4.5 installation for the first time- so frustrating. I NEED HELP!

I just cannot install it. If I try from my berry, it says I do not have javascrip enabled. If I download the software, which I did, it downloads an then my computer restarts but I do not know exactly what to do next. I tried to find the program using my search button on my computer but it isn't found so I cannot even double click on it. HELP.
Solved!
Go to Solution.

Good luck, post back if you have further questions.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Encountered an error when attempting to open Lightroom for the first time. Went to Lightroom Help and searched for the error "An error occurred when attempting to change modules". Non of the solutions helped. what now?

Encountered an error when attempting to open Lightroom for the first time. Went to Lightroom Help and searched for the error "An error occurred when attempting to change modules". Non of the solutions helped. What now?

I am getting this error message as well. I have just downloaded Lightroom recently. I try to click on Lightroom / preferences....and nothing happens. I tried to uninstall and it is greyed out so I can't do that either. Suggestions? Please help?

I created a new apple ID for my iPhone, but when i go to activate iCloud (for the first time) it says i need to sign up with my old ID. How do I use my new one?

So I used to share an apple ID with my mom who also has an iphone, but i decided to make my own so that i could set up icloud with my mac. I created my own ID and activated it and all of that, but when i go to activate my iCloud, it tells me to check the email adress of the old ID. How do i activate it with my new ID?

Providing your Apple ID is not a .me or a .Mac address, you can change it with Apple and continue to use your account.
Start here, change your country if necessary and go to manage your account.
Once who have done this you can then correct it on your mobile device.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
When you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
If however, your Apple ID was a .me or a .Mac address, then you will need to create a new account, follow the instructions above for deleting your account on your mobile device and then tap the "create Apple ID" button to create a new account.

Does Roaming data syncs for the first time when app data are in download and installation process?

Hi,
I will store user Id in "HighPriority" Roaming data. When user will install app in another computer (with the same Microsoft Account), app will get user Id from Roaming data. Then I can implement all data sync over my cloud service.
There are 2 scenarios:
1. User downloads and installs app in another computer, but roaming data syncs/downloads for the first time only after several minutes -
It's bad for my app :(
2. User downloads and installs app in another computer and roaming data syncs/downloads at the same time (then I can get user Id immediately)
- Its great for my app :)
Which scenario is real in practice?
Does Roaming data syncs for the first time when app data are in download and installation process?

Umm no not that i remember. It just randomly started happening. I reformatted the hard drive for mac (journaled) but it was working fine since i did it until now

After downloading updates for the first time, i was asked to restart my mac. it starting writing configuring installation. the staus bar just showed a little and remained like that for more than 3 hrs. i tried several times wit no success.

after downloading updates for the first time, i was asked to restart my mac. it started writing configuring installation. the staus bar just showed a little and remained like that for more than 3 hrs. i tried several times wit no success. it has not updated my mac OS X 10.5.

My clean install worked out alright, although I don't think it really fixed anything, rather gave me a couple more days of use 'till I have to send it in. Someone please help my get it running properly again...

I am trying to intall iTunes for the first time on my computer/ windows 8. I can get through the installer, then at the end, i'm getting an error: 0x80071A3F ??? Please Help

I am trying to intall iTunes for the first time on my computer/ windows 8. I can get through the installer, then at the end, i'm getting an error: 0x80071A3F ??? Please Help

Hey 78463,
Welcome to Apple Support Communities! I didn't see that particular error message in any documentation, but issues installing iTunes are resolved a majority of the time by completing the troubleshooting steps in the following article:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Cheers,
David

I am trying to run my registered CS6 Design Standard programs for the first time after install. InDesign runs OK, but Illustrator and Photoshop will only run in trail mode. How do I activate those two?

I can't get my registered versions of CS6 Photoshop and Illustrator to run in full mode. I installed CS6 Design Standard online end of June (an upgrade from CS5.5), on my old MacBook Pro. I didn't run the programs then as I was waiting on arrival of new MacBook Pro. I migrated the programs from my old MacBook to the new, and today tried to run those programs for the first time. InDesign work OK (after an initial hiccup) but Illustrator and Photoshop will only run in trial mode, and won't let me save files. My CS6 Design Standard shows with it's registration in my Adobe Account. All seems in order, but Illustrator and Photoshop won't run in registered mode. Can you please help?

