40.52 Detonator BETA Drivers

Just thought i'd inform u all of the release
there are 9x/ME/XP/2000 available from
my http://FTP://MSIForum:[email protected]
or
http://www.3dchipset.com

I installed the 40.52 driver on 23 Sep 02. I am getting some very good performance with my games and applications. So far, no problems to report.
3D Mark 2001SE
Detonator 40.41 10219 stable, no problems
Detonator 40.52 10210 stable, no problems
MSI 30.00 9535 unstable, frequent
application crashes
XP1800, no o/c
Asus A7V266
27 GB Quantum Fireball HDD
512 MB DDR
MSI GF4 4600, no o/c
SB Live
Win2K Pro

Similar Messages

Live! Cam Voice BETA Drivers and Widows Vista

I have just installed the BETA drivers for Live! Cam Voice and everything seems to have worked except that there appears to be a conflict with Microsoft Genuine Advantage and I am told that "There is a problem with your licence so notifications will no longer appear". The Error is 0xC004D40 described as "The security processor reported a system file mismatch error. I am asked to validate the product online. Validation takes me to Micorosft Genuine Advantage (a misnomer if ever there was one) where I am told that the "copy of Windows did not pass genuine validation. Either an unauthorised change was made to Windows files or a software preogram installed on this computer is not currently compatible with Windows Vista". That would not matter too much if as a by-product. I had not been prevented from updating my installation of Windows Vista, but I was and the only way round that was to start my computer with no programs running and update in such almost clean state. Thus I counsel everyone seeking to use the BETA drivers for Live! Cam Voice to be aware of the problems that they might encounter.

HELLO CREATIVE!!!
CAN YOU MAKE THIS CAMERA USEFUL?
NEED NEW DRIVER!

Beta drivers for Audigy2

Well, the title says what I'm looking for, but here's my problem:
I had installed Quake4, and was playing fine. After I had finished the game, I went to update my drivers (finally,) and noticed that I was running my NX on generic windows drivers. I updated all the drivers, mediasource, etc... (along with some other housekeeping updates,) and I now can no longer open the game.
I've already eliminated the video card update as the problem, and I honestly don't know of a way to eliminate a bios update issue, however, I HIGHLY doubt that is the culprit. After some discussions in the quake disc. boards, I sence that there is a problem with the creative drivers. I have been told that most people are getting success by using the latest beta drivers, and I was linked to a file called "SBA2_PCDrvBeta_LB_2_08_0002.exe" However, when I try to run that file, I'm told that "Setup is unable to detect a supported device on your system..." As the title says Audigy2/ZS, Audigy 4, I'm thinking these are the wrong beta drivers for my device, but I can't find beta drivers for the Audigy2 NX USB
Help? Thanks...

I have tried re-installing, that isn't working. I'm also hearing that people are having success when installing the OpenAL libs....
I've been trying to get this file: http://developer.creative.com/articl...&top=38&aid=46 however, whenever I try to d/l the file I time-out to a "page unavail." error... Is there some server error at creative? ...or, does anyone know of a mirror server?
The file I'm looking for is: OpenALwEAX.exe
Message Edited by Toker on -02-2005 0:45 PM

2.08.0002 Beta Drivers will not install on Audigy 2 Platinum

I am attempting to install the new beta drivers (SBA2_PCDrvBeta_LB_2_08_0002.exe) to gain OpenAL support and better Battlefield 2 performance but I have not been able to. Upon installing the drivers, the system will freeze. I have left it for over an hour, and it remains frozen. On occasion, the installation would work, but then would freeze after I log in again after the reboot. Only way to recover is to reboot in safemode and remove the drivers.
I have tried removing the old drivers entirely (and cleaned the system with Driver Cleaner Pro). I have also tried extracting the driver set and letting windows do the installation, and I have also tried running the secondary setup.exe installer in the driver directory. I also tried changing my video driver, in case that was causing a conflict. Each installtion instance began with all of the Creative-related drivers cleaned by Driver Cleaner Pro.
I checked my msinfo32 and there are no IRQ conflicts or sharing related to the Audigy 2. Overall, I think I have attempted this installation about 5 times.

*bump*
Any ideas guys?

2012 iMac with gtx680mx want beta drivers?

I just got my new iMac i7 with the gtx680mx video card. I know there is beta drivers out for he card that improve it a little bit. Where can I download them. Thx a lot

On OS X, Apple provides the driver updates and drivers are updated with OS X updates, so you can't install any beta driver for OS X.
However, NVIDIA releases beta drivers for their graphics on Windows, but not OS X

Triple Monitor on T500 with RC and beta drivers...

