4.6C to ERP6.0 Upgrade - what are the recommendations for Unicode and Java

Hi All,
Forgive such a basic question.
We are just beginning to look at our ERP6.0 upgrade and am unclear whether we should convert to unicode at the same time, and also what are the uses for the Java stack.
Unicode?
We are a single language Latin-1 site so don't need Unicode. However will it become mandatory eventually? Are we better, if we have the opportunity now, just to convert. Also I believe the Java stack is only Unicode. Does ASCII ABAP and Java Unicode complicate things?
Java?
Will we need it? We are proposing a technical upgrade from our 4.6c Javaless environment. Where does Java come in to play in ERP6.0? Doesn't it increase greatly the iSeries HW requirements? (I'm looking at a 2 way 550 at the moment)
Look forward to hearing your views.
Regards
Steve

Hi Stephen,
at the moment, in a latin-1 environment Unicode is for old customers not a requrirement. This might change in 5-10 years ...
Java: No problem at all with ASCII (in latin-1 environments)
=> there is no need for you, but you could go for it. We did several Unicode conversions already and these Latin-1 conversions are pretty easy and simple especially on iSeries, because of the special InPlace Unicode Conversion.
... but this can be done at any time ...
Regards
Volker Gueldenpfennig, consolut.gmbh
http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de

Similar Messages

What are the settings for datasource and infopackage for flat file loading

hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumar

Loading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.

What are the prerequsite for installing and Configure Knowledge management

Hi All,
what are the prerequsite for installing and Configure Knowledge management in CE 7.1 eph1.
Thanks
AB

Hi Michael,
Thanks for yor quick response.......Can you please tell me whats the alternative for KMC in CE 7.1 in portal
thanks
AB

What are the URLs for webmail and the wiki?

I see that Lion Server supports webmail and a built-in wiki server, both available through a web browser.
What are the URLs for these; how do I get to them? I can't find that important detail anywhere in the documentation.

From /etc/httpd.conf
Alias -->name --> location
Alias /webmail /usr/share/web/webmail.html
Alias /changepassword /usr/share/web/changepassword.html
Alias /profilemanager /usr/share/web/profilemanager.html
Alias /webcal /usr/share/web/webcal.html

What are the prerequisites for GATP and how to check SO in APO

Hi
I've created a Sales order in R/3. for this the availability check is being done in APO(SCM). when I press enter it is going to APO(SCM).
now i want to see this Sales order in APO(SCM), what is transaction for this? and do i need to maintain any CIF model to see the Sales order in APO.
pls give me some note on this.
thanx in advance
Satya
Edited by: Wilian Segatto on Jan 25, 2010 4:40 PM

Hello,
Please refer Building block of GATP, you will able to get systimatic way how to use GATP functionality in R/3 and APO as well as what are the settings require for it.
http://help.sap.com/bp_scmv150/BBLibrary/documentation/ATP_BB_ConfigGuide_EN_DE.doc

What are the units for stime and sdate in the stderr file

I am trying to use those entries to determine what time the slowest ervice time occurred. The time looks like milliseconds, but the date is puzzling.
--Tom

Hi Tom,
When I analyze stderr files, I consider the following things (I don't know if there is docs on the subject, but I have experimented it) :
1- SDATE and EDATE (start and end date) are elasped times in seconds after jan 1st 1970 (Epoch). Sample of C code :
long edate;
// here sscanf EDATE in &edate from stderr file
// Transform "long" to "struct tm"
struct tm *tmtime = localtime( &edate );
// display
printf ( "EDATE=%s", asctime (tmtime) );2 - STIME and ETIME are elasped times in system defined CLOCKS_PER_SEC scale after booting server machine. The delta between this 2 values gives you the service elapsed time in ticks.
unsigned long stime, etime;
double delta;
// here sscanf STIME and ETIME in &stime and &etime from a stderr file line
// compute the delta in milliseconds
delta = ( etime - stime ) * 1000 / CLOCKS_PER_SEC ;
// display
printf( "%12.f", delta );When using STIME and ETIME, do not analyze a stderr file from a machine whith another CLOCKS_PER_SEC value.
Maybe somebody from the Tuxedo team will confirm you my date and time interpretation !!
Regards

