404 error HELP

I have a web page FOCCL.com. On it I have a link that says Visit our Library Online. This link used to work until the Library online page changed. The link to the Library page is http://www.hsvpoa.org/Library.htm which I can get to by typing it in Safari.
When my link to this page from my web page is pressed, I see Safari going to http://www.hsvpoa.org/Coronado%20Library.htm thus producing a 404 error. Why is iWeb putting in the "Coronado%20"?
I really need an answer as this is driving me nuts. I have checked and rechecked thru the inspector and my address is correct and has been republished, but that error persists. I hope someone can see where I am going wrong.
I have cleared the Safari cache and reset.
Thanks,

When my link to this page from my web page is pressed, I see Safari going to http://www.hsvpoa.org/Coronado%20Library.htm thus producing a 404 error.
I don't get that at all, it works just fine. Do you know of anyone else who gets an error besides yourself? If not, your problem is local to your machine or browser cache.

Similar Messages

BlazeDS - Coldfusion 8 error - Deploy Samples - 404 error - Help

I have BlazeDs running locally Great,
I've run through the BlazeDs - Coldfusion 8 Installation/configuration notes, but I'd getting Failed to send error's
http://cfserver.hull.ac.uk/ds-console/
http://cfserver.hull.ac.uk/samples/index.htm
I carn't see whats wrong with it !
Any help please.

Couuld someone give me some suggestions?

I am using OS 10.7 Lion. Quicktime will not play avi files. One support forum gave 2 links to get them but I got a 404 error. Can anyone help?

I am using OS 10.7 Lion. Quicktime will not play avi files. One support forum gave 2 links to get the proper codecs but I got a 404 error. Can anyone help?

You can also use VLC
http://www.videolan.org/vlc/download-macosx.htm
It woks very well, can read almost anything, and also lets you do conversions to other formats.

I use google in the search bar..where you get to pick which search engine you want.When I enter a search term a get a google 404 error. All other serch engines work. Help! Thanks

Question
I use google in the search bar..where you get to pick which search engine you want.When I enter a search term a get a google 404 error. All other serch engines work. Help! Thanks

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove the Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Do a malware check with some malware scanning programs. 
You need to scan with all programs because each program detects different malware. 
Make sure that you update each program to get the latest version of their databases before doing a scan. 
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also:
* "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

On Yahoo Mail...and ONLY Yahoo Mail..I get a 404 error after entering my user name and password. This doesn't happen with IE, just Firefox, and just Yahoo Mail. Yahoo was absouletly no help whatsoever; can you solve the mystery? Thanks

On Yahoo Mail...and ONLY Yahoo Mail..I get a 404 error after entering my user name and password. This doesn't happen with IE, just Firefox, and just Yahoo Mail. I tried uninstalling and reinstalling FF; no change. Yahoo was absolutely no help whatsoever; can you solve the mystery? Thanks

HI Emmet,
thanks so much for your posts back. I really appreciate it and yes that does help to know that you could not get it working.
I did have some success, in removing the SSL Authentication checkbox in the smtp server settings - I found that this allowed my friend to be able to send mail from the mail app via his sbcglobal (yahoo) account.
So that did help but of course the messages do not have ssl encryption and I'm not sure how big a deal that is for an individual. He is able to receive mail but unless the SSL authentication box is unchecked, he cannot send.
i hope that helps anyone out there also!
Thanks also for the tip about sparrow - yes I have heard of it and it is very popular, he may end up using that in the end.
Thanks again, much appreciated.
Felix

In iWeb I created a hyperlink to a file on my computer. When I publish I get a 404 error for the link. Can anyone help?

In iWeb I created a hyperlink to a file on my computer. When I publish I get a 404 error for the link. Can anyone help?

How would I check to see if the like works when I enable via the inspector pane
If you enable hyperlinks when you click on the link link to the pdf file it will open a browser window and display the pdf file.
I upload the pdf files to the server and link to them as if they were an external web page:
That's been more reliable for me than linking to the file as Link To: A file and have iWeb upload the pdf file to the serve.

