4 HD displays in 2010 3.33 MacPro using a 5770 and a 5870?

Can I run four Apple 23" Cinema HD Displays in a 2010 Mac Pro, Six Core, 3.33GHz, running Lion, with:
- an Apple ATI Radeon HD 5770, 1GB, AND
- an Apple ATI Radeon HD 5870, 1GB?
Will it work, and will I need any active adapters?
How about power supply issues?
Pram zapping or firmware issues?
Thanks in advance for your advice,
John in Palm harbor

The 5870 requires TWO Aux power cables and will run up to three of those displays with ACTIVE adapters to Single-Link DVI.
The 5770 requires ONE Aux power cable and will run up to three of those displays with ACTIVE adapters to Single-Link DVI.
The Mac pro silver tower models have TWO Aux power outlets, so to run the exact cards you specified, you would need an add-on power supply, such as one designed for the second DVD Reader slot. I recommend you forget about the 5870, get an other 5770 and live happily ever after.

Similar Messages

Can Adobe Premiere run on 2013 Mac Book Pro (thunderbolt port) and display on 2010 iMac (Mini DisplayPort) using TDM. TB cable Opt. F2 didn't work. Will a Mini Display cable work?

I need to work on Adobe Premiere on my 2013 Mac Book Pro (with thunderbolt port) and display it on my 2010 iMac (with Mini DisplayPort) using Target Display Mode (TDM). I tried using a thunderbolt cable plus Option F2, but it didn't work. Will a Mini Display cable work? Any other suggestions?
iMac specs - 21.5 inch 2010 iMac 3.06 GHz Intel Core i3 4 GB 1333 MHz DDR3
Mac Book Pro specs - 13 in. retina 2.6 GHz Intel Core i5 16GB 1600 Mhz DDR3

2010 iMacs do not have Thunderbolt, they have mini-display ports. You are using the wrong connection, you need a mini display port to mini display port. Please read up on what Apple says in Target Display Mode: Frequently Asked Questions (FAQ)

Will my 27inch LED cinema display work with the 2014 MacPro?

I have two 27 inch LED cinema displays I bought in 2010 I think. I want to know if I can use both displays with the new cylindrical MacPro? My displays have mini display port connection and are non thunderbolt. I know that I cant daisy chain the monitors because they are NOT thunderbolt, but will I be able to connect both to the new MacPro's coming this December?

Thanks TurboStar for your excellent comments and suggestions. I have pre-ordered that Apple 27" LED Display now off Amazon.co.uk... it will be in stock on the 21st March.... and I look forward now with anticipation to getting my hands on it and more importantly my eyes... now that I have read your resounding approval of the 27" compared to my tired and jaded 30".
Interesting your comments about the new MacPro also... I think I went OTT when I bought my last 12 Core MacPro (32GB RAM + 512GB SSD)..... it cost me in total €8,800 ($12,200) which was mad money.... it's doing a great job.... but I don't work with video or video games, just Quark, Illustrator and Photoshop... so not sure if the 8 Core or less would have done the job just as good... I just wanted the best with what I thought was the most horsepower so I could take on any task. I will wait and review more with the New MacPro.... maybe the 6 Core is the way to go... and pump up the SSD and RAM....
Thanks again.
Regards,
Anthony
PS. Have a grrreat Paddys Weekend!!

I have an 27 inch apple iMac 2010. Can I upgrade by buying a Mac book pro and use plug in and use the iMac as a screen only?

I have an 27 inch apple iMac 2010. Can I upgrade by buying a Mac book pro and use plug in and use the iMac as a screen only?

Yes your 2010 supports Target Display Mode using MiniDisplay Port input.
check out FAQ #4 > Target Display Mode: Frequently Asked Questions (FAQ)

How do I put an external display to sleep when I am using my MacBook Air for presentation?

How do I put an external display to sleep when I am using my MacBook Air for presentation? I do not want to go to the projector just to turn it off and turn on again after a while? Is there a keyboard shortcut for that?

I want to be able to sleep the external display and at the same time do things in the MacBook.( This feature is useful for me so that I can prepare some things and so that my audience will not see what I am about to show them.)
Is there a feature for Mountain Lion?

