400GB Raid partition disappear -after file transfer from USB2 HD

Hallo, I have now been using my system prodly for two months, or so. But under a filetransfer from my removable USB 2.0 HD, a disaster happened An error message that said; Faulty writing. And my 400GB was gone from Windows
I have checked the raid drivers, and reinstalled them, and I can see at start up that the raid array is functional. With Seagate tool I can see that there is a partition of 400GB. What has appened
Anyone I have over 200GB of Movies on that partition, any solution on this
How to make Windows see the raid array partiton agin
I use still winXP SP2

Sorry for the late feedback, think I had to repress it for a while, the los of 200Gb
I used stripe Raid 0 for better speed...
Now I have given up Raid, so Iam using the IDE 3 & 4 as regular IDE connection for HD's.
So now I have started from scratch again .

Similar Messages

Startup disc full after file transfer from old mac

Hi everyone,
I had a Macbook pro that was about 6 years old until I bought a new Macbook Air. I tried to transfer my files via the migration assistant but it didn't work, so I backed everything up onto an external hard drive and then transferred everything via that onto my new macbook air. All the files saved onto my desktop in a file called "Olivia's MacBook Pro", but none of the files are directly linked to my new air (i.e., I can access my old pictures through my desktop but they aren't in my new iPhoto). The issue I'm having is that I often get a popup that says my startup disc is full. I followed directions on old threads that said to download omnidiscsweeper, which I did, and all the room is being taken up by that folder of all my old stuff on my desktop (~185 GB).
My question is- do I just have too much stuff? Is there a way to keep my pictures and such on my new computer without always getting this error message and having to shut down different applications? Please help! I am not very computer savvy
Thanks so much for reading.
PS- appx 76 GB of my computer storage is movies...but I don't have any movies saved on here that I know of... another 72 GB is "Other".
Thanks!!

Frankly, You'll probably waste more time and effort than if you just got a Firewire cable. I'm pretty sure you'll need to have a cross connect Ethernet Cable (I usually make my own, not sure where you'd buy one) to connect them via ethernet, and even then you still have to mess around with getting them to talk to each other. Other option is to plug both computers into a hub or switch, or better yet a router.
Another option is to spend $20 on a usb adapter that can connect any drive to your Mac. [Here is one that I have|http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo =2329300&CatId=3770] from Tiger Direct that works quite well.

IMac wont boot after file transfer from Windows laptop

Hi folks,
I am looking for some advice if anyone can help?
Sunday evening I transferred asome data off an old knackered Windows laptop via my home network. During the transfer, my 2013 iMac 27" started to really slow down and became unresponsive (i tried to cancel the data transfer and restart). In the end I have to force shut down by holding the power button in. Now, upon reboot of the machine, it won't get passed half way of the progress bar - and I've left it an hour at the most and given up.
I have attempted a verify and repair in Disk Utility, and even though I have managed to Verify Disk and Repair Disk, they took an absolute age to get through - I was chatting to an Apple Customer Care person, and they told me to chat back once it was done, which was probably 20-30mins after I started.
I then went on to Verify Disk Permission, which I left running for around 2 hours until it finished, and then moved onto Repair Disk Permissions, of which I cancelled after about 4 hours worth of it doing not a lot!
When I try and boot, it gets to a stage where the hdd is making a repetitive noise, as if it is stuck in a loop somehow.
I am running Yosemite 10.10.1, and have reset the PRAM to no avail.
I am fearing the worst tbh, but my main concern is the data on the drive - any tips on how to attempt to recover that data - or to fix the drive itself?
Thanks
Andy

The correct way to restart in Safe Mode is when you hear the "Bong" sound hold down and continue to hold down the Shift key until a progress bar appears. Here are Apple's instructions on how to correctly restart in Safe Mode.
I would recommend that you also look over Gray screen appears during startup.