I cannot fix a 404 HTTP error help please

hello i am trying to access a web address and i try using safari or firefox, and i always encounter this error :
HTTP Error 404 - File or directory not found.
Internet Information Services (IIS)
Technical Information (for support personnel)
Go to Microsoft Product Support Services and perform a title search for the words HTTP and 404.
Open IIS Help, which is accessible in IIS Manager (inetmgr), and search for topics titled Web Site Setup, Common Administrative Tasks, and About Custom Error Messages.
the web address i am trying to go to is www.shoemetro.com i only have this kind of error when i tyoe this address otherwise i don't have any problem using other addresses that is kind of weird !!!
if you can help me i would appreciate.
thanks

A 404 error is a server error and can only be 'cured' by the mainatiner of that server not by you.
http://en.wikipedia.org/wiki/Link_rot
Stefan

404 error code .. help plz

Hi all,
how can I catch the 404 errors in my jsp page to throw these excptions to My errorPage ??
I write in My home Page (index.jsp) to catch this error :
try {
// My code
} catch(FileNotFoundException ex) {
throw new FileNotFoundException("page not found");
and I write in the web.xml Page :
<web-app>
<display-name>Orange Whip Studios</display-name>
<description>JRun Web Application Construction Kit Demo</description>
<context-param>
<param-name>CompanyName</param-name>
<param-value>Orange Whip Studios</param-value>
</context-param>
<context-param>
<param-name>Datasource</param-name>
<param-value>ows</param-value>
</context-param>
<error-page>
<error-code>404</error-code>
<location>/errorPage.jsp</location>
</error-page>
<error-page>
<error-code>500</error-code>
<location>/errorPage.jsp</location>
</error-page>
<error-page>
<exception>java.sql.Exception</exception>
<location>/errorPage.jsp</location>
</error-page>
</web-app>
the 500 error code and the java.sql.Exception work finally .. but the 404 error code didn't ??? can anyone tell me why????

You aren't forwarding the request to a JSP at any way. Use RequestDispatcher#forward() for that.
I also recommend to separate your logic. Use DAO class for the database logic. Use servlet class for the business logic and use JSP for the view logic. E.g.
// Process request parameters.
String username = request.getParameter("username");
String password = request.getParameter("password");
// Get User from DAO.
User user = yourUserDAO.loadUser(username, password);
// Check User.
if (user != null) {
 // User exist.
 request.getSession().setAttribute("user", user);
 request.setAttribute("isLoggedIn", Boolean.TRUE);
} else {
 // User doesn't exist.
 request.setAttribute("isLoggedIn", Boolean.FALSE);
// Forward request back to login JSP file.
request.getRequestDispatcher("login.jsp").forward(request, response);login.jsp:Login ${isLoggedIn ? 'succesful' : 'failed'}or use JSTL c:if / c:choose.
Besides, why don't you trust the database? You're querying the database for a single row matching the username and password. If it returns a row, then you're comparing the username and password once again in Java. Why?

When I use the shortcut to open a new window in safari (command N), I get a 404 error message from Google. How do I change where 'Command N' routes to?

When I use the shortcut to open a new window in safari (command N) on my Macbook Pro, I get a 404 error message from Google. How do I change where 'Command N' routes to?

It's not necessary to change the Command N keystroke..
From your Safari menu bar click Safari > Preferences then select the Privacy tab.
Click: Remove All Website Data
Then delete the cache.
Open a Finder window. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test.
If that didn't help, troubleshoot Safari extensions.
From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test.
If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.

Can't connect PHP/MySQL 404 error

Wow, the learning curve is killing me. Yet another challenge. I'm using Dreamweaver CC and this tutorial http://www.adobe.com/devnet/dreamweaver/articles/setup_php.html
I'm at this step:
Open comments.php. You must have a PHP page open in the Document window to create a MySQL connection.
In the Databases panel (choose Window > Databases), click the Plus button on the panel and select MySQL Connection.The MySQL Connection dialog box appears.
Type connTest as the connection name.
For the MySQL Server, type localhost.If you are using the MAMP default ports on a Mac, use localhost:8889.
For the User Name, type phptestuser.
Type the password you chose for the phptestuser account in the Password field.
For the Database, type php_test.Note: You don't need to precede the underscore with a backslash here. It was inserted by phpMyAdmin in the previous section (see Figure 20) only because phpMyAdmin uses a query that permits wildcard characters.
Click Test.Dreamweaver attempts to connect to the database. If the connection fails, do the following:
Double-check the server name, user name, and password.
Check the settings for the folder Dreamweaver uses to process dynamic pages (see Specifying a Testing Server for Dreamweaver).
Verify that the web and MySQL servers are both running.
Temporarily disable any firewall or security program. If the connection works, you need to configure the security program to permit communication between Dreamweaver and MySQL.
Click OK. The new connection appears in the Databases panel.
Expand the connTest connection, and then expand the Tables branch. You'll see the comments table in the database, which you can expand to reveal the details of the table columns (see Figure 23).
As far as I can tell I have followed this tutorial to the letter.
As far as I can tell, XAMPP/php mySQL are all running fine, the files are in the correct place and everything should be working. However when I hit test I get a 404 error. (Same error when I hit the select button.)
The suggested problems on the 404 message are:
1. There is no testing server running on the server machine.
Pretty sure the testing server is running. Is there any way to test this, other than to note that xampp is definitely running right now and that I can log into phpMYadmin no problem?
2. The testing server specified for this site does not map to the http://localhost/php_test/_MMServerScripts/MMHTTPDB.php URL Verify that the URL Prefix maps to the root of the site.
Ummm...I'm pretty sure I put things where I was told to put them in the tutorial, but I'm lost at this point where I should verify what. A clue here? The files are where they are supposed to be, but maybe I entered something wrong? Except...I'm not sure what that could be or where to find it. Whatever IT is.
Everything in local files is looking good.
Thanks for your help!
PS: Extra points to anyone who figures out how to make copy/pasteable error messages! These buggers are the bane of my life!