Demons1 in the future please only migrate your documents and settings.
Please use the uninstallers to remove your current installation. They are located in the Applications/Utilities/Adobe Installers folder. Once the uninstall is complete you will also want to run the CC Cleaner Tool. You can find more details at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.
If you need to download a fresh copy of the installation files for Creative Suite 6 you can do so at Download CS6 products.

Trying to use laf project for the first time

hi all , i need help , please
i am trying to use laf project for the first time as i said , and i want help on
the installation process
step by step please , i am soo junior here
i've just downloaded the zip file as the site said (http://fdtool.free.fr/LAF/doc/implementation.htm)
please go to this url and declare the steps to me
thanks in advance

The Forms Look and Feel Project is not an Oracle product. This product was developed by Francois Degrelle. Francois has posted numerous times in this forum that if you need help with the LAF you have to go to the Oracle Forms Look & Feel Project web site or his PJCs and Java Beans Forum for support.
Craig...

Newbee's question: Error connecting to the management server for the first time

Dear all, I am very new to the oralce world and got stuck today the first time I install oracle 8i on my win2k pro.
After the installation, I was trying to connect the Enterprise Manager Console for the first time, using the default user name sysman and password oem_temp (correct?). The problem is that I don't know exactly what is a management server, and what name it should be called. I named the database/sid name orarem, under D:\Oracle\admin\OraRem, does it have something to do with this issue?
I only installed the oracle enterprise server edition 8.1.6.0.0, not the Client part, will that matter if I only wanna run oracle on my stand alone desktop as a testing procedure for now?
Any help would be really appreciated!!

Bingo!! I had been trying dumping various .plist files
Not surprisingly i was a little hesitant about throwing the Airport folder in the bin.
First thing I did was to check it had been replaced on restarting!
Glad to say that "Check for updates" is now doing its thing.
I don't know why it gave me such grief, I just felt it could develope into something nasty down the line.
Thank you again.
Unfortunately they don't seem to have a points system for this topic.
Your fix should be available in Google from now on

HT4623 for the first time i bought this iPhone, i was enjoying it....i updated it with iTunes and suddenly message appear on my pc an error occurred.....n my phone is not working.... :-( what should i do?? m helpless...no support from ny side....

for the first time i bought this iPhone, i was enjoying it....i updated it with iTunes from older version to newer version and after installation when it was updating my iphone then suddenly message appear on my pc an error occurred.....n my phone is not working.... :-( what should i do?? m helpless...no support from any side....
and now its not even restoring back....showing me error's
m getting very irritated and unable to sleep jst because of all this crap....
instead i lost 1gb internet data in downloading the update

i tried restoring itz saying error occured 2008 :-(

System Failure while running Adobe Dreamweaver CS6 for the first time..Why?

When i downloaded the adobe dreamweaver cs6 and during installation ... there is no wrong except screen resolution (required = 1280*800 but available = 1330 * 768)
But when i tried to run the program for the first time, the system had failed.
Can you help me to know the true cause, please?
note: i use Windows XP sp1

CS6 requires a minimum of Windows XP with Service Pack 3. Your vertical resolution also does not meet the minimum requirements.

Installing SAP B1 for the first time

Hi all i`m trying to install SAP B1 client side for the first time in my computer
i get the Install Shield status bar that preparing for installation but afterwards nothing is happening. after i`m closing the program with "Task Manager" (of windows XP) i`m getting an error msg "1628: Failed to complete installation".
I dont know what is the problem
i`ve on my computer several of DB`s such as DB2, DB2/400, MS-SQL, MySQL, Oracle and btrieve.
I hope someone can help me...

Hi Mark,
Yes, I did visit you guys in Israel a couple of months ago. I hope all of you are doing well.
Is there another computer on your network that has more or less the same configuration as yours? Same databases, etc. Does your computer have the same network settings as the others where it is working?
Adele

Installing crystal reports 9 for the first time

Hi,
I am trying to install Crystal Reports 9 for the first time. We just received a package with 4 envelopes including Crystal Reports 9 Advanced, Standard, Professional, and Developer. Each envelope also includes Crystal Enterprise Report Appliation Server which I don't think I need (or I'm not sure). I have read a little bit on how I can go online to the SAP Service Marketplace and request license keys. I have not requested a permanent license key yet. I believe that I can install Crystal with a temporary key and then input the permanent key later. What I have done is insert the installation CD for Crystal Reports 9 Developer and then input the product key code found on the back of the Crystal Enterprise Report Application Server CD cover that was packaged with the Crystal Reports 9 Developer CD. However I get a message saying that the product key code is not valid or has expired. There is no product key code on the cover for the Crystal Reports 9 Developer CD but there is one on the Crystal Enterprise Report Application Server CD cover so that is why I input it.
Why is this key code expired? Please note that I am installing on a test PC before I install on the PC of the user who will be using Crystal for work purposes. Therefore I wanted to just install with a temporary key if there is such a thing at this time.
thanks
JW

