4 hours and Security Wipe still continuing in Q5

I set my phone on security wipe and its been 4 hours and its still not finished. I removed the media card... 
Need urgent help. Hard reboot is alos not working
Solved!
Go to Solution.

Hello noorenayat
Relax, let the wipe process finish and connect it to the wall charger. There's wipe with more than 12 hours. It depends on data size.
Also your phone number listed in your profile. It's not recommended as this is open forums and spammer may send junk messages to your phone. Edit it from My Setting at top left of this page and change to your carrier name.
Good luck.
• Click Likes to appreciate those who helps you
• If your issue solved, mark the best post in your thread as Solution

Similar Messages

  • My Aperture 2.1 has gone into a continual thumbnail mode.  I left the computer, a MacBook Pro, run all night, about 12 hours and it is still making thumbnails.  I tried reloading Aperture 2.1, but that did not change anything.  I have also turned the syst

    My Aperture 2.1 has gone into a continual thumbnail mode.  I left the computer, a MacBook Pro, run all night, about 12 hours and it is still making thumbnails.  I tried reloading Aperture 2.1, but that did not change anything.  I have also turned the system off, for a period of time, and then turning it back on, when I click on Aperture, it comes up and locks in the thumbnail mode.  I can view my stored pictures, even modify them, but it still says thumbnails.
       I got in this mode by trying to import "one jpeg photo", from a scanned slide using a Nikon Scan4 IS5000ED scanner.  I had saved the scan to my  desktop before I tried to import it.
    Please Help, Maurice A Bird at  [email protected]
    Thanks

    My daughter has had her Razr for about 9 months now.  About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

  • I have a MacBook and I am unable to successfully update Firefox. I click "Update Firefox" and it's starts updating but never completes the process. I sometimes leave it for hours and it's still updating! Please help!

    Question
    I have a MacBook and I am unable to successfully update Firefox. I click "Update Firefox" and it's starts updating but never completes the process. I sometimes leave it for hours and it's still updating! It's almost as if something is blocking it ffrom completing the process. Please help

    Next time an app update gets stuck try a reset. Press and hold both the home and power buttons for10-15 seconds till the Apple logo appears. Then release both buttons. Wait till your iPad starts on it's own. Try now. Also YouTube is still available. If you can't find it the the app store go to the bottom of the app store page and tap purchased. All your deleted apps will be listed and you can reinstall YouTube from there.

  • HT1414 I have restored my IPHONE and the problem still continues. No photo is save in camera roll since the new IOS6!

    I have restored my IPHONE and the problem still continues. No photo is save in camera roll since the new IOS6!

    The built in camera app. But all the apps do not allow me to save any photos as well.

  • I deleted my iphone with icloud because the phone was lost but it been 16 hours and the phone still without response what can i do

    Yesteday i lost my iphone and i delete it withfind my iphone this morning my iphone was return but is been 16 hours and the phone still deleting itself with only the circle on the front i tried a hard reset but dont work and the imac dont even recognize the phone. WHAT OPTIONS I HAVE?

    I have read a number of threads with the rotating circle in the middle of the screen.  Some have been able to Reset by holding down the Sleep Button and the Home Button until the Apple Logo shows up and then wait for a lock screen.  This had to be done several times in some cases.  Others suggest letting the battery totally run down and then charge for at least one half hour.  Then do a Reset again. 

  • Blackberry Protect and Security Wipe

    Hi! If you would like to turn off your BlackBerry Anti-theft on your device you can simply go to your Settings → BlackBerry AntiTheft and simply disable it from there. But if your device is running 10.3.2 OS then you will be asked to enter your BlackBerry ID credentials. Just enter your BlackBerry ID username and password and it will be disabled. Then to perform security wipe, I suggest back up your device first before doing so. Then when you have everything backed up go to Settings → Security and Privacy → Security Wipe It may take some time to wipe your device and expect that it needs more than 30% battery level to continue. So keep your battery charged and wait for the wipe to be completed. You may also see that your device will turn off and on a few times while performing security wipe. NOTE:To find what OS you're currently running, go to Settings → About → Tap Category → Select OS on the drop down list and check current OS. 10.3.2 OS update is very tight in security specially when your BlackBerry Anti-theft is turned on. When you perform a Security wipe, you will need to verify your BlackBerry ID credentials. Then you must enter your BlackBerry ID credentials again after security wipe. If you fail to enter your BlackBerry ID, then your device is forever locked out. This is the reason why I always advise to have t he Anti-theft turned off first. Good luck!

    Hello,
    If you are on 10.3.1 or earlier, there is no requirement to turn off Protect before a WIPE...the WIPE will remove the association between your BB device and all BB proprietary services, including Protect.
    However, if you are on 10.3.2, then indeed you need to first turn off Protect before you initiate the WIPE. Refer:Article ID: KB36737 BlackBerry Protect Anti-theft ProtectionGood luck!

