4.5 OS for Verizon 8830 - memory issues

I upgraded my VZ 8830 to 4.5, and it looks great, but I have noticed I am losing memory even if the phone is not "active" (translation: not on a call, not using the browser or apps, etc.). I started out with about 16MB and went to 14MB in about 5 minutes or so. The lowest I got to was 11 MB then I did a battery pull. This a pretty vanilla 8830, using BIS for company email, a couple of mobile links to news agencies, etc. With the old 4.2 OS, I would have to do a battery pull maybe once every 10 days or so.
Any thoughts?

I have the exact same issue now that i upgraded to vzw's MR4 (BB OS 4.5). I was down the the point of constantly having only 1-2 Mb free if I was lucky, so I uninstalled every 3rd party program I had (google maps, voice, gmail, talk) and I can only get back to haveing around 11MB free. THen had the phone sitting on the desk after a fresh reboot and it started at 11Mb and dropped to 9.5 over the course of 45 Minutes. I hadnt even run any applications since the reboot. Have cleared event logs, run memory cleanup, extra languages removed, uninstalled help, no sample videos or music, only default themes and the most free space I can get up to is around 11Mb with almost every application uninstalled, which doesnt seem right to me. I like the features of the new 4.5 OS, however stability is horrible. I end up having to reboot this thing quite a bit just to keep it running, sometimes several times a day.

Similar Messages

Question for those with memory issues on k8n neo plat

I have been having issues with my memory on the k8n neo platinum board since i built the system last month and i just recently discovered a fact I had overlooked.
I Have discovered that if i test the system while it is cool (having sat turned off overnight for example), then memtest will pass the ram just fine and the system will be stable for a short period of time, generally longer if no intensive applications are used, ie. doom3 vs. websurfing).
This system, once it heats up ( seems mostly to be the nvidia 3 nb that needs to be "hot"- that is, a probe placed in contact with the module reaches about 58+ degrees c) then the system becomes unstable and memtest, if used, fails.
Prime95, if used on it when its cool, will usually take about an hour or so to fail, but if its used on the system when its been running a bit ( temps from nb at 58c+ and memory module hot to the touch) then it fails after about 20-30 seconds.
I have placed an active hs on the nb in an attempt to correct this, but temps still remain high with failures occuring.
I have spent the better part of three days testing the sytem this way and the above facts have held true in all these tests.
I have tested at stock ratings ( not using "auto" in bios, but using "approved ratings" of 10 x 200 for fsb and timings of 2-3-3-7 for my ram at 1:1 (which is recommended as well) since i am testing for base stability at this point;Voltages have been left at auto settings, however.
I was wondering if anyone else with memory issues could try this out and post if this seems to be the case for you as well.
Perhaps the memory issues on these boards are directly related to a problem with the nvidia 3 chipset running too hot?
Does anyone have a memory issue with these boards who is using water cooling on the NB ?
Lack of issues from people using 'problem" memory, but having no failures with water cooled nb's would support my assumption.

Yes i did mean chipset.
I am using a stock hs/fan from amd, which seems to run a tad hot but, considering that I wont overclock until I can get board stable, its not an issue. (runs 35-40 idle and up to 72 intensive). I need the warranty more then the extra mhz at present.
I removed the stock heatsink from the nvidia chipset and bought a generic chipset cooler (green, very little in the way of fins and seems to be aluminum) with a small fan.
I used a generic silver paste from Compusa to adhere both the cpu hs and the chipset.
I didnt lap either hs, just installed each as per instructions on artic silvers website (figured it had to go on the same way even generic).
I also bought a kingwin thermal center which i ran probes from to the cpu, case, and nb chipset.
I am not using it to adjust fans so those arent connected - its just a reference temp I can see at a glance, esp considering the funky bios reading this boards been known to give.
I assume from these responces that even a nvidia 3 250 chipset shouldnt get as hot as mine?
I asked about that from the retailer i bought this from but he seemed to think it was "ok" at 50ish celcius, but then again he didnt look too confident when he said it, lol.
Idle right now reads on Corecenter at 28 celcius for cpu and 33 celcius for the chipset, although, I have readings of 37 c and 43 c from the kingwin thermal center, which i believe to be more accurate.
My voltage reads at 11.67 for the 12v line at idle right now.
The psu i got is stick from the xblade case i bought in store. (http://www.xoxide.com/xblade2.html)
I have a dvd burner, cd drive, and two maxtor ide hd's attached to the system;The only card is the agp.
Is there a way to check and see if the cpu ispower starved? software monitor or even an external probe perhaps?
I havent put a probe on it, but the ram came in its own heatspreader, which gets very hot to the touch as well.
What temps should I be looking for on these items?