Bgupta, you rock!
I hope you have copied the "mysql.php" and "MMHTTPDB.php" files from "C:\Users\username\AppData\Roaming\Adobe\Dreamweaver CC\locale\Configuration\Connections\Scripts\PHP_MySQL\_mmDBScripts" to "C:\xampp\htdocs\phptest\_mmServerScripts"
This was EXACTLY the problem. I checked the tutorial and I couldn't even find where the tutorial said to do this. (If I missed it, let me know where in the tutorial it was, please.)
Fixed!

404 error when publishing to FTP server.

I'm getting the 404 error when publishing my iWeb site to my FTP server. Please help.
It says I have a good connection and publishes but then I get the error when I "Click to go to the site." I've read where I have to upload the file to my server but with the file index_html. Do I rename my iWeb file, domain, to index_html?

I'm getting the 404 error when publishing my iWeb site to my FTP server. Please help.
It says I have a good connection and publishes but then I get the error when I "Click to go to the site."
A 404 errors means the file is not on the server.
Checking the connection is just testing the FTP connection.
I've read where I have to upload the file to my server but with the file index_html. Do I rename my iWeb file, domain, to index_html?
Do I rename my iWeb file, domain, to index_html?
No, you don't. The domain file is where iWeb stores its assets. It stays on your computer. It has no meaning outside it. iWeb publishes the index.html file and all the other files.
Read this : The concept of iWeb Sites
So if your pages do not load, check for their presence on the server.

404 Error Message while running a servlet

Unable to run Snoop Servlet in JRUN 2.3.3 running on IIS4.0. I give the url
as http://websitename/servlet/SnoopServlet . But I get HTTP error 404 error.
I am trying to run the snoop servlet in the jrun/jsm-default/servlet directory. But, I am not able to run the servlets that are in the Servlet directory. It says '404 - Page Not Found Error'. Can anyone help me out what should I change to run the servlet when I type http//websitename/servlet/snoopservlet. Where 'snoopservlet' is the servlet in the servlets directory.

I have been using JRun 3.1 and the default servlets directory is:
servers\default\default-app\web-inf\classes
Try to put your servlets in this folder.

404 error while invoking servlet in weblogic 6.0

 Hi,
 When I try to invoke a servlet from weblogic 6.0, I am getting
 404 error. I have copied the HelloWorldServlet class into defaultWebAppl_Server/WEB_INF/CLASSES
 directory and when I invoke the HelloWorldservlet, its giving file
 not found(404) error. I am doing exactly what has been given in
 the "quick start to servlets" in weblogic 6.0. I am using Windows
 NT.
 I have also another problem when I use java utils.dbping to test
 the connection to my oracle8.1.8, its giving licence file not found.
 Could some one help me out from this.
 Thanks in advance,
 Ramu


