403 Error during communication with System Landscape Directory from RWB

Hi,
I've got a new install of PI (XI 7.0) SPS 10 and am getting an error whenever I try to access the SLD from RWB or Integration Builder. The SLD is running on the same server as XI.
I've been through the various config guides (strangely there doesnt seem to be one specifically for PI/XI 7.0), to configure RFC destinations, checked users are not locked etc.
I'm thinking it's probably a VA / Authorisations issue, but could use some ideas!
Here's a few errors just for reference (and future people searching!)

Error during communication with System Landscape Directory: HTTP response code: 403 (Forbidden)
Unable to read XI domain from the SLD. Monitoring cannot therefore be configured. Error message: com.sap.aii.rwb.exceptions.BuildLandscapeException: Error during communication with System Landscape Directory: HTTP response code: 403 (Forbidden)
No System Landscape Directory exists. Unable to generate the landscape
Unable to read software component versions from System Landscape Directory "my.server:51400" (have tried 8014 also)

Thanks,
James.

Hi,
1) Activated all services
2)Go to SU01 > type PIISUSER and reset the user's pw
Check out this might be helpful
http://help.sap.com/saphelp_nw04/helpdata/en/89/05793c05f0807be10000000a11405a/content.htm
403 ERROR
Check this note might help you 961880
Regards
Agasthuri Doss

Similar Messages

Error during communication with System Landscape Directory: HTTP response c

Dear all,
I have redirected a SLD to our Q system. Everything in the Repository is working fine. What did I do:
- Adjusted settings in SLDAPICUST
- Adjusted SAPSLDAPI
- Adjusted LCRSAPRFC
- Adjusted the following values in the Exchange Profile:
com.sap.aii.connect.cr.httpport
com.sap.aii.connect.cr.name
com.sap.aii.connect.landscape.httpport
com.sap.aii.connect.landscape.name
So, SLDCHECK works fine.
The Repository sees the right SLD.
However, in the Directory I cannot choose an Adapter Engine (leaves blank) in my comm. channel.
Then I went to the RWB and got the following message:
Error during communication with System Landscape Directory: HTTP response code: 403 Forbidden
Where can I change something to make this work? Is this a user verification problem?
Thanks in advance for your input.

go through the notes :-
#764176 Error in XI due to inconsistent SLD contents
#720717 Reduce the number of System Landscape Directories
Regards
Kenny

System Landscape Directory: HTTP response code: 403 (Forbidden)

Hi,
After upgrading PI 7.1 (with local SLD) Stack06 -> Stack09 we have the following error in the runtime workbench. It seems that the connection
between PI and SLD is not working:
1) error in RWB -
Error during communication with System Landscape Directory: HTTP response code: 403 (Forbidden)
2) another error:
8 Message(s) : SLD agent unable to specify domain - Error class com.sap.aii.rwb.exceptions.BuildLandscapeException: Error during communication with System Landscape Directory: HTTP response code: 403 (Forbidden) - Attempt to create JCo connection object failed for domain domain.00.hfasapxi1 - Integration Server unable to specify a JCo client - No component names available from Integration Server - SLD agent unable to specify domain - Error class com.sap.aii.rwb.exceptions.BuildLandscapeException: Error during communication with System Landscape Directory: HTTP response code: 403 (Forbidden) - Attempt to create JCo connection object failed for domain domain.00.hfasapxi1
3) in the sld:
INFO com.sap.sld.api.builder.app.DefineHostedSystem: Communication exception in SLD ping (HTTP 403 = FORBIDDEN): http://hfasapxi1:50000/sld/cimom, namespace sld/active.
sldcheck is working and the users are not locked or not valid. All seems to be ok but I still get these errors.
Any idea ?
Dimitry Haritonov

Hi Venu,
thanks for the answer but it seems to be something else. After searching for that problem I also ran the configuration wizard->PI self registration. This activity registers all the component of the PI, unfortunately it only registered the "integration server" part without the Adapter engine, domain, RWB and etc.
Also, when I trigger the registration of the adapter engine I get the following error in the default trace:
The AdatperEngine has not been registered with the SLD due to: com.sap.aii.af.lib.sld.SLDException: Could not register AdapterFramework to SLD. Reason: Self-registration of instance af.xid.hfasapxi1 of class SAP_XIAdapterFramework failed
the reason is unknown ... any idea ?
Dimitry Haritonov

System Landscape Directory is not accessible

I am trying to get my end to end monitoring working but every time I try to log in and display it asks for a user and password and no matter which user I try it tells me i have no authorisations...
So someone suggested that I goto /nwa to implement the template...
When I go there and put in the user and password it comes up with System Landscape Directory is not accessible.
Does anyone know why this is? or what can fix it?
NOTE: It is worth mentioning that the SLD can be accessed by the IR and ID... and I can go on to the SLD directly so I don't understand this issue...

