401 Error for all files after CF8 install?

After I install coldfusion 8 on windows server 2008 with IIS7, I get a 401 "Unauthorized user" error for every page, regardless of whether its a CFM page or not. When I uninstall CF8 the error goes away. Has anyone else had this issue? Is there a resolution?

I was getting the same "-36" error while trying to backup to a Lacie firewire external drive.
I had a lot of people telling me to re-format, erase, reinstall, run utility programs ... yada, yada, yada.
First off, test to see if it is the connection type (firewire). I reconnected the offending external drive via USB, restarted the drive and ... BINGO! ... all transfers went perfectly.
Once i knew it was the firewire connection and not the drive itself i simply unplugged my iSight camera (the only other firewire device connected to my machine), reconnected my external drive via firewire and the problem is now corrected.
Firewire buses seem to be very finicky things ... i would suggest eliminating all firewire devices from the machine (except, of course, the external drive you're trying to transfer to) and see if the problem goes away.
Like i said, i simply unplugged my iSight camera and the transfer to my external drive went perfect and my transfer rates went from an average of 4MB/sec to over 19MB/sec.
P.S. BTW - prior to the error and after i corrected the error by unplugging the iSight camera, my internal and external drives all checked out 100% on Disk Utility, Disk Warrior and TechTool Pro.

Similar Messages

Photos 1.0 not showing all images from Photos Library.photoslibrary folder/file after update install

I installed the update that changed my iPhoto to Photos 1.0, and the new Photos program is not showing all images from Photos Library.photoslibrary file/folder (not sure to call it file or folder since it is actually a folder with all my pics but it acts more like a file) after update install. The Photos Library.photoslibrary file/folder shows to be 55 gb in size, and it shows to be loaded into the photos program, but there are maybe a few weeks of pictures showing instead of a few years. Lots of pictures in the 55 gb are not showing for some reason.

No - iPhotos has not replaced anything - it is new and an addition - iPhoto is still on your system in the applications folder and still works just fine
Outlook is not supported by Photos - not sure if the support must come form Apple or MS as Photos uses a different interface to external packages than iphoto did
LN

Impossible to open .dtproje file after re-installing SQL Server Management Studio

Hi all,
today, after re-installing SQL Server Management Studio from a package downloaded from MS web site (SQLManagementStudio_x64_FRA.exe), I tried to open a SSIS package file via Visual Studio and I get a message stating that this type of project (.dtproj)
is not supported.
Here are the events that lead to this problem:
We have SQL Server 2005 installed on a server and are planning to migrate to SQL Server 2012.
1 - Earlier this year, to solve a problem that we had with the SSMS client, we installed SSMS 2012 client on my station.
At this point, it worked fine for SSMS and when I tried to access SSIS it converted the packages to SSIS 2012 and it worked fine too.
2 - Yesterday, I tried to access SSMS and I had the message that the test period had expired; at this point I could open a SSIS file.
3 - To solve the problem with SSMS we decided to re-install it. It worked fine for SSMS but now I am not able to open a SSIS file.
Do you have any idea of what the problem is and what should I do to solve it?
It seems that there are some SSIS component missing, how could I get them back?

You are welcome Sylviep,
Based on what I see you want to create BI projects (e.g. a SSIS project), thus it will be enough to install SSDT
which is part of the SQL Server installation media. I do not see why you would re-install SQL Server itself.
Arthur My Blog

Error when registring Provider after finished install the portal.

Error when registring Provider after finished install the portal.
Hi.. we are using Oracle9iAS 9.0.2.0.1, Sun Solaris 8.
Our problem is, after we finished installed the iAS, then open the Portal, and we tried to register a provider, we get these errors:
"You are not authorized to view this page"
"This component ID: 1068970504 has no existing versions - you need to create one first (WWV-01808)"
"Error : Failed to service the client. No further information available"
"Error: The XML parser encountered an Error, and could not complete the conversion for portlet id=6,343, it returned the following message: XML Parsing Error "
can anybody help?...Should we, after the installation, should install any patches?
Thanks.

