4 audio channels in Premiere Pro CS5.5

I have recorded with PMW320, which writes to 4 audio channels separate. When I put the timeline of Premiere Pro CS4, the channels come apart. In Premiere CS5.5 does not happen, being allocated only one channel. How to change that?

Jim thanks for listening. The same file card XCAM removed, placed in timeline premiere CS4, appears the 4 separate mono audio channels, quabdo put in timeline premiere CS5.5, it arquivoMP4, so put a audio channel.
primeiro Premire CS5.5 segunda foto Premiere CS4

Similar Messages

While importing clip getting error "The file contains too many audio channels" in premiere pro cs5

Hey,
I am using video clips from sony digital hi8 camera and trying to import video clips (.mov) 720*480 fps 29.97 .But unable to get into premiere pro cs5.System configuration:
MAC 10.6.4
2.66ghz intel core i7
4gb ram
nvidia geforce gt 330 mn.
Error :
Actually ,i have checked the inspector panel and i found same infomation in
in this panel for both clips .please check these clips screen shoots seprately .
Actually i have a long video clip and i have scatterred this clip into 6 diffrent portions
where i am not able to import the last video clip.It is giving me same error "file contain too many audio channels"".
Regards
Manoj

I too am getting this error in Premiere CS5. I was digitizing a Broadcast VHS and since I did not have a breakout box, I hooked it up to a Sony DV deck so I could connect via firewire and capture inside Premiere. I was able to capture and import 1 of the 3 clips and it did have 4 audio channels attached to it. However, upon closer inspection only 2 channels had a waveform. I captured the other 2 clips the same way, but this time, Premiere give the error "The file contains too many audio channels."
Any ideas?

How can I import MP3 audio files into premiere pro cs5?

Can any one help?
How can I import MP3 audio files into premiere pro cs5?

It is really difficulty for me.If you still haven't found a satisfactory answer,please search it on google.Hope you can get your answer as soon as quickly!
fifa 14 coins
cheap fifa coins

How do I join multiple (short) audio clips into one single long audio clip in Premiere Pro CS5?

Hello,
The question is in the title but I'm wondering how I can join multiple (short) audio clips into one single long audio clip in PP CS5.5. I put all my short clips right next to each other and selected all of them to see what options are available by right clicking and using the toolbar options at the top. The closest that I got was to nest the sequence, but that's not what I really want.
I'd like to merge all the short clips into one single (long) audio file to use under the video.
Thoughts are welcome and greatly appreciated.
Thanks,
-Melvin

O.K. This is kind of fundamental and you will need to learn up on this fully ...but for now...
Make sure you have the WAB ( work area bar )covering the length of the audio clips. ( You do not need to select them)
Go to the File Menu> Export Media
You will be given all the Export Options. Choose Wave File
Select option for Export Work Area.
Choose where to export the file to ( HD location)
follow your nose from there....
http://tv.adobe.com/watch/learn-premiere-pro-cs5/exporting-with-adobe-media-encoder/
BTW - Why are you taking the audio to Audition anyway? What are you going to do to it.

5.1 audio in Adobe Premiere Pro CS5

I've got a Sequence (5.1 audio). I checked "Match Sequence Settings" in the "Export Settings" window when I was about to output the final video. The problem now is that in the "Export Settings" it says:
1920x1080......etc......
48000 Hz, Stereo
STEREO? That means I CANNOT OUTPUT A VIDEO WITH 5.1 AUDIO?
If I really cannot output it, then what preset should I choose? Or should I change a software? What about all the movies edited by Premiere Pro?
If I can, then why it says "Stereo"?
Do I need some extentions?
BTW, 5.1 audio in After Effects and Soundbooth?