Hi,
>>>>Also I am on a PI system so should it be PIISUSER?
yes
you can also check for errors from VA
/people/michal.krawczyk2/blog/2005/09/07/xi-why-dont-start-searching-for-all-errors-from-one-place
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

System Landscape directory not available error,

I am still a beginner, and I am having some slight trouble understanding, what tools would be needed, and how to install. I am using the forums.
We have the MII Discovery Server up and running.
NWDS Server installation is done.
We have the MII track ready to be used for Development(SLD URL is available) , Userid and password available
I am working on installing the NWDS 7.3 Developer Workspace.
Would I also need to do NWDS Server install on my laptop?
Would these steps be sufficient?
1. Download and install JDK 1.6
2. Copy the file nwds-extsoa-7.3-SP00-PAT0000-win32.zip from:
<your download location>\51039309\DATA_UNITS\JAVA_IDE\distros\com.sap.netweaver.developerstudio.distribution.complete.extsoa\8.30.0.101020102100
to a convenient folder.
3. Extract the content and you will have a folder with name eclipse.
4. Launch the Netweaver Developer Studio from folder eclipse, you may want to create a shortcut on the Desktop.
5. If you haven't maintained JAVA_HOME property or if it's pointing to some other java version, eclipse will complain about it. In the dialog window locate the JDK 1.6 installation. Path to JDK 1.6 should be something like
C:\Program Files\Java\jdk1.6.0_25\bin
6. Restart the NWDS after this and select a suitable workspace.
7. Set the run time engine in NWDS, by going through the menu path:
Window->Preferences->SAP AS JAVA
Question:
1. I am unable to Set the run time engine in NWDS, please could you give me details steps with what I would need to enter for Instance Hostname and Instance Number...etc
2. As part of Development installation do I have to Modifying the Logon Page? Do I have to go thru the Server installation in order to start developing on eclipse environment?
I do not have the war file. How do i Copy the war file tcsecumelogonui.war from
<Installation drive>:\usr\sap\<SID>\J00\j2ee\cluster\apps\sap.com\com.sap.security.core.logon\servlet_jsp\logon_ui_resources\tcsecumelogonui.war
3. System Landscape directory not available error,
In the Component Browser when I right click and select New u2013 Development Configuration u2013 Import From System Landscape Directory (SLD) u2013 Next (Enter UserID and Password)
Thank you

Hello,
For the SLD error, please, configure SLD following as per this docuemtnation:
http://help.sap.com/saphelp_nw04/helpdata/EN/bb/c2b6421a75da11e10000000a155106/frameset.htm
Regarding the settings to enter NWDS to connect to AS Java, you have to enter the java instance data so that NWDS can connect to it in order to make deployments, etc....
Please, see also the following documentation that explains stp by step how to work with NWDS.
http://help.sap.com/saphelp_nw04/helpdata/en/fe/a3996fa314f94f8a0c3475b08636d0/frameset.htm
I hope this helps you.
Regards,
Blanca

Trouble accessing System Landscape directory

Dear Gurus,
I am currently setting up the System Landscape Directory (SLD) on the Solution Manager 4.0 system. I have managed to access the main SLD page using http://server:8000/sld, however when I click on the Adminstrator link, and then eg. 'log'. I will get this message:
500 Internal Server Error SAP J2EE Engine/7.00
Application error occurred during the request procession.
Details:
com.sap.engine.services.servlets_jsp.server.exceptions.WebIOException:
Error compiling [/admin/log.jsp] of alias [sld] of J2EE application [sap.com/com.sap.lcr].
Exception id: [000C29B5E9430058000000320000226800045399F55C32B9]
There are several other links in the SLD Administration that does not work and will incur the same error message as above:
details.jsp
systemmessage.jsp
and many others. I have checked in visual admin and all application s are up. Please advise on my current situation.
With Many Thanks and Best Regards.

