4.4 Update on Maxx breaks Exchange Server sync

Updated the Droid Maxx that I got for work.
Problem is, there's a "security update" that was needed - specifically a corporate requirement for SD card encryption.
Problem is, there's no SD card for this phone.
Corporate will NOT change policy due to legal reasons, especially since other phones still use SD cards.

Traumadog wrote:
Yea - make a new policy for one phone affected by this? 
I asked, they said no...  and that I could get a third-party app, like Touchdown, or trade it for an iPhone.
Surely there are other devices on your company exchange with the capability to use the SD card.

Similar Messages

  • FRG22D Breaks Exchange Server Sync!

    Ok so after FRG22D I can no longer connect to exchange or for that matter even set it up again. System FC on setup. So  I called motorola and they told me it was a certerficate issue and would need to be patched but they had no ETA nor did they commit to doing anything about it.
    Verizon told me to take the phone to the store and roll back the update. But the store has no way of doing so. So at the moment the only options seem to be the crapy app touch down and pay 20 bucks for it or the slightly better working but REALLY slow roadsync to get my work email and calendar. Who do we need to call at verizon to preasure them to get moto working on this asap?

    Traumadog wrote:
    Yea - make a new policy for one phone affected by this? 
    I asked, they said no...  and that I could get a third-party app, like Touchdown, or trade it for an iPhone.
    Surely there are other devices on your company exchange with the capability to use the SD card.

  • Installing Update Rollup 7 for Exchange Server 2010 SP3

    Hi,
    I have 4 Exchange servers. Two CAS and two DAG. I am currently on Rollup 2 for Exchange Server 3010 SP 3. Can I install Update Rollup 7 for Exchange Server 2010 SP3 or do I need to install a previous one first?
    Thannks!
    Wave~Chaser

    Hi,
    When I try to install Exchange 2010 SP3 roll up 7, am getting the below error:
    The upgrade cannot be installed by the Windows Installer service because the program to be upgraded may
    be missing, or the upgrade may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade.
    and please find below event log:
    Product: Microsoft Exchange Server - Update '{A93DA06F-A5B8-4DF8-8B3F-B285E014C659}' could not be installed. Error code 1642. Windows Installer can create logs to help troubleshoot issues with installing software packages. Use the following link for instructions
    on turning on logging support.
    Can you please help me with this error.
    Thanks

  • Exchange 2010 update after Update Rollup 5 for Exchange Server 2010 (KB2407113)

    Mine exchange server 2010 standard has Update Rollup 5 for Exchange Server 2010 (KB2407113) as latest update.
    Can someone help me which update i can install after this, can i start with
     Update Rollup 1 for Exchange Server 2010 SP1.
    Many thanks in advance

    My recommendation will be:
    Remove update roll-up 5
    Install SP1 check that everything is working
    Install SP2 check that everything is working
    Install SP3 check that everything is working
    I think it will be risky for you to go straight to SP3.
    Exchange Blog:
    www.ntweekly.com
    MCSA, MCSE, MCITP:SA, MCITP:EA, MCITP:Enterprise Messaging Administrator 2010,MCTS:Virtualization

  • Corporate Corporate Exchange server sync contact issue

    Corporate Corporate Exchange server sync procedure works as it should except : When I go to Contact Groups menu all of my contacts from the exchange server are now at the top, in the 'Not Assigned' area. For normal contact use this does not seem to be a problem for phone or email. But when I try to set up a group, under 'Corporate', only a random couple of the 671 contacts are available. How can I do a sync so that the contacts appear under 'Corporate' or 'Phone', when in the Group menu, or move them down to this area?
    Thanks in advance for help,

