4.x dropdown menus are FUBAR
Since the 4.x "upgrade" all dropdown menus and predictive popups go invisible a second after appearing. They are still there, just invisible. If you move you mouse pieces of it reappear but you have to make your choice real fast or just guess.
3.x was flawless. I was very happy with it and would like to go back to it. Is there any specific reversion path from 4.x back to 3.x? Or do I have to uninstall 4.x then install 3.x?
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
Similar Messages
-
After use and not even long use dropdown menus are blank, Firefox won't close.
For a couple of weeks after a short time of use dropdown menus are blank almost as if they have been lifted off the screen but I can see an imprint of where they should be.. Sometimes running the cursor over them seems to make them appear but not often.
When this happens I cannot close Firefox.
== This happened ==
Every time Firefox opened
== a couple of weeks agoFrom your description, it seems that an add-on may me causing your issue. Follow the steps at [[Troubleshooting extensions and themes]] to test whether your extensions are causing this behavior. Reply back here with the results and with the name(s) of any extensions you have enabled.
-
Dropdown menus are not visible
if i click on any item in the menu bar all i see is a partial outline of the drop down menu. any ideas? thank you.
tomStart Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]] -
Muse dropdown menus won't "hide" in design phase
Suddenly (since downloading v3.0), when I'm in design mode, ALL of my dropdown menus are showing. Before, they'd do that every time I made a change to the menu, but I could go onto my master page and click a menu item that DIDN'T have a dropdown and they'd go away so that I could design without having them "in my face." But now, they're just there and I can't seem to get rid of them. Anyone else having this problem? Is there something I can do to hide the dropdowns while I'm designing?
Yes. That and more.
I want the top menus to be horizontal, when I scroll over them, I want the sub menu to scroll down horizontally if there are more than one sub menu, it won’t do that.
All sub menus should drop down under the top menus so you can see three of them if there are there, four or five.
Currently if I have a top menu of five items each one has say three submenus under each top menu, when I scroll over the top menu the sub menu roll out horizontally and the other two don’t show up until I actually scroll over the one submenu then the other submenu pops out one at a time.
On top of all this the original post says menus won’t hide in design phase, making it all that much more frustrating.
For goodness sake “it it ain’t broke don’t fix it!” Don’t assume that if something is obvious to one person is obvious to everyone else. -
Bootstrap 3 dropdown menus not working
Two of my Websites designed with Twitter Bootstrap dropdown menus are not working using Firefox 27. The Website work fine in Chrome and Safari.
The websites are www.torahrx.com and www.torahpractic.org
-
Kind of a weird question; I know. I'm new to both the Adobe Developer forums, and to XMP in general.
Here's the basic gist of what I'm trying to do:
We've got a Group, Category, and Subcategory structure for a given variable. Obviously, the subcategories are unique to a particular category, just as the categories are unique to a particular group; so displayed as a tree:
I. Group_1
1. Category_1A
a. Subcategory_1Ax
b. Subcategory_1Ay
c. Subcategory_1Az
2. Category_1B
a. Subcategory_1Bx
b. Subcategory_1By
c. Subcategory_1Bz
3. Category_1C
a. Subcategory_1Cx
b. Subcategory_1Cy
c. Subcategory_1Cz
II. Group_2
1. Category_2A
a. Subcategory_2Ax
b. Subcategory_2Ay
c. Subcategory_2Az
2. Category_2B
a. Subcategory_2Bx
b. Subcategory_2By
c. Subcategory_2Bz
3. Category_2C
a. Subcategory_2Cx
b. Subcategory_2Cy
c. Subcategory_2Cz
The subcategories are unique to their categories; just as the categories are unique to their groups. In an effort to prevent garbage coming into the metadata, and because these groups, categories, and subcategories have already been defined, I'd like them displayed as dropdown menus; Once the user has selected a group for the file, the Category dropdown would appear (or become active) and display the Category choices available only to that group, and then do the same in terms of the Subcategory.
I'm guessing that I'll start with a closed choice, assign the values to the groups, and then write a function to display only the choices for that group in the category dropdown. Trouble is, I don't have a whole lot of JavaScript experience -- and the word I've seen tossed around in this area seems to be an Array -- so I'm wondering if I'm barking up the wrong tree. If anyone has some kind of direction to point me in, it'd be helpful.
I'm not looking for someone to do my work for me (that's missing the point) -- this is an exercise in learning XML, Some scripting, Flash Builder, and Javascript, and I'd really like to develop it entirely myself; because I am having fun!!
Many thanks,
.themummDo you mean the stuff from here:
http://projects.nateweiss.com/nwdc/workcode.htm
If so, to be honest, don't ("use it", I mean).
It might have been a reasonable approach to this sort of thing ten years ago, but it's not a very good way of doing this sort of thing these days.
This sort of thing is pretty easy to knock together with some HTML, JQuery to do some JS stuff and a CFC behind the scenes.