Problem with displaying BLOB images on JSP page using a servlet

hi. I have a big problem with displaying BLOB images using JSP. I have a servlet that connects to the oracle database, gets a BLOB image , reads it, and then displays it using a BinaryStream. The problem is , this works only when i directly call that servlet, that is http://localhost:8080/ImageServlet. It doesn't work when i try to use that servlet to display my image on my JSP page (my JSP page displays only a broken-image icon ) I tried several coding approaches with my servlet (used both Blob and BLOB objects), and they work just fine as long as i display images explicitly using only the servlet.
Here's what i use : ORACLE 10g XE , Eclipse 3.1.2, Tomcat 5.5.16 , JDK 1.5
here is one of my image servlet's working versions (the essential part of it) :
               BLOB blob=null;
          rset=st.executeQuery("SELECT * FROM IMAGES WHERE ID=1");
          while (rset.next())
               blob=((OracleResultSet)rset).getBLOB(2);
          response.reset();
          response.setContentType("image/jpeg");
          response.addHeader("Content-Disposition","filename=42.jpeg");
                ServletOutputStream ostr=response.getOutputStream();
               InputStream istr=blob.getBinaryStream(1L);
                int size=blob.getBufferSize();
          int len=-1;
                byte[] buff = new byte[size];
                     while ((len=istr.read( buff ))!=-1 ) {
               ostr.write(buff,0,len);
         response.flushBuffer();
         ostr.close(); and my JSP page code :
<img src="/ImageServlet" border="0" > If you could just tell me what i'm doing wrong here , or if you could show me your own solutions to that problem , i would be very greatful ,cos i'm realy stuck here , and i'm rather pressed for time too. Hope someone can help.

I turns out that it wasn't that big of a problem after all. All i had to do was to take the above code and place it into another JSP page instead of into a servlet like i did before. Then i just used that page as a source for my IMG tag in my first JSP. It works perfectly well. Why this doesn't work for servlets i still don't know, but it's not a problem form me anymore . Ofcourse if someone knows the answer , go ahead and write. I would still appriceatte it.
here's the magic tag : <img src="ImageJSP.jsp" border="0" > enjoy : )

HT201343 Can I upgrade my mid 2010 macbook pro to use airplay?

Can I upgrade my mid 2010 macbook pro to use airplay?

Unfortunately, no you can't.
Just to be clear. Your computer will support AirPlay it's just AirPlay Mirroring that requires newer hardware.
Matt

Can't display image on TV from MacBookPro (using DVI to video adaptor)

I purchased the apple "DVI to Video Adapter" to be able to use my TV as a display, but it isn't working despite help from the Apple help desk.
I'm using a standard TV video cable that plugs into the yellow video input jack, with is a Hitachi full multi-system C2578FS that works anywhere in the world. Before my iBook died last year, I used to watch movies from it on the same television using a similar setup (just VGA instead of DVI adaptor).
The television is not receiving the signal in any way. My MacBookPro is: the 'detect displays' when activated in my MacBook Pro's menu bar shows a display it calls "NTSC/PAL" which is the television, and I've tried each of the different settings to no avail.
Any ideas on how I might finally watch a movie or slideshow on my television?
Kind regards in advance,
-ck-

After much fiddling with display resolutions and TV setting, and several calls to Apple help, problem was found to have a really basic solution: replace the RCA connector cable. The old one was shot.

I have 12 core with Quatro 4000 and 5770, I want to use dual monitor setup, monitors are NEC with Spectraview-II. How do I connect? 4000 only has 1 Display Port and 1 DVI. 5770 has 2 of each, if I use both 5770 Display Ports, does the 4000 contribute?