    I ended up using the column view trick.  Column view -> sort by email address -> click & delete every "[No email address found]" entry.  In my experience, I've found that just putting in the digital elbow grease takes less time than using things like scripting.
    I'm just sad that these things don't get designed well to begin with.  I've got other very basic gripes about the Pre.  I'm told it works much better with a Google account.  I'd love to jump on that bandwagon, but work is using Exchange.  You simply must must must work with Exchange sever since so many big corporations have drunk Bill Gates' Koolaid.  But to provide buggy Exchange compatibility is risky, even moreso when your company's future depends on the success of your current device.
    Palm is clearly getting into bed with Google at the expense of Microsoft.  I suppose that's the way I'd go too, but for the time, Palm's buggy Exchange support sets up RIM to keep running the table with Blackberrys.  If they had just done Exchange right, they would have double the sales they have now, and Apple and RIM would really have something to worry about.

  • Update Rollup 7 for Exchange Server 2010 Service Pack 3 (KB2961522)

    This rollups will not install and has caused multiple issues on the Windows SBS 2011.
    The issues are as follows:
    All Exchange and related services were stopped and had to be manually restarted.
    The update fails for multiple reasons, changes every time.
    I am no longer able to perform ANY updates without some sort of error code.
    All Domain client computers now report Security Status as Critical, Servers as not available.
    DNS does not appear to be properly, many internet requests from domain PC's stop with "Fix connection problems" error page.
    Running BPA shows no major issues
    I can no longer run the WSUS server cleanup. I get a Connection Error and have to reset the node, but it soon fails again.
    Shared folders may take quite a bit of time to open.
    Any help would be greatly appreciated. I do have an open ticket with Microsoft and although this is rated critical I am not getting any resolution. The only thing that MS support managed to do was bring the server down for an additional day and corrupt my
    EDB files so that they had to be rebuilt. 

    Hi,
    à
    All Exchange and related services were stopped and had to be manually restarted.
    While the update was installed, it will automatically stop Exchange and IIS services. You may need to restart
    manually.
    àThe update fails
    for multiple reasons, changes every time.
    à
    I am no longer able to perform ANY updates without some sort of error code.
    Would you please let me know any of those
    update-failed reasons? Meanwhile, please let me know some error code that you can get when can’t perform updates. Meanwhile, please refer to installation suggestions and tips in following article when install this update rollup.
    Exchange
    2010 SP3 Update Rollup 7 released and installation tips
    Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
    does not guarantee the accuracy of this information.
    àAll Domain client
    computers now report Security Status as Critical, Servers as not available.
    àDNS does not
    appear to be properly, many internet requests from domain PC's stop with "Fix connection problems" error page.
    Please check if ping the SBS server successfully from the problematic client computer via server name and ip
    address. In the SBS 2011, can you access
    internet successfully? In addition, please select a client computer as a test machine, re-join it to the SBS network, then check if Security Status still report as Critical. Please also run Fix my network wizard in SBS console. Any find?
    Meanwhile, please refer to following article and check if can help you to
    repair Windows Server Update Services.
    Repair Windows Server Update Services
    By the way, did you have a good backup for the server?
    If any update, please feel free to let me know.
    Hope this helps.
    Best regards,
    Justin Gu

  • Security Update 2008-007 and Exchange Server Problem

    At work I access an exchange server using Entourage 2004 under Leopard 10.5.5. I just installed the 2008-007 Security Update and now I can no longer connect with the exchange server. Other network services are working, just can't access exchange. Oddly, I am also unable to access the my work mail using Outlook Web Access (OWA) in Safari, but it works in Firefox. Has anyone else run into these problems? Any advice? Thanks.
    M. Ward

    Hi,
    I'm having exactly the same problem at work. We use a Microsoft Exchange Server 2007 here and I can't connect to my folder in the server since yesterday, either on my desktop iMac and on my MacBook. When I click on the server icon I have for a long time in the dock, after sometime waiting I get the message "Connection failed-Maybe the server doesn't exist......". I also tried through the "connect" icon in a Finder window and even changing the server adress to smb://nameoftheserver doesn't work.
    I don't have the OWA problem since it works with https:// and not with http://
    Hope somebody can help us.
    Ansumane

  • A list of files changed for Update Rollup 4 for Exchange Server 2010 Service Pack 3

    Hi.
    Is there a list of files changed for Rollup 4?
    After our RollUp installation, some files in the BIN directory still has the date of 2/5/2013 (SP3, no RollUp4), some has the date of 6/13/2013 (RollUp4)
    Despite RollUp4 looks like to have been installed, Exchange Server still reports it's running "Version 14.3 (Build 123.4)"
    Thanks...