 Hi kumar,
 I have been keep trying to solve that. After some time Suddenly
 "Error 404" disappeared and instead "Error 500" came. Okay kumar,
 here is what I am doing...
 I have installed weblogic6.0(eval), oracle 8.1.6 on Windows NT4.0.
 I have installed oracle Enterprise edition from CD "ORACLE 8.1.6
 for NT".
 I installed the weblogic under D: drive.
 I did class path settings as given in documentation. But Iam not
 sure whether I need to do any other class path settings.
 I was able to run pet store application given in weblogic server.
 I went to "quick start" section and ran HelloWorld.jsp page from
 "DefaultWebApp_myServer" directory.
 I was not able to run servlet program as per given in the "quick
 start". I am getting
 "Error 500---Internal server error"
 The server encountered an unexpected condition which prevented
 it from fulfilling the request"
 I have modified the web.xml under WEB-INF of DefaultWebApp_myServer
 as per given in the quick start.
 Here is the quick start link For you reference(as what I talking
 about)
 http://edocs.beasys.com/wls/docs60/quickstart/quick_start.html
 In the web.xml, I have given <servlet-class> as just HelloWorldServlet,
 since I directly copied the file from some other examples directory.
 But still I am getting 500 error.
 Here is the url that I am invoking...Http://ramup:7001/quickStartServlet
 Coming to your oracle connection test, I did exactly what you said.
 kumar, I have executed the command
 "D:\bea\wlserver6.0\config\mydomain>java -classpath %classpath%;D:\bea
 utils.dbping ORACLE
 >scott tiger TestDB"
 Where TestDB is the database that I have created while installing,
 but I am not aware of the instance you said.
 Here is what I got after executing the command.
 --------*******-------Pasting the ms-dos command results----**-
 // This mode is superior, especially in serverside classes because
 // it avoids DriverManager calls are class synchronized, and will
 // bottleneck any other JDBC in the server, even already-running
 // connections, because all JDBC drivers use DriverManager.println()
 // to log info and exceptions, and that call is also class synchronized.
 // For repeated connecting, a single driver instance can be re-used.
 **** or ****
 Class.forName("weblogic.jdbc.oci.Driver").newInstance();
 java.sql.Connection conn =
 DriverManager.getConnection("jdbc:weblogic:oracle:TestDB", "scott",
 "tiger")
 **** or ****
 java.util.Properties props = new java.util.Properties();
 props.put("user", "scott");
 props.put("password", "tiger");
 props.put("server", "TestDB");
 Class.forName("weblogic.jdbc.oci.Driver").newInstance();
 java.sql.Connection conn =
 DriverManager.getConnection("jdbc:weblogic:oracle", props);
 D:\bea\wlserver6.0\config\mydomain>
 --------*******-------Pasting the ms-dos command results----**-
 I think I have connection to database, thanks for your suggestion.
 Kumar, I have not seen weblogic.properties file any where in D:\bea
 directory.
 Kumar, if you have some time can you jot down the classpath settings
 and path settings for executing SERVLETS/EJB programs.
 Thanks for helping me out..,
 Ramu
 Kumar Allamraju <[email protected]> wrote:
 >Assuming you registered the helloworld servlet in web.xml,
 >could you show me the url
 >that you typed in the browser window? :)
 >
 >
 >Regarding the dbping problem, make sure license.bea is
 >in the classpath
 >
 >ie.. java -classpath %classpath%;D:\bea utils.dbping ORACLE
 >scott tiger [instance-name]
 >
 >PS: I'm assuming WLS is installed in D:\bea directory.
 >
 >--
 >Kumar
 >
 >
 >Ramu wrote:
 >
 >> Hi,
 >>
 >> When I try to invoke a servlet from weblogic 6.0, I
 >am getting
 >> 404 error. I have copied the HelloWorldServlet class
 >into defaultWebAppl_Server/WEB_INF/CLASSES
 >> directory and when I invoke the HelloWorldservlet, its
 >giving file
 >> not found(404) error. I am doing exactly what has been
 >given in
 >> the "quick start to servlets" in weblogic 6.0. I am
 >using Windows
 >> NT.
 >>
 >> I have also another problem when I use java utils.dbping
 >to test
 >> the connection to my oracle8.1.8, its giving licence
 >file not found.
 >>
 >> Could some one help me out from this.
 >>
 >> Thanks in advance,
 >> Ramu
 >

BizTalk published WCF service throwing HTTP 404 error using ISA reverse proxy settings

I have published my schemas as a WCF service from BizTalk 2010 "Publish WCF Service" wizard. I used Wcf-basicHTTP adapter in receive port. I am able to run the service successfully on localhost IIS and I tested my biztalk solution by sending request using SOAP UI and got response successfully.... Now: Actually, I need to give this service endpoint to my vendor who will send request from outside my company's network i.e. internet. In my infrastrucrue BizTalk is behind the firewall so, we setup a REVERSE proxy server at DMZ layer and it is configured properly. I have tested a simple WCF service by replacing the localhost with Proxy server configured address <DNSName> and it worked absolutely fine. But when I change localhost in my BizTalk schema based published WCF service it is not working and I am getting following error. Really strugling to get it resolved. I wasted a whole 3 days....very upset. Please help me out by giving the detailed step solution. Description: HTTP 404. The resource you are looking for (or one of its dependencies) could have been removed, had its name changed, or is temporarily unavailable. Please review the following URL and make sure that it is spelled correctly. Requested URL: /BizTalkServiceInstance/MyService.svc I am surprized why other c# code based WCF services are working fine with reverse proxy settings. Server Error in '/' Application. The resource cannot be found.Is there any special things to consider Biztalk exposed wcf servcie over ssl in IIS cluster with ISA

