4 GB iPod Nano connected to A/C source but not charging

I have resetted my iPod to factory settings and used all other common troubleshooting tips but...
My 4GB iPod Nano is connected to an A/C source but does not charge. Oddly enough, the iPod says its charging, but when I disconnect the source, the battery has not charged at all. When I use other people's A/C adapter and cable, the iPod charges.
I have used the same USB cable to connect to my computer, and it does the same thing. I can transfer data to and from my iPod using this cable.
Is it possible for a USB cable to transfer data but not power?
Im really confused, because the cable clearly works but no power is being transferred, either by my computer's powered USB ports or by my A/C adapter being plugged into the wall.
Dell Precision 380   Windows XP Pro  

More time as in longer charging times, or allow the A/C adapter and cable to chill out for awhile?

Similar Messages

  • If my  ipod nano already has music on it but not my account will all my stuff be lost when i sync it to my account

    if my ipod nano already has music on it but not on my new account will all my stuff be lost when i sync it to my new accont and would i still be able to add stuff from the old account to my ipod

    All your iTunes Store purchases are linked to the account.  I do not think you can use two accounts with an iPod*, so you will have to choose one account or the other, and use only the things purchased under that account.
    *I've never actually tried, but that's my understanding.  You'd get a better answer by posting in the correct forum.  Try the iPod forums rather than the Using Apple Support Communities forum.

  • IPod nano works with USB 1.1 but not USB 2.0

    Anyone using an iPod nano that works with USB 1.1 but not with USB 2.0? I am using Windows XP and when installing the iPod software from CD it recognizes the iPod and am able to transfer songs using iTunes but when installing SP1 or SP2 to enable USB 2.0 transfers, Windows XP only recognizes the iPod nano as a USB Mass Storage Device. This is the same with iPod Updater.

    I have a similar problem with the following configuration:
    - Dell Dimension 4100 Desktop with 2 integrated USB 1.1 ports, Windows 2000 SP 4
    - PCI 6-Ports USB 2.0 Card ("Mentor" resp. www.bona.com.tw), Model USB20-PCI/6P
    What works well?
    - All my USB add-ons (1.1 and 2.0) on the internal 1.1 ports as well as on the USB2.0 PCI card
    - iPod Nano 4GB on internal 1.1 ports (external drive in windows 2000 as well as iPod in iTunes)
    - iPod Nano works as well as on the USB 2.0 card ONLY WHEN my old 4-port USB1.1 hub is connected between Nano and USB card
    What doesn't works?
    My iPod Nano directly connected to the USB 2.0 card. Symptoms when connecting:
    - Windows is very slow, process "scvhost.exe" or "system.exe" using 99% of CPU for some minutes
    - iPod is recognised as external drive, but when I click on it, it is empty and copying files to it results in "I/O error"
    - iTunes doesn't recognise the iPod (of course, if even windows itself cannot read from it...)
    I removed all USB drivers, reinstalled iTunes, iPod (by the way, I still don't understand what "iPod update" is good for, except for updating the iPod's firmware), deactivate the internal USB1.1 ports, no result.
    Help!!!!!!!!!!!!!!!!

  • 2. gen iPod nano sometimes shows up in Finder, but not in iTunes

    Hi!
    My brand new 8GB iPod nano that I got for christmas sometimes seems to have problems connecting to iTunes. Every now and then (perhaps 1/4 of the time?) it will show up in Finder, but not in iTunes (I haven't enabled "disk mode" yet, so when it shows up in iTunes, it is not visible in Finder). Also, on one or two occasions, it showed up in iTunes, but wasn't recognized.
    Whenever this happens, I just eject the iPod from Finder and disconnect it, and on the second try (on one occasion - third try) it will show up in Finder.
    What could this be? Bad connectors/cable - or iTunes just not very reliable?
    MBP 15" C2D 15" 2.33/2/160 - MB (white) 2/2/120 - PBG4 12" 1.33/1.25/60   Mac OS X (10.4.8)  

    These problems return every now and then.
    In addition, if the iPod is connected, is shown in iTunes and has already synced properly, it will sometimes reset if I try an additional manual sync from the File menu. It's a rather benign error, since it will connect and sync as soon as the iPod has restarted.
    I also had one freeze of the iPod while playing.
    This is my first iPod, and I'm used to computers that run for months or years without a reboot. Is it just normal for an iPod to freeze/reset every now and then? My Nokia phone does it too, but then I expect more from Apple...