    Hi,
    After you install an update rollup for Exchange 2010, the version of Exchange Server isn't updated to show that the update rollup is installed. This issue occurs because the version number that is displayed by the Exchange Management Console or by other
    administrative mechanisms is obtained from the Exchange Server Object in Active Directory.
    If you want to get the latest version of Exchange server, the article Andy provided is a good way.
    Best regards,
    Belinda
    Belinda Ma
    TechNet Community Support

  • SBS 2011 - Update Rollup 6 for Exchange Server 2010 Service Pack 2

    I wonder if I have to install this rollup, since the server is already up-to-date using Windows Update? The KB article (http://support.microsoft.com/kb/2746164/en-us) doesn't mention that.
    In this article, under 'Prerequisites' it says you have to "remove all interim updates". What updates are they?
    Simon

    Firstly, I will do an introduction of interim update.
    An interim update is a fix that resolves a problem that is considered critical to the functioning of Exchange. It is built specially for a particular service pack and Rollup. This means internally there could be loads of interim updates for a particular fix.
    If you have multiple problems on a server that requires interim builds, you cannot just add a second interim build. You can only install one interim update per server. You have to get a combined interim build that included both fixes. Currently MS supports
    up to 3 fixes in a combined IU. The good news is that interim builds can be seen in Add/Remove in the control panel so you do not end up checking file versions.
    See more details in the following link: http://blogs.technet.com/b/mlines/archive/2008/12/30/interim-updates.aspx
    That is to say, the interim update is different from Exchange Rollups
    You don't have to unstall anything to apply this Roll Up. Rollup Updates are always important and should be applied. If you are running SP2 for exchange 2010 and if their a rollup available to install for exchange , my suggestion woiuld be to install as it
    will keep your exchange server upto date.

  • Yosemite upgrade breaks exchange calendar sync

    Since my Yosemite upgrade on my mbp my calendar entries are not syncing to my corporate exchange server.  Mail is working fine. 
    I have noticed that when I receive a calendar invite and accept it in mail it remains in my inbox for a much longer time than it did under prior os/x versions.  Eventually the invite does move to trash.  However, the invite never shows up on my calendar.  Additionally, if I create a calendar event others do get it.  If I modify an existing calendar event it does not move on my calendar but others get the updated information. 
    I have tried various solutions offered in several forums but none has worked.  Removing and adding the account back does nothing.  There were notes about a time zone cache but I've not found that.  I've asked our crack IT department what they changed and they claim no changes were made. 
    Anyone have any good ideas otherwise I'll have to revert to the dreaded outlook app.

    I've seen this issue a bunch of times where I work. It basically it works like this:
    If one of your folders in Exchange has a or more corrupted item(s) in it the whole folder will not sync. So, it's an all or nothing thing. with the iPhone.
    Easiest way to test this would be to move all items out of the Calendar (for example) and create a new appointment. If you see the new appointment in your calendar after refreshing then you know you have a corrupted item somewhere in your real data.
    The tedious way I found around it is to move everything out of the folder Calendar, in-box, contacts, etc. and slowly move them back in a little at a time while refreshing the connection on the iPhone by turning the option on or off for either the calendar, contact, etc. until you find the corrupted item(s).
    It is a serious pain but that seems to do the trick. Apple needs to create a tolerance of corrupted items in their code for the iPhone for this issue to go away.

