(40 GB Ipod with click wheel) Restored my ipod, error messege of a plug in-

Ok so I got an ipod. Ok so I plug it in my Microsoft XP computer. Open Itunes (by the way it takes 5 minutes to recognize the ipod, and eveything freezes) and it says it needs to be restored, so I restore it and then I get the Plug-In icon of the wall charger. So I give it to my friend cuz he has one. I get it back the next day and plug it in again, ( again my computer freezes for 5 minutes) and it says it needs to be restored again. I barely got the ipod and it was used. HHEEELLLPPP!. I tried sites that i read in other discussions and nothing works.
Ipod click wheel   Windows XP   Used Ipod

Have you tried connecting it to another PC or Mac to see if it recognized there?  This will help determine if it's an iPod issue or a Mac one. 
I assume you have tried a different cable and USB port?  If the iPod powered on when you connect it?
B-rock

Similar Messages

  • IPod with click wheel - will not restore

    Hi all,
    I know I've got the dinosaur of the iPods, but hey. I have a 20g iPod with click wheel. Every time I load up iTunes with the iPod plugged into the PC, iTunes tells me that my iPod is in recovery mode and needs to be restored. (Not sure how that happened, but anyway.) So, I tell it to restore, then plug it into the external power supply as it tells me to do. However, when it is finished restoring, and I plug it back into the PC to reload the songs from iTunes, the cycle starts again. I have restarted my computer, done soft resets of my iPod, but it still won't update. Any help would be appreciated. Though the newer iPods are very pretty, I am quite happy with my old dinosaur, haha.

    After a lot of searching and working on this, I found the problem - and it wasn't my previously theorized conspiracy to get us all to buy more from Apple.... It was quite simple actually.
    http://docs.info.apple.com/article.html?artnum=304508 I followed all of these directions including re-installing the dlls and the usb drivers, but I think the key was that I have multiple USB devices plugged into my computer. I unplugged all but my wireless keyboard. Then I used a different USB port for my iPod than I had tried before. It updated..... Yeah. I don't have to buy one of the new over priced fancy models!!!!

  • Cannot sync iPod with click wheel to iTunes...

    I cannot sync my iPod with click wheel to my iTunes on Windows. I have already attempted the five R's, multiple times, including restoring my iPod three times, and updating my iTunes software. But when I plug my iPod in, it takes forever to be recognized by iTunes, and just sits there, whizzing and clicking, with the "Do Not Disconnect" message blinking. After awhile, iTunes will download a song or two from my library, then quit. I often get a message that says my iPod is "corrupted." Help! How can I get my iTunes library back on to my iPod?

    I am having similar issues. I have received lots of advice, none of which work so far but there is lots to try here. Good luck!
    http://discussions.apple.com/thread.jspa?threadID=930956&tstart=0

  • I updated my 20G iPod with click wheel and now it wont turn on all the way

    Ok so I updated my 20G iPod with click wheel with the latest version (three point something), and now when i try to turn it on, it shows the apple logo and then has a pic of an ipod being plugged into a power adapter being plugged into a wall socket. i have reset it about 40 times and it always does the same thing. i have tried to charge the ipod with my computer but it does absolutely nothing (i dont have a power adapter). Also, when i reset my ipod WHEN IT IS PLUGGED INTO THE COMPUTER, it shows the "Very low battery" picture.Also, my computer does not see the iPod in "my computer" or iTunes. I have another iPod, which works perfectly on my computer. I thank anyone who tries to help me.
    Windows XP

    You must have a charge of your iPod with an ac charger, in order to complete the Restore process.
    You can also charge your iPod with
    1. iPod car charger
    2. iPod speaker dock system e.g. iPod HiFi or Bose soundstage

  • IPod with click wheel

    My mom has an iPod with click wheel (an older version) and it turns on fine and the computer will acknowledge it when it is plugged in, but the click wheel/keypad doesn't work. When she presses any buttons it doesn't do anything. Like I said it turns on but from there you can't get off of the menu and listen to music or anything because the keypad doesn't work. Please help me with this one, I would really like some alternative from sending it to an apple store. Thanks!
      Windows XP  

    "which i don't want to do because i only got my new iMac this week and have just finished installing heaps of software."
    An archive and install won't affect any software on your computer. I assume you've seen all these?
    iPod doesn't appear in iTunes or on the Mac desktop.
    iPod does not appear in iPod Updater or iTunes in Mac OS X.
    iPod appears on the Mac OS X desktop but not in iTunes.
    Try to restore it in disk mode.
    Putting iPod into disk mode.