Harm has given you the reason for the Stereo in the output.
Now, I do not use Soundbooth, but one can easily edit 6-channel (most often seen as 5.1) Audio in Audition, BUT then to output to something that will contain all of those channels, one must choose such an output, say WMA. However, that will limit the uses, i.e. no DVD/BD directly. One MUST use an Encoder, such as the SurCode, to produce a DD 5.1 SS AC3 for the primary Audio stream in DVD/BD (or as a supplemental Audio stream, if one has done a 2-channel primary), or they can do something like DTS, but that can ONLY be a supplemental Audio stream in DVD/BD.
For Encoders, one can easily use the Minnetonka Audio SurCode plug-in for PrPro, a SurCode, or similar, stand-alone Encoder, or stand-alone DTS (fill in any other DVD/BD compliant supplemental Aduio stream here) Encoder.
Good luck,
Hunt
PS - for DVD/BD, there are only two types of Audio steam allowed for the primary stream - PCM/WAV, or DD 5.1 SS AC3. Supplemental Audio streams are a bit more open, though most will be player dependent. If you do DTS, for instance, your client might, or might not, be able to fully appreciate that.

Exporting multiple audio channels from Premiere Pro CS6 in MXF OP1a

I have a Premiere Pro project with multiple audio channels and I want to export them as individual channels in a MXF-file.
Method:
When I created a new sequence I choose "Multichannel" from the "Tracks" page. When I export the MXF OP1a, I choose 8 channels from the "Audio" page. I make sure that none of the channels are muted.
Result:
The rendered file contains 8 channels as I want it to, but only the first two channels contains audio (main left + right), the rest of the channels are empty. Channel 1 and 2 contains the audio from all channels, but I want the channels to be seperated in the same way as they are layered in Premiere.
Any ideas what I can do?
Thank you for your help!

Hey Guys,
I'm having problems exporting an 8 channel audio mxf for a broadcast client. The mix they want is as follows:
Track 01: Full Programme Mix L
Track 02: Full Programme Mix R
Track 03: International Sound L
Track 04: International Sound R
Track 05: Music and Effects L
Track 06: Music and Effects R
Track 07: VO Mono
Track 08: Interview Mono
I have setup the sequence following this video on vimeo and am fairly confident I have the sequence settings correct. https://vimeo.com/38501157
I also can export a multichannel mxf. But all my tracks are exported as mono and I am therefore not maintaining my L and R as set up in my sequence
The problem is on exporting that since Tracks 01 and 02 are bounced down to 1 + 2 it means that my Track 01 (Panned L) is getting bounced down onto my Track 02 aswell and thus it does not remain seperate. Has anyone delivered a similar format for a broadcaster and come across this problem with Premiere Pro and know a solution?
Any help would be much appreciated
Thanks
Eamonn

Audio problems when exporting files from Premiere Pro CS5

I try to post in English.
I have audio problems in Premiere Pro CS5 when exporting a film.
I cut an interview. The sound seems not to be synchronized when exporting a file. It doesn´t matter what file format I export. On cutting points the sound is different to the sound I hear in premiere. In premiere the audio sounds very good but in exported file I hear cracks on cutting points.
When I reimport the audio file an put it in the timeline the synch point is correct but the interview differs about 2 frames to the original audio in premiere.
The material was filmed on Sony ex3. The files are XDCam HD. I have updated the production suite.
Thanks for answers
Frieder

Also, make sure that you check the box marked "Export Audio" if you want a MP4 extension.

Premiere Pro CS5 crash when adjusting audio gain

Premiere Pro CS5 crash when adjusting audio gain
The same on another workstations.
Have any idea?