I just bought a 12 core with Quatro 4000 and 5770, I want to use dual monitor setup, monitors are NEC with Spectraview-II. How do I connect? 4000 only has 1 Display Port and 1 DVI. 5770 has 2 of each, if I use both 5770 Display Ports, does the 4000 contribute any work at all? I read where on a PC they would work together, but on a MAC they do not.
I read that Display Port has higher band width than DVI, NEC monitors for best performance they recommend using DIsplay Port.
When I was setting this up I looked at a Nvidia Quadro 4000, unfortunately it was for PC, it had 2 Display Ports, in the Mac version they reduce it to one. I did not think there could be a difference.
Mainly want to use it for CS6 and LR4.
How to proceed???
I do not want to use the Quadro 4000 for both, that would not optimize both monitors, one DP and 1 DVI. Using just the 5770 would work but I do not think the 4000 would be doing anything, and the 5770 has been replaced by the 5870.more bandwidth.
Any ideas, I am a Mac newbie, have not ever tried a Mac Pro, just bought off ebay and now I have these problems.
As a last resort I could sell both and get a 5870. That would work, I'm sure of that, it's just that I wanted the better graphics card.
Thanks,
Bill

The Hatter,
I am a novice at Mac so I read all I can. From what I understand the NEC monitors I bought require Display Port for their maximum performance. The GTX 680 only has DVI outputs. Difference from what I understand is larger bandwidth with the DP.
You said I have the 4000 for CUDA. I am not all that familiar with CUDA and when I do read about it I do not understand it.
A concern I have is, that if I connect the 2 high end NEC monitors via the 5770, using it's 2 Display Ports I would have nothing connected to the 4000. Is the 4000 doing anything with nothing connected? I read where in a PC system the 2 cards would interact but in a Mac system they do not.
Bottom line, as I see it, the 4000 will not be useful at all to me, since I want a dual monitor set-up.
So far the 5870 seems the best choice, higher band width than the 5770, and it has 2 Display Ports to optimize the NEC monitors.
I'm not sure how fine I am splitting hairs, nor do I know how important those hairs are. I am just trying to set up a really fast reliable system that will mainly be used for CS6 and LR4. Those NEC monitors are supposed to be top notch.

How can I display JTextFields correctly on a JPanel using GridBagLayout?

I had some inputfields on a JPanel using the boxLayout. All was ok. Then I decided to change the panellayout to GridBagLayout. The JLabel fields are displayed correctly but the JTextField aren't. They are at the JPanel but have a size of 0??? So we cannot see what we type in these fields... Even when I put some text in the field before putting it on the panel.
How can I display JTextFields correctly on a JPanel using GridBagLayout?
here is a shortcut of my code:
private Dimension sFieldSize10 = new Dimension(80, 20);
// Create and instantiate Selection Fields
private JLabel lSearchAbrText = new JLabel();
private JTextField searchAbrText = new JTextField();
// Set properties for SelectionFields
lSearchAbrNumber.setText("ABR Number (0-9999999):");
searchAbrNumber.setText("");
searchAbrNumber.createToolTip();
searchAbrNumber.setToolTipText("enter the AbrNumber.");
searchAbrNumber.setPreferredSize(sFieldSize10);
searchAbrNumber.setMaximumSize(sFieldSize10);
public void createViewSubsetPanel() {
pSubset = new JPanel();
// Set layout
pSubset.setLayout(new GridBagLayout());
GridBagConstraints gbc = new GridBagConstraints();
// Add Fields
gbc.gridy = 0;
gbc.gridx = GridBagConstraints.RELATIVE;
pSubset.add(lSearchAbrNumber, gbc);
// also tried inserting this statement
// searchAbrNumber.setText("0000000");
// without success
pSubset.add(searchAbrNumber,gbc);
pSubset.add(lSearchAbrText, gbc);
pSubset.add(searchAbrText, gbc);
gbc.gridy = 1;
pSubset.add(lSearchClassCode, gbc);
pSubset.add(searchClassCode, gbc);
pSubset.add(butSearch, gbc);
}

