40 GB iPod Battery drains when mac is powered off

If I leave my iPod in the cradle ( connected via firewire) and the Mac is powered OFF, the battery will be drained in a few hours (or overnight). If I leave the iPod sitting wherever (not connected to anything), the battery will not be drained... normal.
I assume then that the Mac (G4 867) is sucking the juice out of the battery when the Mac is powered off. Is this a Firewire port issue or ?
I don't always leave my Mac on, and I don't always take the iPod out of its cradle... how can I stop this from happening?
G4 867   Mac OS X (10.3.9)   iPod Click 40GB

Is this a Firewire port issue or ?
I remember a few people mentioning this problem last year, and I think the consensus was that it's a Firewire port issue, and the only solution really is to take the iPod out of the dock when the computer is turned off. (It might work to have an external powered Firewire hub, I don't know if the computer would shut that down or not).

Similar Messages

  • Do any Samsung WP owners have their battery drain to dead while powered off?

    I've noticed my ATIV SE battery drains completely dead while powered off in just a couple days.  It has a nearly full charge when powered off and then when I go to power it on, it's dead.

    It started in September which was about 2 months after purchasing the phone.  It's a recurring issue.  Yes, in my example, the phone is completely powered off for the full two days.  More specifically, the trend is I turn my phone off for about 10 hours and when I turn it back on it's lost about 12-14% battery charge.  Since posting my question, I've sent it back to Samsung Support for repair (on the second go-around now).  They replace the battery (supposedly) the first time.  The issue was worse after that.  The battery would lose about 21% charge in just 12 hours of being powered off.  The current Samsung repair log states they've replaced the PBA, updated software, and further repair is pending a hardware part (unknown) replacement.

  • 10.5.6 Update breaks USB Keyboard causes iPod Battery Drain when sleeping.

    I just recently installed 10.5.6 via automatic updates. I normally connect my iPod touch to my iMac via the keyboard Left USB port. I put my computer asleep at night. When I wake up my iMac in the morning my iPod is totally drained of its power over night. When I placed the iMac asleep in the evening the iPod battery was full. It seems the update broke the USB ports on the keyboard. To test this theory I tested keyboard on all three ports on the iMac by moving my keyboard connection. The iPod touch drained connected to the keyboard on all three ports. If I place my iPod on the USB port by itself it does not happen. It only happens when it is connected to the keyboard.
    So far I have downloaded the full install of 10.5.6 and installed it. I also did the little voodoo of fixing permissions but still the same results. If I use the USB port on my keyboard my iPod will drain of all of its power in 6 to 8 hours when I place my computer a sleep. If I connect my iPod directly to USB port and put my computer asleep the iPod does not loose power and will be charged in the morning.
    Not only does the keyboard not charge the iPod when it sleeps it drains the power from the iPod.
    This did not happen before my update to 10.5.6.
    Does anyone have any ideas? Is this happening to anyone else?
    Thank you for your help.

    I opened a service call with Apple on this keyboard problem. I was shipped a new keyboard, reverted my computer to 10.5.5, went to the apple store to work with a Genius and worked with online support. Finally after weeks of going back and forth I received and answer from Apple Engineers. It seems the engineers “verified that the behavior for power handling has been changed” in 10.5.6. “resulting in the issue you've been reporting”. They also now “verified that the issue your reporting is correct behavior under this improved handling system”. They suggest to plug devices directly into the USB port when my iPod Touch is directly attached to my computer. I think I will just have to get a USB hub. It is a shame Apple had to waist money sending me a new keyboard. It is also a shame I had to revert my iMac to a 10.5.5 before the engineers took the time to look at the problem I was having. If the send level support engineers took the time to look into the problem the call could have been solved in 24 hours.

  • Help!!Battery drain while unit is powered off.HP Pavilion g6-1b39wm Notebook PC

    new motherboard that works great until i unplug it and power it off the battery light or power light on the right side next to the power connector stays solid when powerd completly off what can cause this issue?Also the battery is not showing up but charges fine.If someone could help me out it would be much appreciated thanks.

