4 red. What do I do?

I have the K*N Neo. I just bought it, installed and been stuck at 4 red.
PLEASE help.

Quote
Originally posted by realstrategos
Believe it or not, I had nearly the same problem.
The computer would sometimes boot and then just crash seemingly.
Or sometimes it wouldnt boot at all and it would show 4 red.
The problem:
My keyboard.
How, why, what I can only guess that it had something to do with feedback or shorting somewhere in my keyboard that went into the system and it is only possible because it is serial.
Hope that helps someone out there.  It had me baffled for 4 days trying everything, and I am a so called expert.  Never thought Id see the day where a keyboard could do it though . . .
I had exactly the same thing, had me scratching my head for ages, new k/b = problem solved.

Similar Messages

  • NI Visa interface IO returns BFFF003D in red. what does this mean?

    Greetings,
    I'm attempting to communicate with a RAW device using NI-VISA USB.  Device connects okay.  When I attempt to use Interface IO, the response is BFFF003D.  What does this mean?  Why is it in red?
    Craig

    Craig,
    The code you have specified appears to be a VISA error: Invalid buffer mask specified.  You may want to check this link for more information on this error.
    http://digital.ni.com/public.nsf/websearch/AD03F1520934D67F86256D4B001DC2CE?OpenDocument
    If you have more questions, please post some more specifics about your application.
    Little A

  • The transport status is red,what I should do?

    Hello:
        When I do the first step of transport,transport the change request to 300 client.
        The status is unexpected change red and show the transport is error.
        I want to come back the status green,But I don't know  what I should do ?
      lexian
      Thanks a lot!

    Hi le,
    just check your transport log in stms and also just check if you are re iporting the workbench request in the same system again then it will throw an error.
    Regards,
    Vamshi.

  • PXI Chassis Power LED Flashing Red: What to do?

    My NI PXI-1042 keeps blinking red the Power LED. I know it means the voltage is out of the specs. What to do?

    FilipeTaveiros wrote:
    But it is not continuously red.. It is blinking red.. Thanks for your help. Anyone? 
    This is copied right out of the manual: 
    The chassis power switch has an integrated LED. This LED indicates one
    of three different conditions:
    • If the power switch LED is steady green (not flashing), the chassis is
    powered on and operating normally.
    • If the power switch LED is flashing green, the air-intake temperature
    has exceeded the chassis operating range.
    • If the power switch LED is flashing red, the power supply outputs are
    not within voltage regulation requirements.
    You either have a power supply problem, or you are loading it down with too many modules.  Try running it empty and see what the light does. 
    Using LabVIEW: 7.1.1, 8.5.1 & 2013

  • CIsco AIR LAP1131AG E K9 Status LED = Yellow; Ethernet LED = Off; Radio LED = blinking Red, what is this? it isn't in the manual

    CIsco AIR LAP1131AG E K9 Status LED = Yellow; Ethernet LED = Off; Radio LED = blinking Red in a pattern, red off then red red, Our AP isn't working it won't show up on our Cisco WLC 2125 anymore and this is the LED indicators, I've checked in the manual and this combination of LEDs do not exists??

    No cisco web is working perfectly.
    do you have a valid CCO id with smarnet contract ?? then only you can download new IOS for AP:
    Autonomous AP image:
    http://software.cisco.com/download/release.html?mdfid=279537722&flowid=6775&softwareid=284180979&release=12.4.25d-JA2&relind=AVAILABLE&rellifecycle=ED&reltype=latest
    LAP AP image:
    http://software.cisco.com/download/release.html?mdfid=279537722&flowid=6775&softwareid=280775090&release=12.4.25e-JAP&relind=AVAILABLE&rellifecycle=ED&reltype=latest
    Regards

  • IPod Works but everythingi has the color Red What is this???

    My iTouch is acting really weird. It works, I can see my home screen play music everything. But it has this Red tint. I haven't changed settings of the background. So any advice anyone?

    Try this 1st:
    The so-called 5-R's will cure 90% of iPod users problems. They're really easy to do so give them a try and if they fail to solve your issue post back in this forum - there are many willing helpers who I'm sure will be able to offer further assistance. Click this LINK.
    MB67

  • HT1212 my ipad is disabled but the disabled word is not in red,what can i do/

    hello everyone can u help me with my problem?