Hello all I was running a beta driver from the beta Lenovo website and was able to run triple monitors.
Now with the RTM I cannot...
I was hoping that someone might have the old version of the beta drivers that Lenovo had on the beta site last year aroung May/June...
This was running without any extra hardware, it allowed windows to "see" both display drivers and allow them to be used.
If someone want I can send you a pic as proof, but could you please send me the old drivers for the "switchable graphics" ( I think that was the thing.)
This is a laptop T500 w the ATI 3650 HD and the intel express graphics card built in.
Thanks in advance.

What display are you using? Are you using a direct HDMI connection or are you using an adapter?

How to uninstall beta drivers for xfi xtreme mu

Hi everybody (xcuse my bad english)?Like many people who have crackling pb with the xfi xtreme, i've installed the beta drivers. But in 2 days, these drivers will be out of date. And i don't know how to uninstall them, i cannot find any creative drivers when i go into the set up programcan u help me please?

Hello LA,
The window that I have is different from the one you posted. Please see attached for mine. When I clicked on REMOVE, a message popped up and disappeared within a couple seconds. And the message is as following: "The installer is verifying the installation, please do not reboot while this dialog is being display." This same message popped up every time REMOVE is clicked but I have no luck on removing MAX.
This test PC is for legacy testing and it was with Windows 98 and have an ISA DAQ card installed that requires DAQ driver 6.9.3. Can upgrading the test PC to Windows 2000 corrupt the installation?
Looking forward for your advice. Thank you.
Valen
Attachments:
Add Remove Programs.doc ‏57 KB

Hey CL, Audigy 2ZS need beta drivers/Crackling problem fixed t

:angry: Owners of Audigy 2ZS need beta driver and or fix for the crackling and popping audio problems to. My system is: ASUS A8V with latest official BIOS, ATI x850 Pro, WD SATA 250GHD, AMD A64 3700, 2x52 twinx Corsair matched memory, Antech true power 2.0, 500 Watts. I have all the latest drivers and I am running XP pro SP2. I to have the bad audio when playing games such as BF2, COD2 and UT2004. I also have bad audio when playing music through WINAMP and surfing the internet. I have no IRQ conflicts and have the beta drivers for the Audigy installed. I can reduce/eliminate the amount of popping/crackling by going into my BIOS, then save and exit.Message Edited by Dirty_Harry on 06-07-2006 09:55 AM

No it does not, as long as you do as follows: (Instructions are copied over from my previous posts on the subject)
How to manually change the Windows HAL:
Use the following command: "expand d:\i386\halacpi.dl_ c:\windows\system32\hal.dll"
Whereas: d: is your CD-ROM letter, or where you Windows XP Installation resides.
halacpi.dl_ can be any of the following depending on what you want to install:
"Standard PC", Non-ACPI PIC HAL (Hal.dll)</LI>
"MPS Uniprocessor PC", Non-ACPI APIC UP HAL (Halapic.dl_)</LI>
"MPS Multiprocessor PC", Non-ACPI APIC MP HAL (Halm
ps.
dl_)</LI>
"Advanced Configuration and Power Interface (ACPI) PC", ACPI PIC HAL (Halacpi.dl_)</LI>
"ACPI Uniprocessor PC", ACPI APIC UP HAL (Halaacpi.dl_)</LI>
"ACPI Multiprocessor PC", ACPI APIC MP HAL (Halmacpi.dl_)
</LI>
Offcourse, the HAL you should change to is Standard PC. You will lose Dual Core or HT support in the process, but I strongly believe it can help. As per above, you can switch back to your previous HAL without reinstalling. You will be most prolably asked for the drivers of your devices, but on my setup, it didn't, as they were already stored in Windows' System Folders.

Xfi beta drivers no way of recording in vi

i had to install and remove about 3 times before i got x fi software and THE NEW beta drivers working (i thought)..so now i get to the most important element i needed and the recording source stays shaded and the actual record button gets a message AFTER I APPLY IT--"can not record" / or "cannot use this application"?anyone know how to get the sources up and /or how to get a recoding via the internet or even by input into card??THIS IS SO FRUSTRATING?PLEASE HELP?thx?ap

No, can't be done.

