4 TB WD Re HDD formatting Issue

Hi. I Have 2 WD 4 TB Enterprise Grade HDD.
WD4000FYYZ
SATA 6 Gb/s
3.5 Inch
7200
4 TB
64 MB
I had created Mirrored RAID of 4TB using disk utility. I had copied about 3.5 TB data on this RAID & as I was running out of space I wanted to dissove this RAID & use these drives as Individual volumes.
So I went into Disk Utility & demoted these drives & dissolved RAID. I was expecting 2 Volumes now mounting as seperate drives containing identical data as Disk Utility Prompted before dissolving this RAID.
Instead I got this single RAID Volume named Untitled & on Launching Disk Utility it started Data Rebuilding (???).
Understanding that something gone wrong & having back up of this entire data I decided to format these drives seperately in 2 diff MacPros.
While trying to format, one drive formatted perfectly but 2nd drive was still unable to format.
So it was decided to format these drives once on Windows Machine in NTFS & then putting them back in MacPro & formatting for Mac OS Extended Journaled, in order to get clean disks.
HDDs were sucessfully formatted but on putting them in One of Mac Pros, it was discovered that HDDs wre mounting & functioning fine but in disk utility I was not getting all the Options for HDDs.
I have attached sceenshots of this problem.
Kindly advise on how to solve this issue.
Thanks in advance
Yogesh

This is way out of my area of expertise so take that into account in all that follows...
From the "Type: logical volume group" line in your screenshot, it appears you have a "CoreStorage Drive" -- a virtual drive made up of two physical drives, somewhat like a RAID. This article explains how to make one, but it also has info about how to destroy one.
For more info about this, you might want to read through the coreStorage | cs coreStorageVerb […] section of the diskutil man page.

Similar Messages

SATA HDD FORMAT ISSUES TRACED BACK TO Neo4 Platinum?

Hi everyone,
I have just built a new computer with the specs below, and I can not get the machine to properly format the harddrives. I have two SATA WD 200 gig (series 1) Hdd's that I have been trying to format, but they freeze up in windows format. Lifeguard (WD) formatted the drives fine in quick, but froze up on normal NTFS. I have tried all combinations on the native 4 sata spots, and even tried just using one hdd. I also tried my friends Seagate 300 gig sata and found it froze up during file install on Windows MCE 2005. Therefore, it does not look like it's the drives, but rather a communication with the motherboard. I have made sure that the bios had the "allow larger hdd sizes" checked, but yet did not help the problem.
I am hoping that some of you have come across this problem, as I am all out of ideas. I tried to update the bios from 1.1 to 1.8 but recieved a weird error of "source file not found". I am hoping it's a BIOs Issue becaue I am all out of ideas on this and 1.1 is extremely old compared to 1.8. Hopefully it's not a bad board.
(DRIVES ARE LOCATED on 3 and 4 slot)
AMD 64 3500+
Mushkin 1 gig (512 x2) Dual Channel DDR 400 Ram
2x WDigital 7200 SATA 200 gig (series 1) HDD
Nvidia OC 6600 128
Happauge 500MCE
HDTV wonder card
500 Watt Power supply By Ultra X-Connect
* I read the FAQ on this issue, however my BIOs tells me that if I only have 1 HDD installed and try the Raid Trick, it says "not enough HDDS". I for sure do not want a RAID system for my two drives.
* I have also tried the floopy's as well that came with the board and literally an option I could think of. The only thing I have not done is updated the BIOS.
* I also found this forum thread located on your site with the same issue (https://forum-en.msi.com/index.php?topic=58990.0)

Thank you so much for a quick reply
I have brand new OEM Media Center 2005 (2 cd) setup set. I would think that it would?