WHAT ARE THE SYNTAXES FOR CALLTRANSACTION AND SESSION METHODS

hi
experts
can u help me plzzzzzzzzzzzzzzzzzzzzzz
for this

Check oout this sample program ...
REPORT ztest_report
NO STANDARD PAGE HEADING
                        LINE-SIZE 255
                        MESSAGE-ID ZRASH.
*                 Internal Table Declarations                          *
*--Internal Table for Data Uploading.
DATA : BEGIN OF IT_FFCUST OCCURS 0,
         KUNNR(10),
         BUKRS(4),
         KTOKD(4),
         ANRED(15),
         NAME1(35),
         SORTL(10),
         STRAS(35),
         ORT01(35),
         PSTLZ(10),
         LAND1(3),
         SPRAS(2),
         AKONT(10),
       END OF IT_FFCUST.
*--Internal Table to Store Error Records.
DATA : BEGIN OF IT_ERRCUST OCCURS 0,
         KUNNR(10),
         EMSG(255),
       END OF IT_ERRCUST.
*--Internal Table to Store Successful Records.
DATA : BEGIN OF IT_SUCCUST OCCURS 0,
         KUNNR(10),
         SMSG(255),
       END OF IT_SUCCUST.
*--Internal Table for Storing the BDC data.
DATA : IT_CUSTBDC LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
*--Internal Table for storing the messages.
DATA : IT_CUSTMSG LIKE BDCMSGCOLL OCCURS 0 WITH HEADER LINE.
DATA : V_FLAG1(1) VALUE ' ',
"Flag used for opening session.
       V_TLINES LIKE SY-TABIX,
       "For storing total records processed.
       V_ELINES LIKE SY-TABIX,
       "For storing the no of error records.
       V_SLINES LIKE SY-TABIX.
       "For storing the no of success records.
*          Selection screen                                            *
SELECTION-SCREEN BEGIN OF BLOCK B1.
PARAMETERS : V_FNAME LIKE RLGRAP-FILENAME,
             V_SESNAM LIKE RLGRAP-FILENAME.
SELECTION-SCREEN END OF BLOCK B1.
*          Start-of-selection                                          *
START-OF-SELECTION.
*-- Form to upload flatfile data into the internal table.
PERFORM FORM_UPLOADFF.
*        TOP-OF-PAGE                                                   *
TOP-OF-PAGE.
WRITE:/ 'Details of the error and success records for the transaction'
ULINE.
SKIP.
*          End of Selection                                            *
END-OF-SELECTION.
*-- Form to Generate a BDC from the Uploaded Internal table
PERFORM FORM_BDCGENERATE.
*--To write the totals and the session name.
PERFORM FORM_WRITEOP.
*&      Form form_uploadff
*     Form to upload flatfile data into the internal table.
FORM FORM_UPLOADFF .
*--Variable to change the type of the parameter file name.
DATA : LV_FILE TYPE STRING.
LV_FILE = V_FNAME.
*--Function to upload the flat file to the internal table.
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      FILENAME                      = LV_FILE
*     FILETYPE                      = 'ASC'
      HAS_FIELD_SEPARATOR           = 'X'
*     HEADER_LENGTH                 = 0
*     READ_BY_LINE                  = 'X'
*     DAT_MODE                      = ' '
*   IMPORTING
*     FILELENGTH                    =
*     HEADER                        =
    TABLES
      DATA_TAB                      = IT_FFCUST
    EXCEPTIONS
      FILE_OPEN_ERROR               = 1
      FILE_READ_ERROR               = 2
      NO_BATCH                      = 3
      GUI_REFUSE_FILETRANSFER       = 4
      INVALID_TYPE                  = 5
      NO_AUTHORITY                  = 6
      UNKNOWN_ERROR                 = 7
      BAD_DATA_FORMAT               = 8
      HEADER_NOT_ALLOWED            = 9
      SEPARATOR_NOT_ALLOWED         = 10
      HEADER_TOO_LONG               = 11
      UNKNOWN_DP_ERROR              = 12
      ACCESS_DENIED                 = 13