  • Power Macintosh 7200 to Mac Mini back up and secure wipe question

    Hi all, nearly figured this on my own but hope that someone here can fill in the gaps.
    I have a clunky old 7200/75/16 (no upgrade card, bog standard machine) I want to sell/give/dump.
    Before that, I need to back up the 500 MB HDD (hard to believe that was big once, now looking at a 500 GB HDD for the new machine!) and then secure wipe it.
    I've learned that I can get halfway there with a crossover cable and Apple Talk. So far, so good.
    Now, how about the secure wipe? I've had a look but I've not had any success in finding a how-to.
    I have a feeling I can't use Disk Utility in Leopard for this, but maybe I am wrong.
    Advice is sought from anyone here that can share their expertise on the best way to go.
    A cheap/free solution (that doesn't destroy the machine) would be welcomed!
    If relevant: I don't have the installer floppies for the 7200. I unwisely bought the machine without them but vaguely recall from an earlier Macintosh that Disk First Aid had some kind of format facility though I doubt it was far from secure by today's standards. I figure I can find a set of installer disks on eBay to get the 7200 operational again once I've completed this chore...

    I've learned that I can get halfway there with a crossover cable and Apple Talk.
    File sharing via AppleTalk cannot be used with the most modern operating systems. You should be able to use TCP/IP. A third-party program may be of interest. Also, see this article for some general information.
    Now, how about the secure wipe?
    One could use Drive Setup (a 1.7.3 version is available for download) for this. Under the Functions menu you will find Initialization Options, where "Zero all data" can be chosen. However, the program has to run from another disk (such as a bootable floppy). It is possible to create and modify a startup floppy on the 7200.
    A third-party application such as Wipe Info (part of Norton Utilities, commercial) or Burn 2.5 (freeware) could be used, too.
    If relevant: I don't have the installer floppies for the 7200.
    The Disk Tools PPC (here) is one thinkable startup floppy for the Power Macintosh computer in question. If necessary, a complete System 7.5.3 (e.g., the International English version here) can be downloaded from Apple.
    Jan

  • I called my apple care for support. I purchased iTunes Match and after I brought I have been waiting 12 hours and it is still in  step 1 of 3 waiting to complete????? I have shut computer down and brought back up still will not complete steps

    I called support and I am still 12 hours later waiting for iTunes natch to complete the steps

    I called support and I am still 12 hours later waiting for iTunes natch to complete the steps

  • I've waited 30 hours and my Macbook still won't turn back on......

    I am not sure what to do as my Macbook is still not working after waiting 30 hours. I plugged my iPad mini into my computer using the USB cable and my Macbook immediately shut off and has been dead since. No sounds. No light comes on when I plug it into the outlet. Just dead. Reading other posts it looked like if I waited, it would come back on, but I'm now at 30 hours and there is nothing. I tried reseting the SMC and still nothing. I really hate going to the Apple store, so would love a way to fix this myself. Any ideas or am I destined to go to the Genius Bar? Thanks for advice!

    Remove the battery and the power cord. Press and hold the power button for 5 seconds and release. Replace the battery, and the power cord. If your machine still does not power on, schedule an appointment with the Apple Genius bar. No amount of keystroke advice will bring back a dead machine that won't power on.

  • How to absolutely and securely wipe drive.

    just transitioned to a new Mac and am in need of absolutely wiping the data off the old iMac hard drive. My plan was to first delete the files, then use disk utility and a seven wipe free space erase, then delete the user, format the drive, and reinstall the OS. I need to be compulsive about this because there is sensitive data (patient medical information) on the drive but I have to be sure is destroyed. If you don't think that this process is adequate I'd appreciate your opinion on one that is or even if I have to destroy the computer physically. If this is the case I need to know how to get into the iMac to remove the hard drive for physical destruction. Thank you for your consideration.

    I don't know the model iMac that you have but there are several YouTube videos, e.g.
    https://www.youtube.com/watch?v=f1dUkqCvJgM
    https://www.youtube.com/watch?v=ShY8zuT-wPg
    https://www.youtube.com/watch?v=0uFVbAwo1RU
    It is a doable project.
    But not a lot of people do it, hence the suggestions give above to erase your HD.
    Aside: 
    Note (1) Not properly erasing a HD before transferring the computer
    or (2) not removing a HD before transferring the computer leaves some owners with another 'alternative':
    (3) trying to destroy the computer and thus adding to the ever increasing pile of electronic waste / metals.

  • I am uploading an Excel Workbook (xlsx format) to convert to a pdf and it has taken over an hour and it is still not uploading. I have even tried to restart it and that did not work.

    I'm trying to upload an Excel Workbook (in xlsx format) to have it converted to a PDF file and that little circle has been spinning forever. I tried to restart the process but it did the same thing. So I tried to open up each individual worksheet of the workbook and save them individually. I "think" I got that to work, but when I go to the combine tab, I see the four pages that I have selected with spinning "thinking" circles on all of them. Please help. I have a client waiting for this proposal and I don't know what to do!
    LisaWoz

    Hi Lisa Wozniak,
    Are you on a slow Network Connection? I would recommend you to Clear the browser Cache and History and  then try again or try using a different browser on a different Network Connection.
    Let me know if it works or not.
    Regards,
    Rahul Tyagi

  • My iphone 3gs is factory reset now for three hours and the charger still!

