404.3 error CFMX7 and Win 7

Surprised I cannot find any discussions about this other than an unanswered one from 2007 and no replies.
I have just installed CF7 on a Boot Camp MacBookPro. Running SQL 2000.
Yesterday I had CF working fine using the Admin console to set up SQL 2000 connections ... but when I tried a local dev web site, I got the 404.3. Unable to determine how to add MIME for cfm in IIS 7, decided to reinstall CF7.Thinking that CFM would talk natively to IIS and configure itself.
Wrong.
After reinstalling, I go to the CF Admin panel and get the 404.3 eror.
Can someone tell me how to add this MIME type, if that is a real error message?
Many thanks.
Robert

Thank you for your reply ...
1. Is IIS Metabase and IIS 6 configuration compatibility feature installed?
Absolutely no idea. How would I know?
2. Did you configure CF to use IIS instead of the built in web server?
When installing we told it to configure for all IIS web site.
3. Try installing the CF9.0.1 update, improved support for IIS 7 is advertised as feature of this update.
May have lied ... We're using IIS 6.1 build 7600.
This DID work yesterday ...
We were running CFMX7. SQL 2000. Brand new install. We could bring up the Admin panel but could NOT connect to any db's. After working on it for a day we finally for the db connections going - no idea how - after a reboot. All was ok .. but when we tried to load an application of ours as a sub site, we got this error. We got nowhere so we decided to reinstall MX7. Which is when we got this error on even the Admin screen. So we decided to clean up ... Uninstall MX7. And instead download CF9 eval and install that after reading notes that said it had a cleaner install on Windows 7 and IIS 6. But still get the 404.3 error.
Going to lunch; will read your URL pointers and resume later ... thank you for your ear!
Robert

Similar Messages

404 Error in Live View

I apologize in advance for being a noob. When I hit inspect or Live View I get a 404 error page and not my site.
I have defined a testing server and when I test it says my connection is good. I have no idea where to go from here.

missys_bits wrote:
The url is www.aircarecitrus.com As you can see, there is something on the ftp because from there you get an index page.
I get a 404 error when I try to test from within DW. I am sure there is an issue on how I have named a file or something, I'm just not sure where to look to figure the whole thing out.
Ignore my previous post. I just re-read your post and highlighted 2 things. Are you trying to use the remote server and the testing server as one?

I keep trying to download Photoshop CS3 and a get a 404 error page, does Photoshop CS3 not working with a new Mac operating system?

I keep trying to download Photoshop CS3 and a get a 404 error page, does Photoshop CS3 not working with a new Mac operating system?

you must also use a browser that allows cookies. try a different browser or download from adobe.com
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5.4 (win), 5.4 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

404 error on iPad and iPhone

I have an old site converted from GoLive to Dreamweaver. There is a password protected area on the site. The script for the password was created with GoLive and imported to DW.
When trying to access the password protected page on iPad or iPhone there is a 404 error. If you type in the url addy the page loads.
coloradocorgi.org
password link at bottom of page
coloradocorgi.org/pemmy.html
page linked to the password
Is there any way to keep the password protected functionality on iPhone and iPad?
(I'm currently on DW CS6 and Mac OS 10.8.5)
TIA
Ziska

Javascript is the worst way to do any kind of password protection because everything is "client-sided", if you know where (and how) to look, you can easily gain access to the UN/PW to enter a restricted page, or bypass it all together.
A much better route to go would be to password protect a folder on your website via your hosting company. Most hosts will give you the ability to set the password protection on a folder by folder basis right through your Admin control panel. That password protection is controlled by the server, not the user's browser, so it is much, much more secure.
Attempting to update a script created by GoLive so it works on a device that was invented after GoLive was killed is probably an exercise in futility.

SAP GUI and Win 7 error when attaching a document

I searched Google multiple times for an answer but didn't find one, so I'd like to bring it up in this forum.
I start by saying that mine is a large corporation with centralized application, Windows and security configuration, so I have very little manuvering as far as changing settings.
The problem we run into is as follows:
some users who use a particular (Quality Assurance) module of SAP need to regularly attach documents (typically PDF format) in SAP. The typical size of an attachment is between 3-7 MB.
Those documents are store on a network file share remote to the site. The network latency between the site and the file share location is approx. 6ms (not huge by any means). Users are running Win 7 Enterprise SP1.
Randomly, the attachment download fails in SAP and they have to exit and log back in to SAP to resume. The attachment may fail2-3 times, and then succeed or fail permanently.
Copying the file to a local drive (C:) and then attaching it in SAP always works.
The users report that this was not an issue when they were using WinXP SP3 a few months back.
Again, the problem is random in that it cannot be recreated at will but happens often enough to be more than just an inconvenience.
the Windows event log logs the following message when the attach process fails and SAP freezes:
The program saplogon.exe version 7300.1.2.1080 stopped interacting with Windows and was closed. To see if more information about the problem is available, check the problem history in the Action Center control panel.
Process ID: a7c
Start Time: 01cf38c9a86d55ac
Termination Time: 16
Application Path: C:\Program Files\SAP\FrontEnd\SAPgui\saplogon.exe
Report Id: 139b5ba9-a4bd-11e3-8b65-d8d3857a05c5
I'd appreciate any input that would help resolve this issue.
Steve