Need a topic for Verizon Web Site + Issues with Web site (please forward)

Suggestion 1: Add a topic/forum section for Verizon Web site: If I've missed it, please let me know, but I searched the forums and could not find results for "web site," except irrelevant references. Since I could not find one, here is. . .
Suggestion 2: Fix these Web site problems (can someone in Verizon forward these to your Web team? All attempts failed)
On Contact us page, Customer Service link leads to a 404, not found error
Fix faulty 'next page' link in Droid Reviews: When going from page 2 to page 3 of reviews using the 'next' link at the bottom, the reviews change from Droid Reviews to HTC Imagio reviews. Droid still shows at the top, but the content consistently shows that people are reviewing Imagios.
User names like IluvImagio and imagiouser
Features of Imagio are referenced
Bar at top shows 2000+ reviews and image of Droid; info for review section of page shows 300+ reviews
http://www.verizonwireless.com/b2c/productReview?action=showAllReviews&phoneId=5069&item=phoneFirst&...
Suggestion 3: Fix faulty link for forum registration: When trying to register for the forum, I clicked on 'Register.' I got an error that my password and username were incorrect. I thought I'd misclicked, but I could reproduce this.
Cheers.

Hello Artemis51,
My apologies for the late reply on this one. Great feedback! I'll definitely add this to the list of registration issues that we're working on.
Thank you so much for taking the time post these issues in such detail.
Regards,
Kathleen
Verizon Telecom
Online Center of Excellence
Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

Equium L20-197 - memory issue

I have memory issue with L20 computer pc-world and currys are selling the L20 with following spec 256mb main memory and 128mb video memory(not up to 128) when that is not the case first of all the memory is shared and it takes 64mb out of main memory and when you try to up video memory in bios it will not let you up it to 128 unless you install another stick of main memory has anybody else noticed this problem? i know the previous L10 model with the intel video chipset was supposed to allocate video memory dependant on load but there is no mention of this on the ati chipset model. any ideas!!!

This information is for anybody with Memory issues
Concerning a TOSHIBA EQUIUM L20-197 Laptop, purchased from PC World or Groups (PC World/Currys/Dixons)
I purchased this laptop for Christmas for my daughter,
The sales man assured me at the time that he would recommend buying Norton internet security suite, because it was half the price when you buy any PC or Laptop.
What he did not tell me is, when you load the Norton software, the operating system is so slow it is just about unusable!
This problem is down to memory issues, the motherboard should have 256MB, but the operating system only gets 192MB due to the Graphics card steeling 64MB.
The answer to this problem is firstly the Graphics card should be set to 128MB in the Bios setting; this is not possible with the memory only being 256MB on the motherboard.
Secondly, the minimum requirements for Norton internet Security and Windows XP is 256MB not 192MB.
Being an Engineer myself and pointing out this to the Manager at PC World, he allowed me to purchase the memory locally and refunded the difference due to the price.
I purchased 512MB DDR2 533PC-320 for 27.48 the Toshiba now works like a dream.
One last point I do not recommend any body to install Norton Go back on your Laptop that comes with Norton internet Security, when you have Windows XP it just takes up too much space on your hard drive and you have System Restore anyway.

