4.5 BETA VERSION For The 8830

I found 4.5 for the folks that wanted to update the firmware on there 8830. Be aware it a BETA, try on your on risk. Tell me if it work or not so I can keep hosting it or take it off the server.
[removed third party link]
Message Edited by dany_s on 01-04-2009 08:07 PM

That's a pretty old beta (.51 was out a long time ago, .101 is the most recent "common" beta" right now). .51 was followed by .66, .77 and then .101 (I've used them all and they've gotten progressively better).
RIM gets pretty choked when betas show up on other Boards. I don't think they'd take too kindly to it being on their own.
Message Edited by celly on 01-04-2009 06:59 PM

Similar Messages

What was the last firmware version for the Zen Micro before M

I would like to know what was the last firmware version for the Zen Micro before the MTP firmware?
Please make sure you are 00% on this.
Thankyou.

I think it does, but I'm not sure; since I wanted MTP, I only used .x firmware long enough to save the original Creative test files (with MediaSource, not ZMME) before upgrading to 2.x. And yes, I had to li've with 2..02's shorter battery life until 2.20.05 came out.
May I ask why you want to go back to .x firmware? The only thing that will get you is the ability to use it with Win98SE/2000/Me--but only if you can install Creative drivers on every PC you use it with. MTP requires WinXP SP or 2 and WMP 0, but doesn't need any Creative software at all to work. (Microsoft has made an MTP driver for Win98SE/2000/Me, but it requires customization and may not be supported by other software. I'm tinkering a bit with the customization part right now.)
There are other pitfalls in changing Micro firmware families, in either direction--you'll lose all the files on your Micro, you'll have to install a different ZMME (and I've heard non-MTP ZMME isn't quite as full-featured as MTP ZMME), and you'll need a new plug-in for MediaSource to work.

I would like to update my eMac from 10.4.11 to 10.6. How can I get this os version for the update?

I would like to update my eMac from 10.4.11 to to 10.6.x How can I get this os version for the update?

Highest an eMac can go is 10.5.8...
Leopard requirements/10.5.x...
    * Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
    * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
    * DVD drive for installation
    * 9GB of available disk space (I say 30GB at least)
Trouble is appl no longer sells it, you have to search eBay & such for the full retail version, not any grey Install Disc.
There are workarounds if the 867MHz is the only hangup...
http://sourceforge.net/projects/leopardassist/
List of Applications Not Compatible with Leopard...
http://guides.macrumors.com/List:Applications_Not_Compatible_with_Leopard
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 2GB at least)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.

Better use for the Lock Screen

Why isn't apple making a better use for the Lock Screen (or lets 3rd party apps to do it)?
Why can't we get a preview of our upcoming calendar events, get weather info and other useful information just by pressing ON.
every other smart phone has it. Ever the old Nokia smartphone has it.
So why aren't we?

duplikate2 wrote:
I personally will be going back to a blackberry if Apple doesn't fix this issue or allow a third-party app to solve this MAJOR ANNOYANCE!
Wow ... I am sure Apple will be in shock. They have only sold five million phones and obviously everyone has ben wringing their hands this glaring omission.
Seriously, tell Apple here http://www.apple.com/feedback/ as we are just users like you can can do nothing for you and your demands. And signing up for the Board just to say that was a waste of your time but it is of course yours to waste.
And, FWIW I am completely happy about not having my personal information on display on my phone.

What's the latest firmware version for the Xperia Tablet Z?

What's the latest firmware version for the Xperia Tablet Z?
According to the Swedish and British Sony website, the latest version for the Xperia Tablet Z is 10.1.1.A.1.253 released on 17th of May.
But this is the latest version for the Xperia Z (phone) not the tablet Z... Or am I wrong?
It's a bit confusing, when the manufacturer cannot keep track of the phone and tablet...
Solved!
Go to Solution.

Depends on if you have the WiF version or the LTE version. For LTE the latest is 10.1.1.A.1.253 and for WiFi it's 10.1.C.0.344.
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Will the be a Skype version for the Kindle?

Will you do a version for the new (or old) kindle device?
Solved!
Go to Solution.

There's a Skype version for the Kindle Fire HD. More information here: https://support.skype.com/en/faq/FA12157/how-do-i-use-skype-on-my-kindle-fire-hd
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Not able to see published task and not able to reset version for the task

Hi,
Created a task ,validated,by selecting the task clicked Publish button in tools to publish the task.
In Client Application(Callcenter) navigated Administration-Business Process->Task Deployment
Here not able to see published task to activate.
Tried twice by copying record but not able to see.
I am not able to reset version for the task created.
Could you please let me know how to overcome these.
Using sample database of siebel8.0.0.5
Thank you

Hi Dude,
To trobleshoot this you need to do the following steps:
1) cross check in tools the srf which you are compling , the same srf should be used by the clent application i.e. call center
2) the secound thing is in the Siebel tools there is a toolbar at the top, from where you have published the task, there beside you will find a button called Revise you can revise you task, first select task and click revise button.
3) and also you remember a task which you create is validated by right clicking the task record and choose validate.
4) remember, a task which you create should be registered same as like responsibilities, by navigating to Administration-Applicatrion > Task
Register the task with same name as you have used in Siebel Tools.
As, for best practices after creating a task first validate it, then after register it in Administration-Applicatrion > Task , then after toolbar there is a button callled publish and activate click that one .
and that's All.
Regards,
Neeraj Verma

Where it is the version for the Mountain Lion? / Onde está ????

