4 Pole mini plug to 9 pin Mini DIN Adpater cable in Australia?

I have been trying to contact Creative Labs Australia about this particular adpater cable but i am only getting a reply saying that, only the manager knows about it so i have been leaving messages for him to contact me for the last 4 days!!!!!!!!!!!
Does anybody know where i can buy this cable in Australia? Creative part number is CB2032000002.
This cable is used to connect the Audigy2 Platinum Ex I/O Module to either DTT2500 or DTT3500 speakers using the the DIN connector. As the I/O Module doesn't have the DIN output i will need to use the 4 pole 3.5mm miniplug to be converted into 9 pin mini DIN.
Desperetely seeking this product. Can anyone help me please

If it makes you feel any better theres no where to buy this cable in the States either. Theres only 2 places I've found so far that sells this cable. One is creative which currently lists it as "out of stock" and this place:
http://www.globalsources.com/gsol/I/Mini-DIN-Plug/p/2000000003844/30000004968/bg/006604.htm
Only problem with that site is that it only sells the cable in lots of 3000, so you have to buy 3000 of them. If anyone knows of a place to get this cable please let me know as well.

Similar Messages

  • Mini-din midi cables

    i'm having trouble finding mini-din to full size din cables for sale online
    can i use these?http://www.opentip.com/Electronics-C...-p-877355.html cables and just remove the 6th pin?

    these sites only have the 6 pin adapters for sale
    i want to know if these cables are equivalent to the 5 pin (after removing the extra pin) cables included with creative products. or do these cables have completely different pin outs?

  • Male 8 pin Mini Din Mac to USB adapter cable

    I have an old Opcode Translator Pro Midi interface that I used with an old Mac. The CPU and Thru connections used an 8 pin Mini Din Mac cable via Printer or Modem input on the Mac. The unit is G8 as it has 2 In and 6 Out Midi sockets which I want to use with my keyboard controller (non USB) and a Roland MT-120 Synth. I now have a new iMac which uses USB 2 and Firewire. Is there such a cable which has USB on one end and Male 8 pin Mini Din Mac on the other? Or wouldnt this type of connection work?
    Is it possible to convert the Opcode Translator Pro somehow to USB 2?

    allyshake,
    Sounds like you have done a good job of thinking this through.  A new adapter box makes a lot of sense.  Have you considered finding a new home for the older equipment so that the complete set gets used?
    Ji~m

  • 9-pin mini DIN socket

    Does NX7950GT-VT2D512EZ-HD have a 9-pin mini DIN socket? I want to connect the card to my televison via s-video. Is this the correct cable: http://www.hama.de/portal/articleId*125830/action*2563/searchMode*1/bySearch*34098#1 ??
    Does anybody know where I can buy a cable/adapter (HDTV / Video-out connection cable) that is similar to the one that came with the card?
    All the best!
    eha

    Quote from: eha on 25-January-07, 18:17:12
    From MSI technical support team: "Besides, NX7950GT-VT2D512EZ-HD don't have a 9-pin mini DIN socket and please refer to the link to get more information: http://www.msi.com.tw/program/products/vga/vga/pro_vga_detail.php?UID=765
    What ???
    Does anybody know where I can buy the adapter/cable that came with the card?
    eha
    as i can see its 9pin mini DIN socket...
    "Does anybody know where I can buy the adapter/cable that came with the card? "
    in some computer store/shop.

  • Looking for 9-pin mini DIN to 9-pin mini DIN GREEN for Inspire 5700 digital

    hi guys, I'm looking for this cable.
    9-pin mini DIN to 9-pin mini DIN (2 meters - Green)
    for my Inspire 5700 digital.
    http://images.americas.creative.com/...mall89___6.gif
    Currently I'm using the RED version from FPS2000, but I get no sound for Center speakers and SubW. So I suspect both cables are different internally although the connectors are the same.
    Anyone knows where to get it in Msia.. or can I buy it from Creative Spore?
    OR
    Anyone using this set with analog mode, then can sell this DIN cable to me..
    Thanks

    hi body,where did u get that cable?i need that cable too!!!!!!!!!
    please help me out!!!!u can check my post in this forum
    http://forums.creative.com/creativel...message.id=448

  • No digital audio out with mini TOS Link cable.

    In the past I've been able to play audio through my Onkyo receiver and speakers using a mini TOS Link cable. However, today when i plugged the cable in no audio is being sent.
    Things I've discovered:
    1) Audio works for other devices plugged into the same input on the receiver.
    2) The audio plays on the internal Macbook speakers. When I plug in the TOS Link cable during playback it just goes silent.
    3) In the Sound control panel, the output does change to Digital Out. (so the Macbook recognizes the cable)
    4) The red light comes out of the end of the cable that plugs into the receiver.
    5) The receiver normally makes a click sound and switches to a proper sound mode when it detects a digital signal. It does not do when I plug in the TOS Link cable.
    I have rebooted, reset the pram, repaired permissions.