Heap Memory Issue in weblogic 9.2 for a JSF 1.1 web application

Hi,
We are running a JSF application (Myfaces, facelets, tomahawk, richfaces & iBATIS) in weblogic 9.2 server on Solaris 10. This application is deployed in production and works fine under normal circumstances. But when there is a heavy user load we are facing a memory issue. The memory usage is gradually increasing and when it reaches to max, Full GC kicks in again & again which choks up all requests. We don't save anything in session scope. All our backing beans are saved in request scope hence they should be garbage collected after each request done, but this is not happening.
We took the heap dump from production after this issue and analyzed it. After my analysis, I found all objects which are set in request object not being garbage collected and the root referers of all these objects is weblogic.servlet.internal.MuxableSocketHTTP.
I reproduced the similar behaviour in one of our development environment using JMeter. I ran 100 concurrent users in JMeter for almost 1 hour and saw the similar behaviour. Below is the result of all weblogic objects which are still hanging in heap after test was over (I also ran manual Garbage Collector from admin server).
1) weblogic.servlet.internal.MuxableSocketHTTP - 1774 objects - retained heap (1 GB)
2) weblogic.servlet.internal.ServletRequestImpl - 1774 objects - retained heap (1 GB)
My understanding is that every request made to weblogic server goes through the MuxableSocketHTTP object which creates the ServletRequestImpl to serve it. Once the request is served these objects are suppose to be removed. As a result of that whatever is saved in your request will still be hanging.
I am not able to understand why these objects are hanging after request is done. Could anybody answer to my question. I appreciate your help in advance.
The GC setting for weblogic server while startup is:
-XX:MaxTenuringThreshold=15 -XX:+PrintTenuringDistribution -XX:+AggressiveHeap -XX:+PrintGCDetails -XX:+PrintGCTimeStamps -XX:PermSize=128m -XX:MaxPermSize=128m -Xms3g -Xmx3g -XX:NewSize=512m -XX:MaxNewSize=1024m
Thanks MaKK

What happened with this issue? We are seeing something similar on WebLogic 9.2 MP1 in Solaris (Jdk 1.5. patch 10. 32 bit). Out of Memory's with thousands if instances of weblogic.socket.MuxableSocket hanging around.
Our thinking was initally the Java heap, then we thought that maybe the sockets weren't being closed properly, possible in WebLogic or in LiveCycle.
Any info would be greatly appreciated.
Snippet of our stack trace:
<16-Feb-2010 04:30:13 o'clock GMT> <Error> <Kernel> <BEA-000802> <ExecuteRequest failed
java.lang.OutOfMemoryError: Java heap space.
java.lang.OutOfMemoryError: Java heap space
>
javax.ejb.EJBException: EJB encountered System Exception: : java.lang.OutOfMemoryError: Java heap space
     at weblogic.ejb.container.internal.EJBRuntimeUtils.throwEJBException(EJBRuntimeUtils.java:145)
     at weblogic.ejb.container.internal.BaseLocalObject.postInvokeCleanup(BaseLocalObject.java:550)
     at weblogic.ejb.container.internal.BaseLocalObject.postInvokeCleanup(BaseLocalObject.java:496)
     at com.adobe.idp.um.businesslogic.directoryservices.DirectorySynchronizationManagerBean_f5g74_ELOImpl.synchronizeProviders(DirectorySynchronizationManagerBean_f5g74_ELOImpl.java:267)
Joel

Need a Forum For Poor Customer Service Issues, Like Yelp For Verizon.

Has the customer service been getting worse since there has been less competition for Verizon and because they have the backing of Google? Are they getting swollen heads that make it hard to have any sort of common courtesy? I felt like I was dealing with comcast the other day, not Verizon. I have ONLY been with Verizon because of the customer service. If that starts to disappear, at&t might be in my near future. My dad has them and he has no problems with customer service. I've never had problems with verizon ever. Until now. I would love to be able to get the persons name and customer rep number and report on a forum somewhere about my experience. Just to see if it was me or if this person needs to be fired. Does something like that exist? Oh and of course, vice-versa.