Original File transfer from G4 to new G5

About to buy G5 20" this week -
Apple Store says they can do file transfer from my imac G4 to new G5 for me at time of purchase, but cannot transfer any 3rd party apps (Photoshop, Ill, DreamW, Acrobat, Word, etc.). However in users manual it looks like if I do it originally myself with SetUp assistant, I can include these apps -- but perhaps not later using Migration Assistant after Apple Store has used the SetUp assistant. I'd like to avoid having to re-install all my apps if possible.
Also, If I do it SetUp Assistant myself, is it best to use Firewire cable vs. Ethernet?
Any intelligence/advice would be appreciated.
thanks

I would just drag app files over via Firewire (which is superior over ethernet).
Here is how it is done:
http://docs.info.apple.com/article.html?artnum=58583

File Transfer From Unix server to Windows Client System Using WebUtil

Hi all,
I want to Transfer a File from Unix Server to Window Client System using Webutil. But below mention code is not working.
DECLARE
     V_Server_Path VARCHAR2(500) := Null;
     V_Client_Path VARCHAR2(500) := Null;
BEGIN
     V_Server_Path := '/proj/oraapps/viper/dev/reports/cache/Saveauftr.txt';
     V_Client_Path := 'C:\Migration\EU_Applications\Lima\OAS_WorkArea\Client\Saveauftr.txt';
     IF WebUtil_File_Transfer.Is_AS_Readable(V_Server_Path) THEN
     IF WebUtil_File_Transfer.AS_To_Client(V_Client_Path,V_Server_Path) THEN
          Message('Downloading the File ..... .... ... .. .');
          Message('Downloading Was Successfull ...');
          Message('File Transfer from Server Was Successfull ...');
     END IF;
END IF;
END;
Can anyone suggest me,Why the above code is not working and what to do for solve the Problem.
Regards
Gany

Hello,
You have more chances to get an answer in the Oracle Forms OTN Forum :
Forms
Regards

Getting error in file transfer from one system to another system

Hi All
One of my client (User) wants to transfer his file from SAP R/3 System SAP XI system. He is using a customize t-code ZFIR0325 (Trial balance report transfer to Hyperian System). When user execute the program he is getting error "File Transfer Failed due to Network chk with Admin"
I checked with Network team but they said it is okay from their side. We also check for authorization but there is no issue regarding authorization.
Name of File Path of Aplication Server, XI destinaion and XI directory entered by user is correct.
We also put authorization trace in XI System to RFC User (In file transfer from one system to another system this RFC User is geeing Used) but no authorization issue was found.
Please help me to resolve this problem. I any detail require I will provide the same.

Guruprasad Wrote:
He is using a customize t-code ZFIR0325 (Trial balance report transfer to Hyperian System).
We also put authorization trace in XI System to RFC User (In file transfer from one system to another system this RFC User is geeing Used) but no authorization issue was found.
Firstly, no one in the community can answer on how a custom transcation code and a program associated with it behaves.
If there are no authorization issues in the system, you have to look at the exact error message. Look if your XI system is allowed to receive files from the SAP system.
Unfortunately, you should do some more home work before putting your question here. If everything is fine and configured correctly, then the issue might be with the program.
Regards,
Raghu

I just installed photoshop ele. ver 11 and my file transfer from version 10 failed, what do I do?

I just installed photoshop ele. ver 11 and my file transfer from version 10 failed, what do I do?

I was transering my album from version 10 to version 11. I got on-line help and I and all set. Thanks for getting back to me. Dave
Scott V <[email protected]> wrote:
Scott V http://forums.adobe.com/people/Scott+V created the discussion
"Re: I just installed photoshop ele. ver 11 and my file transfer from version 10 failed, what do I do?"
To view the discussion, visit: http://forums.adobe.com/message/5105851#5105851

File transfer from one system to another system

How can I use ODI to do file transfer from one system to another system ?
Do I need to create Models or I have to simply use Jython procedure/script to do the same ? Kindly help. I have done DB to DB using Knowledge Modules. But I am not able to understand this piece.
Kindly help.