Crystal for VS 2010 - formatting issues in viewer (extra space) again

We're having the same problem as the one in this thread link:[Crystal 2008 for VS 2010 - Report formatting issues in viewer (extra space);. There's no resolution in the thread and it's been closed. I'm hoping that creating a new thread may cause someone to answer this problem.
We have a Windows App that we just converted to .NET 4.0 and updated the viewer to the Crystal Reports Viewer in VS 2010. When we open a report that has a large block of static text in paragraphs left-aligned the spacing around punctuation is awful - there's almost a tab's worth of space between the last letter and the period. U.S. looks like US. This happens both with reports that were created in VS2008 and ones that were created in VS2010. It is only a problem in the viewer's display - if we print to a printer or export to PDF the spacing around punctuation is fine. It's also not a problem on our development workstations which are running Windows 7, but is a problem on our test servers which are running Windows 2003 Server. I ran the modules tool and found that the version of usp10.dll does match what the previous thread said it should be and it's coming from the c:\program files\sap businessobjects\crystal reports for .net framework 4.0\common\sap businessobjects enterprise xi 4.0\win32_x86\ folder. On my development machine when I run the modules tool I notice that a second instance of usp10.dll is called which is the version installed with Windows 7. We've tried changing fonts but none of the ones we've tried (originally in Times New Roman, 12, tried Arial, Times and various sizes) have made a difference. We also tried changing the print options with no improvement. The only thing that makes it slightly better is full-alignment but our customer insists that it be left-aligned.

Re. the other thread. I never did receive a sample of the report to test with. Perhaps I can get one from you? I need you to ensure that the issue occurs with a "saved data" report. If it does, let me know if you can share it and I'll contact you via email. My comment in the other thread re. available time, priorities, etc., still applies. Also, just to be clear. Service Pack 2 for CRVS2010 is closed now. Thus if I am able to reproduce the issue the fix will be targeted for October \ November time frame - no guarantees though...
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

How to resolve formatting issue when eprint from an iPad to Officejet 4500

Just activated the eprint app on my IPad. It found my HP Officejet 4500 Wireless printer but the formatting is wrong when printing an email. Is there a solution?

Do you maybe have a photo of the formatting issue you could post here? Thanks, Ciara
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/Printing-photos-from...
Although I am an HP employee, I am speaking for myself and not for HP.
Twitter: @Ciara_B_HP

I have connect a seagate HDD formated on NTFS to my macbook pro with Mac OS 10.7 but my HDD is read only any idea how can i change it to read & write ?

i have connect a seagate HDD formated on NTFS to my macbook pro with Mac OS 10.7 but my HDD is read only
any idea how can i change it to read & write ?

i tried the trial version of tuxera and it gives me the possibility to read & write , Thanx fschweig.
@ Samberl : what is the benifts of keeping my drives on mac format and this SW mediafour i install on my PC to let it write the mac formated HDD ?
is it free ?
all the best
Adiab

Formatting issues: when I open a msg, the font is sooo small you need a magnifier to read it. How can I set the font size to one I can easily read?

== Issue
==
I have another kind of problem with Firefox
== Description
==
I have various formatting issues:
a. When I open a msg from my web browser (Cablevision), the font is sooo small I need a magnifier to read it. How can I set the font to a size I can easily read?
b. When I forward msgs, the text gets all distorted and I need to clean it up (some symbols, lots of spaces between words). How can this be fixed?
c. When I want to tell someone about a website, I cannot type the URL in so that all they have to do is click on it. How can this be fixed?
d. When I open messages, the text opens in a small window and covers the "Show Images" button. Why?
== This happened
==
Every time Firefox opened
== Ever since I started using Firefox (a few months ago)
==
'''Troubleshooting information'''
I didn't find any results
== Firefox version
==
3.6.3
== Operating system
==
Windows 7
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3
== Plugins installed
==
*-nphpclipbook
*Office Plugin for Netscape Navigator
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*The Hulu Desktop Plugin allows Hulu.com to integrate with the Hulu Desktop application.
*Shockwave Flash 10.0 r45
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*iTunes Detector Plug-in
*3.0.40624.0
*NPWLPG
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers

The text editor is the text area that you use on the webmail (Yahoo, Hotmail) website to create a new mail.
You can compare that with the ''Post new message'' text area that you use to create a new post on this forum.
Just above the text area that you use to enter the message text there is usually a button bar with buttons that allows some text formatting like Bold and Italic and can also include a button to make a clickable hyperlink.
Check the tooltip of each button by hovering with the mouse over each button.
Make Link - https://addons.mozilla.org/firefox/addon/142