      DP_OUT_OF_MEMORY              = 14
      DISK_FULL                     = 15
      DP_TIMEOUT                    = 16
      OTHERS                        = 17
IF SY-SUBRC = 0.
*--Deleting the headings from the internal table.
    DELETE IT_FFCUST INDEX 1.
*--Getting the total number of records uploaded.
    DESCRIBE TABLE IT_FFCUST LINES V_TLINES.
ENDIF.
ENDFORM.                    " form_uploadff
*&      Form Form_bdcgenerate
*     Form to Generate a BDC from the Uploaded Internal table
FORM FORM_BDCGENERATE .
*--Generating the BDC table for the fields of the internal table.
LOOP AT IT_FFCUST.
    PERFORM POPULATEBDC USING :
                                'X' 'SAPMF02D' '0105',
                                ' ' 'BDC_OKCODE' '/00' ,
                                ' ' 'RF02D-KUNNR' IT_FFCUST-KUNNR,
                                ' ' 'RF02D-BUKRS' IT_FFCUST-BUKRS,
                                ' ' 'RF02D-KTOKD' IT_FFCUST-KTOKD,
                                'X' 'SAPMF02D' '0110' ,
                                ' ' 'BDC_OKCODE' '/00',
                                ' ' 'KNA1-ANRED' IT_FFCUST-ANRED,
                                ' ' 'KNA1-NAME1' IT_FFCUST-NAME1,
                                ' ' 'KNA1-SORTL' IT_FFCUST-SORTL,
                                ' ' 'KNA1-STRAS' IT_FFCUST-STRAS,
                                ' ' 'KNA1-ORT01' IT_FFCUST-ORT01,
                                ' ' 'KNA1-PSTLZ' IT_FFCUST-PSTLZ,
                                ' ' 'KNA1-LAND1' IT_FFCUST-LAND1,
                                ' ' 'KNA1-SPRAS' IT_FFCUST-SPRAS,
                                'X' 'SAPMFO2D' '0120',
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0125',
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0130',
                                ' ' 'BDC_OKCODE' '=ENTR',
                                'X' 'SAPMF02D' '0340',
                                ' ' 'BDC_OKCODE' '=ENTR',
                                'X' 'SAPMF02D' '0360',
                                ' ' 'BDC_OKCODE' '=ENTR',
                                'X' 'SAPMF02D' '0210',
                                ' ' 'KNB1-AKONT' IT_FFCUST-AKONT,
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0215',
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0220',
                                ' ' 'BDC_OKCODE' '/00',
                                'X' 'SAPMF02D' '0230',
                                ' ' 'BDC_OKCODE' '=UPDA'.
*--Calling the transaction 'fd01'.
    CALL TRANSACTION 'FD01' USING IT_CUSTBDC MODE 'N' UPDATE 'S'
    MESSAGES INTO IT_CUSTMSG.
    IF SY-SUBRC <> 0.
*--Populating the error records internal table.
      IT_ERRCUST-KUNNR = IT_FFCUST-KUNNR.
      APPEND IT_ERRCUST.
      CLEAR IT_ERRCUST.
*--Opening a session if there is an error record.
      IF V_FLAG1 = ' '.
        PERFORM FORM_OPENSESSION.
        V_FLAG1 = 'X'.
      ENDIF.
*--Inserting the error records into already open session.
      IF V_FLAG1 = 'X'.
        PERFORM FORM_INSERT.
      ENDIF.
*--Populating the Success records internal table.
    ELSE.
      IT_SUCCUST-KUNNR = IT_FFCUST-KUNNR.
      APPEND IT_SUCCUST.
      CLEAR IT_SUCCUST.
    ENDIF.
*--Displaying the messages.
    IF NOT IT_CUSTMSG[] IS INITIAL.
      PERFORM FORM_FORMATMSG.
    ENDIF.
*--Clearing the message and bdc tables.
    CLEAR : IT_CUSTBDC[],IT_CUSTMSG[].
ENDLOOP.
*--Getting the total no of error records.
DESCRIBE TABLE IT_ERRCUST LINES V_ELINES.
*--Getting the total no of successful records.
DESCRIBE TABLE IT_SUCCUST LINES V_SLINES.
*--Closing the session only if it is open.
