40 possible to run on s60?

Hi,
Just a simple question please but not for newbies.
I learned by search that applications on series40 are based on something called j2me, and that applications of S60 don't work on series 40. my question here is: if I buy series 60 phone in the future do applications of series 40 work on s60?
thanks.
..who wants kudos
guidelines for Nokia discussion forums are here: http://discussions.europe.nokia.com/discussions/board/message?board.id=guidelines&thread.id=2
Solved!
Go to Solution.

the applications on s40 version are java based (j2me = Java 2 Micro Edition) and on S60 devices they are in .sis,sisx formate (.SIS= Symbian Installation Source) but u can also run j2me apps on ur s60 device without any problem but if they are compatible with ur phone. so u should buy a s60 phone for more apps and fun.
¨Arm yourself because no one else here will save you¨

Similar Messages

  • Is it possible to run sub vi and main vi at same time from startup?

    Is it possible to run both my main vi and my two sub vi`s from startup, all of them continuously? I have to sub vi`s that are supposed to take in measurements from two different instruments continuously. I manage to make a program where I can open up and close the sub vi`s, but when my sub vi`s are closed, nothing is happening in them...and they start to run again when I open them...and I have to close them if my main VI is supposed to run. So the data in the chart is only from the periodes when the sub vi has been open.
    Thanks in advance for your help!

    I will send my labview programs. "Hovedprogram" is my main vi, "front" and "front 2" is my sub vi`s. I am also using global variables. I have already searched the discussion forum trying to find an answer to my problem, but I haven`t quite managed yet...
    My sub vi`s are not connected to any instrument now, but I have inserted a sinewave-generator and a chart in "front"(my sub vi) so I am able to see that the sub vi actually stop running when i close the window.
    Attachments:
    front2.vi ‏17 KB
    Hovedprogram.vi ‏42 KB
    front.vi ‏69 KB

  • Is it possible to run the Classic Environment INSIDE Rosetta on a MacBook Pro (Early 2008) with Leopard?

    Hi there,
    Rosetta works up until Snow Leopard. The Classic Environment works up until a late version of Tiger. Rosetta makes apps. built for PowerPC Macs work. The Classic Environment make apps. for Mac OS 9 work on Mac OS X for PowerPC Macs.
    Would it consequently be possible to run the Classic Environment INSIDE Rosetta?
    I have read https://discussions.apple.com/docs/DOC-2292, but I am still unconvinced unless there is a flaw to my logic. At any rate, I subscribe to the Churchillian adage of never giving in unless the forces of common sense and doctrine dictate otherwise.
    If it won't work, then why?
    Best Regards,
    Stefan

    Hi there, Klaus1, BDAqua and a brody,
    Thank you ever so much for your kind replies! (I tried giving you the 10 pts. of 'Correct Answers' to each of you, but unfortunately it was only possible for Klaus1, so the points were distributed between him and BDAqua even though you were all helpful!)
    My next question will naturally be: Is SheepShaver legal? My Google search didn't yield any conslusive proof that it was, nor any that it wasn't, but as the E-Maculation web page seemed quite official and above board I would assume that it is.
    The next logical step would be to ask whether it's safe for both HW and SW to run SheepShaver. HW, it appears, is very rarely, if ever, affected by SW settings, so I would assume that hardwarewise, I'm good to go. Could it ruin the kernel of Mac OS X's Unix-based operating system?
    Kind Regards,
    Stefan

  • Is it possible to run an application from a user or container login script?

    Is it possible to run an application from a user login script or a container login script?
    A "Force Run" application object works fine if the user's workstation is setup to auto-load "Application Window" or "Application Explorer" but in this case I'd like to run an application when someone does a manual login (ie. they right-click red "N" and choose "Novell Login...")
    Using a User Package's "Scheduled Action Policy" and the Event=Login also does not work when a user logs in manually. This type of Event seems to only apply when the user first logs into the workstation, not at a manual login.
    Thanks,
    Marc

    > Is it possible to run an application from a user login script or a
    container login script?
    Yes, see the documentation:
    http://www.novell.com/documentation/...a/a7q6999.html
    Regards
    Rolf Lidvall
    Swedish Radio (Ltd)

  • Is it possible to run a java program without using the command prompt?

    Hi,
    I was wondering whether it is possible to run a Java program (not an applet) without using a command line in the command prompt?
    Basically I want to run a program that will be continually running in the background and hence I don't want to have a command prompt screen loaded up as well - I just want the program to be running in the task bar.
    I know how to run the program in the task bar - but I still need to launch the program from the command prompt - is there anyway I can get a program running without having to start it from the command prompt?
    Cheers

    Or create a desktop shortcut (in Windows) or an application launcher ( in Linux GUI).

  • Is it possible to run two different versions of Apple operating system (for ex. 10.6.8 and 10.9) on a MacBook Pro, either on the same disk or from an external hard disk? If so, where would I find the details?