  • Get contacts of iPhone (Exchange server sync)

    Hi,
    I recently left my old job to start a new one. I have my iPhone setup to syncronize all my emails, contacts and calendars with my old companys Exchange server.
    My account on their Exchange server has now been disabled and I no longer have access to my old work PC to export my contacts as a PST.
    How can I get my contacts of my iPhone (must be cached I guess) onto my PC so that I can add them onto my local copy of Outlook and then setup my iPhone to syncronize from my personal laptop?
    Best Regards
    Fredrik

    No way that I'm aware of, which is how most companies that provide an Exchange account want it. There is not a way to sync contacts being synced over the air direct with a supported address book application on your computer via the iTunes sync process.
    You can check if the Exchange contacts synced over the air are available with your iPhone's backup on your computer which is updated by iTunes as the first step during the iTunes sync process. There are a number of utilities that provide for extracting select data from your iPhone's backup for access on your computer. Here is one.
    http://mobilesyncbrowser.com/

  • N70 Exchange Server Sync

    Hi,
    I read that Nokia have licensed Activesync to allow business users (e.g. Me) to sync their N70 devices with an MS Exchange Server. Does anyone know what the status is of this? All I can find on Nokia.co.uk is a year-old press release...
    In the interim, does anyone know how I can sync my N70 with Exchange?
    Thanks in advance...
    neil

    Nokia has, indeed, licensed the ActiveSync technology to talk directly to Exchange servers. However, no phones with support for it has been released by Nokia yet (in any case, I would look for that support to first appear in Eseries devices like the E61 or E70).
    In the meanwhile, you can synchronize with an Exchange server through a local synch with a PC (Outlook) using PC Suite:
    http://www.nokia.com/pcsuite
    A remote (over-the-air, OTA) synchronization is also possible, if you have a, so called, SyncML Server connected to/with your Exchange server.
    DataViz is also adding support for S60 devices (like the N70) for their RoadSync product:
    http://www.dataviz.com/solutions/enterprise/roadsync/supported_devices.html
    Nokia Business Center also allows Exchange server connectivity OTA:
    http://europe.nokia.com/nokia/0,0,77174,0.html

  • Failed Exchange Server Sync Question

    Hi all my exchange server has failed so had to replace it which I have now done but im unsure about the phones. All the users phones still have the contacts and emails on but there Outlooks are effectly blank.
    If I sync the phones will I loose all the info on the phone as it will sync with the blank mailbox or will it copy all the items from the phone to the mailbox?
    Any help would be great.
    Thanks

    Mailboxes and email are completely separate from contacts.
    When a connection is reestablished with the Exchange Server, if the same messages on the iPhone that are available in what was the server stored mailboxes with the server that failed are not available with the new server - no backup of the server that failed is available, all messages on the iPhone will be lost. What is available at the server takes priority in this situation.
    The same applies to contacts.

  • Exchange Server Sync issues...

    Hi folks,
    I have a problem that has been discussed in abundance right now. How ever, I dare posting it because none of the methods described have helped me to get the exchange stuff running.
    I have an iPhone 16 GB 3G with 347 firmware.
    An iMac 2,8 Ghz with 10.5.4. and Entourage
    A MacBook 1,83 with 10.5.4. and Entourage
    An HTC Kaiser with WindowsMobile 6.1 professional
    A Dell Vostro1710 with Windows XP Pro SP2
    On all those devices I can access and work with the SBS2003 Exchange Server, except for, drums please: the iPhone.
    As I am at the same time the admin of our little Network, I would be able to change all settings, but still I can't get it done. Information so far:
    OWA: https://mail.mycompany.com/exchange
    Server: mail.mycompany.com
    e-mail: [email protected]
    User: Rene
    Password: gofigure
    Domain: mycompany.local
    No SSL or other certificates employed.
    When I set up the account and enter the information above, a window comes up saying that the certificates on this page could not be verified. I accept this window. Then comes the Dialogue asking for the server, which I enter as above. Then the same window comes up again stating that the certificates could not be verified and again I accept.
    Then it says "Account verified" and shows me the choices what I would like to sync with Exchange. As of now I would be happy if it only did e-mail (and I don't want to mess up my main calendar on MobileMe), so I unselect the others.
    I click on save and switch to the mail app, which is: right, empty...
    It makes no difference if I enter the Username with or without the domain as indicated in gray. It just won't work.
    What am I missing here? Since there are apparently plenty of users who can get it to work... And I am now trying for the umpteenth time that even my patience is coming to an End.
    Cheers,
    Rene