Hi Dennis,
I just had a go and can reproduce the problem straight away too.
Created a new project then a new XDCAM EX 1080p25 sequence. Imported a short Sony PMW-350 clip. Dragging it straight to the timeline and then setting audio gain is OK (Source channel mapping preferences set to mono).
However, if I Modify - Audio Channels and then set track format as stereo or mono as stereo and then drag the clip to the timeline and right click - gain, Premiere crashes about 1/2 to 1 second after the audio gain dialogue box appears. Error log below if it's useful.
Asus Rampage III extreme
Intel i7 980x @ 3.33GHz
24Gb ram
Windows 7 64 bit
Using onboard sound - Realtek HD 6.0.1.6037
Incidentally, I tried with both the default Windows 7 audio drivers and then the Realtek HD drivers installed (I'd previously forgotten to install the Realtek driver when I built the PC)
Log Name:      Application
Source:        Application Error
Date:          12/08/2010 14:28:51
Event ID:      1000
Task Category: (100)
Level:         Error
Keywords:      Classic
User:          N/A
Computer:
Description:
Faulting application name: Adobe Premiere Pro.exe, version: 5.0.1.0, time stamp: 0x4bf119d2
Faulting module name: MSVCR90.dll, version: 9.0.30729.4926, time stamp: 0x4a1750b0
Exception code: 0xc0000005
Fault offset: 0x000000000001dfcd
Faulting process id: 0x16ec
Faulting application start time: 0x01cb3a21ad8357e4
Faulting application path: C:\Program Files\Adobe\Adobe Premiere Pro CS5\Adobe Premiere Pro.exe
Faulting module path: C:\Windows\WinSxS\amd64_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.4926_none_08e1a05ba 83fe554\MSVCR90.dll
Report Id: 8b5dda37-a615-11df-8de4-20cf3011131b
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Application Error" />
    <EventID Qualifiers="0">1000</EventID>
    <Level>2</Level>
    <Task>100</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2010-08-12T13:28:51.000000000Z" />
    <EventRecordID>2401</EventRecordID>
    <Channel>Application</Channel>
    <Computer></Computer>
    <Security />
</System>
<EventData>
    <Data>Adobe Premiere Pro.exe</Data>
    <Data>5.0.1.0</Data>
    <Data>4bf119d2</Data>
    <Data>MSVCR90.dll</Data>
    <Data>9.0.30729.4926</Data>
    <Data>4a1750b0</Data>
    <Data>c0000005</Data>
    <Data>000000000001dfcd</Data>
    <Data>16ec</Data>
    <Data>01cb3a21ad8357e4</Data>
    <Data>C:\Program Files\Adobe\Adobe Premiere Pro CS5\Adobe Premiere Pro.exe</Data>
    <Data>C:\Windows\WinSxS\amd64_microsoft.vc90.crt_1fc8b3b9a1e18e3b_9.0.30729.4926_none_08e 1a05ba83fe554\MSVCR90.dll</Data>
    <Data>8b5dda37-a615-11df-8de4-20cf3011131b</Data>
</EventData>
</Event>

Why does Premiere Pro CS5 process audio source before exporting clip in AME CS5?

Hello everyone, my first post here. I am currently trying out the trial CS5 Master Collection on my MacBook Pro. I've been using Premiere Pro CS5 to put together family videos. I select a certain portion of a sequence and queue it for export in Media Encoder CS5 in the format H.264 for iPod with video and audio.
Now in AME I have a queue list of about 5 clips from the sequence. But when I hit the Start Queue button, the bottom left of the progress bar states "Adobe Premiere Pro processing audio source from [then file name]" for all 5 clips from the sequence then creates the first output file.
Then it moves to encode the second and again states "Adobe Premiere Pro processing audio source from [then file name]" for all 5 clips of mt sequence then spits out only the second output file.
This continues for the remaining 3 output files. The total sequence length is ~32 minutes with transitions and it takes about 35 minutes to export which is all consumed by the process audio source of the 5 clips in my sequence for 5 separate times.
Is there a certain reason why Media Encoder or Premiere Pro does this process of audio source? Is this process necessary or needed? I experimented with choosing different output formats but the results are the same. Any help would be appreciated, thanks.

Now that's pretty good follow-up to your first post, and quickly too! Nice detective work.
As you have found, there is basically a Render/Replace operation going on in PrPro, to get the material in the correct form for AME.
Thank you for reporting, as it saved me, and others, from basically saying what you said.
Good luck, and sorry that you beat us to the punch.
Hunt

How to set your playback in Premiere Pro CS5.5 with Tascum 144 Audio Interface?