  • IPOD Nano appears in Windows XP Pro, but not in iTunes even 7.1.1

    Dear Experts
    I have 1 GB iPOD nano. In my computer it is identifying in My Computer. But, not in iTunes.
    But, if I put the iPod in Disk Mode, then it is being identified both in My Computer as well as in iTunes also. Then, If I sinc OR manually drag music from PC to iPod in iTunes, it is happening. But after ejecting the iPod from iTunes. The iPod go on blinking mode only.
    (Off and On). How to take it out from Blinking mode to normal I am not able to know.
    Then in that stage If I reconnect it to PC, it is appearing in Disk mode in iTunes. Then to get it normal mode I need to restore it in iTunes. Then only it is comming to normal ipod activity after rmoving it from PC. But after restore there is no music na.
    Software also updated from 1.1 to 1.3 through iTunes in Disk mode. I have downloaded lates iTunes 7.1.1 also from net.
    Please guide me to solve my proble. I found so many people like me who purchased iPod of Apple suffering like this. Why Apple put this much tipical process for their product ?
    Thanks in advance.
    PS Prasad
    P-IV   Windows XP Pro   512 MB RAM

    I installed iTunes on a computer that has never had it on it before and it still will not pick up my ipod, yet windows shows it as well as the updater...I have ruled out iTunes and the cord, I believe something is wrong with the iPod itself....any suggestions? I have restored it and formated it, not sure what else I can do

  • IPod nano 5th Gen appears in Finder but not iTunes

    I am trying to restore my 5th Generation iPod Nano, but it will not show up in iTunes 12.0.1.26. It does however appear in Finder as a disk image allowing me to access certain directories, like Calendars, Contacts, DCIM, Notes, and Recordings. I've tried resetting the iPod, putting it in Disk Mode, etc. I've gone through all the support. I've tried using iExplorer. Does anyone know anything else I can try?

    Hi jthias,
    Welcome to the Apple Support Communities!
    I understand that your iPod nano is not appearing in iTunes and you have already completed some great troubleshooting. In this situation, I would suggest continuing troubleshooting by completing the steps in the attached iPod nano Troubleshooting Assistant.
    Apple - Support - iPod - iPod nano Troubleshooting
    Best regards,
    Joe

  • IPod Touch connected to home wi-fi but not working?

    I have an 16GB iPod Touch.
    When I first bought my iPod, I had nothing wrong with connecting and using the wifi @ home with it.
    But after I restored it yesterday, something went wrong.
    My iPod is connected to the wi-fi at home, but when I use it, it doesn't work. For example:
    Safari - When I use it, it fades into a partially black screen and it says 'connecting...' for a very long time. I got fed up so I don't know what happens in the end.
    TweetDeck app - It says I have slow/no connection. But when I use the laptop, it works perfectly fine.
    Is it some network setting in the iPod? I connected the iPod with wifi in another place (not at home), and it works fine. But when I come back home and connect it to mine, it still doesn't work.
    I also tried using my cousin's iPhone to connect to my wifi @ home. And his works fine. But mine doesn't! I noticed that both our IP addresses are different, but we are using the same wifi network. Is that normal?
    I'm not very familiar with all the network terms. I hope someone can help me
    Thank you!

    luvlabs
    Thank you for your reply. I have tried your suggestion. Emmm I have an AirLive router, there are so many wires o.O I don't know which one to plug out. I think it is the yellow one which says WAN? But I wasn't so sure. So I tried plugging out each wire and followed your instructions. Sorry, but it didn't work I'm going mad xD! I even tried re-doing your instructions on WAN wire, and it didn't work.
    Hmm according to step 4 (Log back into your network using Settings > WiFi > Other. Re-enter your network name (SSID), security, and network password.)
    My network name is already available in the list. So I didn't need to do that. Or is it neccesary?
    Thanks a bunch! Reply soon
    Message was edited by: carmenc23

  • My iPod Nano 2G shows up in windows but not iTunes I tried the 5Rs

    My iPod Nano( I have 2 neither work) 2G shows up in windows but not iTunes, and does not sync I tried the 5Rs and turning off antivirus/firewall. I have the newest itunes, and have used all the apple troubleshooting docs, to no avail. Help

    Check out this link:
    iPod Appears in Windows but not in iTunes
    I hope this helps!

  • I have updated iTunes on my computer and my iPod nano 4 is up to date but not all music shows up in my iTunes library..only the purchased songs..what happened and how do I get them back into the library?

    The music library in the updated version of iTunes is grossly incomplete although the music still remains on my iPod. Why did this happen and how do I get the music back into the library?

    Hi Dalegu219,
    Thanks for visiting Apple Support Communities.
    If your iTunes library is on an external hard drive, but iTunes is not recognizing the library, first make sure the right library is selected.
    You can use these steps to make sure iTunes is opening the library on your external drive:
    If iTunes is running, quit iTunes.
    If you're using Windows, hold down the Shift key and from the Start menu, choose All Programs > iTunes > iTunes.
    If you're using a Mac, open iTunes and immediately hold down the Option key.
    You should see one of these screens:
    Pick Choose Library and locate the library on your external hard drive.
    From:
    iTunes: How to open an alternate iTunes Library file or create a new one - Apple Support
    If the right library is selected, but you do not see your songs, try re-creating the library using the instructions found here:
    iTunes: How to re-create your iTunes library and playlists - Apple Support
    Best Regards,
    Jeremy

