4 dimms in Neo4 Plat. only runs at DDR333, but Venice should fix that?

Now that I've added 2x256MB to my setup to get 1,5GB for Battlefield 2 and all 4 banks are filled, I can get neither the timings nor the frequency as high as I used to.
Before with 2 banks: 2-2-2-5 1T @ 205MHz
Now with 4 banks: well, all maxed out won't even get me past 193MHz.
The manual says that with 4 dimms it can only run at DDR333, that much I know.
But that was a processor limitation wasn'it? So with my Venice' suped up memory controller it should work, right?

OK let's bust a big misconception. It is a limit that an A64 can run up to 4 banks of RAM at DDR400 and over 4 banks at DDR333.
Sides do not equal banks. You can have a single sided DIMM that is 2 bank and even a Double sided DIMM that is one bank. You have to determine the number of Banks a Dimm has by the makers specs. Looking at how many sides a Dimm has is not always going to get the job done. Yes in some cases and maybe most you could be correct but you have to be sure and the only way to do this is to check with the makers to get their specs.

Similar Messages

  • MOVED: Athlon64 3200+ Venice on Neo4 Plat (no SLI) showing +10MHz but no OC

    This topic has been moved to Overclockers & Modding Corner.
    Athlon64 3200+ Venice on Neo4 Plat (no SLI) showing +10MHz but no OC

    This topic has been moved to Overclockers & Modding Corner.
    Athlon64 3200+ Venice on Neo4 Plat (no SLI) showing +10MHz but no OC

  • My 4th gen ipod touch wont sync only check marked songs, how do i fix that?

          I just got a 4th gen. ipod touch.  it works fine everything is great on it but when i try to sync only check marked songs onto it from itunes it wont sync any songs at all.  I thought i solved the problem when i clicked "autofill" in the music tab under "my devices" but all that did was randomly put songs on my ipod.  i went to the settings and unchecked "choose items randomly" and tried again but it did the same thing.  i know its not my computer cuz the same thing was happening with my old ipod.  i have "sync only checked songs" marked but it just wont work.  PLEASE HELP ME!!

    http://support.apple.com/kb/ts1567
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101

  • I downloaded  an album but some of the songs downloaded only half way. How do I fix that problem

    I bought an album yesterday and when I went to play it today I found that some of the tracks were only playing half way and the other half was blank. How do I fix that?

    If your country's iTunes Store allows you to redownload purchased tracks, I'd delete your current copies of the dodgy tracks and try redownloading fresh copies. For instructions, see the following document:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    Otherwise, I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the items that are not playing properly. If you can't see "Report a Problem" next to the items, click the "Report a problem" button. Now click the "Report a Problem" links next to the items.

  • Athlon64 3200+ Venice on Neo4 Plat (no SLI) showing +10MHz but no OC

    Hi all- I've a:
    Athlon64 3200+ Venice (no OC)
    MSI Neo4 Platinum (not SLI)
    (2) 512MB Kingston Value 3200 (200MHz) DDR (dual-channel, slots 1 and 2)
    250GB Seagate SATA
    Some kind of 16x DVD+R/W 
    Gigabyte 6600GT (stock clocking)
    Antec 450W SmartPower 2 (12V-17A + 12V-15A IIRC)
    Back story: I was having random lockups during gameplay, every 2 or 3 hours in Guild Wars (all games did it, just GW most of all). Moved RAM from slots 1 and 3 to slots 1 and 2. Didn't help. Then set PCIe clock 5 MHz ahead at the suggestion of one of these forums, which seems to have fixed the problem. (Thank you so very much all!)
    I look at PC health when I go to BIOS and it shows (with no overclocking) DDR at 1 MHz higher than normal and CPU at 2010 MHz, instead of the supposedly stock 2000 MHz.
    Could my lockup issues be related to this quirky MHz speed? (OC'ing the PCIe appears to have fixed it). I now understand PCIe was probably running asynchronous to CPU timing the entire time (and still is?)  :(
    What could cause the slight OC in RAM and CPU? I have all settings on auto for CPU voltage, which hovers around 1.4 (normal from what I see online). Interestingly, all my voltages are being reported as pretty much spot-on except the 12V, which is showing 12.5V consistently.
    Any ideas or suggestions? I'd like everything with as tight a timing as possible because I want to make sure this lockup issue NEVER comes back!
    Thanks in advance for any advice!
    EDIT: (2) 512MB oops. . !