Hi,
You dont have to create this user in the system.This is the defualt user created during installation. You will find this in the
001 client. Also to change the password u can use visual admin
or http://ip:5xx00/nwa use j2ee_admin here and login then change the password for the sld user.
Regards,
Vamshi.

You do not have permission to view the System Landscape Directory.

Hello there,
When I accessed my SLD from portal, it took me to the page but kept saying:
- You do not have permission to view the System Landscape Directory. Minimum required: UME role with permission com.sap.lcr.LcrUser and J2EE role LcrUser. See the SLD Post-Installation Guide for details
- SLD not configured; configure the SLD in Administration first.
I searched on these forums for the above error. Got some results, but nothing really substantial that has helped/fixed my problem.
I also read a bit on SLD from the pdf file named: System Landscape
Directory of SAP NetWeaver 2004s
I also worked on the security roles and actions to individual
users or user groups like for ex: the above pdf file advised I map the security roles from Visual Administrator, to the created roles in the portal. I've done that too. Like create a user group: 'SAP_SLD_ADMINISTRATOR' and create a user role corresponding to it, which would be: 'LcrAdministrator'
Then, I went to visual administrator, and clicked on 'Assign User Groups to Roles'
Even after this, I tried to access the SLD from portal: It is still giving me the same error I mentioned above in bold italics.
Can somebody please help me how to fix this issue?
Thanks
Dino.

Graham:
Thank you very much for making the effort to reply to my query.
But, it still hasnt solved my problem yet.. for some reason even though I followed your instructions and did what you advised.
I have attached a screenshot of my Visual Administrator screen that you advised me to modify/change.
Here it is: http://img166.imageshack.us/img166/2259/screenshot002co1.jpg
After I made the changes, I restarted the J2EE server and went to my portal SLD page: [http://org-x:50000/sld]
Tried authenticating usernames: LcrAdministrator and Administrator.
Both attempts resulted in the same error show below:
- You do not have permission to view the System Landscape Directory. Minimum required: UME role with permission com.sap.lcr.LcrUser and J2EE role LcrUser. See the SLD Post-Installation Guide for details
- SLD not configured; configure the SLD in Administration first.
I am wondering, if you would have another workaround regarding this issue, can you please let me know?
Thanks
Dino.

Unable to read software component versions from System Landscape Directory

Hi XI,
Once I could import software component version but now I can't. Maybe I did something wrong in SLD.
Could you please give me some hints?
Thanks,
Bruce

hi,
i have also problem with "import software componenet version "
i got a message like
"unable to import software component version from
system landscape directory ......."
than i gone for SLDCHECK...i got an error it is ............
calling function LCR_LIST_BUSSINESS_SYSTEM
Retreiveing data from the sld server function call returned exception code 4
connection to sld does not work
check sld function and configuration
what that i have to do ...to make it work ....please give me any solution for that please give me detailed info
with regards
Edited by: praneeth mamgunta on Jun 27, 2008 4:04 PM
Edited by: praneeth mamgunta on Jun 27, 2008 4:07 PM

Unable to read software component version from System Landscape Directory "

I've worked in past creating/importing SWCV, but this is new system PI7.0 and stuck.
A) Is my understanding on resolution correct?
Should I go and apply notes 940309 and create client copy of existing client 001
 OR
change role of client 001; SXMB_ADMIN -> 'Integration Engine Configuration' to 'Integration Server'
I have no problem in using client 001 as Integration server, all I want is import of SWCV to work. Thanks. Appreciate the help.
B) Here is what I have done and the error:
1) Followed weblog below and created product, software component, technical system, business sytem in SLD.
/people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-i
2) When I import the SWC from integration repository getting error
(Unable to read software component version from System Landscape Directory "server:5<system number>00").
C) Pointers used from the forum to debug the issue, but still no luck
Below are the points checked from the forum and all steps are correct, but still have issues with the import
1) check the RFCs SAPSLDAPI, LCRSAPRFC, connection test pass as the program ID registered with Jco
2) T-code SLDCHECK no errors (followed http://help.sap.com/saphelp_nw04/helpdata/de/78/20244134a56532e10000000a1550b0/content.htm)
3) T-code SLDAPICUST got user PIAPPLUSER, pwd is correct (reset the pwd)
4) logged using PIAPPLUSER http://server:port/sld and it works
5) One of the weblog SLD Check Failed (LCR_LIST_BUSINESS_SYSTEMS function doesn't work) referred to apply notes 940309
Notes: 940309
You are installing 'SAP NetWeaver 2004s SR1 ABAP+Java' Usage Type 'NetWeaver Process Integration (PI)'.
You don't want to use the default client 001, but another client as Integration Server.