Format issue in opening an XLS attachment sent through email by ABAP2XLSX

I have downloaded the ABAP2XLSX nuggets and tried to send an attachment in the email using the SAP. But when opening the attachment it is giving up an format issue and not able to view the content. I am able to save the XLSX file on the PC and able to read it but when I send it to email it doesn't open correctly and it is in a non readable format. Please find the code that I have been using. Can someone help me on this.
TYPES: BEGIN OF tp_zzrule,
         zzprog     TYPE zzfunc,
         zzdata     TYPE zzcri1,
         zzseq      TYPE zzseq,
         zzkey1     TYPE zzkey1,
         zzkey2     TYPE zzkey2,
     END OF tp_zzrule.
DATA: w_zzrule   TYPE tp_zzrule,
      t_zzrule   TYPE TABLE OF zzourule.
TYPE-POOLS: abap.
DATA:   v_document            TYPE REF TO cl_document_bcs,
        v_recipient           TYPE REF TO if_recipient_bcs,
        v_main_text           TYPE bcsy_text,
        v_send_request        TYPE REF TO cl_bcs,
        v_msub                TYPE so_obj_des,
         v_size               TYPE so_obj_len,
        v_string2             TYPE string,
        v_attsub              TYPE sood-objdes,
        v_mailid              TYPE ad_smtpadr,
        v_sent(1)             type c,
        v_sent_to_all         TYPE os_boolean,
        v_string              TYPE string,
        v_repid               TYPE sy-repid,
        v_title               TYPE so_text255,
        v_dochead             TYPE so_text255.
DATA lt_test TYPE TABLE OF sflight.
DATA: lo_excel                TYPE REF TO zcl_excel,
      lo_excel_writer         TYPE REF TO zif_excel_writer,
      lo_worksheet            TYPE REF TO zcl_excel_worksheet,
      column_dimension        TYPE REF TO zcl_excel_worksheet_columndime.
DATA: ls_table_settings       TYPE zexcel_s_table_settings.
DATA: lv_file                 TYPE xstring,
      lv_bytecount            TYPE i,
      lt_file_tab             TYPE solix_tab,
      t_objtxt like solisti1   occurs 0 with header line,
      t_objbin like solisti1   occurs 0 with header line,
      t_objpack like sopcklsti1 occurs 0 with header line,
      t_reclist like table of somlreci1 with header line.
DATA: lv_full_path      TYPE string,
      lv_workdir        TYPE string,
      lv_file_separator TYPE c.
CONSTANTS: lv_default_file_name TYPE string VALUE 'multi sheet test.xlsx'.
PARAMETERS: p_path TYPE zexcel_export_dir,
            p_empty TYPE flag.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_path.
lv_workdir = p_path.
cl_gui_frontend_services=>directory_browse( EXPORTING initial_folder = lv_workdir
                                              CHANGING selected_folder = lv_workdir ).
p_path = lv_workdir.
INITIALIZATION.
cl_gui_frontend_services=>get_sapgui_workdir( CHANGING sapworkdir = lv_workdir ).
cl_gui_cfw=>flush( ).
p_path = lv_workdir.
START-OF-SELECTION.
IF p_path IS INITIAL.
    p_path = lv_workdir.
ENDIF.
cl_gui_frontend_services=>get_file_separator( CHANGING file_separator = lv_file_separator ).
CONCATENATE p_path lv_file_separator lv_default_file_name INTO lv_full_path.
SELECT *
    INTO TABLE t_zzrule
   FROM zzourule
WHERE zzprog = 'RV63A999'.
    SELECT * FROM sflight INTO TABLE lt_test.
" Creates active sheet
CREATE OBJECT lo_excel.
For first Sheet in the excel workbook
" Get active sheet
lo_worksheet = lo_excel->get_active_worksheet( ).
lo_worksheet->set_title( ip_title = 'Test sheet one').
ls_table_settings-table_style = zcl_excel_table=>builtinstyle_medium2.
ls_table_settings-show_row_stripes = abap_true.
lo_worksheet->bind_table( ip_table          = lt_test
                            is_table_settings = ls_table_settings ).
lo_worksheet->freeze_panes( ip_num_rows = 3 ). "freeze column headers when scrolling
column_dimension = lo_worksheet->get_column_dimension( ip_column = 'E' ). "make date field a bit wider
column_dimension->set_width( ip_width = 20 ).
For second Sheet in the excel workbook
lo_worksheet = lo_excel->add_new_worksheet( ).
lo_worksheet->set_title( ip_title = 'Second sheet' ).
lo_worksheet->set_cell( ip_column = 'B' ip_row = 2
           ip_value = 'This is the test for second sheet by Pavan' ).
ls_table_settings-table_style = zcl_excel_table=>builtinstyle_medium2.
ls_table_settings-show_row_stripes = abap_true.
lo_worksheet->bind_table( ip_table          = t_zzrule
                            is_table_settings = ls_table_settings ).
This will create excel.
CREATE OBJECT lo_excel_writer TYPE zcl_excel_writer_2007.
lv_file = lo_excel_writer->write_file( lo_excel ).
" Convert to binary
CALL FUNCTION 'SCMS_XSTRING_TO_BINARY'
    EXPORTING
      buffer        = lv_file
    IMPORTING
      output_length = lv_bytecount
    TABLES
      binary_tab    = lt_file_tab.
Save the file on to the PC
cl_gui_frontend_services=>gui_download( EXPORTING bin_filesize = lv_bytecount
                                                    filename     = lv_full_path
                                                    filetype     = 'BIN'
                                           CHANGING data_tab     = lt_file_tab ).
*--Create and set document with attachment.
v_main_text-line = 'This is the main text not sure where this would print'.
append v_main_text.
TRY.
    v_send_request = cl_bcs=>create_persistent( ).      "#EC .., bzw.
    CATCH cx_send_req_bcs . "#EC NO_HANDLER
ENDTRY.
v_msub       = 'Test excel with multi sheets.XLS'.
TRY.
      v_document = cl_document_bcs=>create_document(
      i_type     = 'RAW'
      i_text     = v_main_text
      i_subject = v_msub ).
    CATCH cx_document_bcs . "#EC NO_HANDLER
ENDTRY.
    v_size = lv_bytecount.
*--Add the attachment.
TRY.
      v_document->add_attachment(                          "#EC .., bzw
            i_attachment_type    = 'EXT'
           i_attachment_type    = 'XLS'
           i_attachment_type    = 'RAW'
            i_attachment_subject = v_attsub
            i_attachment_size    = v_size
           i_att_content_hex    = lt_file_tab ).    "#EC .., bzw.
           i_att_content_hex    = lt_file_tab ).    "#EC .., bzw.
    CATCH cx_document_bcs . "#EC NO_HANDLER
ENDTRY.
*--Add document object to send request.
TRY.
      v_send_request->set_document( v_document ).         "#EC .., bzw.
    CATCH cx_send_req_bcs . "#EC NO_HANDLER
ENDTRY.
*--E-mail recipent list
t_reclist-rec_type = 'U'.
t_reclist-receiver = <email Id here>.
APPEND t_reclist.
CLEAR t_reclist.
LOOP AT t_reclist.
    CLEAR v_mailid.
    v_mailid = t_reclist-receiver.
*--Create mail recipient object.
    TRY.
      v_recipient = cl_cam_address_bcs=>create_internet_address( v_mailid ). "#EC .., bzw.
       CATCH cx_address_bcs . "#EC NO_HANDLER
      ENDTRY.
*--Add recipient object to send request.
    TRY.
        v_send_request->add_recipient( v_recipient ).     "#EC .., bzw.
      CATCH cx_send_req_bcs . "#EC NO_HANDLER
    ENDTRY.
ENDLOOP.
**--Add recipient object to send request.
TRY.
    v_sent_to_all = v_send_request->send( i_with_error_screen = 'X' ).
CATCH cx_send_req_bcs . "#EC NO_HANDLER
ENDTRY.
*--Send document.
COMMIT WORK.
IF sy-subrc = 0.
   MESSAGE s999(zou01) WITH text-020.
    v_sent = 'X'.
ENDIF.