New Audigy Beta Drivers did they add EAX 4.0 to an Audigy 1 Platinum

Hello,
does the new Audigy Beta Drivers add EAX 4.0 Support to an Audigy Platinum ?
Greetings Picard007

Audigy (hardware base one) supports EAX3 (EAX Advanced HD) hardware. Audigy2 suports EAX4 hardware. EAX4 is supported with latest OpenAL drivers on compatible hardware.
More: http://en.wikipedia.org/wiki/Environ...dio_extensions
Quote:
EAX has nothing to do with actual 3D audio positioning. Positioning is done by Microsoft's DirectSound3D API. An alternati've to DirectSound3D, called Open Audio Library (OpenAL), surfaced in 2003 in several titles. OpenAL allows direct hardware acceleration of audio, like DirectSound, including EAX. As of 2006, the API has been used in many popular titles including Doom 3 and Prey. These games support EAX 4.0 if audio hardware with an OpenAL-supporting driver is present.
Most releases of EAX versions coincide with increases in the number of simultaneous voices processible in hardware by the audio processor: the original EAX .0 supports 8 voices, EAX 2.0 allows 32 (Li've!), EAX Advanced HD (EAX 3.0) supports 64 (Audigy), EAX 4.0 again supports 64 (Audigy 2), and EAX 5.0 allows 28 voices (and up to 4 effects applied to each) (X-Fi).
Message Edited by SoNic2367 on 0-07-2006 02:0 PM

WTF Creative fix winXP x64 driver new beta drivers still have the 4GB memory limit is

SBAX_PCDRVBETA_US_2_8_000.exe
I just pop in my audigy 2 ZS to see if beta drivers released June 8 fixed the no 5. issue with pass drivers unless u had no more then 4GB or limited the OS to 4GB using boot.ini
*no sound from my center and rear speakers
"the Known Issues:
* When using 5. Speaker configuration, no audio output from the Center/Rear channels.
?? To restore audio output in Windows XP: Launch Play Control Panel, click the Speaker Volume button, then click the Restore Defaults button."? (did not work no matter how many times i tried it's + also did numeros reboots)
doesn't work ? only after adding /MAXMEM=4096 did everything start working like it should.
my computer has 8GB of ram and by using this fix the other 4GB go to waste why is this issue fixed on Vista x64 drivers but NOT on XP x64
come on Creative WTF?:angry:
so creative nothing was fixed for WinXP x64 with this beta driver !!!!!!!!!!!
Message Edited by ATT-Half on 06-25-2008 07:8 AM

Re the F8 trick: Thanks. Still very annoying, as it needs to be pressed and selected on every boot. Still, it's a workaround. Re "hey it's only beta" and "not signed on purpose", I will argue that not signing drivers puts an unneccessary installation hurdle before the user. Worse, it is not readily apparent how to circumvent that hurdle. That drastically reduces the number of users that will install and use the driver, and could thus give feedback on it. My assumption is that Creative have released the beta drivers publically to get a wide range of good feedback on their performance. Also, to give the most impacted users an alternative to just removing their Creative card and falling back to onboard sound. Both objectives are more easily achieved if the driver can be installed - and used - without needing to go through an F8 boot menu on every startup. The driver is already designated as beta and carries a prominent expiration date. Not signing the driver does not do anything to alert the user of the fact that this is a beta that the expiration date popup did not already do. Look to graphics cards. You will find beta drivers there, released mainly to relieve pressing issues in-between driver releases. Those drivers are signed, yet no one doubts that they are beta drivers, not least because they are released on a page that displays a very prominent BETA logo. Creative has goals in publically releasing beta drivers, which won't be met if users can't install the drivers.

Audigy 2 ZS beta drivers a step backwar

OK. My Audigy 2 ZS was working fine with the previous Beta drivers.
I was then forced to upgrade to the latest ones, and now Vista won't start up. It goes through the bootup process but instead of displaying the round Vista logo, it resets and goes back to the checking memory bit.
I have had to uninstall them via Safe-mode to get my OS to work.
While I'm not against upgrading to the latest drivers, Creative should at least allow the previous ones to work until rather than completely disabling them after a certain date.
I have logged the issue with Creative but just received the standard "we are too busy to respond individually" reply.
Has anyone else experienced this Vista problem or know of any workarounds?
Martin

Incase it helps ... specs for system follows:
3.2E skt-478 @ 4GHZ
Asus P4P800E Delexe
Corsair 4000 pro @ 490mhz Dualchannel,Liniar mode
Gigabyte 6600gt TFE @ 550mhz-core/.3ghz-ddr3 (yes its better than a 6800GT)
Audigy 2 ZS
2x WD 80GB SATA RAID0 60GB
2x WD 250GB SATA RAID2+0 500GB
40GB seagate IDE (Cacheing dri've)
gigabyte dvd-rw
dvd combo dri've
etc
etc
etc
Windows XP Pro Partition
Fedora Linux Core Rev.4 Partition
/w G.R.U.B boot control