Just hop on over to Google and try and find the names of some key players at VZW and search for their contact info. It took me every bit of a minute to google and find the website people. It has the name of some key folks and contact info...send them an email and voice your concerns. Will it help...who knows...but at least you'll feel better knowing you tried... Good luck with whatever issue you're having with VZW...
Executive Biographies - Verizon

Nokia Lumia 822 for Verizon - Application Issues

First – I apologize in advance for the length of this post – I just wanted to provide as much detail as I could to help others that might run into problems like I did.
I just got my Nokia Lumia 822 for Verizon and had some issues that I believe were related to the phone being set up for English United Kingdom instead of English USA.
When the associate was done setting up my phone, I started using it and noticed immediately that the virtual keyboard was set for UK English (it displayed a co.uk button instead of a .com button). I went into Settings > System > Keyboard and Settings > System > language+region and switched from English UK to English USA, and I thought everything would be fine.
Although phone functionality, texting, 4G, WiFi, and voice mail from the Verizon Wireless Phone application all worked, and I was able to download applications from the Windows App Store, I had the following issues:
My Verizon Mobile hangs at “Loading Resources…” screen
Voicemail application – got “SIM Error – Unable to read SIM Data” error message
Settings > System > Nokia account – got “Hardware Problem – Couldn’t Complete Operation” error message
Settings > System > Backup Assistant Plus – would not start and returned directly to Settings > System menu
Settings > System > extras+info – would not start and returned directly to Settings > System menu
I took the phone to my local Verizon Wireless store and they told me that it looked like a hardware problem and that I should return it for an exchange where I purchased the phone. I also called Verizon Tech Support, and the support assistant tried a couple of things before coming to the same conclusion – that the hardware was probably faulty and I should exchange my phone for a new one.
I decided to ensure that my SIM card was seated properly, so I popped off the back cover, removed the battery, then removed my SD Card and SIM Tray, then reinserted everything and put the back cover back on. When the phone booted up, I noticed that the App Store had 6 updates for the apps that I was having trouble with. I went into the App Store and downloaded the updates, and now encountered the following problems:
My Verizon Mobile now launched, but I got an error message that the app could not connect to the network.
Voicemail application – still got “SIM Error”
Settings > System > Nokia account – still got “Hardware Problem”
Settings > System > Backup Assistant Plus – application launched but I got an error message
Settings > System > extras+info – now worked, and displayed version information about my phone and OS version
Finally, I went into Settings > System > about and pressed the reset your phone button. When it booted, I went through the initial setup screens and selected the default language (English USA). I noticed that English UK was right above the default selection, and I believe the associate who did the setup in the store selected this instead of clicking on the default. After selecting that I wanted to restore my data from the cloud, and waiting for about 5 minutes for this to complete, I was glad to see that all of the functionality now worked as expected.
So to make a long story short, before assuming you have a bad piece of hardware, try using Settings > System > about – reset your phone – just in case it was set up incorrectly at the store.

Hi ARowald,
I understand your concerns regarding the SD card issues you have encountered. A review of my resources indicate that this issue has been escalated to our software team and the manufacturer will address these issues in a future software update (No ETA).
AntonioC_VZWSupport
Follow us on Twitter at www.twitter.com/VZWSupport

Why is the iphone 4 for verizon having issues on 3g/wifi

So I love Apple products. I have a Macbook and a Macbook Pro. I just got the Iphone 4 for verizon. The phone part works great as well as all of the apps and ipod. BUT my 3g and wifi dont work well at all. Mind blowingly slow or no connection even tho the wifi is full bars, or on the 3g with full bars and the 3g on. I have no idea what to do. If I knew it was going to be this bad, I would have waited till the Iphone for the 4g Lte came out. any suggestions on what to do?
Id like to also point out they replaced my original phone and I do all of the resets. I literally reset the network settings once a day.