applied portion (PIPostInstallProcess) of OSS notes 940309 and it resolved.
Note:
I still retained client 001 and didn't do client copy as mentioned in the notes. The wizard based CTC tool helped. Here are the details if someone has similar issue and want to know further details:
A NetWeaver Process Integration (PI) Installation (ABAP+Java) has two parts: Installation and configuration. The former is done by the Installer, the latter by the 'Central Template Configuration' (CTC) Tool.
http://help.sap.com/saphelp_nw04s/helpdata/en/14/39084136b5f423e10000000a155106/frameset.htm
1. Call the wizard-based configuration tool as described in Configuration Wizard.
 2. Select the scenario PI and the task PIPostInstallProcess.
 3. Choose Execute.
A list of the steps to be executed by the wizard is displayed.
 4. Choose Install.

Could not get system landscape directory client - NWDS 7.31 SP 09

Hi Experts,
We are unable to import development configurations from NWDI 7.4 to NWDS 7.31 for one of the developer's id. Other developers are able to import the
configuration successfully in NWDS and are able to create projects without any issues. In fact, I am able to import the development configurations from his Id on my machine.
The error message that is appearing is as follows: Could not get system landscape directory client.
PFB the NWDS logs:
null
Error
Tue Jan 06 12:48:58 IST 2015
List Development Configurations failed [Error: com.sap.ide.dii05.ui.internal.sld.SldContext Thread[ModalContext,6,main]]
com.sap.lcr.api.cimclient.LcrException: com.sap.lcr.api.cimclient.CIMClientException: HTTP response code: 407 (Proxy Authentication Required ( Forefront TMG requires authorization to fulfill the request. Access to the Web Proxy filter is denied. ))
at com.sap.lcr.api.cimclient.HttpRequestSender.newClientException(HttpRequestSender.java:719)
at com.sap.lcr.api.cimclient.HttpRequestSender.processResponse(HttpRequestSender.java:608)
at com.sap.lcr.api.cimclient.HttpRequestSender.send(HttpRequestSender.java:352)
at com.sap.lcr.api.cimclient.CIMOMClient.sendImpl(CIMOMClient.java:205)
at com.sap.lcr.api.cimclient.CIMOMClient.send(CIMOMClient.java:153)
at com.sap.lcr.api.cimclient.CIMOMClient.enumerateInstancesImpl(CIMOMClient.java:450)
at com.sap.lcr.api.cimclient.CIMOMClient.enumerateInstances(CIMOMClient.java:754)
at com.sap.lcr.api.cimclient.CIMClient.enumerateInstances(CIMClient.java:989)
at com.sap.lcr.api.sapmodel.JavaCIMObjectAccessor.enumerateInstances(JavaCIMObjectAccessor.java:213)
at com.sap.lcr.api.sapmodel.SAP_DesignTimeConfigurationAccessor.enumerateInstances(SAP_DesignTimeConfigurationAccessor.java:164)
at com.sap.ide.dii05.lib.internal.sld.SldBasicContext.listRemoteDevConfNames(SldBasicContext.java:197)
at com.sap.ide.dii05.ui.internal.devconf.wizard.DevConfImportSldPage$6.run(DevConfImportSldPage.java:293)
at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:121)
NWDS version: 7.31 SP 09
Error Screenshot -
Any pointers will be highly appreciated.
BR,
Anurag

Hi,
we had some issues recently with this, and the trace also mentions proxy issues. Could you please try direct connection in that preferences (in other words do not use proxy settings in NWDS) ?
Is it possible that there is some kind of web-filter application installed that is blocking the request?
I'd suggest to google for this error:
407 (Proxy Authentication Required ( Forefront TMG requires authorization to fulfill the request. Access to the Web Proxy filter is denied. ))
Perhaps the problem is not even sap related.
Is Microsoft Forefront TMG (Threat Management Gateway after some googleing) perhaps configured in the way that it is not allowing this request ? Perhaps the IT guys of your company could look into this.
Microsoft Forefront Threat Management Gateway - Wikipedia, the free encyclopedia
12209 Forefront TMG requires authorization to fulfill the request. Access to the Web Proxy filter is denied.
Cheers,
Ervin