    Hello systems1969,
    You’re having a problem with the battery not working correctly on your laptop.
    Go into device manager and uninstall the battery and restart the computer.
    This will uninstall and reinstall the driver that controls the battery.
    Do a hard reset.
    Power off the computer.
    Remove the power cable and the battery.
    Hold down the power button for 15 sec while booth power sources are removed.
    This should reset the hardware in the computer.
    As you turn it back on tap the F10 key. This will load BIOS setup utility.
    Press F9 to load defaults.
    Press F10 to save and exit.
    The BIOS is what controls all hardware in the system. This will correct any changes that might have been made in BIOS.
    When the computer boots back up, check to see if everything is working.
    If everything is still not working correctly, go to HP.com and update the BIOS.
    Here is a link to the update.
    Also here is a link that will walk you through the steps to test and calibrate the battery.
    Clicking the White Kudos star on the left is a way to say Thanks!
    Let me know how everything goes.
    Have a good day.

  • ThinkPad E455 Excessive Battery Drains When Power Off

    I bought a new ThinkPad E455 two months ago with AMD processor and I use Windows 7 (64-bit) as my operating system. The problem is, since a week ago, when I turn off my laptop (completely shut-down, not hibernating nor sleeping), the battery looses 14% in less than 24 hours. This problem has never happened before. When I search for solution, apparently my problem is similar to https://forums.lenovo.com/t5/11e-Windows-E-and-Edge-series/E535-High-battery-drain-when-laptop-is-powered-off/ta-p/1249897 and https://forums.lenovo.com/t5/11e-Windows-E-and-Edge-series/E530-Battery-drains-and-power-manager-issue/ta-p/1249887 and https://forums.lenovo.com/t5/11e-Windows-E-and-Edge-series/E440-battery-drains-when-powered-off/m-p/1527086/highlight/true#M18743. It appears that the power drains happened in other type of ThinkPad as well. Moreover, it seems that this problem is not limited to ThinkPad series (e.g: http://www.tomsguide.com/answers/id-2324931/laptop-battery-drains-powered-shutdown.html), and more surprisingly, some of other brands experience this condition as well. My question is, what causes the power drain? I mean, the laptop just worked fine for a period of time (in my case it is two months), if it was trigerred by something, what is it? I looked for the technical updating BIOS solution in http://support.lenovo.com/us/en/documents/ht077068, but unfortunately the series E455 is not in the list. Of course, updating the BIOS using incompatible version is not recommended by the technical support. Please help me.

    sgegreen wrote:
    See https://en.wikipedia.org/wiki/Advanced_Configuration_and_Power_Interface When you think the laptop is powered off it's actually in ACPI Power State S5 with power being supplied to the power button and some of the USB sockets. So, when you shut down the laptop and then removed the power cord, if the BIOS version was lower than 1.13, the laptop was still draining the battery.I followed your suggestion, and it seems solving the problem, thank you. However, another problem arises just recently. When I was playing a game on my laptop, the battery capacity is decreasing when the AC power connected (as described by both lenovo and Windows battery gauge). I post this problem in https://forums.lenovo.com/t5/11e-Windows-E-and-Edge-series/ThinkPad-E455-Battery-Capacity-Reduced-When-Connected-to-AC/td-p/2106218. Oddly, the problem (seems) does not occur when I quit the game to windows. Why was this happen?

  • Lenovo notebook E540 Battery drains when it is not powered on

    Lenovo Notebook E540 battery drains when it is not powered on. My colleague said that there is a cloud connection being connected during power off and it consumes power. Is that possible? Any resolution?

    Hi Kingchechan,
    Welcome to Lenovo Community!
    As far as I know only the Windows update will be accessing to the server, or might be any other 3rd party cloud related application, which might be accessing to the cloud server.
    Did you check disabling USB always on in BIOS & Wake On Lan from Windows AND BIOS
    Check running command powercfg /devicequery wake_armed to see if any device is programmed to power on the laptop might be this is consuming battery power.
    Best regards,
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Battery Drain when not in use--Gen 6 Nano

    I have used Ipods for years now. Still have an Ipod Classic and a Shuffle that I use regularly. I have been pleased with the battery life, as a whole.
    Recently I purchased a Nano Touch--Gen 6. I really like the Ipod + Nike features.
    The issue I have is with the battery draining when the unit is not in use. If the unit has been fully charged, I will unplug from computer or wall charger and make sure that: 1)Music/radio is paused 2) Nike receiver is unplugged from Nano. 3) Screen is off.
    If I do not use the nano for an extended period of time, say around 12-18 hours, I notice that the battery has drained between 50%-75% even if nothing is playing or "on". Nothing should be draining the battery this far, in my opinion.
    I can't believe that this is typical. Do I have a bad battery?
    Your help would be appreciated.