  • IPod with click wheel not recognized by computer and doesn't show up in itunes. Have went through all the suggested tips and its not the cable.

    ipod with click wheel not recognized on two separate laptops. Checked the cable and newer ipod shuffle works fine.  Ipod will play already loaded music and play from a dock.  Have went through the 5Rs and still not working. Any help appreciated.

    Checked the cable and newer ipod shuffle works fine.
    You're not trying to connect the iPod with click wheel using the short USB cable for the iPod shuffle, are you?  If so, that won't work.  The shuffle uses its headphone jack for the data connection.  All other iPods use the dock connector, using a standard docking cable.

  • Ipod with click wheel. Windows displays device not recognized problem.

    I'm using a ipod with click wheel, and hooking it up through a usb 2.0 port with the stock cable.
    I keep getting a device not recognized message from windows, and the itunes software 8.xxxx does not recognize it even in diagnostics tests. Everything else is pass, except the ipod recognition.
    The battery needs to be charged, and is depleted but its not recieving a charge when plugged into the computer.
    Does anyone have a solution to this?
    Message was edited by: johnqthesne
    Message was edited by: johnqthesne

    If the iPod is not getting a charge through the cable (and the battery is depleted), it may not be recognized because the iPod has no power to do anything.
    I would say the problem is either a faulty dock connector on the iPod, a faulty cable, or a faulty USB port on the computer. You have probably tested the USB port possibility already by trying a different port (or trying another USB device on the same port), so I would try a different USB docking cable as the next test.

  • Where can i buy a new charger for my ipod with click wheel,the old had burnt.tnk.i need it urgent.

    Where can i buy a new charger for my ipod with click wheel,the old had burnt.tnk.i need it urgent.tnk

    By "charger," do you mean a USB power adapter that plugs into the wall outlet (used to "charge" the iPod), or are you asking about the USB docking cable that connect the iPod to the computer?

  • Will the accessories for iPod with click wheel 20G work with the new gen?

    Hi,
    I have a iPod with click wheel 20GB and am considering to get a new one, iPod with video 40GB or 80GB. Can I still use the following iPod accessories for 20GB one?
    - dock
    - USB power adapter
    Thanks.

    I know a iPod comes with a usb cord but I would like to use the USB power adapter I have so I can charge iPod during travel with computer/laptop.
    It seems to me that the connector in USB power adapter is a regular USB type B connector. But, I could not find the information to confirm it is a regular USB type B. Even it is the regular USB type B connector it does not work with the a usb cord shipped with iPod, which is a USB type A connector. That's the reason I would like to know if I can use it with new generation of iPod.
    Or, I can just get a USB connector converter. But, not sure if it can supply the enough power to ...
    B.t.w., the model number of the power adapter is A1070.

  • IPod with click wheel stuck

    I have a iPod with click wheel 30gb. The screen froze on the apple logo. I can reset it, and the screen would go blank for one second. Then, it'd go back to the frozen. HELP

    UPDATE: It finally decided to start working again, but it's been rather wonky for quite some time now. I'm not at all happy, especially considering I can't afford a new one.

  • Can one tell me if the games for iPod with Click Wheel with the 6G iPod compatible?

    Can one tell me if the games for iPod with Click Wheel with the 6G iPod compatible?

         No, the clickwheel games are for certain clickwheel only generations. There are no games for the nano 6 (yet)!

  • Ipod with click wheel Bad Sound

    When i sync the music onto my ipod from my PC all goes good but when i go to listen to the songs on my ipod i hear constant clicking during the songs like im using the click wheel. Any suggestions?