    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
    You may have to force iPad/iPod into Recovery Mode
    http://support.apple.com/kb/ht4097

  • My network extender gps and sys light is blinking red .What can I do to fix it?

    How can I fix my network extender ?

        Let's ensure we get your network extender back up and running! How long has this been going on? Have you powered cycled the network extender. This will refresh wireless signal to the device. You can also check out some quick troubleshooting steps here; http://vz.to/18CndNE
    YosefT_VZW
    Follow us on Twitter @VZWSupport

  • All records loaded to cube successfully but the request is in red status

    All the records are loaded from r3 to target, but the status of the request is still in RED, what is the reason and how to resolve it?

    Hi,
    If you find the records are loaded to cube and request is still red, Follow any one of the following options.
    1. Make the request to green manually
    2. Check the extraction monitor settings in SPRO -
    > SAP Customizing Implementation Guide  ---> Business Intelligence  --->  
        Automated Processes  -
    > Extraction Monitor Settings. Check how the settings are done if you are authorized.
    3. Go to Manage of the target ---> Environment ---> Automatic Request processing ---> Check the option Set Quality Status to OK
    Hope this helps,
    Regards,
    Rama Murthy.
    Edited by: Rama Murthy Pvss on May 11, 2010 7:39 AM

  • Why my screen looks red?

    I have tree weeks with my new macbook pro and today when i turn on the computer the hole screen looks red  , what the heck!
    what cai i do????

    you can and should call AppleCare.  You have 90 days of free technical support from Apple trained employees.  The forums are for people with no warranty left.  It is to be used a a last resort.

  • St02 swaps red

    Hi all,
    When i checked the swaps in st02 it is showing as red.What to do plz.Should i change the parameters.
              Buffer            Hitratio   Allocated         Free space        Dir. size      Free directory         Swaps       Database
                               [%]       [kB]         [kB]         [%]      Entries      Entries       [%]                   accesses
    Nametab (NTAB)
      Table definition        96.10         7,151            0     0.00        30,000            0     0.00       159,968      385,089
      Field description       96.55        32,344        5,702    19.01        30,000       21,404    71.35       254,965      263,737
      Short NTAB              99.74         3,438        2,137    85.48         7,500        5,803    77.37             0        1,697
      Initial records         96.18         5,438          177     3.93         7,500          654     8.72        96,328      103,175
    Program                   93.68       500,000        1,322     0.28       125,000      111,378    89.10       161,705      626,010
    CUA                       99.94         8,000        4,836    70.38         4,000        3,475    86.88             0          530
    Screen                    99.86        25,391       18,314    72.89         4,500        4,016    89.24             0          516
    Calendar                 100.00           488          394    82.08           200           95    47.50             0          105
    OTR                      100.00         4,096        3,531   100.00         2,000        2,000   100.00             0            0
    Tables
      Generic key             99.99        99,023        9,072     9.44        13,000          998     7.68            12       59,612
      Single record           97.10       100,000       75,927    76.12         1,000          876    87.60             0      171,530
    Export/import             66.42        20,000       11,764    81.85        20,000       18,587    92.94             0            0
    Exp./Imp. SHM             16.95         4,096        3,490    98.84         2,000        1,999    99.95             0            0

    Hi Ambarish,
    These are the values which u can take as reference
    rsdb/ntab/entrycount               30000                       
      rsdb/ntab/irbdsize                  4000
      rsdb/ntab/sntabsize                 2500
      rsdb/cua/buffersize                 5000
      sap/bufdir_entries                 10000
       zcsa/table_buffer_area          50000000
      zcsa/db_max_buftab                 10000
      rtbb/buffer_length                 30000
       rtbb/max_tables                      500
    Release 4.0/4.5:
       rsdb/obj/buffersize              4096          (kB)             
       rsdb/obj/max_objects            5000          (buffer entries)
       rsdb/obj/large_object_size       8192          (Byte)           
    As of Release 4.6:
       rsdb/obj/buffersize            20000            (kB)          
       rsdb/obj/max_objects            20000                         
       rsdb/obj/large_object_size       8192          (Byte)    
    extend the buffers to 30 -40%  this may help you
    Regards'
      Zia