    You are not alone. I have had my Nano for several weeks now and have noticed the same thing. I would use it for short trips in the car while I ran errands and find that after only technically using it for maybe an hour or so (over the course of several days), I would already be low on battery. I read the manual and you can only put the ipod in sleep mode. It stays on for 36 hours and only then will it actually turn all the way off. So technically the battery last for several days but that doesn't do you any good unless you are using it for long periods of time all at once. I'm really frustrated because I really like it other than the fact that I'm always having to charge it.

  • IPhone4 battery draining when not in use

    am just wondering if anyone experiencing battery draining when not in use? i charge my iphone4 before going to bed and woke up this morning to realise that my battery had drain 22% on stand by... is this normal? can anyone confirm it to me please, thank you

    Just an update guys --after draining (on standby) over 20% of my battery charge last week, it has risen to or about 40+% in the last couple of days. I haven't changed any settings or whatsoever. I had to charged it twice during the day yesterday and it was bloody frustrating. anyway, i went to the apple shop today and told them the problem... they scanned my iphone4's battery and it was evident and showed when was the last time it was charged and how much battery life has it lost throughout the day. After scanning my iphone we did not even have to discuss repair or do any setting or software checks. I was gobsmacked --as i did not have to ask for a replacement, I was immediately offered a swap to a brand new iPhone4... lucky me? umm, i don't know...maybe? But the thing is, they seemed to be aware of the problem and they are keeping a low profile on tackling the problem. so my suggestion is if anyone has a battery problem with their unit, take it to apple and have the battery scan. As such, i have to wait and see if this new unit will present the same problem, although i must admit, for some reason, this new unit has a slight different behaviour than my previous iphone4.
    Other issues on my previous iPhone4:
    1. frequently dropping signal --not a problem with the new replacement unit
    2. if i turn off my "phone" feature on the multitasking bar, red dot appears on the phone icon and i couldn't make a call as it seemed blocked and it kept asking me to set-up the voicemail feature every time --again, not a problem with the new unit.
    3. even my tomtom app has changed its behaviour, i have discovered new features without updating the app --strange isn't it?
    4. playing NOVA game was a pain with the previous unit as i kept getting network problem and interrupting the game.
    5. it kept shuffling my music when i'm using ipod whilst walking. imagine, hearing about 8 different tunes in a span of 5 seconds...
    anyway, time will tell with this new unit as i have kept the same settings from my previous unit and uploaded my previous back-up data and apps. so it would be like having my old iphone4 and we'll see in the morning if it will drain on stand by as well --i hope not 'cos am getting really frustrated with it. oh, by the way, blue tooth feature don't work with my new replacement unit --NICE!!!

  • Battery drains when power connected

    Hi,
    Early 2011 MBP 17inch battery drains when the power is connected. It seems to be that when the system is having some load battery is discharging even when the power is connected. Is this normal?
    Regards

    Yes it is normal, For Mac's that is. Apple doesn't supply a large enough AC power supply to both charge the battery, or stop it from being used, when the system is under heavy load. Once you start to run the system hard it will draw power from both the AC and the battery.

  • My ipod had a full battery but when i took it off charge and put my earphones in it it went completley dead and hasnt come back on. Can anybody tell me what is wrong and how to fix it?

    my ipod had a full battery but when i took it off charge and put my earphones in it, it went completly dead and hasnt come back on.  Can anybody tell me what is wrong and how to fix it?

    Try here to fix it.  I doubt that you will ever find out why it did that.
    iPod touch: Hardware troubleshooting

  • How much should an iPad 3 battery drain when watching videos over Wi-Fi?

    How much should an iPad 3 battery drain when watching videos over Wi-Fi?

    Try Battery Doctor. It'll provide you with plenty of info on battery consumption.
    https://itunes.apple.com/sg/app/battery-doctor-hd/id459702901?mt=8
    http://i1224.photobucket.com/albums/ee374/Diavonex/17e0b678bc14bd16c469f71151a08 a7d_zpse788fae8.jpg

  • Why iPhone 4 does not connect with the charger or mac but charges when it is powered off and connected?

    My iphone 4 doesn not connect with charger and mac book. however it does charges when it is powered off and connected with charger. Any clue ?