Besides updating the patch level, the other thing you can try to get more information is turn on or increase the level of tracing within the SAPGUI. You can do this on the workstation in SAP Logon by clicking the little button at the upper left of the window title bar, then in the drop-down choose Options. In the new window that opens go to the Traces folder and have a look through the three different kinds of traces you can turn on. Probably you should turn on SAP Logon Traces to the "Errors" level, and same for SAP GUI Traces (to Level 1: Errors), and under Session Traces pick the options that make sense to you (perhaps "Access Control", "Office Integration", and/or "Security"? You might need to experiment with different options to get the right combination that doesn't overload the trace file with noise; you may not need a Session Trace at all if the error trace on the other two options reveal what's wrong).
You can see under Session Traces what folder the trace files will go to, and open the folder from there. By default it will be C:\Users\<username>\AppData\Local\SAP\SAP GUI\Traces.
Best regards,
Matt

I updated an iPod touch, an iPad 2, and an iPhone 4 to iOS 6, and all of them now will not connect to WiFi. They all give this wierd 404 error page from Apple and insist that I need to login to the network. Bad job testing the software Apple.

I updated an iPod touch, an iPad 2, and an iPhone 4 to iOS 6, and all of them now will not connect to WiFi. They all give this wierd 404 error page from Apple and insist that I need to login to the network. What's the fix? None of the recommended fixes work in any of these devices. Reset device, reset network, renew lease, etc. None of them work.

Does the iPod work OK?
Does it charge when connect to the computer?
Does it appear in My Computer?
Look at the dock connector on the iPod. Compare with the iPod that does work/connect.
I suspect you have a 2G iPod. Those can only go to iOS 4.2.1
http://support.apple.com/kb/HT1353#iPod_touch_late2009
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

Download older version of a file from SharePoint Document Library using CSOM and 404 error

Hi,
I am trying to download previous versions including Major and Minor versions of documents from SharePoint Online using CSOM. I get 404 error when I try to download the file. I found several posts on various discussion forums where people are getting same
error but none of those have any solution/answer. Below is one of the threads and sample code I have tried that results in 404 error. If I use the link in browser directly, I am able to download the file. Also I am able to download the current version of file
using CSOM without any problem, it is only the older versions that give me 404 in CSOM.
http://qandasys.info/how-to-download-the-historical-file-version-content-using-csom/
public int GetStreamFromFile(string docid, string lib, string fileurl, ClientContext clientContext, int iuserid, string Version, bool isCurrrent)
if(!isCurrent)
List LibraryName = clientContext.Web.Lists.GetByTitle(lib);
clientContext.Load(LibraryName);
clientContext.ExecuteQuery();
CamlQuery camlQuery = new CamlQuery();
camlQuery.ViewXml = "" + fileurl +
Microsoft.SharePoint.Client.ListItemCollection collListItem = LibraryName.GetItems(camlQuery);
clientContext.Load(collListItem, items => items.Include(item => item.Id, item => item["FileLeafRef"], item => item["LinkFilename"],
item => item["FileRef"], item => item["File_x0020_Size"], item => item["DocIcon"], item => item.File.Versions));
//clientContext.Load(collListItem);
clientContext.ExecuteQuery();
foreach (Microsoft.SharePoint.Client.ListItem oListItem in collListItem)
//string fileurl1 = (string)oListItem["FileRef"];
//string filename = (string)oListItem["LinkFilename"];
foreach (FileVersion version in oListItem.File.Versions)
if (Version == version.VersionLabel)
//Added excutequery to get object one more time as per blog
//http://social.technet.microsoft.com/Forums/de-DE/sharepointdevelopmentprevious/thread/88a05256-8694-4e40-863d-6c77512e079b
clientContext.ExecuteQuery();
FileInformation fileInformation = ClientOM.File.OpenBinaryDirect(clientContext,version.Url);
bytesarr = ReadFully(fileInformation.Stream);
Darwaish