Hi
When you boot from the install disk, before you proceed through the install screens, first go to the Installers menu, and choose Disk Utility. If the internal drive appears, select it and click Repair Disk. See if you get errors, and if Disk Utility is able to correct those errors. If the drive does not appear, you may have serious drive issues which another drive utility (such as DiskWarrior) may be able to correct, but it may be severe enough to necessitate replacing the drive.
Since you've already tried Erase and Install, can I assume you have a backup of any files you need? If not, if you have access to another Mac, can you restart the G5 in Firewire mode (restart with the T key held down) and connect it using a Firewire cable to your other Mac. If the G5's drive appears on the other Mac's desktop, copy across any files you need.
Matt

It should be possible to set default behavior for all file types

It should be possible to set a default action for all file types. I'm so tired of having to manually sit and say "save this file" because Firefail always defaults to "open with" and has disabled the "Do this automatically for files like this from now on."
And spare me the zealotry religious excuses for why its the fault of websites and not Firefail
''edited to remove swearing''

I do want users to have full control to be able to set any folder view they want by using Apply to Folders; I just want to set the initial/default view to Detail because that matches what the majority of my users want.
That is, what registry setting changes when I go to a picture folder, change the view to Detail, and click Apply to Folders? Having done that, I still retain the ability to change it to some other view and apply that to folders. But what registry setting
represents the change I just made when applying Detail view to all Picture folders.?
This settings is simple via GUI, but it is related a lot of registry keys, I made a test in my machine, capture the "Apply to Folders" process using Regshot tool (this is a small tool which can compare the regsitry changes after you change some
settings), and this is the result:
this is part of the registry changes, a plenty of registry keys and values need to be changed. hard to list them here. if you have interests, I recommend the tool Regshot, it can help you capture the regsitry changes.
NOTE: Please Note: The third-party product discussed here is manufactured by a company that is
independent of Microsoft. We make no warranty, implied or otherwise, regarding this product's
performance or reliability.
Yolanda Zhu
TechNet Community Support

How to update managed metadata column for all file in document library using powershell

Hi,
How to update managed metadata column for all file in document library using powershell?
Any help on it.
Thanks & REgards
Poomani Sankaran

Hi TanPart,
I have changed the code which you have give in order to get the files from SharePoint 2010 Foundation Document Library.But i am getting below error in powershell.
Property 'ListItemCollectionPosition' cannot be found on this object; make sure it exists and is settable.
Could you tell me which is the issues in it?
See the code below.
$web = Get-SPWeb http://ntmoss2010:9090/Site
$list = $web.Lists["DocLib"]
$query = New-Object Microsoft.SharePoint.SPQuery
$query.ViewAttributes = "Scope='Recursive'";
$query.RowLimit = 2000
$caml = '<Where><Contains><FieldRef Name="Title" /><Value Type="Text">Process Documents/Delivery</Value></Contains></Where>' +
        '<OrderBy Override="TRUE"><FieldRef Name="ID"/></OrderBy>'
$query.Query = $caml
do
    $listItems = $list.GetItems($query)
    $spQuery.ListItemCollectionPosition = $listItems.ListItemCollectionPosition
    foreach($item in $listItems)
        #Cast to SPListItem to avoid ambiguous overload error
        $spItem = [Microsoft.SharePoint.SPListItem]$item;
        Write-Host $spItem.Title
while ($spQuery.ListItemCollectionPosition -ne $null)
Thanks & Regards
Poomani Sankaran

Trying to resolve a "_OBJC_METACLASS_$_CDVCommandQueue" with MainViewControllers.a, MainViewControllers.o, 7 in total. Apple Mach-O Linker error for all 7. Thanks to any assistance.

Trying to resolve a "_OBJC_METACLASS_$_CDVCommandQueue" with MainViewControllers.a, MainViewControllers.o, 7 in total. Apple Mach-O Linker error for all 7. Thanks to any assistance.

No I didn't even read through your post, to long.
You said that "No matter what program I try to install, as soon as the installer opens it crashes". Were you talking about the install for this/these 3D programs or ANY program? As it is worded it sounded like ANY program. That tells me there is a problem with your Mac, software or hardware.
Now you say others install programs, which is it. Programs other then the 3D ones install or no programs install?
Could simply be your Mac is to old to run these programs and the installer knows that. You never said what model or year Mac it is.