IF V_FLAG1 = 'X'.
    PERFORM FORM_CLOSESESS.
ENDIF.
ENDFORM.                    " Form_bdcgenerate
*&      Form populatebdc
*       FOrm to Populate the BDC table.
FORM POPULATEBDC USING    VALUE(P_0178)
                           VALUE(P_0179)
                           VALUE(P_0180).
IF P_0178 = 'X'.
    IT_CUSTBDC-PROGRAM = P_0179.
    IT_CUSTBDC-DYNPRO = P_0180.
    IT_CUSTBDC-DYNBEGIN = 'X'.
ELSE.
    IT_CUSTBDC-FNAM = P_0179.
    IT_CUSTBDC-FVAL = P_0180.
ENDIF.
APPEND IT_CUSTBDC.
CLEAR IT_CUSTBDC.
ENDFORM.                    " populatebdc
*&      Form FORM_OPENSESSION
*       Form to Open a session.
FORM FORM_OPENSESSION .
*--Variable to convert the given session name into reqd type.
DATA : LV_SESNAM(12).
LV_SESNAM = V_SESNAM.
*--Opening a session.
CALL FUNCTION 'BDC_OPEN_GROUP'
   EXPORTING
     CLIENT                    = SY-MANDT
     GROUP                     = LV_SESNAM
     HOLDDATE                  = '20040805'
     KEEP                      = 'X'
     USER                      = SY-UNAME
     PROG                      = SY-CPROG
* IMPORTING
*    QID                       =
   EXCEPTIONS
     CLIENT_INVALID            = 1
     DESTINATION_INVALID       = 2
     GROUP_INVALID             = 3
     GROUP_IS_LOCKED           = 4
     HOLDDATE_INVALID          = 5
     INTERNAL_ERROR            = 6
     QUEUE_ERROR               = 7
     RUNNING                   = 8
     SYSTEM_LOCK_ERROR         = 9
     USER_INVALID              = 10
     OTHERS                    = 11
IF SY-SUBRC <> 0.
    WRITE :/ 'Session not open'.
ENDIF.
ENDFORM.                    " FORM_OPENSESSION
*&      Form FORM_INSERT
*       fORM TO INSERT ERROR RECOED INTO A SESSION.
FORM FORM_INSERT .
*--Inserting the record into session.
CALL FUNCTION 'BDC_INSERT'
    EXPORTING
      TCODE                  = 'FD01'
*     POST_LOCAL             = NOVBLOCAL
*     PRINTING               = NOPRINT
*     SIMUBATCH              = ' '
*     CTUPARAMS              = ' '
    TABLES
      DYNPROTAB              = IT_CUSTBDC
    EXCEPTIONS
      INTERNAL_ERROR         = 1
      NOT_OPEN               = 2
      QUEUE_ERROR            = 3
      TCODE_INVALID          = 4
      PRINTING_INVALID       = 5
      POSTING_INVALID        = 6
      OTHERS                 = 7
IF SY-SUBRC <> 0.
    WRITE :/ 'Unable to insert the record'.
ENDIF.
ENDFORM.                    " FORM_INSERT
*&      Form FORM_CLOSESESS
*       Form to Close the Open Session.
FORM FORM_CLOSESESS .
CALL FUNCTION 'BDC_CLOSE_GROUP'
    EXCEPTIONS
      NOT_OPEN    = 1
      QUEUE_ERROR = 2
      OTHERS      = 3.
IF SY-SUBRC <> 0.
ENDIF.
ENDFORM.                    " FORM_CLOSESESS
*&      Form FORM_FORMATMSG
*       Form to format messages.
FORM FORM_FORMATMSG .
*--Var to store the formatted msg.
DATA : LV_MSG(255).
CALL FUNCTION 'FORMAT_MESSAGE'
    EXPORTING
      ID        = SY-MSGID
      LANG      = SY-LANGU
      NO        = SY-MSGNO
      V1        = SY-MSGV1
      V2        = SY-MSGV2
      V3        = SY-MSGV3
      V4        = SY-MSGV4
    IMPORTING
      MSG       = LV_MSG
    EXCEPTIONS
      NOT_FOUND = 1
      OTHERS    = 2.
IF SY-SUBRC = 0.
    WRITE :/ LV_MSG.
ENDIF.
ULINE.
ENDFORM.                    " FORM_FORMATMSG
*&      Form form_writeop
*       To write the totals and the session name.
FORM FORM_WRITEOP .
WRITE :/ 'Total Records Uploaded :',V_TLINES,
           / 'No of Error Records :',V_ELINES,
           / 'No of Success Records :',V_SLINES,
           / 'Name of the Session :',V_SESNAM.
ULINE.
ENDFORM.                    " form_writeop