If you are asking about file transfer use ODI FTP tool to do it. If you are asking about file transformation..
You can not do file transformation directly in ODI like we do in any other ETL tool like data stage or Ab Initio.. File transformation in ODI can be done using staging database in an interface(i.e ELT way).
Create source and target data stores for the file to be transformed. Create an interface using File to SQL LKM to load the file into staging database and then use SQL to File Integration knowledge module.
Thanks,
D

File transfer from old G4 iBook to new MacBook Pro

I hope this is the right place for this post/question....
I am trying to do a file migration from my old iBook G4 PPC to my new MacBook Pro. The iBook does not have the migration utility and when I put the new OSX DVD in from my MacBook (as instructed to do in the Migration utility's steps) it does not read it (presumably because it is not the right processor, etc) so I had no luck doing the computer to computer transfer. I do not have the "Time Machine" utility on the old computer and using my regular back-up did not allow me to migrate using the "other drive" option (MacBook never saw the drive in the utility, but does mount it and allow me to access it as a drive). I can do this the hard way, file by file, but I have a couple of concerns that I want to check on before I spend hours going down a bad path.
1) I have thousands of songs in my iTunes... can I drag and drop these? What about my play lists?
2) iPhoto - I have thousands of photos - how do I easily transfer those over in their respective scrapbooks?
3) Bookmarks, I can deal with by trying to find the file and importing them, or doing it manually, although there are a lot of them. Easier way?
4) Outlook - I can try to export and import using the built in features, but not sure if that will pull all the folders and structure.
Those are the big ones... I have had this computer for 8 years, so it is pretty embedded in my life and I am hoping for a utility or something that will help this process.
Thanks in advance for any help.
Keith

The migration utility in the newer computer's OS X would usually allow
the older Mac's info to be pulled into the new computer; the installer
disc for the new Mac won't do anything for the old PPC Mac since it
would be unreadable. Intel-based Mac machine-specific discs won't
work in PPC-based Macs; and in general different machines can't
or won't use the install-restore discs from other models.
There may have been a way via ethernet, usb or firewire to share files
using a System Preference panel setting to facilitate this action. The
suggested method should be adequate. You can also put an iTunes
library and iPhoto library on a suitable external drive to par-down the
content and reduce clutter in a portable computer's hard disk drive
and still be able to access those carefully moved libraries from there.
Some good support documents in Apple Support tell how to do this.
In Firefox, you will have to rename the old folder of bookmarks to the
same name as the existing new apps folder for them to be seen. I
just replaced folders, carefully, so if that didn't work the first time, the
items were easy to find and try again later. Once you get the folder,
the contents should appear in the new browser version as they had
in the older one, to some extent, after the file or contents are moved.
Good luck & happy computing!

IPhoto in MacBook Pro 2013 only shows "place holders," but no photos, after data transfer from Macbook Air 32011

I am trying to transfer data from my MacBook Air 2011 to a "new" MacBook Pro 2013. Both are running Yosemite 10.10.2. Since Migration Assistant WOULD NOT WORK (the MacBook Air couldn't "see" the MacBook Pro), using my WiFi network, I transferred the necessary data to a 500GB drive and THEN to the MacBook Pro. However, two programs didn't transfer well - or at all! iTunes only transferred the Music (Media?) files, but not iTunes U, Podcasts, Audiobooks, etc. I have had to drill down into the storage files, retrieve the non-transferred files and add them, one by one - a most laborious task. But, this is nothing compared to the problem with iPhoto (9.6), which shows only 6 events and 4 Faces transferred, with the rest only place holders (black boxes and grey dotted squares) in all the folders in my iPhoto.
I "Showed Package Contents," and found the missing files - of which there are many! - and started adding them, again, one by one.
Can anyone tell me what happened to my iPhoto (Yosemite 10.10.2)? It's fine on my MacBook Air, but simply WON'T TRANSFER to my MacBook Pro?
PLEASE - someone tell me how to CORRECTLY transfer my iPhoto files and/or HOW TO MAKE THE MACBOOK AIR "SEE" THE MACBOOK PRO in Migration Assistant?