I realize this is an old post, but am wondering if you ever resolved this. I'm having the same issue. Download an xlsx file locally opens fine, but attaching the seemingly exact same file throw errors/warnings when trying to open via an email attachment.

Can't install windondows 8.1 on my macbook pro - format issue

Can't install windondows 8.1 on my macbook pro - format issue
Running latest version of Mavericks.
Followed the exact bootcamp proceduce.
Have official window 8.1 version on cd.
All goes well until I have to format the 65Gb partition. Disk=0 and partition=4
Can't get over it. Altough I formatted it via a hint found on the internet with "dislpart" in NTFS. Wich also went weel and give the labelname "BOOTCAMP". But still no luck.
I have two questions:
1/ How to start my mac again in normal mavericks mode?
2/ How can I overcome the windows installation issue?
Tried already a lot of hints found on the internet.

First, make a time machine backup. You will need to erase ands reformat your hard drive. I had the same issue. The issue is that you can't install Windows using bootcamp without having the hard drive formatted as Mac OS Extended (Journaled). Do this from disk utility or recovery mode (hold down command and r at startup). Then you have to restore the backup to the hard drive. Then make a usb installer drive with bootcamp and then partition and install. Here's a tip: after you install bootcamp and are in the Windows desktop, go into the installer drive and then go into the bootcamp or support folder, then find a installer that contains the Apple bootcamp drivers. Also, you will need to convert the disk to an iso file. TO MAKE THE USB DRIVE FROM A DISC, USE THIS LINK
Boot Camp: Creating an ISO image from a Windows installation DVD - Apple Support

FCP and Motion formatting issues with DVCPro 50?

