4 CPU server - add 5th for OS?

Good day all.
We had an issue today that cause a DB server (4 CPU SQL VM) to run at 100% CPU load. I was able to get onto the RDP session but then it was too hard to navigate around due to slow response. I was thinking of adding a 5th CPU and set the SQL affinity
to only use 4 of the 5 CPU and reserve the 5th for the OS. Thinking that if something like this happens again, I can still get to my troubleshooting tools. What’s your thoughts on this? Thanks in advance.

Hello,
That all depends on what the issue was. If was an issue with the VM or OS itself, this probably won't do anything. If it was an issue with SQL Server using all of the CPUs, I would first look at what your maxdop settings were and if it might make sense to
implement resource governer should it come from some specific source such as your reporting area.
Since we don't know the root cause, it's hard to tell you if it'll make any sense or not. Either way, I wouldn't use affinity as a solve.
Sean Gallardy | Blog |
Twitter

Similar Messages

Lion and lion server add on for Mac Mini Server

I bought the Lion OS and Lion Server add on for my Mac Mini Server which runs Snow Leopard Server. When trying to install the Lion,
it requests the Add on to be available, however the add on requests the Lion to be already installed before it can be downlaoded through
App store. I made my purchases over the phone as neither was available in stores anymore. Egg and chiken dilema.
I do not have a physical DVD with the Snow Leopard (Client) to follow some of the instructions I have read in the communities. Any
workaround?

For the Mini you must have Lion client installed to purchase the Server. You can download Lion from the Mini while it's running Snow Leopard. Once Lion is installed you should then be able to purchase the Server.
Unlike past OS X Server releases the bulk of the software is within the Lion client. The Server is more or less a type of add-on to provide all the Server utilities and support. It's a relatively small download compared to the client.

Reporting Services Add-in for Sharepoint- does it need an SQL Server license?

In a new project we will be creating an SSRS in Sharepoint integrated mode. For this we'll need SQL Server and Sharepoint on that box.
We'll also have one or more SharePoint Web Front End (WFE) servers. To allow them to connect to the SSRS-in-sharepoint-mode box, and to present the user with the right user interface for doing so, I believe we can install the Reporting Services Add-In for
Sharepoint on the WFE servers.
The question is, do we need to have SQL Server license for each WFE server where we use the Reporting Services Add-In, or is it free to use?
We've had advice that we need to buy a SQL Server license everywhere we use the add-in, but I am not sure this is correct.
Thanks in advance,
Rich

Hello there,
The Reporting service Add-in for SharePoint can be downloaded free on Microsoft Download site. That means it does not need any license on the add-in.
Regards,
Edward
Edward Zhu
TechNet Community Support

SQL Server Reporting Services Add-In for SharePoint not installing properly

Environment: Windows Server 2008R2, SQL Server 2012, SharePoint 2013 Enterprise
When I run the install for SQL Server 2012 Reporting Services Add-in for SharePoint it SHOULD install to c:\program files\common files\Microsoft Shared\Web Server Extensions\14 AND 15. Specifically it should drop a mess of ASPx pages for admin to the \templates\Admin\ReportServer
folder. In this environment it only pushes them to the 14 folder and not the 15. Any ideas on why this would happen? I have not ever seen this before and it is hosing the install completely.

Hi Gouranga,
According to your description, when you install the SQL Server 2012 Reporting Services Add-in for SharePoint 2013, you find the files are installed into the folder for sharepoint 2010(..../14). Right?
In Reporting Services, Not all features are supported in all combinations of report server, Reporting Services add-in for SharePoint, and SharePoint Products. Please see the linke below:
Supported Combinations of SharePoint and Reporting Services Server and Add-in (SQL Server 2012)
As you can see in the link, the SQL Server 2012 Reporting Services Add-in is only for Sharepoint 2010. This the reason why it's installed into the file for sharepoint 2010.
Reference:
Where to find the Reporting Services add-in for SharePoint Products (SharePoint 2010 and SharePoint 2013)
Install or Uninstall the Reporting Services Add-in for SharePoint
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Message: "Waiting for App Store to download Mac OS X Server Add on"