I'm pretty sure that you're just unlucky and happened to stumble across two faulty iPhones. Take it to your closest Apple Store, schedule a Genius Bar visit, and if there is a problem they will replace it as long as its within warranty (one year). If not, the people there will guide you and hopefully fix the problem.

Memory issue with Podcast !!!

Hi,
I have several issues with the Podcast App.
- i cannot sync podcast that i have downloaded on my laptop using itunes to the iphone,
- when i download some podcast directly on the iphone, i cannot play them, i still have to stream them,
- i have uge memory issues and i think that the downloaded version of the podcast might be somewhere on the iphone, but cannot access / delete them (over 16 GO, i have more than 4.5 GO used for 'other', that are not related to anything...)
i have tried to delete / reinstall the app, but this does not change anything...
Any help ?
Rgds

Quote
I have a MSI 975X Platinum rev 2 mb with a e6300 processor overclocked to 2.24ghz.
If your CPU operates @2.24 GHz, it means that you increased FSB frequency to about 348 MHz.
To make sure there is no misunderstanding here, let me point out the following:
Memory frequency is ALWAYS linked to FSB frequency by the FSB/DRAM Ratio you can select in BIOS. If you select 1:1 for example, the BIOS will show that memory frequency is 533 MHz. This value however, only applies to the default FSB clock speed of 266 MHz:
266 MHz x 1 = 266 MHz (or 533 MHz effective DDR2-frequency).
If your system is overclocked, what counts is only FSB/DRAM ratio, not the memory speed displayed in BIOS. That means, if you set FSB/DRAM ration to 1:1 and FSB frequency to 348 MHz, your RAM will operate @:
348 MHz x 1 = 348 MHz (or 696 MHz effective DDR2-frequency).
The main question is:
What are you talking about when you say, you can't make your RAM operate @800 MHz?
The BIOS does not offer a proper divider to get your RAM to 800 MHz @348 FSB clock speed to begin with.
You have the following choices if your overclock your system:
FSB=300 + FSB/DRAM ratio = 1.33
300 MHz x 1.33 ~ 400 MHz (or 800 MHz effective DDR2-frequency)
FSB=320 MHz + FSB/DRAM ratio = 1:1.25
320 MHz x 1.25 = 400 MHz (or 800 MHz effective DDR2-frequency)
FSB=400 MHz + FSB/DRAM ratio = 1:1
400 MHz x 1 = 400 MHz (or 800 MHz effective DDR2-frequency)
Use CPU-Z to monitor the DRAM frequency that is actually set if you are overclocking.

Memory issues

I have a 2008 Macpro...remarkable up-to -date for its age...I plan to use it for some time yet. Lately I have been a having what seems to be a memory issue. There are 12 gig of Ram installed...6x2 gig each in pairs. Sometimes on boot the screen only shows a flashing folder. I shut down and reboot, and it seems fine...but only 8gig of ram shows installed. I opened it up, unseated the boards that hod the ram, and unseated and reset all he ram, and replaced the boards. Great, all he ram shows, 12 gig again. This morning, a few days later, it did it again, showing 8. So, when I run Crucial's memory analyzer, it shows first four slots full, last four empty. A few questions...are the first four slots the top board, the last four the bottom board? This, BTW, is what it was also showing before I reseated the ram. If so, the ram in question s on a separate board. Opinions, is the ram bad, or the board, or neither? Should I reseat again and flush with contact/tuner cleaner/degreaser? Could this hurt? (it is made to clean electronics) the machine does seem ever so slightly unstable. FCP crashed once in a 5 hour edit, which it has done before but rarely. The machine itself did not crash, just the program. Can using the machine like this do more damage, or will it just not boot? I feel it is a seating or connection issue, as I have never seen ram come and go, once it is fried it's fried. The ram is still pretty pricy, but I was going to buy 4 more gigs just to fill it out. Are the two board that hold the ram identical, top and bottom? If so, is a good diagnostic tool to swap them and see what happens? Move all the ram and swap board positions, or do I risk blowing ram ? Remember, the ram did show up when I reseated, so it seems like it is I damaged. My goal would be to see if top ram stops appearing. Does ram need to be filled in order? I know in pairs, but can I just swap the boards and leave the ram, which should look like filling slots 1,2,5,6,7,8...as opposed to 1,2,3,4,5,6. Can the boards be swapped, or are they set somehow to be 1-4 and 5-8, or is that determined automatically by their upper or lower insertion? Any other advice is appreciated. Funds are low, so I need to keep this machine running. Other info, 3.06ghz (2 quad core) Xeon CPUs, 1tb system drive, 4 TB raid5' OSX 10.6.8 dual graphics display with 512MB (can't remember card model right now). Also, can I update graphic card in this machine? I looked at it a few years ago, but the I for I found was confusing and I never got to it. I figure I might be able to get a better card pretty cheap by now. Thanks all.