    I am having this same problem, any ideas? Troubleshooted the cord, the mini adapter, the reciever, no dice. It has to be something with software, I had a hard drive crash and it worked before, but not now.

  • How can I connect my MBA 11" 2012  to my Imac 21.5" mid 2010 as a display unit. Connected using a mini display port cable and this did not work. Any guidance welcome. Thanks. John

    I bought a belkin mini display unit cable( new) and connected the thunderbolt port in the MBA ( 11" , mid 2012) to the Imac mini display unit port using this cable. Pressed the CMD & F2 keys on the Imac keyboard as required but this did not work. Should I try with another cable ? Should i try with a thunderbolt cable ( recommended by appple support ) -- but they too were not sure about this. Is the Mid 2010 21.5" Imac not able to function as an display unit? Any guidance would help and will be much appreciated.

    Welcome to Apple Support Communities
    Only the 27-inch iMac and Mid 2011 and newer iMacs can be used as an external screen, so you can't use your Mac as an external screen. See > http://support.apple.com/kb/PH11302
    You can still use your iMac as an external display, using an application like ScreenRecycler

  • I am trying to connect a 24" cinema display with mini display port cable to a 24" imac with a displayport - is there a cable for this as these two connections are two different sizes

    I am trying to connect a 24" cinema display with mini display port cable to a 24" imac with a displayport - is there a cable for this as these two connections are two different sizes

    Hi Gilly,
    I have no proof, but I think it will not work with an adapter, only Mini Display Port or Thunderbolt.

  • Can i use a hdmi to mini display port cable to use my iMac as external monitor for a windows laptop?

    Does anyone know if a hdmi to mini display port cable can be used to link a  windows laptop with an 27 inch iMac to use the iMac as an external monitor. Or are there other options to connect my DELL latitude 6430?

    Is the 3.5mm-to-optical cable any better than using a standard 3.5mm?  I don't know too much about this stuff.  My thought process was that if the source of the connection is a 3.5mm jack, does it make a difference using a cable that starts as a 3.5 and converts to optical?
    Chances are excellent that if your receiver is less than 20 years old it has an optical input, this is a digital signal which will sound MUCH MUCH better than using an analog 3.5MM to 3.5MM connection. I recommend using the cable suggested or one with the same connections but of a different length if your needs warrant it.

  • Mini-DVI extension cable?

    Has there ever been such a thing as a mini-DVI extension cable?
    I use an external monitor with my MacBook, so I have to use the mini-DVI to VGA adaptor. The problem is that I now have this big bulky VGA connector sitting on my desk just to the left of my MacBook.
    I figured that I would simply go buy a mini-DVI extension cable that would allow me to get the VGA connectors off of my desk. However, I have searched all over the Internet and found that such a cable does not exist.
    The only thing that comes close is a 1.8 meter Male-to-Male mini-DVI cable available from shentec.com (http://www.shentech.com/apmitomimato.html). But of course I need a Male-to-Female cable.
    Since the mini-DVI connector is primarily only used by Apple, it would be nice if Apple would build and sell mini-DVI extension cables in 2 or 3 varying lengths.

    Dang...
    I tried to see if CablesToGo could make a mini-DVI extension cable and this was their reply:
    {quote} +"Unfortunately we cannot build a cable like that. It is an Apple proprietary connection that we cannot obtain.+
    +We apologize for any inconvenience. "+{quote}
    I'll have to try some other companies...maybe newertech.com and Dynex. Anyone know of other companies that could make this cable?
    Pictures
    http://img176.imageshack.us/img176/9297/minidviadaptercr2.jpg
    http://img441.imageshack.us/img441/5157/minidviextensionsf3.jpg

  • I have the mini display port cable to hdmi.  When I connect I can get audio but on the video I get the display auro screen and can't get my actual display to show as that is not what shows on my display.  How can I fix this?

    I have the mini display port cable to hdmi.  When I connect I can get audio but on the video I get the display auro screen and can't get my actual display to show as that is not what shows on my display.  How can I fix this?