Trying to install 10.7 (from 10.6.8) on Mac Mini server 4,1. I don't use it as a server, and don't know anything about that.I get a message "Waiting for App Store to download Mac OS X Server Add on" check download at App store. There is none. Help?
Mac Mini Server 4.1/2.66 GHz/Intel Core 2 Duo/8 GB Memory

Ran into this myself on a new MacMini Server. I renamed the ServerVersion.plist file in /System/Library/CoreServices/. That allowed the install to start. Unfortunately it seems the installer is setup to install that at the same time. I renamed the file back before the restart and it complained on restart that the server install wasn't found.
So I thought I would try downloading it on another computer with Lion. That didn't work either. As soon as it finished download it installed and deleted the installer.
What a pain.
If you can start from scratch, you should be able to rename the file, do the Lion install then after the Lion install rename it back. Then do the server install. I'm not sure what that will do to existing server configs though. There must be some reason Apple set up the Lion installer this way.
Oh, now I can't reboot into my existing OS. It keeps rebooting into the installer. Tried the option key and both options are named something like base os. Neither boots my existing Snow Leopard. Gonna have to get an external DVD drive and install from scratch I think. Luckily this is a new server not in production, so not a big deal. I hope people with production machines read the boards and tread carefully.

Trying to install Visio 2010 add-in for rack server virtualization - fails

I am running Visio 2010 Professional 32-bit. I am running it on a Windows 7 Enterprise machine, 64 bit. I am trying to install the Visio 2010 Add-In for Rack Server Virtualization. When running the installer I get the following message:
"Setup cannot continue because Visio Add-In for Rack Server Virtualization requires that Visio 2010 Professional or greater be installed. Please install Visio and run setup again."
I downloaded the add in from here: http://www.microsoft.com/download/en/details.aspx?id=26233
I have Visio 2010 Professional installed. What now?

Hi,
I have reproduce in Windows 7 SP1 Enterprise 64-bit, Visio 2010 Premium 32-bit, it work fine.
If you did not install Windows 7 SP1, you can download service pack visit following link:
http://support.microsoft.com/kb/976932
Make user you have administrator permission, and you can try to run this program as compatibility mode test if it work.
If you install this Add-in directly after install Visio 2010, it recommended restart computer and then install Add-in.
Best regards
William Zhou CHN
TechNet Community Support

What is meant by waiting for app store to download mac os x server add on.

Can't get past that step to upgrade xserver from 10.6.8 to 10.7. I am trying to upgrade my xserver 10.6.8 to 10.7. I have purchased the os x lion and the lion server, and they are both downloaded on the machine, but it will not let me get past the step of waiting for app store to download mac os x server add on. Anyone know what that is or where I can get it? App store never starts a download. tia

Ran into this myself on a new MacMini Server. I renamed the ServerVersion.plist file in /System/Library/CoreServices/. That allowed the install to start. Unfortunately it seems the installer is setup to install that at the same time. I renamed the file back before the restart and it complained on restart that the server install wasn't found.
So I thought I would try downloading it on another computer with Lion. That didn't work either. As soon as it finished download it installed and deleted the installer.
What a pain.
If you can start from scratch, you should be able to rename the file, do the Lion install then after the Lion install rename it back. Then do the server install. I'm not sure what that will do to existing server configs though. There must be some reason Apple set up the Lion installer this way.
Oh, now I can't reboot into my existing OS. It keeps rebooting into the installer. Tried the option key and both options are named something like base os. Neither boots my existing Snow Leopard. Gonna have to get an external DVD drive and install from scratch I think. Luckily this is a new server not in production, so not a big deal. I hope people with production machines read the boards and tread carefully.

Waiting for App Store to download Mac OS X Server Add On.