Hi,
According to your description,
I know you want to get older version of a file from SharePoint Document Library using Client Object Model.
The following code snippet for your reference:
public void GetVersions()
ClientContext clientContext = new ClientContext(“http://SPSite”);
Web site = clientContext.Web;
clientContext.Load(site);
clientContext.ExecuteQuery();
File file = site.GetFileByServerRelativeUrl(“/Shared Documents/mydocument.doc”);
clientContext.Load(file);
clientContext.ExecuteQuery();
ListItem currentItem = file.ListItemAllFields;
clientContext.Load(currentItem);
clientContext.ExecuteQuery();
FileVersionCollection versions = file.Versions;
clientContext.Load(versions);
clientContext.ExecuteQuery();
if (versions != null)
foreach(FileVersion _version in versions)
Console.WriteLine(“Version : {0}”,_version.VersionLabel);
More information:
http://msdn.microsoft.com/en-us/library/microsoft.sharepoint.client.file.versions.aspx
Best Regards,
Dennis Guo

Own CS3 Web Premium, and trying to download replacement media, but get 404 error

I purchased and registered (have serial number) CS3 Web premium when it was current. Now I need replacement media to re-install on new computer (Mac), but the download link on Adobe site returns a 404 error. How do I download? Can I get a CD mailed?

no, you must download the installation files or ask someone else to download and copy to a usb or burn a disk for you.
are you trying to download from adobe.com or prodesigntools.com?

Google search, youtube, facebook, and yahoo all giving 404 errors 9-9-13

Today I was having issues with my internet. After calling my provider (Time Warner Cable) and doing the proper troubleshooting it has boiled down to it is a problem with Firefox.
Whenever I load Firefox, I have it set so the same tabs open each time. Google, Facebook, Youtube, and Yahoo. Normally they would load and I would start my business or what-have-you, but today all are giving 404 errors. I have refresh the page it does not resolve the issue or if I manually type in the page address in, it too, does not load. Facebook will load properly once I type in the website in the bar and load it that way. If I open a new tab and try these websites (Google, Youtube, Yahoo, and Facebook) they all give me the 404 error, but if I click on the Facebook logo in the left hand corner of the page, it will load my news feed. CNN, TWC, and Gmail all load fine and I am able to use the services. Another thing I tried was disconnecting manually from my internet and then reconnecting. I changed my SSI and reset the modem several times still to no avail. If I load Google using my phone, it comes up fine, same as all the other sites listed. I restarted my computer twice (each after both resets of my modem) and I still have this problem. Now the "funny" thing now is that if I load these pages in Internet Explorer, they all load without any 404 errors. I have not tried clearing my cache or history today, and I checked the Firefox website to make sure I have the current version (I normally ALWAYS update my Firefox when it is requested). I don't want to have to uninstall Firefox I JUST got all my bookmarks back from the last uninstall I had to do (accidentally loaded an unwanted toolbar, yuck!) and also this was working fine yesterday and early this morning (2-3am central time)
ANY information regarding this issue will be welcome! Thanks!

The 404 or Not Found error message is a HTTP standard response code indicating that the client was able to communicate with the server, but the server could not find what was requested. How To Fix the 404 Not Found Error
Retry the web page by pressing F5, clicking the refresh/reload button, or trying the URL from the address bar again.
The 404 Not Found error might appear for several reasons even though no real issue exists, so sometimes a simple refresh will often load the page you were looking for.
Check for errors in the URL. Often times the 404 Not Found error appears because the URL was typed wrong or the link that was clicked on points to the wrong URL.
Move up one directory level at a time in the URL until you find something.
For example, if www.web.com/a/b/c.htm gave you the 404 Not Found error, move up to www.web.com/a/b/. If you get nothing here (or an error), move up to www.web.com/a/. This should lead you toward what you're looking for or at least confirm that it's no longer available.
Tip: If you have moved all the way up to the website's homepage, try to run a search for the information you're looking for. If the site doesn't have a search function, try navigating to the page you want using category links to dig deeper into the site.
Search for the page at a popular search engine. It's possible that you simply have the entirely wrong URL in which case a quick Google or Bing search should get you where you want to go.
If you do find the page you were after, update your bookmark or favorite to avoid the HTTP 404 error in the future.
Clear your browser's cache if you have any indication that the 404 Not Found message might just be yours. For example, if you can reach the URL from your phone but not from your tablet, clearing the cache on your tablet's browser might help.
You might also consider clearing your browser's cookies, or at least the one(s) involved with the website in question, if clearing the cache didn't work.
Change the DNS servers used by your computer but usually only if an entire website is giving you a 404 error, especially if the website is available to those on other networks (e.g. your mobile phone network or a friend in another city).
404's on an entire website isn't particularly common unless your ISP or government filters/censors websites. No matter the reason, if it does happen, giving another set of DNS servers a try is a good step to take. See my Public DNS Servers List for some alternatives.
Finally, if all else fails, contact the website directly. If they've removed the page you're after then the 404 error is completely legitimate and they should be able to tell you that. If they've moved the page, and are generating 404's instead of redirecting visitors to the new page, they might be very happy to hear from you.
A WHOIS search, using the site's domain name (e.g. weather.com) as your search term, should give you some contact information.
If the WHOIS search isn't helpful, know that many sites can be reached via email at [email protected], replacing website.com with the real website name. Contacting a site via one of their social networking profiles is another good idea.