Hello Mary,
Sorry to hear that you are having issues with moving your data over to your new Mac. There are a few alternatives that you can do to migrate that data if you are not seeing it in Migration Assistant. The first is make a Time Machine back up to that 500 Gb external hard drive and then use that in Migration Assistant to copy the entire data over. If you do that you will want to remove any data that you have on your MacBook Pro after the transfer completes as it will create another user with the data from the MacBook Air. Another option is to use a Thunderbolt Cable that you can purchase online if you want and use the option from another disk to copy that over. Take a look at the articles below for more details.
Mac Basics: Time Machine backs up your Mac
https://support.apple.com/en-us/HT201250
Move your data to a new Mac
https://support.apple.com/en-us/HT204350
Apple Thunderbolt Cable (2.0 m) - White
http://store.apple.com/us/product/MD861ZM/A/apple-thunderbolt-cable-20-m
Regards,
-Norm G.

Auto-Accept File Transfer from only one person?

I know about the AppleScript that allows auto-accept of a file transfer in iChat but is there a way to specify which buddies in the list it works with?
For example I just want auto-accept from one person in my buddy list and no one else. Is there a way to specify this?
Thanks.

Hi,
Chax
This has amongst various features the ability to Set Auto Accepts to specific Buddies.
It adds a Preference Pane to the iChat Preferences and it is set there.
7:43 PM Friday; December 10, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

File transfer from source to destination location using 11g b2b

Hi,
I have a requirement where I need to transfer a file(custom file format) from a source location to a destination location using 11g b2b.
The problem here is I can't use any composite to push data to b2b, it has to be through b2b configuration alone.
If i understand correctly, delivery channel (in this case transport protocol is FTP) is defined for a trading partner and we specify the hostname,destination folder etc in the transport protocol parameter.
Is there a way I can specify the source location anywhere in the B2B configuration screens so that b2b understands what is the source and destination location to transfer the file.
Steps that I have followed:
1. created remote trading partner
2. created document definition for a custom file format
3. Configured Delivery channel for the remote trading partner.
4. Created an agreement.
Is there anything else I can do to solve this problem.
Regards,
Satrajit

Hi Nitesh,
Thanks a lot.
I tried with Generic file and the file is getting picked up from the source location but its not getting delivered to the destination.
Checked file permission in the destination and its fine, files can be created there. Also, checked the reports section and saw those messages in error with
Error Code: B2B-50014
Error Level: ERROR_LEVEL_COLLABORATION
Error Text: General Error
Steps I have followed:
1. Created Internal Listening channel
Protocol: Generic File-1.0
Folder Name: Important.txt
Folder Name: /home/applvis/dev/Inbound_dir and specified it as internal.
This is working fine as file is getting picked up from the location
2. Created Delivery channnel for the remote trading partner.
Protocol: Generic File-1.0
Folder Name: /home/applvis/dev/Outbound_dir
Filename format: Ship_%FROM_PARTY%.txt
3. Created and deployed the agreement.
Am I missing any necessary step here?
Regards,
Satrajit

Photo image size after file transfer much smaller

I am transfering photos over to my wife's Macbook and after the transfer, the photos are of a much smaller file size. Is there a way to transfer the photos at their full image size?

Dragging and dropping to a web-based email (gmail) makes the photo appear inside the message itself, and not as an attachment, which is what I wanted.

Photoshop Elements 10 installed on my computer. Ready to install elements 12. Will my digital files transfer from 10 to 12?

