4002 - first define the numbering series in the administration module

Hi all,
I have created the User tables and object type as Document and Document Rows.
While adding the records thru DI API objects using SAPbobsCOM.UserTable i am getting error like
4002 - "first define the numbering series in the administration module".
Is it possible to add the Document and Document rows tables or Master Data and Master Data rows tables thru DI API objects.
Please confirm.
Regards,
Benjamin Rosary.B

As far as I know this is not possible. You can't add to a table that is not of type "No Object" using the DI API.

Similar Messages

How do you print the numbers next to the first column

In Numbers I can't figure out how to print the numbers next to the first column to the left. Say I have 350 people on a list and I want to print the sheet with the numbers next to the people's name, how do I do that. Excel automatically does it. However, I cannot find the option to print and include the numbers from the standard Numbers worksheet. Thanks for your assistance.

In excel it is actually in the page setup dialog. under the "sheet" tab. Numbers doesn't have one table per page (excel is basically one large table of cells). So printing header and column labels doesn't really work in numbers, because those labels don't show up until you click inside the tables. If you notice when you do that they abstruct the view of everything else that might be near the edge of the table.
The other posters response is the best way to do it. you can get column Numbers (but not letters) by using the column command in an extra row at top also. Thre is a way if you really want column letters, but it ain't pretty. Let us know if you want that too.
Jason

Unable to edit First no in Numbering series

Hello Experts
One of my client has entered data in Purchase Order for first time .
First PO in the database .
But unfortunately numbering series wasn't set , and by default general document numbering had 25 as its next no for PO.
And user added the document with out checking the Document Number.
Then tried to edit the " First No " in numbering series , but it is not allowing me to edit that coloumn.
I was trying to edit because , as the user started from 25.i would like to make the first no as 25.then that particular series will be closed .
Is there any work around so that i can edit the first no . or any other work around that i can get rid of this scenario.
Regards
Krishna Vamsi

Hi Krishna,
I have a solution to your issue. Navigate into Administration --> Systerm initialisation --> Document Numbering double click on the purcahse order series # --> Series -Purchase order- setup.
Change the Period indicator from the existing row default and define a newname and flag (tick) the LOCK checkbox and then create a new line by right clicking and add row with the required First No., set the period indicator to Default and set the new line "set as default".
The PO will start with the new numbering series.
Regards,
Rakesh N

In the numbers app, using the "date and time" function, is it possible to remove the time? I need to put together a list of dates, but I don't need or want times.

In the numbers app, using the "date and time" function, is it possible to remove the time? I need to put together a list of dates, but I don't need or want times.

When formatting your column to date/time, pick Date & time, and then pick the letter i in the circle to the right. Then scroll down and pick "No time"
Jason

Where is the TV series of the week?

I am looking for the TV Series of the week, which I assume is 'The Revolution will be Televised' as mentioned in the iTunes Editor's Notes shown, for some obscure reason, under movie of the week, Babel. Does anyone know where to find the download?

Do a File/Get Info in iTunes and you'll see what I mean.
Each file (music or video) has a number of tags embedded in it. These cover things like name, artist, album, genre, etc.,
For videos, there's also one that says what type of video it is - Movie, Music Video or TV Show. That's how iTunes puts the video file in the correct category/section.
If that tag is missing, iTunes will include your video in the default Movies section.
When I rip - sorry convert - a DVD I own have have paid for, I use an application called Lostify (Google it) to add the correct tags.
But, my point is you don't need to worry about any of that. If you don't want your movies/tv shows on your iPod, then there's no need to add them to iTunes. Just put them in a sub-folder under your Movies folder for them to appear in Front Row.

My phone has changed from the numbered keypad to the large lettered keyboard. When I enter my 6 digit passcode it tells me I'm wrong. I've tried about 6 times and don't want to get locked out. It just started today??? Please help.

My phone has changed from the numbered keypad to the large lettered keyboard. When I enter my 6 digit passcode it tells me I'm wrong. I've tried about 6 times and don't want to get locked out. It just started today??? Please help.

carolinechx wrote:
i know the description may be a little bit too confusing
Mostly because you are not using any capital letters or paragraph returns and your post is difficult to read.

HT1386 After a full system update phone and comp, some of my contacts have been lost and most of them now only have the numbers remaining, can the lost contacts be retrieved completely somehow.

After a full system update phone and comp, some of my contacts have been lost and most of them now only have the numbers remaining, can the lost contacts be retrieved completely somehow.

At some point in the past, I synched with Gmail. Looking at my Gmail contacts, I can see that it's missing the same contacts I'm currently missing from the iPhone. Is it possible that I may have done that sync back in October 2009 (but not since) and then somehow recently over-wrote my contacts content with whatever was there? Is there some setting I could have tripped to make something like that happen?

Could somebody teach me how to set the lastest iTunes so that it repeats just one of the numbers installed from the CD? I've alreadly tried it by clicking "control" and the bottom, but it doesn't work. Thank you.

Could somebody teach me how to set the latest iTunes so that it repeats just one of the numbers installed from the CD?
I've already given it a try by clicking "control" and the bottom item which means one item in Japanese, but it doesn't work.
Thank you.

You can access the repeat options if you right-click on the shuffle icon or if menus are enabled you can use
Controls > Repeat > Off | All | One.
Once the control is visible you can click it to switch between states as before. If the control is turned to off it disappears on the next track change. In contrast the shuffle control remains visible whenever it is appropriate. Hopefully the next release will fix this.
The bottom one should do it.
tt2

What are the numbers next to the "Building edges from DisplayObject"?