System Landscape Directory server not started

Hi,
We are running Solution Manager 4.0 SP13.
When I log ito the NWA get the message : System Landscape Directory server not started
We are trying to configure CEN but only the Local System can be administered.
If I goto the Central SLD and login - Administration - Server Started.
If I look at the ABAP - Transaction SLDAPICUST - save configuration - all ok
I goto the Jco Connectors and ensure all Jco Connections are configured: SAPSLDAPI_SID
ABAP RFCs; All configured
ABAP - Transaction - sldcheck .. it returns with success.
I login to the ABAP stack - smgw - logged in clients and all Jco Connections are available
I go into the J2ee Admin - navigate to the SLD Data supplier - all tests return success.
The SLD CIM is version 1.5.20
The application com.sap.engine.class.download is started ( Note 1017526 )
However when I login to with the J2ee_admin tool the following is missing from the CIM Client:
sap.com/tclmwebadminmainframewd/webdynpro/public/lib/app.jar
sap.com/tclmwebadminsldwd/webdynpro/public/lib/app.jar
Please help.

Hi Anand,
I verified the SLD Post Processing doc in case I missed something. The doc I used:
https://websmp106.sap-ag.de/~sapidb/011000358700003772372006E
I went through every point in the doc and verified that it was completed .
If I open Monitoring Setup Guide for SAP NetWeaver 7.0 SP Stack 12 ( Can't find 13 ) I go to page 68 :
6.5.2. Configuring the Connection Between CEN and the SLD ... I have followed all the steps without any error.:
I followed it Step-by-Step.... however the following CIM Client Genearations do not exist:
sap.com/tclmwebadminmainframewd/webdynpro/public/lib/app.jar
sap.com/tclmwebadminsldwd/webdynpro/public/lib/app.jar
What is available and Activated :
sap.com/tclmwebadminmainframewd/webdynpro/public/lib/sap.comtclmwebadminmainframe~wd.jar
sap.com/tclmwebadminsldwd/webdynpro/public/lib/sap.comtclmwebadminsld~wd.jar
I alos Decided for the purpose of Troubleshooting to Activate All:
sap.com/tclmwebadmin~mainframe.......
sap.com/tclmwebadmin~sld..........
When I go into NWA .. its still says SLD Not started.
If I go inot the J2ee Admin Tool - SLD Data Supplier - Trigger Data Transfer OK
I goto the SLD - Administration . SLD Started
I Can see all the Techinical systems - ABAP and Java.
All business Systems are there
SLDCHECK works fine .. no errors !
But I can't change the status of the NWA System Landscape Selectipon From Local to Central.
Warning / Error :
System Landscape Directory server not started
and
Only local system can be administered
I maybe missing something but I can't see what it is....
Further Help required !

URGENT: connection to system landscape Directory (SLD) could not be openend

Hi ,
information: when login as adminstrator yesterday, it asked for a new password & i given a new password to the administrator
Error in portal: Failed to resolve JCO destination name 'WD_GPMS_RFC_METADATA_DEST' in the SLD
My Findings
1) http://...../sld , given j2ee_admin, pwd .
then clicked on Administration --> showing --> status running.
2) Logged into portal with j2ee admin , CA --> web dynpro ,
Create Jco Destination , Maintain JCo destinatations , start assigned SLD are in the disabled mode.
Check SLD Connection is in enable mode.When clicked on test connection ,
it is giving the following message :
connection to system landscape Directory (SLD) could not be openend successfully.
3) Also CIMClient test giving failed .
With Regards,
NSM

Hi Nikil,
i had seen your reply after i had resolve the issue by my own. As my administrator password got changed, i had changed SLDDSUSER password. Both adminstrator password & SLDUSUSER password should be same.
(any how iam rewarding you with points as mostly it is correct answer)
Thanks
Hussain.