I have Photoshop Elements installed on my Windows 7, 64 bit computer. I want to install Elements 12. Will my digital files in the Organizer transfer from Elements 10 to 12 with no problems?

ccr306
If your programs are Photoshop Elements, then you have posted in the wrong forum. This is the Adobe Premiere Elements Forum (video editing), not Adobe Photoshop Elements Forum (photo editing).
Photoshop Elements
If wrong forum, then please re-post your question in the Adobe Photoshop Elements Forum or wait for a moderator to see your thread here and move it from here to there.
If I were doing this I would probably have the two versions of Photoshop Elements on the same computer and convert the Elements Organizer 10 catalog in Elements Organizer 12. (See Elements Organizer 12, File Menu/Manage Catalogs/Catalog Manager/Convert. But, best ask the experts in the Adobe Photoshop Elements Forum.
The following Adobe document on upgrading Elements Organizer catalogs may be of interest
Common catalog upgrade issues | Organizer | Elements 6 or later
ATR

Ethernet interface disappears after waking up from sleep

Hi guys,
I've been trying to debug a networking problem without any luck and I think it's about time I ask the forum for help.
My ethernet interface no longer works after I wake up my computer from sleep. I have no idea why.
Before sleep:
# ls /sys/class/net
lo wlp2s0 enp3s0f2
After waking up from sleep,
ls /sys/class/net
lo wlp2s0
Here are the list of services I have running.
UNIT LOAD ACTIVE SUB DESCRIPTION
dbus.service loaded active running D-Bus System Message Bus
[email protected] loaded failed failed dhcpcd on enp3s0f2
[email protected] loaded active running Getty on tty1
[email protected] loaded active running Daemon which acts upon network cable inse
kmod-static-nodes.service loaded active exited Create list of required static device nod
[email protected]\x2dSecure.service loaded active exited Networking for netctl profile wlp2s0-Wolf
polkit.service loaded active running Authorization Manager
systemd-backlight@acpi_video0.service loaded active exited Load/Save Screen Backlight Brightness of
systemd-fsck@...\x2d38bc68d942fc.service loaded active exited File System Check on /dev/disk/by-uuid/1c
systemd-journald.service loaded active running Journal Service
systemd-logind.service loaded active running Login Service
systemd-random-seed.service loaded active exited Load/Save Random Seed
systemd-remount-fs.service loaded active exited Remount Root and Kernel File Systems
systemd-sysctl.service loaded active exited Apply Kernel Variables
systemd-tmpfiles-setup-dev.service loaded active exited Create static device nodes in /dev
systemd-tmpfiles-setup.service loaded active exited Recreate Volatile Files and Directories
systemd-udev-trigger.service loaded active exited udev Coldplug all Devices
systemd-udevd.service loaded active running udev Kernel Device Manager
systemd-update-utmp.service loaded active exited Update UTMP about System Reboot/Shutdown
systemd-user-sessions.service loaded active exited Permit User Sessions
systemd-vconsole-setup.service loaded active exited Setup Virtual Console
upower.service loaded active running Daemon for power management
[email protected] loaded active running User Manager for 1000
Furthermore, plugging in the ethernet cord after the computer has started doesn't connect to the internet, even when I have the ifplugd service running. I am forced to run:
sudo ip link set enp3s0f2 up
sudo dhcpcd enp3s0f2
However, I can't run these commands after the laptop wakes up from sleep since it no longer sees the ethernet interface.
I am thoroughly confused. Please help me.

It seems to be fixed after the kernel update. On an related note, I've switched from using dhcpcd to netctl. I've enabled netctl to automatically connect to the network using:
# systemctl enable [email protected]
# systemctl enable [email protected]
So when I check for the status of the ethernet profile, I get told that's it's inactive.
#netctl status ethernet-dhcp
netctl@ethernet\x2ddhcp.service - Networking for netctl profile ethernet-dhcp
Loaded: loaded (/usr/lib/systemd/system/[email protected]; static)
Active: inactive (dead)
Docs: man:netctl.profile(5)
But I turned off the wireless, so I must be connected to the ethernet, So how do I know which profile I'm connected to?

400GB Raid partition disappear -after file transfer from USB2 HD

Similar Messages

Maybe you are looking for