    System Preferences>Displays
    There is a little white bar. When you have your TV connected, move the white bar to the other display. Your main desktop is now the TV screen

  • Windows migration assistant won't go passed the first screen. Connecting hp files to new Mac mini with Ethernet cable. Also tried USB

    Windows migration assistant won't go passed the first screen. Connecting hp files to new Mac mini with Ethernet cable. Also tried USB

    Are you following these instructions?
    http://support.apple.com/kb/ht4796
    Have yo tired by connecting both to same network vice direct ethernet connection?
    There is no direct USB connection

  • Have scanner with mini din port. convert to usb?

    hate to toss old visioneer paperport B & W with mini din port.   Could probably be used with my macbook with a usb port.  guess there is no converter.  have searched online.

    Is it a PaperPort Vx from approx. 1996? That model could be used over a serial connection (or SCSI, if a special SCSI adapter was added).
    Even if it were possible to connect the scanner to a modern computer (for example, via a USB-to-serial adapter), I guess that compatible scanner software would be hard to find (two drivers for earlier Mac systems can be found through http://support.visioneer.com/products/Sheetfed/downloads.asp).
    Do you still have an older Macintosh computer? If so, one could perhaps scan documents there, and then use a network to transfer files to a modern Mac (exact method depending on the type of computers involved). If not, you may even want to buy an old Macintosh computer just for the purpose (to be used as a "converter"). The minimum requirements appear to have been a 68020 processor Mac with System 7.
    Jan

  • Mini Displayport/HDMI cable & Audio Y cable to Vizio. No sound!

    13-inch MacBook Pro, mid-2009
    Vizio E320i-A0
    I connected a mini displayport/HDMI cable and a audio Y cable (Dynex 3.5mm RCA) from my MacBook Pro to my Vizio TV and I can't get any sound through the TV; however, I do get a picture.  Called Vizio and, of course, they say there are no audio settings that need to be changed on the TV.  Reviewed other discussions about this topic and tried changing the Audio MIDI Setup, but I don't get the same options. Do I have the wrong cables?

    alex94598 wrote:
    I have a new retina mac with an hdmi port but I had the same problem with no audio.
    I fixed it by going into system prefs -> sound -> output and selecting the TV as the output
    Make sure your TV is connected when doing this
    TV is not one of the options when I follow those directions.  My only option is "Internal Speakers" and my Airport Express.  I think those directions work for you because you have a later model Mac... but thank you for your help. :-)

  • 30 pin male to female cable

    Just got a Micropack battery. Provides 8 hours of video play. Problem is when you place the Touch into the dock, you have to turn everything sideways in order to view movies in landscape mode. I am trying to locate a 30 pin male to female cable so I can plug the female end into the dock and the male end into the Touch. That way the power pack can be seperate from the Touch and I can watch video in landscape mode with relative ease. I have searched the web and cannot find this simple cable. Any suggestions? Thanks
    <SCRIPT language=JavaScript>
    <!--
    var SymRealOnLoad;
    var SymRealOnUnload;
    function SymOnUnload()
    window.open = SymWinOpen;
    if(SymRealOnUnload != null)
    SymRealOnUnload();
    function SymOnLoad()
    if(SymRealOnLoad != null)
    SymRealOnLoad();
    window.open = SymRealWinOpen;
    SymRealOnUnload = window.onunload;
    window.onunload = SymOnUnload;
    SymRealOnLoad = window.onload;
    window.onload = SymOnLoad;
    //-->
    </SCRIPT>

    http://shengyihtech.manufacturer.globalsources.com/si/6008800656103/pdtl/iPod-ac cessory/1001067840/30-PIN-Connectors.htm
    That?

Maybe you are looking for

  • DB Connection failed in Netweaver 2004s ABAP

    When I try to start Netweaver 2004s ABAP, I am getting error message as "DB Connection failed". I have used the system for two days and executed transaction 'sgen'. Now the disp+work is getting started and stopped immediately. Please give me a soluti

  • OCS 10.1.2 on Win2003 - mail application cannot start after rebooting serve

    Hi We have installed OCS 10.1.2 on Win2003 (single box) and the mail appln was running OK after the installation. On rebooting the server, we found some components that were not started (eg Internet directory for Infra) which we started manually via

  • Looking for Reign of Fire starring cristian bale and Matthew McConaughey.

    I have been looking for Reign of Fire starring cristian bale and Matthew mcconaughey. How do I put in a request to have this movie available on iTunes?

  • Userexit in the idoc invoice

    hi experts, i have a requirment like that , our client sending the invoices through idoc. my requirment is that, in  the invoice now the name of the payer is printing ,but in that place it should  print the contacat person name. could u please tell m

  • Using GetProcAddress to find JNI_CreateJavaVM

    Hi, a quick question. I understand the function below returns the address of the JNI_CreateJavaVM function. How exactly do I use it below to call the function (i.e. JNI_CreateJavaVM)? Note: GetJVMLibrary returns the location of jvm.dll on the system.