I have an Audio Interface Tascum 144 and i want Premiere Pro CS5.5 to Play it from my tascum, except my computer speakers how can i change this setting?

Go into the PPRO Preferences under Audio... In there select the TASCAM interface...

Audio Export und andere Probleme Premiere Pro CS5

Ich habe folgende Probleme mit Premiere Pro CS5:
1. Sobald ich eine Sequenz exportiere (egal welches Format, auch wav als nur Audio) scheint der Ton verschoben. Ich habe Interviews zusammengeschnitten und die Schnittpunkte sind nicht so, wie ich sie in Premiere höre. Es ist, als wäre der Ton um ein paar Frames verschoben. Ebenso sind knackser im Audio zu hören, die ich in Premiere nicht höre. Woran liegt das?
2. Ich hatte mehrere mp3 in Premiere importiert. Die Arbeitsspeicherauslastung stieg auf 7,32 GB (8GB installiert), der Computer wurde langsam und Premiere reagierte nicht mehr. Die Festplatte schrieb andauend Daten in C/Benutzer/../AppData/Roaming/Adobe/Premiere/5.0/metadataCaches. Nachdem ich die Files in wav umgewandelt hatte und die mp3s ersetz hatte funktionierte alles einwandfrei. Premiere Pro CS5 scheint ein ernsthaftes Problem mit Audio Files zu haben, die ich bei 2.0 nicht festgestellt habe.
3. Woran liegt es, dass ich, wenn ich HD Files mit quadratischen Pixeln als mpeg2 für eine DVD raus rechnen will schwarze Ränder an den Seiten erscheinen. Stimmt da etwas mit der Umrechnung von 1920x1080 auf PAL nicht? FinalCut hat das Problem nicht.
4. Wenn ich eine Sequenz von Premiere in After Effects sende habe ich zwar eine Komposition in After Effects aber leider keinen Inhalt. Woran liegt das?
Vielen Dank für eine schnelle Antwort,
Frieder

Remix using the Laptop's internal speakers. They seem to be the more accurate.

Premiere pro cs5 : audio and video sync issue with .aiff file format

I am using premiere pro cs5 on MAC and facing issue with audio and video sync using .AIFF file format for audio unable to make it work.
Is there any solution to this issue or any work around?
Thanks in advance.
Vinay

Hi,
hmmm, well that settles that...
Here's a link to info about an open source free program to convert....for mac
http://www.ehow.com/how_5072563_convert-files-wav-files-freeware.html
Good luck
Rod

Audio Issues Premiere Pro CS5.5

Hi All!
New here...
I'm using Premiere Pro CS5.5 on a Mac Pro, running Lion. Had no issues with it at all until now.
Issue:
For some reason, when I'm looking at footage in the source window the audio doesn't play. However if I leave it for a few minutes it 'compiles', the best way I can think of describing it as is buffering. but if I skip forward a substantial amount of time, say 3-5minutes the audio fails. I also have a slight problem with the video footage stuttering when viewing in the source window.
Looking back at previous edits that I've done they all work fine, its only effecting new edits.
I've trawled the net looking for answers, followed all the hints I've found from clearing the Media Cache database to reinstalling the entire collection to changing the audio hardware output
However nothing works.
Any suggestions?
Cheers,
Stu

They're the same as I"ve always used.
However, the problem seems to have sorted itself now? All I can think it is, is that Premiere is having to maybe convert the audio codecs?
It was just a bit weird that it suddenly started happening.
But as per your request, I think this is the right info:
Type: QuickTime Movie
File Size: 3.1 GB
Image Size: 720 x 576
Frame Rate: 25.00
Source Audio Format: 48000 Hz - 16 bit - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00:14:24:05
Average Data Rate: 3.6 MB / second
Pixel Aspect Ratio: 1.4587
Thanks for the help