What are the recommended specs for Spiceworks Network Monitor

What are the recommended disk size and memory for Network Monitor?
This topic first appeared in the Spiceworks Community

Thanks for the response Ralph but I am looking for a more personal experience someone may have managing 200+ Macs via the OS X server and what their specs are.

HT2305 I want to upgrade IMovie, IPhoto, Garageband and ITunes. My MacBookAir is one year old. But what are the prices for updates?

My MacBookAir is one year. I want to upgrade IMovie, IPhoto, Garageband and ITues, But What are the prices for these upgrades. How do I get around?

Actually, if you are updating the free iLife apps (iPhoto, iMovie & GarageBand) that came with your new Mac, the updates are free. Only if you are upgrading to newer major paid versions would you be charged.
iTunes is always free, but is located in Apple Downloads, not the Mac App Store;
http://support.apple.com/downloads/

Can I migrate from WCS 7.0 to PI 1.2. If so, what are the guidelines for migration?

Can I migrate from WCS 7.0 to PI 1.2. If so, what are the guidelines for migration? Do we have any Instructions/steps?

Migration from WCS 7.0 to PI 1.2 can be performed. If the customer wants to migrate data you need to first upgrade to NCS 1.1.1 You can download NCS 1.1.1 from Cisco.com if you have a valid service contract.
For the migration step involving NCS an evaluation license is sufficient. You can obtain an NCS evaluation license from http://www.cisco.com/go/license > Get Demo > Network Mgmt Products > Cisco Prime NCS Evaluation License.
Instructions for migrating data from WCS 7.0 to NCS 1.1.1 are available in NCS 1.1.1 Release Notes. Do not upgrade to NCS 1.1.2 as this release is not upgradeable to Prime Infrastructure 1.2. If you are ordering a Cisco Prime physical appliance (PRIME-NCS-APL-K9) be sure to select the NCS 1.1 image which you can later upgrade to Prime Infrastructure 1.2 after you have migrated your WCS data.
There is a post in the support forum which can be refered.
https://supportforums.cisco.com/docs/DOC-26972

Looking for new laptop what are the differences between pro and air? Besides size. Does the air preform like the pro?

Looking for new laptop what are the differences between pro and air? Besides size. Does the air preform like the pro?