Hi there,
I am trying to upgrade Mac OS X Server to Mac Lion Server. I get this message when i try to install the OS X Lion
Waiting for App Store to download Mac OS X Server Add On.
Please help.

the message is normal, you are requested to wait!
check that, when "install" is pressed in App Store a new icon should go to your dock (the "install MacOSX lion" application itself).
the upgrade is up to 4Gb and apple serves at no more than 200-400Kbps (at least to my country), so be patient.
If you need more patience, but JUST NOOOOOWWW!!! =)
then you can see your network activity in Utilities -> Activity Monitor -> Network
Let us know if there is no Activity during the download!
And also if you successfully install lion!

Why Waiting for App Store to download Mac OS X Server Add On. stopping Lion download?

I just purchased Mac os x lion and this message is popping up : Waiting for App Store to download Mac OS X Server Add On.
Help! How do i get it to install?

Ran into this myself on a new MacMini Server. I renamed the ServerVersion.plist file in /System/Library/CoreServices/. That allowed the install to start. Unfortunately it seems the installer is setup to install that at the same time. I renamed the file back before the restart and it complained on restart that the server install wasn't found.
So I thought I would try downloading it on another computer with Lion. That didn't work either. As soon as it finished download it installed and deleted the installer.
What a pain.
If you can start from scratch, you should be able to rename the file, do the Lion install then after the Lion install rename it back. Then do the server install. I'm not sure what that will do to existing server configs though. There must be some reason Apple set up the Lion installer this way.
Oh, now I can't reboot into my existing OS. It keeps rebooting into the installer. Tried the option key and both options are named something like base os. Neither boots my existing Snow Leopard. Gonna have to get an external DVD drive and install from scratch I think. Luckily this is a new server not in production, so not a big deal. I hope people with production machines read the boards and tread carefully.

[svn:bz-trunk] 7643: Add app server specific excludes for jboss5 and websphere7.

Revision: 7643
Author:   [email protected]
Date:     2009-06-08 13:32:14 -0700 (Mon, 08 Jun 2009)
Log Message:
Add app server specific excludes for jboss5 and websphere7.
Modified Paths:
    blazeds/trunk/qa/features/excludes.properties

What is the difference between: "Place..." or "Add files for Upload..."?

Where can I get information about the detailed differences between the commands "Place..." and "Add Files for Upload..." of the Files menu?
Understand that in both cases the files are linked and not embedded. But what further differences are there?
I came across this issue because widget 039 (Animated Image Rollovers) from MuseThemes works only if you use the "Add Files for Upload..." option.
Thanks,
Daniel

Hi Daniel,
There are a few differences in both the options-
Place is used to add content to page (rendered) while Add Files for Upload... is used to upload files to your site but not on page (not rendered).
Placed images are published to /images folder on the server while images added using Add Files for Upload... option are published to the /assets folder on the server.
Placed images have a chance of getting renamed (if resized/interpolated in Muse) upon publish while images added using Add Files for Upload... retain their names.
Place can be used to add limited file formats like jpg/png/psd/swf/oam etc while you can upload almost any type of file using Add Files for Upload...
You don't see Placed content in the Hyperlinks dropdown for linking while files added using Add Files for Upload... show up in the Hyperlinks dropdown so that you may link to them and allow download.
Both serve different purposes and Add Files for Upload... is preferred by Widget Developers because it gives more control over uploaded content and assurance that file location and name will be as expected.
Hope the above give you clarity on the basic difference.
Cheers,
Vikas

Is RoboHelp Server the solution for us?