import java.awt.*;
import java.awt.event.*;
import javax .swing.*;
public class GridBagDemo {
public static void main(String[] args) {
    JLabel
      labelOne   = new JLabel("Label One"),
      labelTwo   = new JLabel("Label Two"),
      labelThree = new JLabel("Label Three"),
      labelFour = new JLabel("Label Four");
    JLabel[] labels = {
      labelOne, labelTwo, labelThree, labelFour
    JTextField
      tfOne   = new JTextField(),
      tfTwo   = new JTextField(),
      tfThree = new JTextField(),
      tfFour = new JTextField();
    JTextField[] fields = {
      tfOne, tfTwo, tfThree, tfFour
    Dimension
      labelSize = new Dimension(125,20),
      fieldSize = new Dimension(150,20);
    for(int i = 0; i < labels.length; i++) {
      labels.setPreferredSize(labelSize);
labels[i].setHorizontalAlignment(JLabel.RIGHT);
fields[i].setPreferredSize(fieldSize);
GridBagLayout gridbag = new GridBagLayout();
JPanel panel = new JPanel(gridbag);
GridBagConstraints gbc = new GridBagConstraints();
gbc.weightx = 1.0;
gbc.weighty = 1.0;
gbc.insets = new Insets(5,5,5,5);
panel.add(labelOne, gbc);
panel.add(tfOne, gbc);
gbc.gridwidth = gbc.RELATIVE;
panel.add(labelTwo, gbc);
gbc.gridwidth = gbc.REMAINDER;
panel.add(tfTwo, gbc);
gbc.gridwidth = 1;
panel.add(labelThree, gbc);
panel.add(tfThree, gbc);
gbc.gridwidth = gbc.RELATIVE;
panel.add(labelFour, gbc);
gbc.gridwidth = gbc.REMAINDER;
panel.add(tfFour, gbc);
final JButton
smallerButton = new JButton("smaller"),
biggerButton = new JButton("wider");
final JFrame f = new JFrame();
ActionListener l = new ActionListener() {
final int DELTA_X = 25;
int oldWidth, newWidth;
public void actionPerformed(ActionEvent e) {
JButton button = (JButton)e.getSource();
oldWidth = f.getSize().width;
if(button == smallerButton)
newWidth = oldWidth - DELTA_X;
if(button == biggerButton)
newWidth = oldWidth + DELTA_X;
f.setSize(new Dimension(newWidth, f.getSize().height));
f.validate();
smallerButton.addActionListener(l);
biggerButton.addActionListener(l);
JPanel southPanel = new JPanel(gridbag);
gbc.gridwidth = gbc.RELATIVE;
southPanel.add(smallerButton, gbc);
gbc.gridwidth = gbc.REMAINDER;
southPanel.add(biggerButton, gbc);
f.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
f.getContentPane().add(panel);
f.getContentPane().add(southPanel, "South");
f.pack();
f.setLocation(200,200);
f.setVisible(true);

How to display the output screen when I use bdc.

hey expert,
I want to display the output screen when i use bdc without using mode 'A'.
thank you.

Hi,
You can go for mode 'E'.. it will display the output screen directly and if there is any error in the transaction you would get that particular screen and you can correct and continue after which you will get the final screen if anything goes fine...
check this sample code....
I had a program if you execute below program it automatically creates a new zprogram.
REPORT zprogram_create_recording.
PARAMETER:
p_prog    TYPE sy-repid OBLIGATORY,
p_shtxt TYPE repti OBLIGATORY,
p_pack TYPE devclass DEFAULT '$tmp'.
DATA:
t_bdcdata LIKE
   STANDARD TABLE
         OF bdcdata.
DATA:
wa_bdcdata LIKE LINE OF t_bdcdata.
REFRESH t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLWBABAP'.
wa_bdcdata-dynpro     = '0100'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'RS38M-PROGRAMM'.
wa_bdcdata-fval       = p_prog.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'NEW'.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLSEDTATTR'.
wa_bdcdata-dynpro     = '0200'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'RS38M-REPTI'.
wa_bdcdata-fval       = p_shtxt.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'TRDIR-SUBC'.
wa_bdcdata-fval       = '1'.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'CONT'.
APPEND wa_bdcdata TO t_bdcdata.
IF p_pack EQ '$TMP'.
*local object
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLSTRD'.
wa_bdcdata-dynpro     = '0100'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'KO007-L_DEVCLASS'.
wa_bdcdata-fval       = ' '.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'TEMP'.
APPEND wa_bdcdata TO t_bdcdata.
ELSE.
*package assignment with request
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLSTRD'.
wa_bdcdata-dynpro     = '0100'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'KO007-L_DEVCLASS'.
wa_bdcdata-fval       = p_pack.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'ADD'.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program    = 'SAPLSTRD'.
wa_bdcdata-dynpro     = '0300'.
wa_bdcdata-dynbegin   = 'X'.
wa_bdcdata-fnam       = 'KO008-TRKORR'.
wa_bdcdata-fval       = ' '.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'KO008-AS4TEXT'.
wa_bdcdata-fval       = ' '.
APPEND wa_bdcdata TO t_bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-fnam       = 'BDC_OKCODE'.
wa_bdcdata-fval       = 'LOCK'.
APPEND wa_bdcdata TO t_bdcdata.
ENDIF.                                 " IF P_PACK EQ '$TMP'
CALL TRANSACTION 'SE38' USING t_bdcdata MODE 'E'.
Hope this would help you..
Regards
Narin Nandivada