    Is it possible to run two different versions of Apple operating system (for ex. 10.6.8 and 10.9) on a MacBook Pro, either on the same disk or from an external hard disk? If so, where would I find the details? (In order to be able to use the older applications no longer supported in 10.9)

    If you want to add a second partition to the internal drive (in Disk Utility, select the drive, then open the partition tab and just click the + button), you should first be sure that you will have enough room to accommodate whatever the second volume will be. I am currently doing this for Snow and Mountain Lion.
    To get to whatever volume is not the startup disk, restart and hold down option/alt at the chime, which will bring up a selection of the two volumes. Use the left or right arrow keys to select it and then hit enter/return.

  • Is it possible to run 5.5 on windows 8.1??

    Is it possible to run Photoshop 5.5 on Windows 8.1? I have a CD which I tried to run but when I click on install nothing is happening. I have CS6 trial already running on the laptop, so my question is, is it because I need to uninstall CS6 (although I haven't got a warning message come up to tell me to do that first before running 5.5, so don't want to get rid of the CS6 trial without making sure that it is the problem) or whether 5.5 will not run on Windows 8.1 anyway.
    Your time and advice would be greatly appreciated, as need to know whether I need to return the 2nd hand 5.5 CD.

    Thanks so much Gene. I really appreciate your time and suggestions.
    Btw, should have been clearer  as one couldn't imagine I meant that 5.5 (i.e. ancient one). The adobe website also has this info: Windows 8.1 compatibility for Adobe Photoshop version 5 which just says version 5.5 under compatibility. So it does seem possible indeed to run this but perhaps for someone more techie. Had a look at the thread re: 6.0 and tried to run it as admin. Tried copying the contents on the desktop and change the compatibility under properties (even ran compatibility trouble shooter under properties) - but in vain. Must be doing something wrong. Prolly easier to return the CD (:/)
    If anyone could drop an idea in relation to how/where to buy a genuine and legal copy of a CS5/CS6 I woudl greatly appreciate. I bought the 5.5 off eBay and probably will search for the right version this time on there again. But it's a bit of a question mark for me in regards to how do I make sure that I buy a genuine licenced version which I can register with the Adobe.

  • Is it possible to run Posture using ISE 1.2 without NAC Agent provisioning?

    Is it possible to run Posture using ISE 1.2 without NAC Agent provisioning?
    -My customer does not want to push NAC Agent installation on BYOD type of computers (non-managed by the company computers).
    -The requirement is to check for posture only company owned wired, wireless, and VPN connected Windows computers. The rest of the endpoints should be considered as posture incompliant, and limited access to the network should be allowed.
    -No certificates are used.
    -I’ve configured the required posture check, and it all works fine if a PC has NAC Agent manually installed (without ISE Client Provisioning). However, when I use a PC without NAC Agent, it is redirected to Client Provisioning Portal and is stuck there as Client Provisioning is deliberately not configured in ISE.
    -If I remove Posture Remediation Authorization Profile that does URL redirect, the posture does not work.
    -For now I'm testing it on wired endpoints.
    Is there a way to configure ISE to fulfill the listed above requirements?
    Any ideas would be appreciated.
    Thanks,
    Val Rodionov

    Everyone who finds reads this article,
    I'm answering my own quesiton "Is it possible to run Posture using ISE 1.2 without NAC Agent provisioning?"
    The answer is Yes.
    After doing research and configuration testing I came up with a solution, and it works fine for wired and VPN connections. I expect it to work on wireless endpoints as well.
    ISE configuration:
    Posture General Settings - Default Posture Status = NonCompliant
    Client Provisioning Policy - no rules defined
    Posture Policy - configured per requirements
    Client Provisioning (under Administration > Settings) - Enable Provisioning = Enable (it was disabled in my first test)
    Authorization Policies configured as regular posture policies
    The result:
    After successful dot1x authentication posture redirect happens. If the PC does not have NAC Agent preinstalled, the browser is redirected to Client Provisioning Portal and a default ISE message is displayed (ISE is not able to apply and access policy... wait one minute and try to connect again...). At the same time, the endpoint is assigned NonCompliant posture status and proper authorization policy is applied. This is what I wanted to achieve.
    If NAC Agent was preinstalled on the PC, after successful dot1x authentication the NAC Agent pops up and performs posture check. If posture is successful, posture compliant authorization policy is applied. If posture check fails, NonCompliant posture status is assigned and posture non-compliant authorization policy is applied. Which is the expected and needed result.
    The only part that is not perfect it the message displayed to the end-user when posture is about to fail. I did not find a place to change the text of that message. I might need to open TAC case, so this file can be manually found and edited from CLI (root access).
    Best,
    Val Rodionov

  • Is it possible to run process chain from the certain process/point?