Hi all,
I'm trying to figure out whether RH Server is the solution for us. I've seen a few similar posts in the forums, but none that really answer my specific questions. I'm hoping for feedback from someone with experience in RH Server, who is perhaps in a similar situation to us.
We are a software development company, creating desktop software for PCs. We have three main applications, and approximately 20,000 users. I am the company's (only) Tech Writer.
Currently I provide documentation (user guides) to our clients in the form of the good ol' CHM file. I develop these in RH8. Each of our applications is bundled with an installed CHM file which users access by pressing F1. I'm sure you're all familiar with this process. Our users run our software on their own systems, completely independent of us - there's no connection to us whatsoever. However, they all have Internet access, as it's a requirement for them to be able to use certain functionality within our applications. Hold that thought.
I also write Knowledge Base Articles in MS Word, as PDFs, which users access via our web site. Internal to our organisation, I provide KBAs and other such material for our Technical Support staff. These aren't available/accessible to the public. I write these in Word because they need to be sent around to a team of reviewers from time-to-time, and whilstI'm the only person with RH installed, everyone has Word.
What I'm hoping to achieve with RH Server is this:
Do away with the old CHM files that our users have. They're just awful. I'm hoping that in future, when our users press F1 from within our applications, they will be taken to a corresponding page on a web site or AIR page similar to what the Adobe Help looks like when we access it from RoboHelp. Forgive my ignorance if I've used incorrect terminology. That way they'll always be reading the latest Help content, live, online, instead of what I wrote last time we sent a product update out. I imagine our programmers will have to edit the functionality behind the action of our users pressing F1 in our applications. Has anyone done this? Are there any issues we should be aware of? What happens if our users don't currently have Internet access, for example - is it possible to call a local version of the Help instead, if this is detected? Has anyone done this with a similar number of users to us? We could well have 100s of users trying to access the system simultaneously.
Gather feedback from users. From what I understand, we'll be able to use RH Server to see which Help topic/content is being viewed, and also receive feedback from users. Can anyone give me feedback on their experiences with this? Any tips/hints/issues I need to be aware of? Is it possible for us to determine which users accessed which content? Remember, the idea is that users should be able to access this content by pressing F1 - I don't want them to have to sign in every time they need to access our Help system - it should be seamless to them. So, I'm wondering how it would be possible to track user usage without making them sign in. This is important to us because some of our content is region-specific, and it would be handy to know if users from those regions are actually accessing the Help content that relates to them.
Host our internal documentation on the same server as our public documentation. Is it possible to host all of our internal, private documentation on the same RH Server, making it available to our Tech Support team (and other internal teams) only? I imagine we could do this by password-protecting it, but I want to ensure that the public don't even know it exists. ...and our Tech Support people would not be impressed with having to sign in every time they wanted to access their Knowledge Base. Any tips here regarding locking down / restricting access to content?
A quick note about collaboration:
Currently, although the Help menus are developed in RH, the KBAs and other PDF documents are written in MS Word. I send them around to a team of reviewers who add their comments/edits and send them back to me. From what I understand, this is something I can do with RH10 - export PDFs and send them around for review, combining the results later, at which time I give them a final review before publishing. Have I understood this correctly? Does RH Server play a part in this process? Can I use RH Server's feedback capabilities as a mechanism for my review team to make edits/comments? I guess I'm trying to get an understanding of how sophisticated the RH Server feedback system is. If I can use RH Server to have the team read/review documents, it'll save me having to manage a bunch of Word documents that I email them. It'll also minimise the chance that a redundant document gets distributed by mistake - something that can occur because people use their locally-saved documents I emailed them earlier, instead of the finals.
Thank you.

