind. From that menu, select  Other...
    A sheet will drop down. In that sheet, select Raw Query and click OK or press return.
    Now there will be a text box to the right of popup menu. Click in that box and paste (command-V).
    The search window will show all the App Store products you've installed. Compare those search results with the list of your purchases from the App Store. To see the complete list, you may need to unhide hidden purchases. If any apps were download from the App Store using other Apple ID accounts that you control, sign in to the store under each of those ID's and check the purchases.
    At least one of the items listed in the search window is not among your purchases in the App Store. Move each such item to the Trash. You may be prompted for your administrator password. Empty the Trash.
    Log out and log back in. Test.

  • TS4268 iMessage doesn't work anymore suddenly. It claims that my apple id had changed, which isn't the case (App Download still working!) . Then it shows the correct Email-adress and asks for appleID password.

    iMessage doesn't work anymore suddenly. It claims that my apple id had changed, which isn't the case (App Download still working!) . Then it shows the correct Email-adress and asks for appleID password. After entering it switches to a mask witch asks for the eMail adress that should be used. There is the right One already preentered. From there it switches back to the former mask (appleID +password) and nothing happens. If you say Log in again, ist just switches between those masks without showing an error claim nor logging in. Strange thing is ist worked proppperply till a few days ago.......

    Hello there Noregret35,
    I suggest this part of the iPhone Troubleshooting Assistant found here http://www.apple.com/support/iphone/assistant/phone/#section_1
    If you get to step 3 I recommend closing ALL the apps.
    Here is step 1 to get you started.
    Restart iPhone
    To restart iPhone, first turn iPhone off by pressing and holding the Sleep/Wake button until a red slider appears. Slide your finger across the slider and iPhone will turn off after a few moments.
    Next, turn iPhone on by pressing and holding the Sleep/Wake button until the Apple logo appears.
    Is iPhone not responding? To reset iPhone, press and hold the Sleep/Wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears.
    If your device does not turn on or displays a red battery icon, try recharging next.
    Regards,
    Sterling

Maybe you are looking for