    Hi guys,
    I, too, am NOT a tech guy though I do administrate a bunch of different networks. I've been reading these forums for the past week or so and are also trying to connect my iPhone 1st gen. to our Exchange server. I haven't succeeded yet but if we put our heads together I think we can accomplish this
    First, let's get the details on the "table"
    My setup is like follows:
    - Single server setup (Windows 2003 Standard SP2 / Exchange 2003 SP2)
    - OWA enabled (SSL by GoDaddy)
    - Active Sync (supposedly working)
    - Firewallports opened and NAT configured accordingly
    As to my knowledge there seems to be NO "straight-forward" way of configuring an Exchange server, hence all the different setups we've seen on these forums. Something works for some people and some things does not.
    Now, for the details we have to put in in the on-screen guide (on the iPhone) the following applies to me (at least I think so):
    E-mail: [email protected]
    User: domain\loginname *
    Password: myPassword
    Server-name-field now present and:
    Server: company.com (<-- No HTTP or HTTPS) **
    +* Domain name is "something.local" but I've read somewhere that we should use the NETBIOS name. Can't back it up though since I forgot the link.
    ** I've read more than one place that the server name is the "Active Sync Server" and NOT the OWA (like Entourage) or the FQDN like Outlook+
    When entering all of these details I STILL have nothing showing up anywhere (in mail, calendar or contacts). But I see no errors or warnings of any kind.
    I've tried to add a new virtual directory in IIS and edit the reg-base ((with no luck) - I've tried to setup the correct permissions on the different virtual directories in IIS (and with no luck). I do, however, think THIS is where the "gold" might be - a good place to start. Permissions of the virtual directories on the ISS.
    What do you guys think?

  • DPM 2012 R2 Rollup 4, Update Rollup 7 for Exchange Server 2010 SP3 backups with eseutil check fail

    Hi,
    It could be a coincidence, but ever since installing Update rollup 4 onto DPM 2012 R2, (which was at UR3 I believe) I haven't been able to complete an Exchange express full backup or consistency check with verification using Eseutil checked. If I have the
    eseutil check enabled I get the following error:
    Type: Consistency check
    Status: Failed
    Description: Data consistency verification check failed for LOGS of Exchange Mailbox Database Mailbox Database 2011112513 on SERVER.xxx. (ID 30146 Details: The process cannot access the file because it is being used by another process (0x80070020))
    Disabling the eseutil verification allows it to succeed, but I'm not happy to continue with that for too long.
    I've had this running for many years and this is the first real issue with exchange, its a single stand alone exchange database.
    Any ideas?
    Thanks,
    Andreas

    Andreas,
    the error is stating that something else has a handle to a file or files during the ESEUtil check.  Typically this is AV.  I have also seen where the Exchange limits are exceeded and that causes the issue. 
    Please ensure you have the DPM AV exclusions for the DPM server and I would advise the DPMRA.exe on the PS.  You can also trying disabling or removing AV as a test.
    DPM AV exclusions -
    http://technet.microsoft.com/en-us/library/hh757911.aspx
    You may also want to test using eseutil against the logs outside DPM and see if that fails with similar issue.  Let us know.  Thanks
    Regards, A.Nadar, This posting is provided &quot;AS IS&quot; with no warranties, and confers no rights.

Maybe you are looking for