I am getting a 404 error when trying to access any search link using google, I can get to a website if I enter the url directly. I have cleared my history, emptied the cache and reset safari.

I keep getting a 404 error when trying to access any search link using google, I can get to a website by directly using the URL. I have cleared history, empited the cache and reset safari. Any suggestions.

Right. If you are using delegated privs and sudo, make sure that sudo is configured to pass on the PERL5LIB and ORACLE_HOME environment variables at least.

My homepage, cnn, loads but is then redireted to yahoo search and I get a 404 error message

I downloaded 4.0 at work and at home. home works fine. at work when I open Foxfire, cnn is my homepage. cnn loads, but is redirected to yahoo search. I don't know what it is searching for; I get a 404 error message. I also have a Yahoo menu button between Bookmarks and Tools. I have uninstalled 4.0 and reinstalled. I have reinstalled 3.? but it continues to happen. How can i get rid of this Yahoo problem? I really don't want to go back to Explorer and I refuse to go to Foxnews.

I'm glad I was able to help. I kind of wish mine hadn't worked because I ended up being one of the "lucky" individuals where my phone didn't restore from the backup and I lost all of my contacts, calendar appts, notes, etc. It took me an extra 2 hrs last night to rebuild the next month worth of appts and try to rebuild my contact list from my yahoo contacts. Oh well. I will be getting an android at my next upgrade. I'm tired of all of the BS that comes with owning an iPhone.

Images and js files within a deployed war file are generating 404 errors.

Greetings,
I have an odd situation in that image files and js files that are part of a deployed war file are generating 404 (not found) errors when accessed via https but ARE found when accessed via http.
Unfortunately we are required to use https.
I have verified via jar -tf that the files are indeed part of the war file. So, it is not that they are missing as is evident when accessed via http. (they appear as expected)
A work around is to create the sub directories under the document root, on the ohs, and populate the sub directories with the images and js files that were used as part of the war file build. While this works, it doesn't explain why they would generate a 404 error when referenced from within the war via https.
The war file works correctly on our 10g installation.
I also have a very simple deployed war file and it too seems to have an issue finding direcotries/files that are part of the war file when referenced via https but not http.
We are using Oracle 11g OHS and using the WLS Admin Console to do the deploying. We also are using the OSSO for the performing the required authentication.
I have an SR in with oracle and have been working with them but I thought I would post here too.
Suggestions?
Thanks in advance.
Edited by: emmett on Jan 5, 2011 2:47 PM

Don't crosspost. Continue here: http://forum.java.sun.com/thread.jspa?threadID=5251627

Handling 404 errors and web robots

I'm using CFMX 6.1.
We handle our own errors for page not found (404 errors). But
I'm finding that web spiders/robots from search engines such as
Yahoo or Google seem to index these "page not found" custom pages.
I want them to get the message that the page isn't found and DON'T
index it, while displaying our custom error page to the human web
visitors that encounter the same URL.
How do you do this?

Google "robots.txt" for information on how to tell web bots
what pages
should and shouldn't be indexed.
Bryan Ashcraft (remove brain to reply)
Web Application Developer
Wright Medical Technology, Inc.
Macromedia Certified Dreamweaver Developer
Adobe Community Expert (DW) ::
http://www.adobe.com/communities/experts/
"Tea man" <[email protected]> wrote in
message
news:ee7j8m$ftu$[email protected]..
> I'm using CFMX 6.1.
> We handle our own errors for page not found (404
errors). But I'm finding
> that
> web spiders/robots from search engines such as Yahoo or
Google seem to
> index
> these "page not found" custom pages. I want them to get
the message that
> the
> page isn't found and DON'T index it, while displaying
our custom error
> page to
> the human web visitors that encounter the same URL.
>
> How do you do this?
>

Without any prompt from me, Firefox is continually redirecting itself and displaying a 404 Error message. What can I do to correct this?