Hi, symmetricalMan
Let's see if I can tackle some of these "inline". There are a lot of moving parts to your system (you're a busy guy!)
I only have time for a few of these. Perhaps Colum McAndrew and others will chime it with their experiences.
>>they will be taken to a corresponding page on a web site or AIR page similar to what the Adobe Help looks like when we access it from RoboHelp.
It would be WebHelp Pro in the scenario you mention (not AIR Help).
By "taken to a corresponding page" you are referring to Context Sensitive Help which RoboHelp Server does support (including your F1 scenario).
>>What happens if our users don't currently have Internet access, for example - is it possible to call a local version of the Help instead, if this is detected?
Hmm. You could either package a plain WebHelp (not Pro) output and distribute for access on a share drive. The detection thing would be up to your developers. Come to think of it, AIR Help does have a potential alternative here which might be worth looking into. Obviously, there would be two systems to maintain. I'm not up to date on it, but you'll find info here in the online help: http://help.adobe.com/en_US/robohelp/robohtml/WS81F63111-6ACF-4a02-B2B2-461FEBFA8093.html
>>.we'll be able to use RH Server to see which Help topic/content is being viewed, and also receive feedback from users.
Actually, the "feedback" is anonymous (no names are collected.) You can however, create "Areas" and analyze the traffic on topics according to sub-sets of your users.
The feedback is not direct from the users. In other words, RoboHelp Server (at least for now) does not support Commenting (as AIR Help does). So Feedback Reports are derived from the end-users "surfing" your site and collecting their search terms verbatim to get an idea of what they are searching for in order to improve your content.
>>So, I'm wondering how it would be possible to track user usage without making them sign in.
RH Server Sites do not have to be "Protected" by authentication. It is your choice. You can have some sites (called Areas) that are authenticated and some sites that are not authenticated, all on the same RH Server. RoboHelp Server uses a database and can authenticate users (by setting up protected "Areas".) However, my networking knowledge is limited and you would have to ask someone else about "persistent logins" etc.
>>content is region-specific, and it would be handy to know if users from those regions are actually accessing the Help content that relates to them.
Yes, you can do this. This is where RoboHelp Server can be used to create "Areas" for different content to be delivered to different audiences.
>>Is it possible to host all of our internal, private documentation on the same RH Server,
Yes you can. However the Tech Support sign in scenario question would have to be answered by someone else. It's hard to know from where I sit.
>>RH10 - export PDFs and send them around for review, combining the results later, at which time I give them a final review before publishing
Yes, this workflow would seem to work for you. However, RoboHelp Server plays no role in this review one way or the other. There are many alternatives for sharing the PDF which is described in the documentation.
See #6 on this page:
http://help.adobe.com/en_US/robohelp/robohtml/WS1b49059a33f77726-2db1c75912bc47baaf8-7ffb. html
You should also download the Adobe RoboHelp Server Reviewer's Guide which also has videos embedded.
http://www.adobe.com/support/documentation/en/robohelp/9/AdobeRoboHelpServer9_ReviewersGui de.pdf
Hope this helps
John Daigle
Adobe Certified RoboHelp and Captivate Instructor
Evergreen, Colorado
www.showmethedemo.com
Twitter: @hypertexas

Add on for SAP B1 9.0 32 bit is disconnected

Hi,
I have developed a simple add on for SAP B1 9.0 32 bit. The add on is working fine in development environment. But while working on a Terminal Server client, the add on is getting disconnected after some time. This is happening for all terminal server users. Has anybody else faced a similar issue? Please suggest the possible reason and solution for this problem.
Regards,
Victor

Hi Maik,
1. The add on is getting connected initially, but is idle and is getting disconnected after some time. The addon is only listening to BOM and production order form events.
2. I could not look at the client environment myself, but logging was enabled for any unhandled exception and still no log was generated. I am assuming that the application was not crashing. I will put in more information on Monday, when I get access to the client environment.
Regards,
Victor

Wait on the Database Engine recovery handle failed. Check the SQL server error log for potential causes in SQL Server 2012 Developer Edition