The material is DVCPro 50 NTSC 48khtz. (Item properties indicate that I initially digitized it properly.) My sequence settings are DV50 NTSC 48khtz.
I wanted to create a vignette effect so I exported my clips as a Quicktime (current settings) sequence to Motion. When I was done there I exported the sequence from Motion back to FCP as a DV NTSC movie.
Some of the Motion effected clips will play, look great and then all the sudden I see a black band appear on the East side of the frame. I can stretch it in Motion some but it just degrades the image so I'd rather not.
I'm surely grateful if someone can steer me in the right direction here.

Thanks for the workflow tips and suggestions. I backtracked to my original sequence and found the problem originates there. I have narrow black lines on both sides of all these clips. Since I resized a few clips with moves, I didn't recognize the problem. Now that I'm closer the root of it, any suggestions?
By the way, these problematic clips are intercut with no problem library footage that was also shot on DVCPro 50 and I took in on the same deck.
I cruised the forum for any occurence of a similiar issue and most replies seem to suggest a formatting issue. I don't get it since I think I have everything set up correctly. As a precaution, I also tossed out my preferences using FCP Rescue 5.
Welcome to the discussions, splotch.
Not sure what is causing this, but I might propose an
alternate workflow. Have your clips on the timeline
as you wish, ctrl/right click on them and select
Send To Motion.... Click the
embedded and open Motion ticks, give it a name, then
continue. Do your work in Motion, save, quit, and
fall back into FCP. Your clips may lose their
"anamorphicness" on their round trip, but just
ctrl/right click on the clip and select Item Properties/Format..., then
click on the anamorphic button.
Try this and see if you are still getting the same
problem...
Patrick

Recent convert to Apple. Previously, I backed up my family pictures from PC to an external hard drive, a WD MyBook 3T. I can view the pics on my Macbook Pro, but I can't add new pictures. I'm sure this is a format issue, any easy way to correct it?

Recent convert to Apple. Previously, I backed up my family pictures from PC to an external hard drive, a WD MyBook 3T. I can view the pics on my Macbook Pro, but I can't add new pictures. I'm sure this is a format issue, any easy way to correct it?

Install NTFS 3G
http://macntfs-3g.blogspot.com/
If you were going to be reading and writing to a NTFS System Partition, you might have to worry about the instability messing up the operating system. However, you are reading/writing from a non system, backup device so you don't have to worry about screwing up an operating system.
I would still temporarily move my data to another device and reformat the drive for Mac OS X Extended.

Re: How to restore data after HDD format?

hi, folks
I need your help to restore some important data that gone after hdd formatting.
I didn't make any backup that was my mistake.
Everyone's help is appreciated.
Thanks to all.

Hi,
it's already late to say but it's always recommended to backup data on the external medias. First of all, don't touch your hard drive, I mean don't format/move partitions. Once, i had the same problem while creating acronis recovery zone on the hard drive. Something gone wrong and I lost some data that I wouldn't mind but I also had some files from webmoney system (its' virtual money that you can exchange for real one). I tried many programs like Ontrack.EasyRecovery.Professional and e.t.c. Only with Power.Data.Recovery software could restore it. note, it's not free but Google can help you

The .txt file has formatting issues that need to be resolved

Transaction ZEHS20 runs a program that assigns a CCL Group to a specification header, based on its Active Ingredients. The transaction can be run in the background if desired with output being emailed to the user.The .txt file has formatting issues that need to be resolved. can u pls Help me to resolve this issue.
Thanks

What is the formatting issue like? Could you please elaborate a bit more.
If it is because of varying lengths in the data then it can be handled by utilising a CONCATENATE RESPECTING blanks.

Final Cut Pro to Final Cut Express -- Format issues?

Hi,
I'm shooting a project on a Panasonic HVX-200A, and my cameraman is going to import the footage to his Final Cut Pro station. He's then going to transfer the FCP footage and data over to an external hard drive, which I am going to use to edit the film using Final Cut Express.
Will there be any formatting issues if I bring the data from Final Cut Pro to Final Cut Express?
Thanks!!
Sameer Ketkar

Clip files can be easily imported into FCE if they are QuickTime DV-NTSC/DV-PAL or Apple Intermediate Codec (720p30, 1080i50/60). If they are other formats/codecs they should be converted to DV or AIC before importing into FCE.
FCPro project files cannot be imported into FCExpress.
I'd suggest a trial run before committing the project to this workflow.

