4 week old Iphone shut down and wont charge or work in any fashion.

My new iphone  (4 weeks old) shut down today and will not work in any fashion. Will not charge, is not recognized by computer when plugged into the usb port. It is an expensive paper weight. I have looked at the apple website and tried all their trouble shooting suggestions.

try the force restore option, its perfect for your situation
try force restore in the following way
1) make sure the phone is off
2) Open iTunes on your computer
3) press the home button and keep pressing it and at the same time connect the handset

Similar Messages

  • My screensaver seems to be freezing and I can't access Safari. I've tried restarting/shutting down and that doesn't work. Any ideas to help?

    My screensaver seems to be freezing and I can't access Safari. I've tried restarting/shutting down and that doesn't work. Any ideas to help?

    Which OS X is installed on your Mac ?
    Click the Apple () menu top left in your screen. From the drop down menu click About This Mac. The version is noted there.
    Troubleshooting advice can depend on that information.

  • Iphone shut down and wont turn back on. Help me!!!

    iphone 4 shut down and wont let me turn back on. Help me!!!

    Reset, hold down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.

  • My iphone shuts down and wont turn back on. any help please

    my iphone shuts down by itself and wont turn back on, what should i do?

    If you didn't see anything at all your phone has defective hardware. Connect to the charger again, and while connected hold both buttons. If the phone comes back on, but goes off when you disconnect the charger, you have a bad battery. If it doesn't come on at all you have a hardware failure of the phone. If you see any instructions on the screen, such as an image of a phone connecting to iTunes, follow them; your phone may need to be restored.

  • My ipod, shut down and wont charge, and is completely unresponsive, its only a 5th gen with no damage or anything wrong with it.

    i was using my ipod earlier today, had it running via auxilary cable to my work radio, and it was working just fine, and when i pulled the cable out, it shut off, and became unresponsive, i tried charging it with multiple different chargers, from cars, to computers and the wall outlets aswell, nothing works. and nothing has ever gone wrong with it, is there anything that can be done?

    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    Error 1600, 1601, 1602
    Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.

  • My phone was fully charged and suddenly shut down and wont turn back on  iPhone 4

    my phone was fully charged and suddenly shut down and wont turn back on
    iPhone 4

    Hi there,
    I would recommend taking a look at the troubleshooting steps for unexpected power off issues found in the article below. 
    iPhone: Hardware troubleshooting
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Issue not resolved
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    -Griff W.

  • HT4623 my iphone just shut down and wont come back on

    my iphone just shut down and wont come back on what could be the problem

    Connect iPhone to Wall Charger for 10 minutes, it my turn ON itself. If still OFF, then keep on charger and Reset, hold both home and power buttons until the iPhone begins to start, this can take about 20 seconds time holding both buttons while on charger.

  • HT1349 my iphone went dead and wont charge at all, please help :(

    my iphone went dead and wont charge. I tried plugging it on the wall and via the usb to my laptop but still no luck. any suggestions on how to make it work?

    Try using a differnt USB cord.   Or hold down the power/home button together for 10 to 15 sec or until you see the apple logo and then release, wait for your phone to boot back up.

  • TS1538 my iphone shut down and will not turn on.  how do i get it to turn on?

    my iphone shut down and will not turn on.  how do i get it to turn on?

    Connect iPhone to Wall Charger for 10 minutes it may turn ON itself. If still OFF, keep on charger and Reset, hold both home and power buttons for about 20 seconds until the iPhone begins to start.

  • Firefox will not open on my computer the majority of the time. If I shut down and restart it will work sometimes, but not always. This started recently in the last two weeks. Today is June 12th 2011.

    Firefox will not open on my computer the majority of the time. If I shut down and restart it will work sometimes, but not always. This started recently in the last two weeks. Today is June 12th 2011.

    See:
    * http://kb.mozillazine.org/Browser_will_not_start_up

  • HT1349 my mothers iPhone shut down and didn't turn back on and it was not dead

    my mothers iPhone shut down and didn't turn back on and it was not dead

    See https://discussions.apple.com/docs/DOC-3763.

  • My iPhone shut down and factory reset itself for no reason, and now when I plug it into my computer or any power source, the apple shines but it doesn't get any further than that. How can I fix it?

    My iPhone shut down and factory reset itself for no reason, and now when I plug it into my computer or any power source, the apple shines but it doesn't get any further than that. How can I fix it?

    Try Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    Be sure to Follow ALL the Steps...
    But... if the Device has been Modified... this will Not necessarily work.

  • HT1766 After I click the button updates in my iphone, my iphone get started but after that iphone shut down and could not be open. Please advise .

    After I click the button updates in my iphone, my iphone get started but after that iphone shut down and could not be open. Please advise .

    Hello Wilson@w,
    The article linked below details the process of placing your device in recovery mode in order to complete the update.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Cheers,
    Allen

  • HT201210 I was in the middle of installing the new update using the wifi at a local restaurant when I lost the wifi signal and my iPhone shut down, and now I can't get into the phone. I only get the iTunes logo with the cable pic. What are my options now?

    I was in the middle of installing the new update using the wifi at a local restaurant when I lost the wifi signal and my iPhone shut down, and now I can't get into the phone. I only get the iTunes logo with the cable pic. What are my options now?

    Your only option is to connect your iPhone to your computer via USB (as the diagram indicates) and restore using iTunes.

  • My iphone shut down and won't start up

    my iphone shut down and won't start up.  HELP!

    Try #2 and #3 in link below. If neither work, you most likely have a hardware issue.
    Basic troubleshooting steps  
    17" 2.2GHz i7 Quad-Core MacBook Pro  8G RAM  750G HD + OCZ Vertex 3 SSD Boot HD 
    Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
     In Memory of Steve Jobs 

Maybe you are looking for

  • While installing sap netweaver pi 7.3 error occurred

    Hi, Experts. Hope all are doing good !!!!!!!!! Please help me how to solve below mentioned error.....  while installing sap nw pi 7.3 error occurred..... Here is the log file TRACE      2014-06-23 10:43:31.276 [synxcchapp.cpp:653]            CSyChild

  • [Solved] Unable to boot Arch off SUSE GrUB

    Hi, I have several OS installed on my machine. I used to boot everything including Arch but BSD, Solaris & PCBSD with GrUB2 off UbuntuStudio. Earlier today I installed SUSE GrUB on sda and now I am unable to boot Arch. I've used SUSE GrUB earlier and

  • Multiple writers for a field

    I get an error indicating that i have multiple writers for a field table_a.item_key. I have 3 classes that use this field as shown below. @Entity @Inheritance(strategy=InheritanceType.SINGLE_TABLE) ... @Table(name="table_a") @DiscriminatorColumn(name

  • Buying an E72 with Scandinavian keyboard outside o...

    For some reason it seems to be impossible to buy an E72 with Scand. keyboard from outside of Finland. I am living in Italy and my employer wants to buy me a phone. Fine. I tell them to buy E72 with the above simple specs. But, no one provides such a

  • Insert in table jdevelopper 11g

    hi ,i have a probleme with my application based on adf business component ,i create a page to insert a data ,it works correctly but after 3 day it stoped to insert ,when i try to insert it juste update the furst row , can you help me please