    Hello
    Is it possible to run process chain from the certain process?
    How?
    Thanks

    Hello,
    yes it possible! use the following steps.
    1. Goto the process which you want the chain to start from.Goto display messages>> Chain tab. In the generated instance note the variant and instance.
    2. Goto table RSPROCESSLOG and give variant and instance and get logid details.
    3. t codese37>> run FM RSPROCESSFINISH.
    4. give the deatils u have got in RSPROCESSLOG table here and say execute.
    This will solve ur problem.
    Hope this helps!
    Reg
    Deepmala

  • Is it possible to run a java application within a web browser?

    Hello everyone here! I have a question about running a java application within a web browser and I would appreciate it very much if anyone here can give me some answers.
    I have a standalone java application written with AWT. Basically this free application lets users to select spectral lines from a big file based on some criteria and plot those selected lines. Yes, it is a very simple application. Now I want to run this application within a web browser so that users don't need to download the application from the ftp site and thus don't need to install in their machine. Is it possible to run this application within browser? If yes, can we get the same plotting function as we run the application separately and where should I start out?
    Thanks in advance!
    kuilian

    Please see the signed applet discussion group for details of how to avoid the applet security restrictions. You can sign the applet, or use the policy file containing {AllPermission} for testing purposes (though not suitable for widespread deployment).
    Regards
    Matthew

  • ASE instance not available *** ERROR:ASE instance possibly left running when system went down(system crash?). Notify Database Administrator

    Hi Gurus,
    I made some changes in rz10 for client copy like:
    icm/host_name_full [email protected]
    login/accept_sso2_ticket 1
    login/create_sso2_ticket 2
    icm/server_port_1
    PROT=HTTPS,PORT=443$$,PROCTIMEOUT=600,TIMEOUT=600
    icm/server_port_0
    PROT=HTTP,PORT=80$$,PROCTIMEOUT=600,TIMEOUT=600
    login/no_automatic_user_sapstar 0
    After to make changes effective, i stopsap & startsap.
    But unfortunately db is not coming up. I checked startdb.log it showing
    error as " ASE instance not available
    *** ERROR:ASE instance possibly left running when system
    went down(system crash?).
    Notify Database Administrator."
    Please help us to resolve this issue, i have also added startdb.log for
    your reference.
    Regards,
    Piyush

    Hi Piyush,
    Did you solved this issue.
    We are facing the same issue and only this thread is there in SCN for this issue.
    If you solved this issue,Kindly share the solution.
    Thanks and Regards,
    Mathan A

  • Is it possible to run 2

    Hey!
    I got 2 speakers connected to an amplifier, but then again i got 2 sub woofers which i want to connect to my Audigy 2 ZS so i can filter out the lower frequencies. So my subs play under 80hz, and my monitors play over 80hz... cuz my monitors starts backing up at higher volums because of the lower frequencies.
    Is it possible to run stereo jack and stereosubjack and filter from the card or do i need heavy duty driver modification?.

    In the case of 2. speakers, you actually use only a "2.0" output and the high/low separation is done by conventional electronic filtering by the amplifier, not by the card.
    There's no sound source or format storing 3 separate channels (e.g. two stereo + "bassline" channel). There's 5. and 7. of course which do so, and even then then bass channel is either the sum of all other channels bass or (rarely) specially crafted on its own for systems that do support it.
    In other words, nor the soundcard nor the amplifier have a separate "bass in/bass out" for a stereo config, and there's absolutely no sound system with a "stereo subwoofer".
    The closest you can get to "2.2" is using a 4.0 system with two separate 2. amplifiers, and thus each subwoofer will have the sum of the bass of only two of the speakers.

  • Is it possible to run an iPhone and an iPod off of one iTunes account?

    Is it possible to run an iPhone and an iPod off of one iTunes account?  I want to buy an iPhone but I also want to use my Ipod Touch

    NyVetteGuy wrote:
    As a clarification, you can have up to 5 devices with iTunes.
    Sorry, this is incorrect.  The limit of 5 relates to the number of computers you can authorize to use iTunes, NOT the number of iOS devices you can sync with a single iTunes library.  You can sync as many iOS devices as you like to iTunes.  See whitewater2's post below... he is syncing at least 6 iOS devices with the same iTunes library.

  • Is it possible to run both Netflow v5 and v9 at the same time

    Hi All,
    Just wondering if it is possible to run netflow version 9 and version 5 at the same time (to different destinations) on the same router please?
    Thanks very much
    Regards
    Amanda

    No Amanda,
    we cannot simultaneously configure both versions of NETFLOW on cisco ios. After configuring firstone when you try to configure other version it will override the previously configured version.
    "Please do rate helpful posts"

  • Is it possible to run a website built in Java and applet from Safari browser in iPad

    Is it possible to run a website built in Java and applet from Safari browser in iPad?

    Java isn't supported on the iPad

Maybe you are looking for