Reports exported to Excel - Formatting issues

We have two Business Objects Enterprise servers (boxi r2 and boxi r3.1 sp3) running side by side. We find that reports created using boxi r2 and exported to Excel format look fine. When we run the same report and export to excel using boxi r3.1 sp3, we encounter the following formatting issues:
<ol>
<li>All columns do not fit on pages. The last 2 to 3 columns spill over onto extra pages.</li>
<li>There are some columns where most of the values are blank, but when a row is exported that has a value in that column, all subsequent column positions for that row shift.</li>
<li>All rows do not fit on page. The last two rows flow onto a new page, then there seems to be a page break.</li>
<li>On some reports dates are displayed as ######.</li>
<li>On some reports column headings are not centered.</li>
<li>I would appreciate any input that would help us determine a fix for the formatting issues we are encountering.</li>
</ol>
The report is executed using CrystalDecisions.CrystalReports.Engine.
Here is the code from the application that does the export:
                            ExportOptions exportOptions = new ExportOptions();
                            exportOptions.ExportFormatType = ExportFormatType.Excel;
                            exportOptions.ExportDestinationType = ExportDestinationType.DiskFile;
                            DiskFileDestinationOptions diskOptions = new DiskFileDestinationOptions();
                            diskOptions.DiskFileName = filename + ".xls";;
                            exportOptions.ExportDestinationOptions = diskOptions;
                            ExcelFormatOptions XLOptions = new ExcelFormatOptions();
                            XLOptions.ExportPageBreaksForEachPage = true;
                            XLOptions.ExportPageHeadersAndFooters = ExportPageAreaKind.OnEachPage;
                            exportOptions.ExportFormatOptions = XLOptions;
                            rptDoc.Export(exportOptions);
Please note the following details about our environment:
<h5>Report Designers:</h5>CR Designer version: xi Rel 2
<h5>Developer environment</h5>Has the following installed:
- Business Objects Enterprise XI Release 2
- VS .Net 2008
- Crystal reports Basic for Visual Studio 2008
- Crystal Report 2008 Runtime SP3
- Boxi .Net SDK
- SAP BusinessObjects Enterprise XI 3.1 Client Tools sp3
- .Net Version: 2.0
<h5>Crystal Server environment:</h5>Two clustered Business Objects Enterprise servers with the following installed & configured
- Business Objects Enterprise XI Release 2
- Crystal Reports XI Release 2
- SAP BusinessObjects Enterprise XI 3.1 SP3
- .Net Version: 2.0
<h5>Web Servers:</h5>Two load balanced web servers with the following installed and configured
- Business Objects Enterprise XI Release 2
- Crystal Report 2008 Runtime SP3
- Crystal Reports XI Release 2 .Net 2005 Server
- SAP BusinessObjects Enterprise XI 3.1 SP3
- .Net Version: 2.0

Umm, the code you provided has nothing to do with Business Objects Enterprise...(?). So, I'm a bit confused by the mention of BOE and "The report is executed using CrystalDecisions.CrystalReports.Engine" in essentially one paragraph.
Can you pls explain?
- Ludek

Converting files to PDF causing formatting issues.

Hello.
I am experiencing issues with converting an Excel file to a PDF and retaining its format. The first page converts fine, no formatting issue.But every page after that is shrinking the font and making the images smaller. This employee has tried to save the Excel file as a PDF and tried printing it through the Adobe print driver, but both are producing the same issue.
The troubleshooting steps I have taken to try to resolve this issue are below.
reinstall Adobe Acrobat
tried modifying the margins
tried a different machine
Cleaned the Temp folder
Any suggestions on a fix for this?

Hi Bill.
Thank you for the response. I tested what you have suggested and this did not work. When Adobe PDF printer is selected, it looks fine in the print preview, but once the Excel sheet has been processed, the format is not correct. I tested this also with printing a hard copy to a printer, still the formatting looks fine in the print preview. Once the file has been printed, it is not formatted the same. I have also removed the Adobe Driver and installed it again. Still doesn't work.
Any suggestions?

4 TB WD Re HDD formatting Issue

Similar Messages

Maybe you are looking for