    I do not know what to do for it to work. Have tästat try to stop but you can not have tried to take out the sim card but it does not work either! For help with this now!

    Sounds like a trip to the Genius Bar is in your future.

  • Blackberry Z10,post security wipe...BBM Not working..Showcasing error Unable to complete Set Up and Temporary Server Error"

    I would request you to please help fixing the BBM error - Unable to complete Set Up and Temporary Server Error”.
    I am using a BB Z10 with Software version 10.1.0.4181 and OS version 10.1.0.4633
    Already tried resetting device to Factory Settings and Security Wipe...
    Please help.

    Hey KaranPrabhakar,
    Welcome to the BlackBerry Support Community Forums.
    Thanks for the question.
    Follow the steps in this KB article to resolve the issue: www.blackberry.com/btsc/KB33780
    Let me know if you have any more questions.
    Cheers.
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

  • BB10 security wipe on a Q10 is taking a VERY long time.

    I am running a security wipe on a Q10.. It's been going for over an hour. I've read it can take around 15 minutes but this is ridiculous.. I don't think it's working. The phone was only a few days old and has had very little use. I was about to pull the battery when I read that that will cause the software to be reloaded.  The screen just has a swirly timer going around and what looks more like a printer icon. Any ideas what to do? I don't have much confidence it's going to finish, it feels like a bug.

    Hey, This is why I started another topic. My situation is slightly different and I'm looking for an answer to a different question: Hello, I’ve searched high and low for the answer to this problem. I can find others with a similar problem, but no solution. Maybe someone here can help? I preformed a security wipe last night at approximately 10pm. I did this because I realised I’d used 7.8GB of my 8GB limit and it was affecting the phone’s performance – specifically, I couldn’t get the hub to load. I use my phone for social media, emails and messaging only, and with my contacts saved elsewhere I’m not concerned about having to set the phone up again. Because of that, I selected to wipe everything besides the security option, which was greyed out and couldn’t be selected. The wipe was successfully processed, my phone automatically shut down and restarted, and the sim/USB looking load image appeared with a small, revolving circle beneath it. Having performed a security wipe before I know it can take a few hours, so I went to bed. It’s now 1:30pm the next day and the security wipe still hasn’t completed. I’ve read various accounts of the wipe taking between 2-4 hours, but nothing about it taking this long. I’m concerned that, although the circle is still revolving, the wipe has crashed somehow and I have no way of booting or cancelling the wipe. I’ve restarted the phone once to no effect – the same load screen appears following the Blackberry icon. I do wonder whether this effectively restarted the wipe causing a further delay, as I did it at approximately 7am and my phone is hot to touch, suggesting it's doing something at least. A lot of people suggest taking the battery out to force a reboot, but unfortunately as this is a Q10 (and unless I’m missing something) that’s not an option: the battery’s not accessible. Does anyone know what I can do? Is there a fancy way of restoring to factory settings? I was wondering whether there’s a pin-hole-esque reset anywhere? I honestly don’t mind starting from scratch; I just want my phone back! I’m going to wait for tomorrow until I do anything in case the wipe is just taking a really (really) long time. I’d just like to know in advance if there’s another solution. I would prefer to find the solution myself rather than going to my provider, who will probably leave me totally phoneless for weeks! So: how do I reboot/cancel the wipe if I need to considering I can't remove the battery? Any help appreciated!

  • Why is it taking so long to download lion? It has been over 10 hours and I have a high speed connection!!

    I have an iMac core 2 duo Mac OS X (10.6.8) and my download has taken over 10 hours and it is still not done!!  I have a high speed connection.  What is up with this?!?

    Are you trying to install Dreamweaver app from Adobe Creative Cloud application ?
    If so , may I know @ wat percentage the progress at stuck ?

Maybe you are looking for

  • Problem with Premiere Elements 11 uploading mp4 files

    I tried to upload a video footage for editing. The video was taken using a GoPro camera and the output is mP4. The footage playback on Premiere Elements 11 was choppy and stalled often. I asked someone else with the same program and he experienced th

  • Problem in displaying selected page items in the title in Graph

    Hi There; I have a problem in displaying selected value of named page item in the graphs. Eg. I have in my worksheet a page item named "Location"; when I use "&WorksheetName &Location" in the title of worksheet it is displaying both the worksheet tit

  • How to pass Variable value to SWF file in Eclipse development

    We are creating Widget file in Eclipse by using SAP Widget Foundation . We included one SWF file in Widget & it is working fine. But we are not able to pass the values to SWF file variables.? How to pass variables to SWF file let us know. Thanks & re

  • Physical Tables based on select with parameters

    I have a database query that receives some input parameters and it worked fine when I run this query from any sql tool, The query is very complex and the input parameters are not associated in the sql to a specific column, they are associated in the

  • Improving Performance of Dynamic SQL in Pro*C

    I am using Dynamic sql format 3 in pro*C, i.e prepare sqlstmt from :sql_stmt declare cursor c1 for sqlstmt But the query is slow .I am also using order by with ltrim(rtrim(colname)) & sometimes group by . can anyone tell how to improve performance of