    Checked the cable and newer ipod shuffle works fine.
    You're not trying to connect the iPod with click wheel using the short USB cable for the iPod shuffle, are you?  If so, that won't work.  The shuffle uses its headphone jack for the data connection.  All other iPods use the dock connector, using a standard docking cable.

  • Firmware reflash - iPod with Click Wheel

    Anyone know how long it takes for a firmware reflash to take place?
    Downloaded the latest software. Then told to reconnect to power source. A faded Apple logo appears then disappears. Apple support website is listed then a plug connection graphic is displayed. Unit seems to be overheating & screen looks dark and foggy.
    Just can't get out of the revolving door!
    Help!!!
    Ipod 20Gb with Click Wheel   Windows XP  

    Never had an answer to this but it transpired that the iPod was dead from overheating and Apple replaced the item as it was within the warrantee period.

  • Help! Compilations in ipod with clicking wheel

    Hi There,
    Although i marked a lot of my songs as part of compilations (and i can see them this way on Itunes), they don't appear as compilations on my ipod w/clicking wheel.
    Is it possible that the clicking wheel ipod does not support this feature? Is there any way to solve this problem?
    Thank You
      Windows 2000  

    Anyone heard of this problem?

  • IPod with click wheel, refuses to restore

    This problem is hapening with my first iPod, click wheel model.
    I am trying to restore it but it doesn't allow to do so.
    When the iPod is disconnected from the Mac, pressing the MENU and/or Selection button, I get a folder's clipart while turning it on, and the message www.apple.support/ipod (reason why I am here now).
    If I connect my iPod to my iMac, it detects it with a problem and proposes a restore. I then start the restore èrocess and after 1 minutes the process stops and the message I get is "can't restore, iPod is busy". I tried to disconnect it, reconnect it but same problem.
    Also very strange, looking at the support website, it says that itunes would propose various restore options but I don't get any....version of software on my iPod is 3.1.1. vesrion of iTunes I have installed is 7.7.1
    Is there another way to format the iPod, thanks for your help !
    Cheers
    V.

    Hello,
    Try forcing your iPod into disk mode:
    Ensure the HOLD switch is OFF so that there is NO orange color showing beneath the switch. Then, press and hold the MENU and the SELECT (center) buttons together for about 10 seconds, until you see an Apple logo. When you see the Apple, IMMEDIATELY press and hold the SELECT (center) and the PLAY/PAUSE buttons together until you see a check mark, and the iPod says "Disk Mode, OK to Disconnect."
    Once it is in disk mode, reconnect it to the computer and see if you can restore it in iTunes.
    The various software versions may reflect an older utility used to restore the iPod (called the iPod Updater, available in /Applications/Utilities/. With the release of iTunes 7, that piece of software was no longer necessary, and iTunes is supposed to automatically detect and download the most recent version of your iPod software.
    CG

Maybe you are looking for

  • Neg graph values in graphic columns?

    I can enter negative graph data and have the affected graph bars extend below the 0 line no problem. with flatm 2D-appearing column designs, this isn't much problem; graph column designs which are meant to be 3D in appearance, ie with depth/both, sim

  • Where have I gone wrong? (PS3 + 23" Cinema Display)

    Here I was thinking I was so clever buying an HDMI to female DVI adaptor so I could watch glorious blu-ray movies on my 23" Alu Display. However, after changing the video output on the PS3 to HDMI using my normal RCA TV and connecting the display up,

  • How to start a video chatting?

    I'd like to set up a video chat with a relative.  I haven't had any luck. I tried sykpe and iChat.  I cannot find working software for skype. iChat will not accept my aim.com user id.  I get invalid username or password.  I am able to log into aim wi

  • OWB 9.2.0,Oracle 9.2.0?

    Hi: I create a target module,design star schema .But fact table's foreign key display "ORA-01741:unlawful zero length identifier" in the creating deployment every time,but I setting it is NUMBER ,and precision is 6. It also can't upgrade the fact tab

  • Why did Mac throw a punch below the belt?

    I went to buy the new iPod touch only to find out that I have to have the newest operating system. I own an iMac G5 and powerbook G4, with no reason to upgrade. I don't use iLife except for iTunes. The newest iTunes will work on all my computers, but