        It think it may finally be gone, but I'll have to try tonight and tomorrow to be sure. I played Guild Wars for around 5 hours last night with no lockups.
    Here's what I did:
    Googled "PC lock up" for some crazy reason, just to see what other ideas were out there. Like 3rd link down brought me to a page where a guy had my exact same issues and same board but an ATI card. He had tried pretty much the same things too. He said he fixed it by updating his AC97 sound card drivers.
    At that moment I didn't even know what was actually on my board, but I knew it was a generic card I was probably never going to use anyway, and I didn't recall getting any sound card updates for this board. So I looked in device manager, and bingo: AC97 device under multimedia devices.      I immediately did two things to completely eliminate the rascal: updated the driver for it and promptly went to BIOS and disabled the sucker. Also disabled SATA group 2 (slots 3 and 4), the Marvell LAN because I only use one ethernet anyway (the nVidia one, which from what I was reading, was probably the more robust of the two), both RAID controllers (actually I had disabled them earlier to skip the annoying RAID setup screen), and put the PCIe bus back to 100MHz (rogue: I was wondering about possible damage over time with this too high too, so I was glad to try setting it back to normal!) Also ran Driver Cleaner to rip out the detonators even though I was putting in another nVidia, and then put in the 6800GT and installed drivers. (In case you were interested, my 3dMark05 score went from 3511 under the 6600GT to 4939 under the 6800GT! I now run in 1280x1024 at max effects and I'm completely spoiled in one night already!  )
    Anyway, one of these myriad, desperate attempts must have worked because I get neither audio stutters (should have been a freaking clue in the first place, duh!) nor lock ups.
    Since this is the first PC I've built, I was certain I had to have screwed something up hardware-wise or found some combination that had incompatibilities. If it WAS just the freaking sound card driver I'm going to leave this place in shame and never post again!    In my defense, the MSI Update utility didn't show any updated sound drivers for me, and I had assumed it was being pre-empted by my SB Live in any case.
    I was convinced this problem was (if it is indeed gone) a video card issue but I can't say it ever was without putting the 6600 back in and running for several hours. I'm going to bet it was the AC97 though because nVidia boards have always been fantastic for me, I haven't had any actual motherboard issues, my RAM and CPU are just fine, and Win2k has never let me down. 
    Don't assume anything, though, I've learned. 
    One thing to note: when I was checking out the AC97, I noticed it was *sharing* IRQ 20 with the nForce NIC detector (might have a different name, I can't remember right now). Apparently this is a capability of Win2k to share IRQs but it kind of added to my suspicions anyway.
    I'll let you know how the next few sessions go and whether this issue is still an issue!   

  • Help. Still only running 2 computers but says licenses used up.

    In process of upgrading 2 old computers. Installed 2nd license on a MacBookAir. After one month traded MacBookAir in for a MacBook Pro. Apple copied over the contents of the Air hard drive to the new computer and said I would have to enter the serial number for CS6 again. Computer suggests I run Adobe App Mgr (upgraded to 6.2) and asked for serial number. Now it tells me that the maximum amount of copies are in use and it wasn't deactivated. How can I re-install on new computer?
    Will also want to deactivate CS6 on another old computer when a new iMac arrives...

    You need to contact Adobe Support either by chat or via phone when you have serial number and activation issues.
    Here are some links to help make contact:
    http://www.adobe.com/support/chat/ivrchat.html
    http://www.adobe.com/support/download-install/supportinfo/

  • HT201272 i just found lost music.but it downloaded them only half way. so on my iphone and computer i only have half songs. how do i fix that?

    6 months back i lost about 150 songs before it loaded to my computer, after looking and looking i relized that i had 2 itunes accounts. they cannot be merged into 1 account. then the other day i got a new phone and found all my old music on my old computer, when i plugged in my phone i got all my old music back. but some of the songs only downloaded half way so about a minute and a half into the song it went to the next. then i noticed it was the same way on my computer. help what do i do to fix this big mess....

    Were they purchased from the iTunes store? If so try re-downloading them to your phone through the iTunes app.

  • I use my account in iTunes, and also in my iPad and iPhone. I've already made some purchases using a Visa Credit Card that was attached to my account. Today, for my surprise, not only this particular one, but some other cards that i have are being refused

    I get message sayng that the card is not accepted at the particular store

    The same thing happened to me this week end.
    I tried what i was told to try : enter (again) credit card data, for if it is wrong (but, it WAS right, as I could buy apps and music with this card before)
    I cheked my bank acount, my credit card works in stores and with amazon...
    So their answer is "use gift cards", which is unacceptable.
    Was your problem solved after you posted this message (quite old)?

  • Why does video only run a few seconds

    iPad demos and YouTube only run for a few seconds

    It could be that you have a poor connection to the router and the video needs to buffer. Try waiting a little to see if that helps. Good luck.

  • My 1800ghz XP athlon only runs at 1533ghz, what a waste!!!

    how come that my CPU is only running at 1533ghz but the actual rating is 1800ghz? i did get to run at 1600 by setting the fsb to 140 leave cpu multiplier in H/W which i think is always default to 11.5, however i dont want to leave it that way with FSB at 140 coz i dont want to overclock the FSB for so long that can decrease my system lifespan. how can i increase the clock speed without overclocking the fsb?
    the cpu multiplier doesnt seem to change a thing in clock speed I tried setting it to 13x133 but still at 1533ghz
    thanks for replies   :D
    SYSTEM:
    K7N2 DELTA ILSR
    ATHLON 1800+XP TB 266FSB
    128 DDR 333

    Quote
    Originally posted by [T-A]_Super_10
    its a 133 (266) FSB CPU and he turned it up to 166 (333) and set the multi as close to stock as he could so he could get a higher FSB with out all the down falls of overclocking.  Money says that his 19XX CPU will out run your 2004 CPU  :D
    Oh I didn't look hard enough. I didn't see the 166.Sorry about jumpin on the wagon too soon.I feel like I could swing my feet off the edge of a dime! LOL :D
    I am going to try that on this 2200+.  