Indeed just using some binds to <cfselect> tags would be a better approach.
Adam -
Frozen selections: I'm working from my Intel iMac trying to print (from both Aperture and Photoshop CS5) to my new Epson 4900 printer. When the Print menu comes up, under the "Basic" section of the "Printer Settings" the dropdown menus for both "Page Setup" and "Media Type" won't activate. All other options and selections work fine. Just these 2 are not functioning. What's up with that??
Here we are 15 months later and Microsoft Excel 2013 has the SAME ERROR
If one chooses:
Print Preview
Page Setup
Sheet
Then the print area and print titles (Rows to repeat at top, columns to repeat at top)
are all grayed out and cannot be selected.
If, however, I choose the
page layout bar and click print titles then
everything works fine.
Thanks for the solution!!! -
Horizontal Spry Menus are not showing up in ANY browser HELP!
www.tvnewsjunkie.com
I am a novice web designer and I need help!
The above site listed is the site I am currently working on. As you can see the menu bar...is not a menu bar at all but a long list of links along the left side.
HOWEVER, when I click on LIVE VIEW in DreamWeaver everything looks fine.
There should be 7 total menu bars with 7 Dropdown menu options each (except on the bottom menu bar which there will only be 4 I believe)
What am I doing wrong??Thank you so much for your help!This matter is certainly closed.
I just want to add, however, that somehow my Spry Assets folder was placed somewhere outside of the rest of my files! no wonder I was confused.
Thank you again!
Grant
Date: Fri, 17 Dec 2010 23:43:25 -0700
From: [email protected]
To: [email protected]
Subject: Horizontal Spry Menus are not showing up in ANY browser HELP!
You have forgotten to upload the support files - SpryMenuBar.js and SpryMenuBarHorizontal.css - to the server.
Gramps
> -
Office 365: dropdown menus don't stay open + theme problem
Hello
I recently encountered some problems that make the Office 365 unusable. Could you help me figure it out?
Problems:
These problems appear in every office program: word, excel, power point...
Windows are in some very old 98 looking theme
Office programs appear to be in a window within a window (Image 2)
Dropdown menus in ribbon and in settings stay open less than a second - makes them unusable
Situation:
Office worked well for 2 months, then problems started
Graphic drivers are up to date
Windows is up to date
All the other programs work normally
No recent hardware changes
Comodo Internet Security installed recently
Automatic updates enabled for pretty much everything
When reinstalling, even the installation windows goes to 98 theme
My actions:
Selected default theme from control panel, no effect
Restarted, no effect
Reinstalled Office (Image 1), no effect
Disabled Comodo Internet Security, no effect
Tried running in safe mode, no effect
My setup:
Acer R7-572
Windows 8.1 Pro N
Office 365
I would post some screenshots, but seems that it is not allowed for me.
Any help is appreciated.Hi,
Seems you've already tried lots of steps, including a complete reinstallation of Office, but to no avail. As per your description above, I'm thinking it might be something on Windows side that is interfering with Office product.
Have you ever tried to disable the hardware graphics acceleration in Office? Sometimes a recent updated video driver might be incompatible with Office. Please have a try and see if it helps:
Open any Office 2013 component, for example Word 2013, then go to FILE>Options>Advanced
Tick the option of "Disable hardware graphics acceleration" under the section
Display
If issue persists after the steps above, I would suggest we try to perform a clean boot in Windows and then verify result. This will help to determine whether any program conflict is causing the issue:
http://support.microsoft.com/kb/929135
Hope this helps.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
''''''i installed the new firefox and now its got a weird graphic glitch. i run windows 7 starter on my netbook and it seems as if the main window got two layers, the windows style and the new firefox style on top. the problem is, beside that some buttons dont really work, that the drop down menus are not really readable and the highlighting in the dropdown menus stays after going thought them.
greetsStart Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
Try to disable hardware acceleration.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
If disabling hardware acceleration works then check if there is an update available for your graphics display driver. -
Safari is slowly getting more buggy. Actions, such as clicking on a field, don't give the expected results. I may have to click on the red exit button 5 times to get it to work. I get unwanted dropdown menus. I have version 5.1.7 on OS 10.6.8. System is 3 years old.
Are you running low on RAM..?
see > Using Activity Monitor
Is your Hard Drive getting full...?
see > Freeing space on your Mac OS X startup disk
Have you tried Repair Disk Permissions after upgrading Safari...?
see > About Disk Utility's Repair Disk Permissions feature
Reset Safari...? -
How to insert dropdown menus since Spry menus have been removed? [was: hi]
Hello. You've done a very problem thing by deleting a drop menus from Dreamweaver. Now I just have a not suitable plugins or must to pay for a using..If I was a very important customer, would require the immediate to return the spry assets.
Spry menus are terrible. You should not use them. That's why Adobe abandoned them in 2012. There's no chance of them coming back. Below are some free alternatives you can use.