Hi Singam :)
First I would start by browsing any other files (files other than the one from WCF) just to ensure that the reverse-proxy’s redirection rules are set correctly. If you get the same 404 error when you try to access other service/files “through reverse-proxy”,
then it’s an issue in the redirection rule(s) in reverse-proxy.
If others are fine i.e. no issue in reverse-proxy setup as such, then try the following for WCF service's web.config file. I have seen this issue in WCF service (not just BizTalk’s artifacts exposed as service in reverse-proxy). Add serviceHostingEnvironment
config as show with in serviceModel section.
<system.serviceModel>
<serviceHostingEnvironment aspNetCompatibilityEnabled="true" multipleSiteBindingsEnabled="true" />
</system.serviceModel>
Regards,
M.R.Ashwin Prabhu
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

404 error while accessing the blob in cdn

Hi Team,
I have a public container where I store my blob via code.
I am able to access the item from the container via tha blob url. But when I try to access the blob via CDN I get the 404-Not found error.
I have set up the CDN 3 days back.
When I was using the Free trial it was working fine.But when I created the new strorage/container and CDN endpoint with my Visual Studio premium subscription I am getting this issue.
The endpoint and the quertystring are enabled.Do I need to pay for CDN, I don't think this should be the case.
Please help me out on this.
My CDN endpoint is - http://az678809.vo.msecnd.net/
Eg: My blob url - http://chiprocontainer.blob.core.windows.net/sitecorecontainer/Images/Destination/San%20Fran%20GG%20Bridge.jpg

hi,
How did you set your container permission as "public"?
I suggest you could add this setting permission code into your container:
CloudBlobContainer container = blobClient.GetContainerReference("mycontainer");
container.CreateIfNotExist();
// Create a permission policy to set the public access setting for the container.
BlobContainerPermissions containerPermissions = new BlobContainerPermissions();
containerPermissions.PublicAccess = BlobContainerPublicAccessType.Container;
//Set the permission policy on the container.
container.SetPermissions(containerPermissions);
About above code, I suggest you could refer to this docs(http://msdn.microsoft.com/en-us/library/microsoft.windowsazure.storage.blob.blobcontainerpublicaccesstype.aspx
At the same time, I used the Fiddler and Azure Storage Explore to reproduce this issue:
1. I create a container named "img" and upload an image
2.And set the security property in Azure Storage Explore as Public container. I could visit the CDN endpoint successfully.
GET http://az678259.vo.msecnd.net/img/test/det/4.jpg HTTP/1.1
Accept: text/html, application/xhtml+xml, */*
Accept-Language: en-US,en;q=0.8,zh-Hans-CN;q=0.5,zh-Hans;q=0.3
User-Agent: Mozilla/5.0 (Windows NT 6.3; WOW64; Trident/7.0; rv:11.0) like Gecko
Accept-Encoding: gzip, deflate, peerdist
Host: az678259.vo.msecnd.net
If-Modified-Since: Wed, 22 Oct 2014 05:32:35 GMT
If-None-Match: 0x8D1BBD0B814C51A
DNT: 1
Connection: Keep-Alive
Pragma: no-cache
X-P2P-PeerDist: Version=1.1
X-P2P-PeerDistEx: MinContentInformation=1.0, MaxContentInformation=1.0
But I visit your CDN endpoints, I got the 404 error:
GET http://az678809.vo.msecnd.net/sitecorecontainer/Images/Destination/San%20Fran%20GG%20Bridge.jpg HTTP/1.1
Accept: text/html, application/xhtml+xml, */*
Accept-Language: en-US,en;q=0.8,zh-Hans-CN;q=0.5,zh-Hans;q=0.3
User-Agent: Mozilla/5.0 (Windows NT 6.3; WOW64; Trident/7.0; rv:11.0) like Gecko
Accept-Encoding: gzip, deflate, peerdist
Host: az678809.vo.msecnd.net
DNT: 1
Connection: Keep-Alive
X-P2P-PeerDist: Version=1.1
After I changed the container permission, I could get the 404 error in my test container. So I suggest you could set the container permission firstly.
Any questions about this issue, please let me know.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

404 error HELP

Similar Messages

Maybe you are looking for