How to display a image in webdynpro view using a bytearry

Hi Frndz..
How to display an image in a view using webdynpro java ..i have bytearry object in context ..like
*byte[] img = wdContext.nodeYywwwdataImport_Input().nodeOutput().nodeOutMime().currentOutMimeElement().getLine();*_
by using this i need to show image in view..
Kindly help me ....
Thankas in Advance
Regards
Rajesh

Hi,
byte[] img = wdContext.nodeYywwwdata_Import_Input().nodeOutput().nodeOutMime().currentOutMimeElement().getLine();
use this code to create resource and you need to set this value to the context created to display the image suppose in the image UI and set the source property with this attribute:-
IWDResource res=WDResourceFactory.createCachedResource(b,"MyImage",WDWebResourceType.JPG_IMAGE);
IPrivateAppView.IVn_ImageTabElement imageEle=wdContext.createVn_ImageTabElement();
imageEle .setVa_Name(res.toString());
wdContext.nodeVn_ImageTab().addElement(imageEle);
Hope this may help you.
Deepak

How to display the output of report(9i) using Report Background Engine

Hi,
We are converting the forms and reports from 6i to 9i.
we could run the report in the browser from form using WEB.SHOW_DOCUMENT built-in, but we are not able to display the report output from form using the Report Background Engine.Let us know if you have any solution for this.
Regards,
Pramila.

Pramila,
you have to use Reports Server called from RUN_REPORT_OBJECT(). Please see the Reports Integration whitepaper on otn.oracle.com/products/forms. You can either look it up in the Forms 10g collateral seciton or the Forms 9i collateral section.
Frank

I used to have a +.- displayed in upper left corner to click and change text size. My sister used my computer and now I can no longer find this feature.

I used to have a +.- displayed in upper left corner to click and change text size. My sister used my computer and now I can no longer find this feature

Do you still have all toolbars visible (View > Toolbars)?
Did you use an extension or the standard zoom buttons that you can find in the toolbar palette in the View > Toolbars > Customize window ?
Press F10 or tap the Alt key to bring up the "Menu Bar" temporarily.

Issue in Display PDF OutPut with Thai characters using OracleReports9i

The Report has Cordia New font for display the Thai Charecter.I am using the Win2000 OS.
The Oracle ReportsBuilder9i shows proper Thai Character,
but when we generate to PDF file the output shows as junk in Adobe Acrobat Reader5.0
The environment variables set for this purpose are:
1.REGEDIT Change:
NLS_LANG: THAI_THAILAND.TH8TISASCII
2.UIFONT.ALI Change:
[ PDF:Subset ]
Cordia New....="CORDIA.TTF"
3.Acrobat Reader Setting:
Edit>>Preference>>General>>Display
Check all the check boxes (smooth Text, smooth Artline, smooth Images)
If anybodys knows the solution or can give a clue to sorting out this issue, it will be very helpful.
Best Regards,
Krishna Kumar.K

Thank you for your posting - The Member Feedback forum is not monitored by Oracle support or product teams and so Oracle product and technology related questions cannot be answered. However we recommend that you post this thread to the "Reports" forum.
The URL is: Reports
Thanks - The OTN team

4 HD displays in 2010 3.33 MacPro using a 5770 and a 5870?

Similar Messages

Maybe you are looking for