CFCHART only works for pie, invalid attribute: autoAdjust Error for all other types

CFCHART only works for pie, invalid attribute: autoAdjust
Error for all other types.
Im just trying to render a simple bar chart, and it works on
the developer server, but not in production.
Any tips?
Dave

It's 7.0.2
But I have not tried this yet...
ColdFusion MX 7.0.2 Cumulative Hot Fix 2
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=kb400996
I'm worried that If I apply that hotfix, something else will
break :(
ANd I wont be able to un=do it, and I'm not able to
re-install CF if it all goes tits up.

Using an * for all file extensions in a class selection parser

Using iFS 1.1.9....
I have successfully gotten a custom document class created using
xml. I have used the following code to set up the parser, etc.
If I use a specific file extension like txt the parser will
upload the file as my custom class. However, if I use * for all
file extensions the parser uploads all files as Document class.
Here is what I am using:
<?xml version='1.0' standalone = 'yes'?>

<PropertyBundle>
<Update
Reftype='ValueDefault'>ParserLookupbyfileExtension</Update>
<Properties>
<Property Action = 'add'>
<Name>*</Name>
<Value Datatyupe = 'String'>
oracle.ifs.beans.parsers.ClassSelectionParser
</Value>
</Property>
</Properties>
</Propertybundle>
When the above is uploaded I can go into iFS Manager and see
that the parser has been registered with * as the file extention.
I then upload this:
<?xml version='1.0' standalone = 'yes'?>

<PropertyBundle>
<Update
Reftype='ValueDefault'>IFS.PARSER.ObjectTypeLookpByFileExtension
</Update>
<Properties>
<Property Action = 'add'>
<Name>*</Name>
<Value Datatype='String'>QualDocument</Value>
</Property>
</Properties>
</PropertyBundle>
If I have txt or some other extension for the Name in place of
the * and upload a document it will put the class as
QualDocument. If I have the * it defaults to Document.
Is there a way to have the parser make all uploaded documents
QualDocument instead of Document without doing this for each and
every possible file extension?
Thanks.

Using iFS 1.1.9....
I have successfully gotten a custom document class created using
xml. I have used the following code to set up the parser, etc.
If I use a specific file extension like txt the parser will
upload the file as my custom class. However, if I use * for all
file extensions the parser uploads all files as Document class.
Here is what I am using:
<?xml version='1.0' standalone = 'yes'?>

<PropertyBundle>
<Update
Reftype='ValueDefault'>ParserLookupbyfileExtension</Update>
<Properties>
<Property Action = 'add'>
<Name>*</Name>
<Value Datatyupe = 'String'>
oracle.ifs.beans.parsers.ClassSelectionParser
</Value>
</Property>
</Properties>
</Propertybundle>
When the above is uploaded I can go into iFS Manager and see
that the parser has been registered with * as the file extention.
I then upload this:
<?xml version='1.0' standalone = 'yes'?>

<PropertyBundle>
<Update
Reftype='ValueDefault'>IFS.PARSER.ObjectTypeLookpByFileExtension
</Update>
<Properties>
<Property Action = 'add'>
<Name>*</Name>
<Value Datatype='String'>QualDocument</Value>
</Property>
</Properties>
</PropertyBundle>
If I have txt or some other extension for the Name in place of
the * and upload a document it will put the class as
QualDocument. If I have the * it defaults to Document.
Is there a way to have the parser make all uploaded documents
QualDocument instead of Document without doing this for each and
every possible file extension?
Thanks.

How to get the file size (in bytes) for all files in a directory?

How to get the file size (in bytes) for all files in a directory?
The following code does not work. isFile() does NOT recognize files as files but only as directories. Why?
Furthermore the size is not retrieved correctly.
How do I have to code it otherwise? Is there a way of not converting f-to-string-to-File again but iterate over all file objects instead?
Thank you
Peter
java.io.File f = new java.io.File("D:/todo/");
files = f.list();
for (int i = 0; i < files.length; i++) {
System.out.println("fn=" + files);
if (new File(files[i]).isFile())
     System.out.println("file[" + i + "]=" + files[i] + " size=" + (new File(files[i])).length() ); }

pstein wrote:
...The following code does not work. Work?! It does not even compile! Please consider posting code in the form of an SSCCE in future.
Here is an SSCCE.
import java.io.File;
class ListFiles {
    public static void main(String[] args) {
        java.io.File f = new java.io.File("/media/disk");
        // provides only the file names, not the path/name!
        //String[] files = f.list();
        File[] files = f.listFiles();
        for (int i = 0; i < files.length; i++) {
            System.out.println("fn=" + files);
if (files[i].isFile()) {
System.out.println(
"file[" +
i +
"]=" +
files[i] +
" size=" +
(files[i]).length() );
}Edit 1:
Also, in future, when posting code, code snippets, HTML/XML or input/output, please use the code tags to retain the indentation and formatting.   To do that, select the code and click the CODE button seen on the Plain Text tab of the message posting form. It took me longer to clean up that code and turn it into an SSCCE, than it took to +solve the problem.+
Edited by: AndrewThompson64 on Jul 21, 2009 8:47 AM