Hi Josh,
I would like to add few things with above suggestion
For a new key code :
Request key codes for new orders via SAP Marketplace (SMP), will receive a download letter on new purchases providing them with their SMP login credentials. Using these credentials you can login and click in the "Keys & Requests" tab > Request a License key .
If your existing Key code does not work :
You need create a customer message [https://websmp107.sap-ag.de/message] using component XX-SER-LIKEY-BOJ .
Hope this helps,
Regards,
Shweta

Bunch of ERRORS after installing SAP BPC 5.1 for the first time

Hi guys
Our basis guy is installing SAP BPC 5.1 for the first time. After the installation, I can get into SAP BPC - Administration screen but I get a lot of errors when I try to do some changes. Some of them are -
1. Whenever I try getting into the SAP BPC administration I get the following error. But when I click OK it gets me to the administration screen but after that Hell breaks loose
    Error on uncompressing file: Error : ActiveX component can't create object.
2. Create dimensions -
    Split File Error
3. Delete dimensions -
   OLAPConnect Error - The Database with ID = 'ApShell' doesn't exist in the collection
4. BPC for Excel (I am logging in as a system admin)
    The dimension information file cannot be created. There may be a network or security issue.
    Error Message: InitCatalog:Either the user does not have access to the ApShell database, or the database does not exist.
I am sure I will get a lot of errors once I start playing with the configuration.
Please comment.
Thanks,
Ameya Kulkarni

Hi Ameya Kulkarni,
I sorry I wrong type something,
1. Whenever I try getting into the SAP BPC administration I get the following error. But when I click OK it gets me to the administration screen but after that Hell breaks loose
Error on uncompressing file: Error : ActiveX component can't create object.
==>
You should do this step such as:
1. copy file "XceedZip.dll" into the directory SAP BPC
2. register that file into the register window using sintaks: "regsvr32"
3. If the successfully message box appears, You should open the MS.Excel or SAP BPC administration
2. Create dimensions -
Split File Error
==>
You should check the database your application in MS.SQL first please.Perhaps, It's does not open and retrieve data.
3. Delete dimensions -
OLAPConnect Error - The Database with ID = 'ApShell' doesn't exist in the collection
==>
You should check the database your application in MS.SQL first please.Perhaps, It's does not open and retrieve data.
4. BPC for Excel (I am logging in as a system admin)
The dimension information file cannot be created. There may be a network or security issue.
Error Message: InitCatalog:Either the user does not have access to the ApShell database, or the database does not exist.
==>
You must solve the problem no.2&3 because you should add new user through SAP BPC Administration for the application.
I wish My Suggestion can help you.
Regards,
Wandi Sutandi

Getting error while synchronising for the first time to get Device ID

Hi All,
When I am trying to synchronise for the first time to get device ID I am getting following error.
Could any body through some light on this please.
Synchronization started
Connection set up (without proxy) to: http://XYZ:portno/meSync/servlet/meSync?~sysid=MOB&
Connection to server failed.
Synchronisation problems: Transport-layer (http) sync exception raised (root cause: Exception while synchronizing (java.io.IOException: Not in GZIP format))
Regards,
Ameer Baba.

Hi,
please let us know what patch level your middleware is running on.
The mobileengine.config file is placed in the MI client installation directory in subfolder settings. On PC it is in
c:\Program files\Sap Mobile Infrastructure\settings.
From the URL you mentioned above you are using the "old" technology. Please go the service.sap.com/instguides and follow the setup guid for the old technology.
When you enter the URL directly into the browser you should get a LOGON popup. This shows the service is running. I would expect that you do not get this popup due to missing setup.
If you want to use the new sync service in SICF and you have configured this. have a look into the manual. In that case you are missing some settings on the MI client. The problem is, that the old MI client uses old sync service by default.
Regards,
Oliver

4.5 installation for the first time- so frustrating. I NEED HELP!

Similar Messages

Maybe you are looking for