Fix for crash in After Effects CS5 and Premiere Pro CS5 when Joesoft Hear audio enhancer installed

After Effects CS5 and Premiere Pro CS5 both can crash due to a conflict with the Joesoft Hear audio enhancer.
We've just gotten confirmation from Joesoft that they've released a beta version of Hear that doesn't conflict with After Effects CS5 and Premiere Pro CS5. We're recommending that our customers who also use Hear install the 1.0.5b2 (build 490) beta version of Hear.
Let us know on this forum thread whether this solution works for you. We on the After Effects and Premiere Pro teams will monitor this thread for feedback, and we'll make sure that the folks at Joesoft get the information that they need, too.
When reporting back, be sure to let us know whether you've installed the Premiere Pro CS5 (5.0.2) update and After Effects CS5 (10.0.1) update.

After 2 days trying to get AE and Premiere past the mediacore initialization message, I finally stumbled on this little message. Updating Hear definitely solves the problem!

Premiere Pro CS5 Performance Issues

Hi. I have been using Premiere Pro CS5 5.0.3 for editing videos that I shoot for several years now. I offload all the video files I shoot from a Canon XHA1 camera from a SanDisk compactflash card to a Drobo S Raid 0 array (all the drives in the Drobo are Seagate Barracuda 7200 rpm drives) that I have hooked up (via an eSATA cable).
This has worked well for me but I have been noticing that I am now getting more dropped frame errors both in the program and source monitors. I started a new project yesterday:
General
Editing mode: DV NTSC
Timebase: 29.97fps
Video Settings
Frame size: 720h 480v (1.2121)
Frame rate: 29.97 frames/second
Pixel Aspect Ratio: D1/DV NTSC Widescreen 16:9 (1.2121)
Fields: Lower Field First
and when I imported the footage into Premiere Pro I started getting more dropped frames and sluggish playback as to render Premiere Pro very aggravating. It is still usable but the situation is growing worse. Here are my system settings that I dumped from Belarc:
Operating System
System Model
Windows 7 Professional (x64) Service Pack 1 (build 7601)
Install Language: English (United States)
System Locale: English (United States)
Installed: 4/1/2011 12:30:28 PM
Boot Mode: BIOS (Secure Boot not supported)
No details available
Processor a
Main Circuit Board b
3.20 gigahertz AMD Phenom II X4 955
512 kilobyte primary memory cache
2048 kilobyte secondary memory cache
6144 kilobyte tertiary memory cache
64-bit ready
Multi-core (4 total)
Not hyper-threaded
Board: ASUSTeK Computer INC. M4A79XTD EVO Rev X.0X
Serial Number: MT7001K65700722
Bus Clock: 200 megahertz
BIOS: American Megatrends Inc. 2102 06/17/2010
Drives
Memory Modules c,d
13096.83 Gigabytes Usable Hard Drive Capacity
10398.62 Gigabytes Hard Drive Free Space
HL-DT-ST BD-RE BH10LS30 ATA Device [Optical drive]
PLEXTOR DVDR PX-760A ATA Device [Optical drive]
Drobo 3rd Gen DRDR3- ATA Device [Hard drive] (8796.09 GB) -- drive 3, SMART Status: Healthy
Kingston FCR-HS219/1 USB Device [Hard drive] -- drive 4
Kingston FCR-HS219/1 USB Device [Hard drive] -- drive 7
Kingston FCR-HS219/1 USB Device [Hard drive] -- drive 5
Kingston FCR-HS219/1 USB Device [Hard drive] -- drive 6