Upon laptop start-up, with Firefox as my web browser, I generally visit news sites beginning with with CNN. Aside from updating Adobe Acrobat Reader to the X version, I have not added anything to my laptop (A Sony Vaio A/W series 64 bit operating with Windows 7) recently, but I am continuously being redirected via the 404 error message without clicking or while reading an article. Firefox has also been crashing daily despite efforts to keep the cache clean and a minimum of programs running during use. I use Norton 360 for antivirus protection and update daily and have not found any bugs to suggest adware or malware. I do have Chrome loaded as a secondary browser, but Firefox has been my browser of choice until recently. Help.

Hello WhiteDove2043, try to UNCHECK the '''Warn me when websites try to redirect or reload the page''', go from : Tools > Options > Advanced > General tab > Accessibility > Warn me when websites try to redirect or reload the page [ ]. Don't forget to click OK to save it.
see for more info : [https://support.mozilla.org/en-US/kb/advanced-settings-browsing-network-updates-encryption#w_accessibility Accessibility]
thank you

Trying to add four columns and getting HTTP-404 error

Hi,
I am trying to add 4 dropdowns in an form, but I am getting HTTP-404 error if i insert values in to those 4 dropdowns. Please guide me how to proceed with this.
Regards,
Pallavi

I got it to work this way I was putting in a wrong field that was not returning data now it works. Yay!!!!!
SELECT
A1.auth_number,
A1.AUTH_TYPE,
A1.seq_memb_id,
     A1.AUTH_TYPE,
a1.review_type,
A1.plan_code,
A1.OVERALL_STATUS,
          A1.CLOSED_REASON,
A1.DENIED_REASON,
Case
when A1.DENIED_REASON in ('HS001','HS002','HS003') then 'MED NECESS'
when A1.DENIED_REASON in ('HS004','HS005','HS006','HS007','HS008','HS013','HS014','HS016','HS017','HS019','HS020') then 'Admin Denial'
when A1.DENIED_REASON is NUll and ap.advisor_decision = 'AAPPR' then 'Approved'
else 'Unknown'
end DENIED,
To_Char(a1.admit_primary_date,'mm/dd/yy') As "Prim_Admit_Date",
A1.service_admit_type AS "IP ADMIT TYPE",
A1.service_user_defined_1 AS "OP Serv Type",
UVD.user_valid_code_long_desc as "OP_Type_Desc",
To_Char (AP.contact_date,'mm/dd/yy') As "Contact_Date",
     To_Char (AP.decision_date,'mm/dd/yy') As "Decision_Date",
ap.recommendation_code,
A1.PLACE_OF_SERVICE,
     AP.ADVISOR_DECISION,
PM.LAST_NAME,
TO_CHAR (A1.insert_datetime,'MONTH-YY')AS "Month",
     MV.LINE_OF_BUSINESS
FROM Windsoradm.auth_master a1
INNER JOIN Windsoradm.auth_phys_advisor ap
ON a1.auth_number=ap.auth_number
INNER JOIN windsoradm.prov_master pm
ON ap.seq_prov_id=pm.seq_prov_id
LEFT JOIN windsoradm.note_master nm
ON nm.seq_memb_id=a1.seq_memb_id
AND NM.NOTE_TYPE='PHA'
INNER JOIN windsoradm.member_mv mv
ON mv.seq_memb_id=a1.seq_memb_id
INNER JOIN windsoradm.user_defined_valdt_codes UVD
ON A1.service_user_defined_1=UVD.user_valid_code
AND UVD.VALIDATED_TABLE_NAME = 'auth_master'
AND UVD.VALIDATED_COLUMN_NAME = 'service_user_defined_1'
Where mv.Line_of_Business <>'SFS'
/*AND A1.PLACE_OF_SERVICE IN ('11','21','22','24')*/
/*AND a1.active_physician_advisor = 'Y'*/
/*AND (a1.closed_reason ='A06' OR a1.closed_reason is Null)*/
/*AND A1.AUTH_NUMBER='415712'*/
AND a1.insert_datetime Between To_Date ('04/01/2012', 'MM/DD/YYYY') and To_Date ('04/30/2012','MM/DD/YYYY')
ORDER BY 1

404.3 error CFMX7 and Win 7

Similar Messages

Maybe you are looking for