  • Red flashing light and nothing else

    My blackberry curve 9360 kept restarting then having a white background with app error 200. And now it has stopped that and nothing will appear on the screen and the led light just keeps flashing red what could I do to fix this?

    courtneyannefox wrote:
    My blackberry curve 9360 kept restarting then having a white background with app error 200. And now it has stopped that and nothing will appear on the screen and the led light just keeps flashing red what could I do to fix this?
    Hi and Welcome to the Community!
    To add to the above all-too-brief instructions, here is the official KB concerning the "200" error:
    KB30100 "JVM 200" appears on the BlackBerry smartphone
    But, what is likely now the problem is that your battery has run down flat, and you can't attempt any recovery until that is first remedied. So please try this sequence...note that, throughout the entire 4h15m process, your BB must remain connected to a known-good wall charger (not PC USB):
    With the battery inside, connect your BB to the wall charger
    Leave it alone for 2 hours, no matter what the LED or the display does
    Remove the battery
    Wait 15 minutes
    Insert the battery
    Wait another 2 hours, no matter what the LED or the display does
    This has been known to "kick start" some BBs.
    It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
    Obtain a known good and already fully charged additional battery...use it in your BB and see what happens
    Obtain access to a known good and identical BB...use your battery in it and see what happens
    The results of this will indicate if it's your BB or your battery that has the problem.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Battery indicator, flashing red?

    when i put my battery in, the indicator flashes blue; a few minutes later, it flashes red.
    what the heck does that mean?
    ps- i haev a lenovo s10 if that changes anything
    Message Edited by jehan60188 on 05-24-2009 05:59 AM

    Hi, 3 LEDs..are on the front side ...form left to right....
    Indicator LED Left: is Power Normal Blue
    LED Center is Battery status:
    Blue : The battery is charged to 95% or more of its capacity.
    Blinking blue : The battery is being trickle-charged
    Orange : The battery is being normally charged.
    Blinking orange: The computer is operating on battery power, and the battery is charged to no more then 8% of capacity.
    RED is not documented... didnt hear that it could flashes in red... But could be a contact fault ... or have had problems at charging... sometimes i heard that it flashes orange between failure charging... and charges very slow...
    that could be raised the time of charging to 8-12h... and then it flashes blue and orange but never red....
    Normal time for charging
    a 6 cell is fully charged in 2:40-2:50h ...
    and i dont have the 3 cell ...but must be quiet equal in 1:20h - 90 minutes for the 3 cell batt...
    Right LED is wireless status...
    If that happens more than one time, contact you local lenovo service for exchange the battery..
    sincerely KalvinKlein
    Message Edited by KalvinKlein on 05-24-2009 03:35 PM
    Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
    Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

  • Wrt54g DMZ Led is red

    Yesterday while playing World of warcraft i suddenly lost my internet connection. I checked my router and the power led (green) and the dmz led was solid red??? i cant connect to the router and cant even reset it. I've searched this forum and the internet but havent found anything about the dmz led beeing red.

    What do you mean by you can't reset it?
    Hard-reset the power-cycle maybe and then re-enter the ports for WoW?

  • My new iPod touch 5g can't charge.

    i tried turning on but it only shows the battery bar with a tiny bit of red. what should i do?

    - See:
    iPod touch: Hardware troubleshooting
    - Try another cable
    - Try another charging source
    - Look at the dock connector on the iPod. Look for abnormalities like bent or corroded contacts, cracked or broken plastic.
    - Make an appointment at the Genus Bar of an Apple store.
      Apple Retail Store - Genius Bar
    Could be the cable since some 5G iPods were shipped with defective cable. Call Apple or make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Unable to send messages in XI

    Hi iam trying to test a  XML message in XI-component monitoring.
    iam able to send the message but when i check in SXMB_moni this message is having the error..
    NO_RECEIVER_CASE_ASYNC
    No receiver could be determined
    Can any body tell me where am i doing mistake.
    Thanks,
    Amith

    HI ,
    I checked the receiver determination for the service ,it has a receiver determined and there is no condition detemined.
    Also the integration engine is in status red.what does this mean?
    Can you please tell me what details should i give in the test message of component monitoring.
    Its asking me for service,interface name and interface namespace...
    all these details are to be given of sender ,am i right?

Maybe you are looking for