The NEW macbook Pro and Air are EXTREMELY close in form factor
The newest macbook Pro is essentially a larger macbook Air with Retina display and options for speed in increasing prices up to an independent graphics and quad core processor.
both Air and new Pro now have PCIe SSD and permanent RAM.
The Air is the lightweight portable form factor, fast to boot and shut down, but with longer battery life than any of the macbook pro in 13"
Now the new macbook Pro and macbook Air are extremely close in form factor and nature.
both have 802ac wifi
both have permanent RAM, no superdrive
both are slim profiles and SSD
The only real differences now are (in the most expensive Pros) faster processors and quadcore processors and top end model autonomous graphics.
....and of course the retina display
both are now "very good for travel"
Other than features the form factor of the Air and Pro are VERY close now,....so now its merely a matter of features and price more than anything.
You need an external HD regardless of what you get for backups etc. Drop into an Apple store and handle both and make your choice based on features, such as Retina or non-retina, .... both at a distance now look like the same computer.
The Pro weighs more, ....but nowhere near what it used to just a month ago on the older macbook Pros
The NEW macbook Pro is a different creature entirely than the older macbook Pro, .....the new Pro is thicker than the Air, but id frankly call the NEWEST Pro a "macbook Air with Retina display" , or
Maybe a “macbook Air PRO with Retina display”
Instead of Air VS Pro now,.....its really a smooth transition from Air to pro without comparing say, 2 different creatures, now its like contrasting a horse from a race horse.
Either one in 8gig of RAM (preferably)... the 4gig upgrade costs very little, the I7 you will notice only 15% faster on heavy applications over the I5, and NOTHING on most APPS.....I5 has longer battery life.
As you see below, the non-Retina 13" AIR is 82% of the Macbook with Retina display in resolution
there is no magical number of pixels per inch that automatically equates to Retina quality.
http://www.cultofmac.com/168509/why-you-might-be-disappointed-by-the-resolution- of-those-new-retina-display-macs-feature/
A huge internal SSD isnt a game changer for anything, you need an external HD anyway
what you WONT READ on Apple.com etc. is that the larger SSD are MUCH FASTER due to SSD density
"The 512GB Samsung SSD found in our 13-inch model offers roughly a 400MB/s increase in write speeds over the 128GB SanDisk/Marvell SSD"
http://blog.macsales.com/19008-performance-testing-not-all-2013-macbook-air-ssds -are-the-same
Here is an excellent video comparison between the 11” I5 vs. I7 2013 Macbook Air.
http://www.youtube.com/watch?v=oDqJ-on03z4
http://www.anandtech.com/show/7113/2013-macbook-air-core-i5-4250u-vs-core-i7-465 0u/2
I5 vs. I7 performance 13” Macbook Air 2013
Boot performance
11.7 I5 ……11.4 I7
Cinebench
1.1 I5….1.41 I7
IMovie Import and Opt.
6.69 I5….5.35 I7
IMovie Export
10.33 I5…8.20 I7
Final Cut Pro X
21.47 I5…17.71 I7
Adobe Lightroom 3 Export
25.8 I5….31.8 I7
Adobe Photoshop CS5 Performance
27.3 I5…22.6 I7
Reviews of the newest Retina 2013 Macbook Pro
13”
Digital Trends (13") - http://www.digitaltrends.com/laptop-...h-2013-review/
LaptopMag (13") - http://www.laptopmag.com/reviews/lap...play-2013.aspx
Engadget (13") - http://www.engadget.com/2013/10/29/m...-13-inch-2013/
The Verge (13") - http://www.theverge.com/2013/10/30/5...ay-review-2013
CNet (13") - http://www.cnet.com/laptops/apple-ma...-35831098.html
15”
The Verge (15") - http://www.theverge.com/2013/10/24/5...w-15-inch-2013
LaptopMag (15") - http://www.laptopmag.com/reviews/lap...inch-2013.aspx
TechCrunch (15") - http://techcrunch.com/2013/10/25/lat...ok-pro-review/
CNet (15") - http://www.cnet.com/apple-macbook-pro-with-retina-2013/
PC Mag (15") - http://www.pcmag.com/article2/0,2817,2426359,00.asp
Arstechnica (15") - http://arstechnica.com/apple/2013/10...-pro-reviewed/
Slashgear (15") - http://www.slashgear.com/macbook-pro...2013-26303163/

My ipod nano 6th gen fell out of my pockey and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed

My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.

Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius

In Address Book, Lion, what are the checkmarks for when you Edit a Contact?

In Address Book for Lion, when you are in the Add/Edit a Contact window, what are the checkboxes for?

I am not seeing any checkboxes when I edit in Address Book in Lion, can you take a screen shot (Shift Command 4) of what you're seeing and post it?
BTW please fill out your profile (under Your Stuff above) so we know what machine and version of Lion you're using.

What are the steps for loading master data

Hello
what are the steps for loading master data? i want to learn about loading all master data and the steps to choose the best way to load the data.
if anyone has documents please send me the documents i will be really greatful
[email protected] thanks everyone
Evion

Hi Heng,
Download the data into a CSV file.
Write a program using GUI_UPLOAD to upload the CSV file and insert records.Chk the below link for example
http://www.sap-img.com/abap/vendor-master-upload-program.htm
Reward Points for the useful solutions.
Regards,
Harini.S

What are the advantages of compressor and it it even necessary

what are the advantages of compressor and it it even necessary?

Necessary for some and not for others – probably a large majority – who can by with the presets avalaible in FCX.
The users who need Compressor are those who want to control the parameters of the encodes to get the best possible trade-off between file size and quality. Or those who want to do things like standards conversions, complex frame speed changes, better re-scaling capabilities, de-interlacing, re-interlacing, output formats beyond which are available in FCX, chapter markers for DVD and Blu-Ray authoring, batch conversions for multiple purposes through droplets, access to clusters for faster rendering.
Russ

4.6C to ERP6.0 Upgrade - what are the recommendations for Unicode and Java

Similar Messages

Maybe you are looking for