Where it is the version for the OS X Mountain Lion ?
I can't make upgrade of my applicatory one? I am imprisoned in the passed one?
Onde está a versão para o OS X Mountain Lion ? Eu estou preso no passado ?

10.2 provided the most recent (and now desupported) version, for mac os 10.5. A version for Lion (note: not Mountain Lion) was planned but did not make it.
Perhaps a 11.2 version comes before year end, or it will be in shape of 12.1, some time after the main platforms get released after OOW 2012 in october.
Some clues exist in this thread:
Instant client 64 bits broken on Mac Lion - Any hope?

HT2188 list of software versions for the different iphone models

where can i find a list of software versions for the different iphone models?

Wikipedia has a list of the original and current iOS for each device
http://en.wikipedia.org/wiki/List_of_iOS_devices

Non riesco a ricevere acquisti fatti su itunes, mi da questo errore :erreu : you have an error in your sql syntax; checkthe manual that corresponds to your mysql server version for the right syntax to use near from news order by id desc at line. cosa devo

non riesco a ricevere acquisti fatti su itunes, mi da questo errore :erreu : you have an error in your sql syntax; checkthe manual that corresponds to your mysql server version for the right syntax to use near from news order by id desc at line. cosa devo fare? grazie

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

Is there a adobe reader XI version for the surface tablet. I recently purchase this to be able to s

is there a adobe reader XI version for the surface tablet. I recently purchase this to be able to sign contract and serfice request on the go without having to print and scan back in documents.

So it seems:
http://forums.adobe.com/community/adobe_reader_forums/metro?view=discussions

Windows 7 beta driver for the Creative N400

Hi everyone,
There is a Windows 7 beta driver for the Creative N400 speakers system.
Creative Speakers Beta Driver 1.02.000
Filesize : 24.68 MB
Release date : 13 Apr 09
File Name : USPK_W7DRVBETA_US_1_02_000.exe
This download is a beta driver providing Microsoft Windows 7 Beta support for certain Creative speakers. For more details, read the rest of this web release note.
Take note of the following:
* THIS IS AN UNSUPPORTED BETA DRIVER. There is no technical support for this driver.
* We recommend that only experienced users install this driver. Do not install this driver on a system used to perform critical tasks.
* Users who are looking for stable drivers should wait for the final release. When this happens, user should install the latest Creative driver available.
This download supports the following devices only:
* Creative N400
Requirements:
* Microsoft Windows 7 Beta
Notes:
* To install this driver
1. Download the .exe file onto your local hard disk.
2. Double-click the downloaded file.
3. Follow the instructions on the screen.

Sorry but this information is not available at this time. If there is any updates, you will see it in the announcement page.

Can the Aurora version be installed sperately from the beta version on the same computer?

I have the latest beta version installed on this computer. If I install the Aurora version will it replace my beta version? With IE10 it has a separate install as standard (Internet Explorer Platform Preview) and does not replace other versions of IE. Is Aurora like this or is it like a normal installation and updates the version already installed on the computer?

Do a custom install and install each version in its own program folder to use multiple Firefox versions.
* https://support.mozilla.com/kb/Custom+installation+of+Firefox+on+Windows
Create a new profile exclusively for each Firefox version.<br />
Create a desktop shortcut with -P "profile" appended to the target to launch each Firefox version with its own profile.
See these mozillaZine KB articles for information:
* http://kb.mozillazine.org/Testing_pre-release_versions
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox

Vista Beta Drivers for the Modem Blaster V.92 Serial DE5

I was wondering if there are any beta drivers available for the Modem Blaster V.92 Serial DE562? Thank You, Mike...

Holly cow... a v.92 modem! Christ that's from like, the 90's! You an old timer/ludite by any chance
You could probably get broadband for less.
Regardless, i very much doubt you'll ever find drivers for this piece of kit.
I think it's amazing creative have stated they'll develop Vista drivers for such old hardware.
If you're using the x86 (32bit) version of Vista then the Win XP drivers might work.
If, however, you're using x64 (64bit) you're stuffed. On top of that if you take a look at the manual selection bit down the bottom f the page on the left, you'll see Vista's just not a selectable option.
But it REALLY is time for you to jump on the broadband train man! Low end connections are so cheap and still would be a gazillion times faster than what you're currently using.

I am using Firefox 22.0 beta version.After the update everything is zoomed in.How do i revert this?

I have been using firefox beta versions mainly and before ver 22.0 pages displayed zoomed out as default with small text the resolution was that of my desktop at 1920X1080 it seems.After the update the text pages open zoomed in and dialog boxes bigger.Im very uncomfortable with this.Is there way to set all pages to open in a zoomed out format by default.

That is caused by code for HiDPI that landed.
You can modify the layout.css.devPixelsPerPx and increase or decrease the value in 0.1 or 0.05 steps to adjust the size of fonts and other elements in Firefox.
* The layout.css.devPixelsPerPx pref is a String value parsed to a float and allows to fine tune the dimensions of all elements (user interface and web pages) more precisely (resolution 0.1 or 0.05).
* You can use values between 0.05 and 1.0 to reduce elements in size or use values greater than 1.0 to magnify and make elements larger (percentage divided by DPI, % / DPI).
If the web pages needs to be adjusted after changing this pref then you can look at Default FullZoom Level or NoSquint.
* Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
* NoSquint - https://addons.mozilla.org/firefox/addon/2592
See also this MozillaZine forum thread.
Does Fx 22 nightly look too large?:
*http://forums.mozillazine.org/viewtopic.php?f=23&t=2678897

4.5 BETA VERSION For The 8830

Similar Messages

Maybe you are looking for