I m using SQL Server 2012 Developer Edition. Even I tried 2012 express and enterprise edition but all
gave same error. I browsed msdn blog. But nothing help me out.
Below is the error log details--
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2013-10-21 12:58:05
End time: 2013-10-21 13:52:30
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: CROY-TOSH
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: C:\Users\CRoy\Downloads\SQL Server 2012 Developer Edition (x86 and x64) - DVD (English)\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLSERVERAGENT
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Backup
ASCOLLATION: Latin1_General_CI_AI
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Config
ASDATADIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Data
ASLOGDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSSQLServerOLAPService
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: CRoy-TOSH\CRoy
ASTEMPDIR: C:\Program Files\Microsoft SQL Server\MSAS11.MSSQLSERVER\OLAP\Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: ROY
CLTRESULTDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\ResultDir\
CLTSTARTUPTYPE: Manual
CLTSVCACCOUNT: NT Service\SQL Server Distributed Replay Client
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: C:\Program Files (x86)\Microsoft SQL Server\DReplayClient\WorkingDir\
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
CTLRSTARTUPTYPE: Manual
CTLRSVCACCOUNT: NT Service\SQL Server Distributed Replay Controller
CTLRSVCPASSWORD: <empty>
CTLRUSERS: CRoy-TOSH\CRoy
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, BIDS, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, DREPLAY_CTLR, DREPLAY_CLT, SNAC_SDK, MDS
FILESTREAMLEVEL: 2
FILESTREAMSHARENAME: MSSQLSERVER
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT Service\MsDtsServer110
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AI
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: CRoy-TOSH\CRoy
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: SQL Server Data Tools
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Master Data Services
Status: Passed
Feature: Distributed Replay Client
Status: Passed
Feature: Distributed Replay Controller
Status: Passed
Feature: Integration Services
Status: Passed
Feature: Data Quality Client
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20131021_125116\SystemConfigurationCheck_Report.htm

Hi,
This 3rd time I followed this link. But nothing new, same error.
Can you please tell me how to do follow, I cannt do the 1st step, how to change the local system to windows level account, vice-versa. It is shown mine as
Server Configuration Manager(Local)
From here I folllowed the steps ---[I cannt insert link/image :-(]
SQL 2008/R2 setup fails with "Wait on the database engine recovery handle failed"
If I right clicked on SQL Server Service, there is no option to change the account.
Hello,
Thanks for your patience,did you tried stesp mentioned in below article
http://blogs.msdn.com/b/sqljourney/archive/2012/03/16/sql-2008-r2-setup-fails-with-quot-wait-on-the-database-engine-recovery-handle-failed-quot.aspx
To resolve it, follow these steps:-
When the installation throws this error, click on OK and allow it to proceed. It will fail for Database Engine, but the SQL Server service should have
been created. Check the Services console.
If the service is present, perform the following steps:-
1. Go to SQL Server Configuration manager, right click on the SQL Server service, and change the service account (if it is local system, give
it a windows level account, and vice-versa). It might throw a WMI error but you will see the account getting updated anyway. If not, then use the Services console. Change the account for SQL Agent as well.
Use this link to change sql server service account
http://technet.microsoft.com/en-us/library/ms345578.aspx
2. Next, try to start the service. It should come online.
3. However, you will not be able to log in to the SQL Server
4. Now stop the service and start it from the command prompt using -m -c -T3608 parameters.
5. Now try logging in to the server using admin connection from sqlcmd (sqlcmd admin:<server name>\<instance name> ...)
6. Once logged in, use the sp_addsrvrolemember '<domain\username>','sysadmin'.
Also add the builtin/administrators to the sysadmin role
7. Now stop the service from the command prompt and start it from SQL Server configuration manager
You should be able to log in to the server now.
Hope this helps someone.
Please revert if it helps or even if it does not
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Missing shared feature Reporting Services Sharepoint and Reporting Services Add-in for Sharepoint products

Hi, when I try to install SQL Server 2012 SP1 (ISO from Microsoft Download website) on a Windows Server 2012 and try to select the shared feature options:
- Reporting Services Sharepoint
- Reporting Services Add-in for Sharepoint products
They are both missing from the list.
How do I solve this? Help!

Hello,
Did you download the SQL Server 2012 Express with Advanced Services edition from the Microsoft website? If so, this edition did not support SharePoint Integration mode.
Just as Alberto post above, Business intelligence features are not all available in all editions of SQL Server 2012. You can refer to the following link about support features in Editions of SQL Server 2012:
Reference:http://technet.microsoft.com/library/cc645993(SQL.110).aspx#Reporting
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support

4 CPU server - add 5th for OS?

Similar Messages

Maybe you are looking for