Error while communicating with the server

Hi Experts,
I'm having the following issue, when I try to send data using an input schedule the server says that there was an error while communicating with the server and don't send the data, I took a look at the log file and it says the following,
==============[BPC Logging]==============
[Message Type] : ERROR
[Job Name]     : OSoft.Services.Application.FileAccessService.FileAccessServiceProxy
[DateTime]     : 4/6/2011 8:42:44 AM
[UserId]       : CAMESAP\BPC_SYSADMIN
[Message]       : UJF_EXCEPTION E018     Cannot find document/directory 0
==============[BPC Logging End ]==============
Also i went to take a look at the default script logic, because i remember that this error happened to me when i wrongly program an script logic in the default.lgf but it shows me the following error when I open it,
System.InvalidCastExeption: Specified cast is not valid
at System.data.DataColumnCollection.get_Item(String name)
at System.data.DataRow.get_Item(String columnName)
at Osoft.Consumers.Admin.AdminLogicClient50.LogicMain.GetLogic()
If I compile the file, the error stop appearing, put with all new logic files it happens at first, I think that these two errors are very deep related, if anyone can help me will be very appreciated,
Thanks in advanced

Hi,
I have faced the similar kind of problem in BPC NW 7.5 SP5.
The main reason is when you are trying to send any data via input schedule, you will get this web server communication issue.
1) Check if any thing you are calling script logic under default.LGF. Exclude the logic out from default and test it.
2) Process all the dimensions in application
3) Perform Lite optimization and check are there any errors.
4) Finally check BPC COM+ services and check if any service stopped and also check osoft send governer service in microsoft services.
5) Diagnoise usign server manager.
6) Try input some thing in apshell and check if u face the same web server communication error?

Connection to system landscape directory (SLD) could not be opened succesfully

Hello SAP Gurus,
I got the follow wrong with MSS main page: ERROR: Exception condition "COMMUNICATION_ERROR" triggered (termination: RABAX_STATE)
I was checking SLD connecton between sap portal and SLD, but i show me ad "Connection to system landscape directory (SLD) could not be opened succesfully"
User SLDDSUSER, is no lock.
Enclose pictures.
Best regads.

Hi Andres,
You need to check the below things.
1. Try to do telnet from portal server to the SLD server
   telnet svrsapnpd.minedu.gov.co 50000
   I hope this will not work, if its work then you have to check the user administrator.
2. If the SAP netweaver version is 7.0x
   Open the visual admin-->select services and check the SLD Data Supplier service
3. If SAP Netweaver is 7.1,7.3 and above
open the nwa -> goto destination and check the SLD_DataSupplier and SLD_Client
With Regards
Ashutosh Chaturvedi

SolMan 4.0 Install fails at Configure System Landscape Directory

Hi
We are installing Solution Manager 4.0 on AIX 5.2 and DB2 8.2.4. At step 56 (Configure System Landscape Directory phase) the install fails with the following error:
TYPE=A STATE=503 INFO_SHORT=Error connecting to
http://sapibm7:50100/ctc/ConfigServlet?param=com.sap.ctc.util.SLDConfig;IMPORT_SLD_CONTENT;FILENAME=/usr/sap/SOL/SYS/global/sld/model/CR_Content.zip,HOST=sapibm7,PORT=50100,SLDUSER=J2EE_ADMIN,SLDPASSWORD=des19(92|18|146|163|51|195|178|104|235|). The provided user data might be incorrect or user might be locked. CONFIGURATION=
The user J2EE_ADMIN can logon to via the gui to client 001 without errors.
Any help would be appreciated.
Thanks
Sam

Hi Sam,
Seems this is a typical problem with SAP J2EE /AddIn Installations (I had this often!!). The user is created in the J2EE user store but because his password is initial, the J2EE engine would not let him in. As I remember the installation tries to log on with user SLDDSUSER (or so, something with SLD...), so log on on to the J2EE Engine with this user (e.g http://<hostname>:<port>/useradmin) and you will be prompted to that your password is initial (also do this with user J2EE_ADMIN, always good idea to see that J2EE Engine works correctly). In most cases the configuration of the SLD will continue.
If this doesn't work, cancel the installation and configure the SLD manually (is no problem, because at that point of the installation procedure, the system is fully installed, except the SLD configuration).
Hopes this helps.
Regards
Daniel

403 Error during communication with System Landscape Directory from RWB

Similar Messages

Maybe you are looking for