Return The remote server returned an error: (403) Forbidden error for some file types

hi
am using below code to get the byte array
byte[] myDataBuffer = client.DownloadData((new Uri(sourceUrl)));
for source of type .txt/.jpg no problem with accessing.but the file type with .master/.wsp/.cs
it is returning "The remote server returned an error: (403) Forbidden error for some file types" Error.how can i get rid of this.please help me
Thanks in Advance

Hi,
It seems there is something wrong with your code, from your code the account and key are the same, because their appsetting name are the same.
string account = ConfigurationManager.AppSettings["StorageAccountName"];
//string account = CloudConfigurationManager.GetSetting("StorageAccountName");
//string key = CloudConfigurationManager.GetSetting("StorageAccountAccessKey");
string key = ConfigurationManager.AppSettings["StorageAccountName"];
string connectionString = String.Format("DefaultEndpointsProtocol=https;AccountName={0};AccountKey={1}", account, key);
return CloudStorageAccount.Parse(connectionString);
If you use CloudConfigurationManager.GetSetting, please consider set azure project as the startup project, if not, this value will be null, this resulted in solution being started as a web project that didn't run inside the Azure emulator. Since CloudConfigurationManager.GetSetting
tries to get setting by contacting Azure (or Azure emulator in this case), and it is not running, it returns null.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How do I save my CMYK font settings & make it avaliable for all files ?

How do I save my CMYK font settings & make it avaliable for all files ? (adobe PS indesign file)

Could you explain what you want to do a little bit better? CMYK and fonts aren't really related to each other.
Also, are you using Photoshop or InDesign?

We are running 3 batches parallel(a.ksh,b.ksh,c.ksh parallel ) .if a.ksh will complete then d.ksh will start('d' start when 'a' will terminate successfully) and we have to handle error for all jobs ( if some job got aborted during runtime) ?

we are running 3 batches parallel(a.ksh,b.ksh,c.ksh parallel ) .if a.ksh will complete then d.ksh will start('d' start when 'a' will terminate successfully) and we have to handle error for all jobs ( if some job got aborted during runtime) ?

Moderator Action:
You already asked this question, two days earlier.
https://forums.oracle.com/thread/2585158
Stay with your original post. Deliberate multiple posting is the same as spamming the forums.
This new post is locked.

How to make a category required for all files created within a folder

I've defined a category. It has attributes which have been flagged as required.
When I view the properies of a particular workspace (library), the category is shown as available to the workspace. However, the category is not shown as required. And the "required" checkbox is not clickable.
So .. how, from the OCS DHTML applet, do I make a particular category a required category for all files in a folder?

Perhaps the Category Attribute is not marked as "configurable" when it was created. You can check this by "switching into Admin Mode" and drilling down the Categories using "Manage Categories" link. Check if the category attribute is marked as configurable or not.
Ravikiran

Can't export as Html (Waiting for all files to be ready...)

Made a bunch of updates last night to a client site. Everything looks great except I can't export as Html. Had my sister try to export on her computer and we both get to 87%, then it permanently stalls, saying "Waiting for all files to be ready" (See screenshots). We've ensured that no files are open or being previewed. We've rebooted and tried saving to a different location, all with no change, we still get to the 87% mark and stop. Please help. I have a client waiting for this site update.
Details:
Windows 7
Sony Vaio
Muse Version - 4.1 Build 8 *see screenshot
****Update:
I can preview the entire site in a browser as well as preview each page individually, but cannot finish a html export past 87%.

Odd are if you wait long enough, potentially a few hours, it will complete.
This huge performance hit sounds exactly like a bug that's fixed for the Muse CC 5.0 release due out next week. Sorry for the inconvenience.

401 Error for all files after CF8 install?

Similar Messages

Maybe you are looking for