  • My iMac desktop and McBook Air laptop run on Mavericks, but desktop has VMWare Fusion and runs Windows 7 too.  Can I transfer this capability to my McBook Air?

    My iMac desktop and McBook Air laptop run on Mavericks.  The laptop also runs Windows 7 via VM Ware Fusion.  Can I transfer this capability to my McBook Air, so I can run the same plus the Windows programs on my laptop?

    Thanks Kappy, but I should add that my desktop runs VMWare Fusion and Windows 7.  My laptop and desktop basic operating systems are Mavericks.  When I travel, I take my laptop with me.  My desktop runs a Windows investment program I like, and I'd like to be able to use this program in my laptop when I'm on the road.  VM Ware said I could do this, but would have to make and then transfer a "file" of the programs in question. How would this be done, since it would involve 3 files:  Fusion, Windows 7 and the investment program?  Maybe Apple should do this at the genius bar?  Appreciate any comments...Thanks again, Patrick

  • Itunes will not put all songs in an album i select and it says i only have 2200 songs but i have over 8000

    ITunes will not put songs I have onto my phone and ipod and in each album there is only 2-5 songs but there should be much more any help?

    right click on name of song and select create aac version and then sync again.
    Peace, Clyde

  • The wi-fi is working but I get I grayish screen when I use safari.  The touch screen is also not working but only on safari (well internet).  How do I fix that?

    Good day,
    I get a grayish screen when I access internet via my Ipad.  The touch screen is also not working but only with internet.  How do I fix that?
    thank you
    mélanie

    I have the same problem! Can anyone help us? Thanks!!

  • 3dmark2005 v1.2.0, no go in my Neo4 Plat

    Well, it is giving me a lot of problem for the last few weeks. Sometime 3dmark2005 runs all the way to the end, most of the time it crashes after 5th test, that is at the end of 2nd cpu test with BSOD; getting some message like IRQ blah blah and it is caused by nv4_disp.dll, which is definitely part of my 6600GT. Just wondering if any one else has any issue with Neo4 Plat, Evga 6600GT and 3dmark2005?

    Quote from: adrock on 27-November-05, 23:33:28
    3dmark05 is very intense benchmark to run it used to crash on my old 9800pro comp. you could also give 3dmark03 a try that one should run ok.
    your overclock seems really screwy your cpu is overclocked and your mem is only ddr333 that doesnt make any sense too me anyway
    the problem could also be memory timings/ voltages what are they?
    could try 2.5-3-3-8 1T or 3-3-3-8 2T
    It was not actually what you thing. DDR333 is what it should be if teh CPU is set at its stock FSB. The actual memclock is PC3500 or a little higher than DDR400. My meme clock is what you mentioned, 2.5-3-3-8, 1T. Will try 3dmark2003 anyway. However, I used to run 3dmark2005 in my laptop without a crash, so I think it is actually causing by something!

  • Newbie with MSI neo4 Plat

    hey there,
    my 1st post here.
    MOBO: MSI Neo4 Plat
    Graphic: MSI 7600GS
    CPU : AMD X2 3800+
    power supply: 500W
    recently i got this problem. Randomly my display goes blank, like the PC is on standby. The pc seems to be running but the monitor seems to be set to standby.
    after i restart the PC(only able to do by the reset button, cannot Ctrl+Alt+del) everything seems to be ok.
    the problem seems to occur randomly.
    anyone have any idea what's going on here?
    thanx for reading.
    cheers!

    Quote from: okta on 02-June-06, 00:35:16
    hey there,
    my 1st post here.
    MOBO: MSI Neo4 Plat
    Graphic: MSI 7600GS
    CPU : AMD X2 3800+
    power supply: 500W
    recently i got this problem. Randomly my display goes blank, like the PC is on standby. The pc seems to be running but the monitor seems to be set to standby.
    after i restart the PC(only able to do by the reset button, cannot Ctrl+Alt+del) everything seems to be ok.
    the problem seems to occur randomly.
    What kind of monitor, how is it connected and does it use calibration software.  I've seen this with Samsung (and some OEM brands made by Samsung) monitors, which use Magictune, connected to the DVI port.  Basically Magictune is crap ands clobbers the monitor's EDID info so that it switches to the VGA port - you can check this by plugging in the VGA cable.  Depending on the monitor, it can cause permanent damage to the monitor's firmware which requires a firmware re-burn... or as apparently in your case, temporary damage which is fixed with a reboot.  The only solution is to get a newer version of Magictune.. or dump it completely.

Maybe you are looking for