Pure CSS Drop-Menu
http://jsfiddle.net/NancyO/zN7fU/
CSS3 animated dropdown menu
Responsive Hybrid
http://www.dynamicdrive.com/dynamicindex1/responsivehybridmenu/index.html
jQuery Superfish
http://users.tpg.com.au/j_birch/plugins/superfish/
JQuery UI Menu
http://jqueryui.com/menu/
Nancy O. -
MenuBar (AS2) component without dropdown menus?
I have used the menubar component several times to make
dropdown menus from
the main bar .. but I need to make a menubar on a Flash
header that won't
have any dropdowns .. just the seven links across the bar.
I can't find a way to make this work .. and I can't find any
information on
using the MenuBar component without having dropdowns that are
the links.
Is this even possible?
Thanks,
NancyThanks. If you do post elsewhere, please copy and paste the
link here, so that others (myself included) can keep an eye on it.
BTW, I was pretty time-crunched last week or so when I
originally posted this, so I used Flash as a fallback. At least
there I know how to position with pixel-perfect accuracy, and
nothing psychotic happens with the behavior. Well, almost nothing.
Flash will always have its own charming "quirks" and "undocumented
features", but at least I can contend with those, for now...
It's a bummer, too, because I was really excited to get this
project done entirely with CSS. -
Dropdown menus not working in Firefox
I created a web page in Dreamweaver MX, I converted it to
XHTML, the dropdown menus work fine in IE, but no longer in
Firefox.
http://www.xalexweb.com/sm/candidate1.html
HELP!!I was referring to the second page in my above post.
I disabled JavaScript as a test after loading the page with JavaScript enabled and that worked.<br />
I also get the selects to open if I right-click instead of left-click the select.<br />
That way the select get selected (shows a focus ring) and after that left-clicking works as well .
This assumes that JavaScript is monitoring the left-click, but that script no longer works properly.
A good place to ask advice about web development is at the MozillaZine "Web Development/Standards Evangelism" forum.
*http://forums.mozillazine.org/viewforum.php?f=25
The helpers at that forum are more knowledgeable about web development issues.<br>
You need to register at the MozillaZine forum site in order to post at that forum. -
The UI text of the menus are not readable so it's impossible to work with
Hi
I install the photoshop cs6(x64) and i have the following problem. The UI text of the menus(not the toolbar drop down menus) are not readable so it's impossible to work with. After that, I completely uninstall the cs6 photoshop and i tried to install photoshop cc(x64)-with clean install- but the problem still exist.
Also I tried to change display settings from 1600x900(recommened)but the problem still exist...I send you some photos of the menus to understand better what I mean.Any suggestions? Specifications
Toshiba Satellite L775-15NWin 7 Home Premium SP1 x64
Intel Core i5-2430M 2.4GHz
Ram 8gb
Monitor 17"
Geforce GT 525MRight click on your desktop and choose Properties, then choose Window Color, Advanced Appearance settings...
Click on the Message Text to look at your Message Box item settings. Is the font Segoe UI, 9 point, color black?
Also, in Photoshop, check your Edit - Preferences - Interface menu. What is your UI Font Size there? Try changing it to something else, closing and restarting Photoshop, then changing it back.
Lastly, you could try resetting your Photoshop preferences to defaults. Press and hold Command - Shift - Option simultaneously (or Control - Shift - Alt if on a PC) immediately upon cold-starting Photoshop. If you get the keys down quickly enough - and you have to be really quick - it will prompt you to confirm deletion of your current preferences, which will lead to the establishment of a fresh default set. If it does not prompt you, you haven't been quick enough to get the keys down.
-Noel
Maybe you are looking for
-
Oracle BPM 11g Workspace - Load Management Among Users
Hi, We are using version Oracle BPM 11g - 11.1.1.5 Feature Pack. Kindly throw light how to distribute work among users in a group. This can be achieved using group rules in BPM workspace. 1. Logged in as weblogic in bpm workspace. 2. Go to Preference
-
Replace colour doesn't work.
Hello board, I have a B&W image in my PS2 (black car, white background) but when I click on image > adjustments > replace colour, on the background for example, it just goes gray...not the nice blue I want. Huh? This worked before with other images s
-
Depreciation of a single asset (AFAB)
Hi Sap Gurus How can one run a single asset with transaction AFAB. I just want to a depreciation run for one asset. The system is telling that with this transaction I can only run depreciation for all assets. Alternatively only in a repeat run ca
-
Workflow for HDR or other multi-image editing in PS
A client asked us to shoot some interiors at a country club clubhouse. With bright windows looking out over the golf course and the relatively darker interior, it was a natural for HDR. The question became how to actually do it. Since HDR seems to wo
-
I have already restarted my computer 3 times! I have class next week any help would be appreciated!!! My serial number is accurate, all I did was buy a new computer: Mac OS X 10.9.4