  • IPod Nano 4th Gen shows in Finder, but not under Devices in iTunes with Mac OS

    Please Help. I see the disk on my desktop, it's on Finder, but it doesn't appear in iTunes

    iPod not recognized in iTunes and Mac desktop

  • HT4235 iPod nano 6th generation, syncing with audiobooks does not work now, had been working.  Sync test says:  No iPod touch, iPhone, or iPad found.  Connectivity test OK, no physical problems, iTunes shows the iPod.  Any clues what to do?

    iPod nano 6th generation, syncing with audiobooks does not work now, had been working.  Sync test says:  No iPod touch, iPhone, or iPad found.  Connectivity test OK, no physical problems, iTunes shows the iPod.  Any clues what to do?

    Hmm.. Thank you for the response.
    Have you tried using the iPod with another user account or computer, to help narrow down whether the problem lies with the computer, account, or the iPod itself?
    Maybe try reformatting it, using the tools provided by Windows. Instructions on how to reformat your iPod can be found in this article.
    http://www.methodshop.com/gadgets/ipodsupport/erase/index.shtml
    B-rock

  • Does the new IPOD Nano connect with the bose docking stations?

    Does the new IPOD NANO connect with the Bose docking stations?

    hi
    Yes it does. just bought a Bose. But make sure you have no cover on your Nano as it will not connect!

  • Hello i would to play my ipod nano radio via my Bluetooth speakers but it only plays via the head phones is there anyway around this . thanks

    Hello I was hoping to listen to my ipod nano radio stations via Bluetooth speakers but I can't get this to work it only plays via head phones Thank s for any help

    The same problem I have today afternoon.
    My car audio system is compatible with iPod USB connector and worked fine for also 6 months.
    When connecting my iPod nano 6rd gen via USB to car audio system, iPod displays on its screen a sucessfull connection, and music tracks is successfully displayed on the car audio system. But do not play. Switch forward or backward by playlist (by the buttons on the car audio system) works also, but still there is no start playback.
    I tried plugged my iPhone 5 via USB to car audio system - it's works fine.
    I plugged iPod to my mac computer - itunes says it's all Ok.
    I am confused and do not understand what is happening.
    May be restoring to default factory settings iPod....

  • My ipod touch just shows the charge symbol on the screen and i checked whether there is a problem in the charger but it works perfectly on my iphone 4 and when my ipod is connected to the computer itunes is not recognising my device pls help me

    my ipod touch just shows the charge symbol on the screen and i checked whether there is a problem in the charger but it works perfectly on my iphone 4 and when my ipod is connected to the computer itunes is not recognising my device pls help me

    tmplHi pranoop,
    If you are having an issue with your iPod touch not being recognized by iTunes when connected to your Windows computer, I would suggest that you troubleshoot using the steps in this article - 
    iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
    Thanks for using Apple Support Communities.
    Sincerely,
    Brett L 

  • My iPod nano, 5th generation is frozen and will not respond. There is a charge, was just used 2 hrs ago, and has a song showing on the face but will not turn off or respond

    MMy iPod nano 5th generation is frozen and will not respond.  There is a picture of a an artist on it, it has a charge, was used fine 2 hrs ago, won't turn off ?..

    Good Afternoon CPilkington1,
    If your iPod nano is unresponsive, follow the troubleshooting steps below:
    Apple - Support - iPod - iPod nano (5th generation) Troubleshooting
    http://www.apple.com/support/ipod/five_rs/nano5gen/
    If the issue is not resolved after following the steps outlined in the Troubleshooting Assistant, please reply to this post with additional information or any error messages that may appear.
    Regards,
    - Judy

Maybe you are looking for

  • How do I convert an html design web site to CSS template and layout?

    Good Morning, All! How can I convert, apply, or change, efficiently, my html web pages into a CSS template so I don't have to change each page every time I add something to the main page-also, I currently have two tables (I know, old-fashioned) one w

  • Sales order creation in project based industry

    Dear Gurus My client is into erection of cement plants and alcohol plants. once client got the order form the customer for the plant setup production will start. delivery and billing will be created when ever one material is ready after the productio

  • I want links (ie in an email) to open Firefox, not Safari

    When I click a link in an email, it opens in Safari. How do I open it in Firefox by default instead?

  • WLCS 3.2 Portals switching while remaining in session

    Hi, I am upgrading our commerce server from 2.1 to 3.2. I have two portals that I switch around with buttons on the two different header jsp files while the same user still stays in the same session. In my old commerce server version, the header butt

  • Error in Planning refresh

    Hi, I updated my planning dimension so I was trying to refresh database. But I throw an error at step 9 of 33. Error-> Step 9 of 33: [Financia] Adding members to dimension Version. com.hyperion.planning.olap.EssbaseException: 1st Pass (1060051) then