Seagate FreeAgent GoFlex USB Device [Hard drive] (1000.20 GB) -- drive 8, s/n NA05WRQ4
ST31000528AS [Hard drive] (1000.20 GB) -- drive 1, s/n 6VP3PB7D, rev CC38, SMART Status: Healthy
ST32000542AS [Hard drive] (2000.40 GB) -- drive 2, s/n 5XW0A59J, rev CC34, SMART Status: Healthy
ST3300622AS [Hard drive] (300.07 GB) -- drive 0, s/n 4NF1TJ5M, rev 3.AAH, SMART Status: Healthy
12288 Megabytes Usable Installed Memory
Slot 'DIMM0' has 4096 MB (serial number SerNum00)
Slot 'DIMM1' has 4096 MB (serial number SerNum01)
Slot 'DIMM2' has 2048 MB (serial number SerNum02)
Slot 'DIMM3' has 2048 MB (serial number SerNum03)
Local Drive Volumes
c: (NTFS on drive 0) *
300.07 GB
158.49 GB free
d: (NTFS on drive 1)
1000.20 GB
771.85 GB free
f: (NTFS on drive 2)
2000.40 GB
1462.25 GB free
g: (NTFS on drive 8)
1000.20 GB
939.29 GB free
p: (NTFS on drive 3)
8795.96 GB
7066.74 GB free
* Operating System is installed on c:
Network Drives
None discovered
Users (mouse over user name for details)
Printers
local user accounts
last logon
Mark Mecca
10/22/2014 1:50:04 PM
(admin)
QBDataServiceUser21
10/22/2014 1:50:50 PM
local system accounts
Administrator
7/14/2009 1:08:59 AM
(admin)
Guest
never
HomeGroupUser$
never
Marks a disabled account; Marks a locked account
Amyuni Document Converter 2.50
on LPT1:
Epson ESC/P-R
on USB001
EPSON Stylus Photo RX580 Series
on USB001
HP LaserJet Professional P1102w
on USB004
Microsoft Shared Fax Driver
on SHRFAX:
Microsoft XPS Document Writer
on XPSPort:
StudioJet 50
on USB002
Controllers
Display
ATA Channel 0 [Controller] (3x)
ATA Channel 1 [Controller] (3x)
Standard Dual Channel PCI IDE Controller (3x)
NVIDIA GeForce GTX 285 [Display adapter]
LG W2340 [Monitor] (23.1"vis, s/n 001NDCRGL339, January 2010)
Samsung SyncMaster [Monitor] (20.2"vis, s/n BR20HCGL502449, May 2006)
Bus Adapters
Multimedia
Microsoft iSCSI Initiator
Standard Enhanced PCI to USB Host Controller (2x)
Standard OpenHCD USB Host Controller (5x)
Blackmagic Audio
Blackmagic DeckLink WDM Streaming
Blackmagic Driver
High Definition Audio Device
NVIDIA Virtual Audio Device (Wave Extensible) (WDM)
Virus Protection [Back to Top]
Group Policies
Norton AntiVirus Version 21.6.0.32
Norton Security Suite
None discovered
Communications
Other Devices
Microsoft ISATAP Adapter
↑ Realtek PCIe GBE Family Controller
primary
Auto IP Address:
192.168.1.104 / 24
Gateway:
192.168.1.1
Dhcp Server:
192.168.1.1
Physical Address:
E0:CB:4E:E5:E8:D3
Connection Speed:
100 Mbps
Teredo Tunneling Pseudo-Interface
Networking Dns Servers:
75.75.76.76
75.75.75.75
1394 OHCI Compliant Host Controller (Legacy)
HID-compliant consumer control device
HID-compliant device
USB Input Device (3x)
HID Keyboard Device
HID-compliant mouse
USB Composite Device
USB Mass Storage Device (2x)
USB Printing Support
USB Root Hub (7x)
Generic volume shadow copy
N:\
O:\
Q:\
R:\
My question is how do I trouble shoot this problem? I suspect that my video card is getting old and needs to be replaced but I don't want to buy another one as yet (especially when I don't know if it will solve the problem).

Do the PPBM5 Benchmark and send the results to me by PM, in addition to sending the results to Bill as indicated. I'll have a look at what might be going on here.

4 audio channels in Premiere Pro CS5.5

Similar Messages

Maybe you are looking for