Dear colleagues,
Could you help me to understand what are the numbers next to the “Building edges from DisplayObject”, please?
renderMode=direct
depthAndStencil=true
Scout 1.1.0.
Scout log file http://townden.com/forum-pictures/numbers_next_to.flm
this is test on iOS iPad 1 -- animation of dragon
Thank you in advance for help,
Vlad

The number "x 3" means that "Building edges from DisplayObjects" happened 3 times. The time shown next to it is the total time for all three of these activities. The same is true for "Calculating dirty regions x 2" - it means that it happened twice. You shouldn't worry too much about the number of activities though, just the total time for them - e.g. if Flash Player didn't have anything to do, it might finish an activity almost immediately, and this would show up in Scout with a negligible time (e.g. a few microseconds) - that's not something you should worry about.
If you want to understand the display list rendering operations better, you can read the article here:
http://www.adobe.com/devnet/scout/articles/understanding-flashplayer-with-scout.html

How do you make charts in the Numbers app on the iPad?

I've followed the guides, asked Geniuses and spoken with AppleCare on how to implement charts within the iPad Numbers app. So far I haven't been able together any help or suggestions.
I am trying to create a pie chart showing some data for an investment portfolio. So maybe 6 investments totalling 100%. When I select the data first and click on create a chart, it brings up one single segment showing 100%. If I add the data afterwards it does the same, sometimes when you click change from rows to columns will it bring up more than one segment, but not always. It also does not show the chart labels with the input data, and just leaves them as coloured dots.
I have found one one, way is to click individual pieces of data, so 6 clicks in this example, but it still doesn't show the labels and I can't work out how to make it do this.
It shouldn't be this hard, to create on of the new beautiful charts as advertised for this app, but yet no one at apple seems to know how it works, and suggest its either a bug or that the app isn't powerful enough to create charts?
I have tried on a first and third generation iPad, as well as on my pone 3GS and 4S but none of these work either.
Please help.......
Thanks
Nick

laserblues2
Start with your table. Create the table and values you need
Select the values to include by tapping on one cell and then dragging the selection handles
When "Create Chart" Appears, tap it and select your chart type (pie in this case) - the chart will appear as 100% filled, don't worry.
Tap the chart once and then tap Edit References - this will reveal a Gear Menu in the upper right
Tap the gear and select "Plot Rows as Series" or "Plot Coumns as Series" as needed
You should now have a pie chart that you can modify the style to your liking.
Good Luck

Is the ze5400 series in the same family as the ze4900.?

I have a ze4900us that the power jack is loose and won't charge or run the system. Have repaired once already.
I have a chance to buy a ze5400 cheap and running and wondered if I can just swap out my HDD, Ram, and wireless card?
Can anyone please help!
GT
This question was solved.
View Solution.

Hello @garyslt2,
I have read your post on how you are looking to see if you can swap parts from two different notebooks in the "ze" series, and I would be happy to assist you in this matter!
Both of these notebooks are part of the same series, but are not part of the same family. According to the Maintenance and Service Guide for the ze4900 (on page 79), and the ze5400 (on page 27), the part numbers for the components you are looking for are completely different. If you are still looking for a notebook to replace like-parts with the one you currently have, you can do so with the following models:
HP Pavilion ze4900 Notebook PC
HP Compaq nx9040 Notebook PC
HP Compaq nx9030 Notebook PC
HP Compaq nx9020 Notebook PC
Compaq Presario 2200 Notebook PC
I hope this helps!
Best Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

I use a French bluetooth keyboard how do i lock the numbers for doing calculations? Does anybody know? i.e. the numbers are above the top row of keys and you have to use the shift key to access them. You can't use the cap lock key to lock the numbers.

How do I lock the numbers on a French keyboard if I'm using a small blue tooth keyboard with no number pad?

How do I lock the numbers on a French keyboard if I'm using a small blue tooth keyboard with no number pad?

Editing text in PDFs - only the numbers are missing the font

When editing text in a PDF (created in InDesign), I can edit all the text EXCEPT for any numbers. When I try to input a number, I get the message "The original font XXXX is not available or can't be used in editing. Acrobat is using the font Arial in its place". It then places other characters in its place - not sure what they are but they're not numbers. Anyone have any idea what is causing this?

Sorry, I found my answer here:
https://forums.adobe.com/thread/1582291?q=arabic%20numbers
Apparently, the HINDI DIGITS checkbox under Preferences\Languages is by default checked. This ridiculous default resulted in Arabic numbers when editing the PDF in Acrobat. Editing text was fine, but whenever I would type in a number, it would appear as Arabic characters.

How to open the numbers window in the same place?

I like to have the Numbers window open in the same place every time (lower right hand corner of the screen), so that I can have the windows of other programs open too. As it is, I have to move it there every time. This isn't a big deal, I realize, but I didn't have to do that with the previous version: it always opened the window to the last place it was located when I closed the program the previous time.
Any tips would be appreciated!

Hi Roger,
Saving window size and placement is something that has been lost in Numbers 3.0. This announcement says that Apple will make 'improvements' within 6 months
http://support.apple.com/kb/HT6049
Numbers
Customize toolbar
Improvements to zoom and window placement
Multi-column and range sort
Auto-complete text in cells
Page headers and footers
Improvements to AppleScript support
Regards,
Ian.

I used to be able to drag the numbers when using the matte filter. Now I can't. Does anyone know why or have a solution

The only way to use the matte filter is to adjust the numbers in the filters tab in the viewer. Please advise

Do you have the View Mode set to Preview?
Are you clicking the Point Control for the point you want to move before clicking on the Canvas?
MtD

4002 - first define the numbering series in the administration module

Similar Messages

Maybe you are looking for