    I hope you are having a great and sorry to learn that you are having this issue;
    Since I could not check what version of the laterst firmware,  I hope you don't mind doing the following in your printer:
    Updating the All-in-OneFollow these steps to enable automated Web Services updates, and to update the product firmware.
    Important : The HP product must connect to a wireless network with an active Internet connection to receive updates. However, the product does not need to be connected to a computer.
    On the upper left side of the HP product control panel, touch the Web Services icon ( ). The product control panel displays the Web Services screen.
    Touch Settings . The product control panel displays the Settings menu.
    Touch Product Updates .
    Touch Check for Product Updates Now .
    Wait for any updates to download and run.
    If you using Win XP or later please run this tool to see if you get any errrors Click here
    Is your printer on warranty? if you do not know you can use this tool;  GO HERE.
    Hope this helps and let me know if I can assist you any further I will do my best to provide you assistance;
    RobertoR
    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

  • HP ENVY dv6t-7300 QUAD: Battery Drains when Shut Down & Doesn't Charge when Battery life is 93%

    My HP ENVY dv6t-7300 QUAD had battery discharge when I left it off for a few days on, so far, three occasions:
    The battery fully discharged to 0% from 100% when the laptop was left off for a peroid of two weeks
    The battery discharged to 95% from 100% when left off for a seperate period of three days
    The battery discharged to 94% from 100% when left off for a seperate peroid of four days
    These three instances did NOT come consecutively.  
    When the laptop is left off for one day though, the battery life is at 98% or 99%.
    On all occasians, the computer was shut down from the settings tab and NOT put into sleep mode or hibernate mode.
    The other issue is that on two different occasions the laptop says that the battery is not charging when the battery life is > 93%.  So far, I have not seen this problem appear when the laptop was below 93% battery.
    This problem is intermittent.  The first time it happened, the laptop began to charge at 93% battery life and continuted to sucessfully charge until today (8/11/2013).  Currently, the battery life is at 97% and the battery will not charge.
    I have performed a start-up battery test and the result displayed on the start-up screen is:
    Battery Check: Primary-OK (1)
    The result from the HP Battery Check from the Desktop Screen says:
    Status: OK (0)
    Charge Capacity: 97%
    This screen also says that the battery is:
    Charged (97%)
    Current: 0mA
    Full Charge Capacity: 5458mAh
    Remaining Capacity: 5319mAh
    Failure ID: OK
    There is also one other interesting thing about this laptop:
    When HP Searches for Drivers for my laptopr, the driver detection program detects that I have an HP ENVY dv6-7398ca, not a dv6t-7300 QUAD like it states under the battery compartment.
    I have had this laptop since abour June 20, 2013 and I believe the warrenty is still good on the parts.
    If anyone has any suggestions on how to fix these problems, I would greatly appreciate it.  Thank you.

    bump? no help?

  • HT203175 how do i know if my phone is charging when it just powered off and wont power back up?

    How do I know if my phone is charging when it just powered off and wont power back up?

    Hold the power button and it should show a red battery icon with a lightning bolt symbol. That symbol indicates charging.

  • How do you fix a iPod Touch 4G when you had it off for 2 weeks and charging it back faster.

    How do you fix a iPod Touch 4G when you had it off for 2 weeks and charging it back faster?

    After charging overnight
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

Maybe you are looking for

  • Java bug in a multi monitor application

    Hi, I am developing an application using three monitors on windows platform. I am using a NVidia GeForce 4 card to derive the monitors. My application opens up in a secondary monitor, It consists of a Canvas whose parent is a JScrollPane, a JTree who

  • Need to transfer music using ipod to new computer.

    i need to transfer my music using ipod to a new computer.

  • Tables-Urgent

    Hi Gurus, Kindly let me know how to find out table name  from structure name & field name. For Eg:I'm running a particular transaction,If I press F1 on some field most of the time it shows struct name & fieldname in technical info button. If I want t

  • Single click opens mail?

    When I am using Mail and I click on a new mail item one time (intending to view it in the lower half of the panel) it opens in a new window? I do not want it to open the message in a new window unless I double click it. Which is what I would ordinari

  • Transfer iWeb contents to another computer & merging Domain.sites2 files.

    Hi I've a MacBook Pro with one set of iWeb files which are published. I've an older MacBook which contains a different set of iWeb files, which are also published. I want to consolidate both these set of iWeb files on one computer. I was reading that