You have typed a huge list of ideas all as one paragraph with many questions in it without a single bit of white space. My eyes are not good enough to read a question, attempt to answer it, then dig through the sea of letters to find the next question.
Your writing needs white space, which gives it a peculiar overall shape, and allows a reader with poor eyesight to return to a particular spot in the text. So I will attempt to answer some parts of your query, but will be forced to do so from memory of what you wrote.
The Mac Pro uses Error Correcting Code (ECC) RAM. Eight extra bits are stored with each word, and checked when read back. Single-bit errors are detected, and the check bits are used to make a correction on the fly. More complicated errors are detected, and can cause your Mac to halt on a kernel panic to prevent bad data from propagating.
ECC RAM means your Mac can detect bad memory easily at Startup, and can declare pairs of DIMMs "absent" to avoid using them.
Contact corrosion, which was an issue with much older DIMMs, is rarely an issue with these FBDIMMs. Once re-Inserted ONCE, corrosion will not recur for a year or more.
The upper and lower Riser-cards are identical.
The FBDIMMs in these machines are subject to overheating and death. If Mac OS X or any program reports DIMMs as missing, at least one of the DIMMs in that pair has died (but since they are installed in pairs, both are marked absent).

Firefox 3.6.8 and memory issues

After the last update to 3.6.6, I disabled plugin-container per the instructions given on the forum, and my RAM problems went away. However, after the automatic update to 3.6.8, the memory problems came back, with memory usage going up to 92%. I downgraded to 3.6.4, and turned plugin-container off again; while memory usage is currently at 84%, it is not as low as it was before the upgrade to 3.6.8. (79-80%) (There is very little difference in the websites being opened on the various tabs.)
== This happened ==
Every time Firefox opened
== I upgraded to 3.6.8

ffs guys. It's a free browser. It's cool. We love it. But can we do something about memory issues? Almost every release has huge memory leaks.
How about halving the release points and focus on memory issues for the other half of the time. I am a long time user since way back in the day and it seems to me that instead of trying to release so many versions, we should be focused more fixing the current release.
I say put a moratorium on new features until bloat can be fixed. These experiences are starting to give me a hardon for IE again.
Screw new features. I can deal with plain old tabs like they are. I don't need more bells and whistles. This browser has been kicking ass and taking names for a loonnnggggg time. We don't need more bloat. Keep the security fixes coming but everything else can wait. Take a breath. Stop and smell the roses for a few weeks.