HP Deskjet 3070a beta drivers for Windows8 x64

Good afternoon. Can you tell me, where I can download the beta drivers for the all-in-one HP Deskjet 3070a for Windows8 x64? The software from the disk can not be installed on Windows8, and scanning function does not work without software

Hey Velvetdust. Try using the Install Wizard that is posted in this thread:
How to Get Your Inkjet Printer Working with Windows 8 Consumer Preview
Best of luck!
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

New BETA drivers for TV@nywhere Master

there was a thread somewhere before where someone had found some updated BETA drivers for the MSI TV@nywhere Master card but it seems to have gone now
i've been using them for a while now, and they're very stable, and the picture quality has improved somewhat
they say they are for the Master version of the card, but i think they may work on the Mega PC version, the only difference is the Master has a AM/FM tuner as well
anyone having stability probs in media center III or MSIPVS might want to try them out and see what happens...
i've uploaded them to my webspace, and you can find them here in ZIP format: http://www.ukshazam.com/downloads/8606Master_drv.zip
please note these are BETA drivers and as such MSI won't support them (as if they do anyway
i'll also post this in the Mega PC forum

As I recall when this BETA driver started flying around the forum, they WERE NOT official or unofficial MSI drivers. They were modified by a user from another forum and someone from this forum posted a link to them. THESE ARE IN NO WAY RELATED TO MSI DIRECTLY!! Someone reversed engineered the driver and probly thru extensive testing, via trial and error, was able to clean up the driver to give the result that most have had with them. This doesn't mean that everyone is going to have the same result, which is and has been the reality with any add-on card produced since PC's came out...compatibility issues DO still exist out there and not all systems are going to play in the sandbox well with all add-on cards that are manufactured...something to keep in mind when purchasing new systems...
Furthermore, it's been my experience that proprietary systems (The Pac-10 as I call them...IBM, Dell, Gateway, HP, Compaq, Sony, eMachine, etc...) have more issues than White Box systems when it comes to add-on compatibility. If you don't know this already, most of these companies DO NOT want you to purchase off the shelf items from Best Buy, CompUSA, etc...they want you to have to come back to them for upgrades and add-on devices, at higher than retail prices, and that's where they make the most profit. Sad reality, but true. Case in point: My first retail purchased PC was a Dell XPS Pentium 100, (my prior PC's were purchased from Michael Dell's garage) I wanted to upgrade it to a 4X CDROM drive and Dell had failed to include the snap in side rails for their new innovative case that was tool-less. So I called up Dell support and asked if these rails were available. The CS Rep told me that they were so I asked how much. She asked me if I had bought the upgraded device from Dell and I said no. Then she informed me that they wouldn't sell them to me ($6.00 US) because I hadn't purchased the upgrade device from them. Needless to say I was pissed. This was circa 1995-96.
Anyway, over the years of doing network consulting, I can't tell you the countless times that I've heard this type of thing on the phone from many of the above listed companies...yes, most have gotten better over the years (Like Dell including all of the rails needed inside the case nowadays) but overall they still have the same mindset and it's much more subtle when they design a motherboard that won't play in the sandbox well with retail bought components...*shrugs*
I got tired of playing their game after a while and started building my own systems. I found White Box isn't always better either but for the most part it's been a far cry easier than buying proprietary...
Just my 2 cents here for what it's worth...

T440s: Best place to find beta drivers?

Hey Guys,
Having some Wi-Fi issues (see http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T440s-Wifi-unusable-5GHz-missing-AC/td-p/14... and wondering if there's a newer driver I can try.
Beta drivers are commonly distributed by support staff either on forums on by email - any ideas on the best way to find the latest Win 8.1 T440s Wi-Fi drivers for the Intel AC 7260?
PS - I know Intel has drivers but a/ they're older (?) and b/ I was under the impression manufacturer ones were better for laptops.
Best,
Ollie

Hey Andy,
There is just as large a collection of plugins for Logic (these come in the AU or Audio Units format) as for Cubase. Anywhere you can buy recording equipment should be selling plugins too. Some free plugins (but not very useful most of the time) can be found on places like www.digitalfishphones.com or www.airwindows.com . The guy that owns AirWindows seems to basically do code copies of plugins. He's got some great free plugins. . . one of which I often use on vocals. he also has some paid plugins that are far cheaper than the competition ($60 vs. $500 for a tape emulation plugin for instance) that are VERY good.
If you're looking to buy plugins, go to www.sweetwater.com . . . or really any large pro audio retailer, but sweetwater's a good place to start. If I knew more of what you were looking for I could help guide you a bit better.
Also, if you have an ilok key you can download demos of many paid plugins and give them a test drive.

40.52 Detonator BETA Drivers

Similar Messages

Maybe you are looking for