Regarding Memory issues((error) while scheduling the job

Hi Friends
I am facing memory issue while rerunning BODS jobs in production.As we have rapid mart when jobs got failed i rerun the
job suddenly job got failed and in logs i found Memory issue
please help me what i have to do in steps
Thanks

I think there is no one solution to buffer pool issue. Buffer pool issue happens due to many reasons like how you design the data flow, requirement of push down or even insufficient memory in the running environment.
You can check by checking 'collect statistics for optimization' during running the job. Also in the data flow, try changing from pageable cache to memory cache by right clicking and selecting properties. The below link give some details on caching, might be helpful.
https://wiki.sdn.sap.com/wiki/display/BOBJ/CachinginDI
Arun

Memory issues while fetching content

HI all,
I am using SAP KM Apis. however i am facing some memory issues while using them.
I am using getContent() api on a resource. and then getInputStream on the Icontent object. I am using a ByteArrayOutputStream for writing the data. here is the code snippet:
byte[] buf= new byte[4096];
InputStream inputStream = content.getInputStream();
ByteArrayOutputStream os = new ByteArrayOutputStream(1024)
while ((count = inputStream.read(buf)) != -1)
    os.write(buf, 0, count);
byte[] arr=os.toByteArray();
THis code consuimes a lot of memory . we need to optimize this. we also tried removing BYteArrayOutputSteam and directly read the bytes in chunk :
int n;
do
     n = inputStream.read(buf, 0,(int)content.getContentLength());
while (n != -1);
however this approach has not helped us.
please suggest an approach where memory consumption is less and the entire content is fed.
thanks

Hi
This code worked for me for reading from a KM res...
BufferedReader reader = new BufferedReader(new InputStreamReader(is));
StringBuilder sb = new StringBuilder();
String line = null;
        try {
            while ((line = reader.readLine()) != null) {
                sb.append(line + "\n");
        } catch (IOException e) {
            e.printStackTrace();
        } finally {
            try {
                is.close();
            } catch (IOException e) {
                e.printStackTrace();
return sb.toString();
Regards
BP

IPod Nano 5th Gen memory issues?

Hello. My iPod Nano 5th gen is great, and I've been able to use it for 2 years now, and it serves me well. Perfect condition since the day I got it. However, there are some memory issues...
First off, I have only two recorded videos totaling 1 minute and 29 seconds, so it shouldn't take up much memory at all. And I don't have any other videos on my iPod either.
Well, when I go to "About" under "Settings", then it always says that there are only 902 MB left, and it's an 8 GB. What's weirder is that it says that 6.1 GB are being used my audio, and I only have 712 songs. When I select all of the songs that are on my iPod on my PC, then it tells me that it totals to only 3.53 GB. Kinda weird, and I really need this extra space now.
Secondly, I should tell you that I don't use iTunes to syncronize my iPod. I use a third-party program called CopyTrans Manager because it's simpler, easier to navigate, and faster in my opinion. Idk what it is, but it's bothering me. Hopefully some of you can tell me where I can go to eliminate these issues and finally get my iPod back to better use and full memory.
Help me please. I don't know where to go next...
Thankee.

I don't use iTunes to syncronize my iPod. I use a third-party program called CopyTrans Manager
Contact the manufacturer. Check with them to determine if the issue is with them.

IDCS4 V6.0 memory issue with preflight

When I create a custom profile for preflight and run it i encounter memory issue. Hard disk starts running indefinitely and after a while InDesign crashes. I have try, by steps, to make the profile less demanding (I should try the reverse way) but instead of crashing, indesign finally sends memory error message and can crash later. Apple Activity monitor shows that sometimes indesign requires all the memory available (1,5Go)
Any of you have ever try to set a custom preflight profile ? The basic one is really too tolerant.
Thank you.
I'am on Imac 3,06 2 Go

I've spent quite a bit of time working with custom preflight profiles on my MacBook Pro, 2 Gb memory, Mac OS X 10.5.5. I have never run into a memory error. In fact, I've never ever run into a memory error in InDesign. Memory errors can occur because of defective fonts. Have you tried with different fonts? Have you tried on a different computer?
Yes, the [Basic] preflight checks only for missing fonts, missing or modified graphics, and overset text. You need to work with custom preflight profiles depending on your particular workflow.

4.5 OS for Verizon 8830 - memory issues

Similar Messages

Maybe you are looking for