404 error OA_HTML/AppsLogin not found on fresh clone Pls Help

Hi,
running R12 on solaris SPARC 64bits on 10.2.0.3 DB. Finished rapid clone and completed without errors. All services are up and running but login pages saying not found. This is strange can you all please help me out been battling with it for days and even cloned again thinking the problem was in the cloning process but I still have the same error. Your kind assistance is urgently required. Thanks in advance.
Jess

Hi Srini,
Thanks alot for your response. How can I delete the other post? My OS is solaris 10 and db is 10.2.0.3 and There is the access_log. Thanks in advance backed up the error log says" page not found:" what does this suggest? and access log and it seems olny the access log was generated
Regards
Jess
127.0.0.1 - - [12/Sep/2010:18:21:11 +0100] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
127.0.0.1 - - [12/Sep/2010:18:21:31 +0100] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
127.0.0.1 - - [12/Sep/2010:18:21:51 +0100] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
172.16.65.25 - - [12/Sep/2010:18:22:03 +0100] "GET /OA_HTML/OA.jsp?page=/oracle/apps/fnd/wf/worklist/webui/NotifMailerPG&WFRegion=NtfDetail&NtfId=108381&dbc=DEV&OARF=email&language_code=US oas=A38YYukAokTaCNvY7JN4Bg.. HTTP/1.1" 404 220 0 "-" "Mozilla/4.76 Oracle HTTPClient Version 10h"
172.16.65.25 - - [12/Sep/2010:18:22:09 +0100] "GET /OA_HTML/OA.jsp?page=/oracle/apps/fnd/wf/worklist/webui/NotifMailerPG&WFRegion=NtfDetail&NtfId=108381&dbc=DEV&OARF=email&language_code=US&oas=A38YYukAokTaCNvY7JN4Bg.. HTTP/1.1" 404 220 0 "-" "Mozilla/4.76 Oracle HTTPClient Version 10h"
127.0.0.1 - - [12/Sep/2010:18:22:11 +0100] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
127.0.0.1 - - [12/Sep/2010:18:22:31 +0100] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
127.0.0.1 - - [12/Sep/2010:18:22:51 +0100] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
172.16.65.25 - - [12/Sep/2010:18:23:09 +0100] "GET /OA_HTML/OA.jsp?page=/oracle/apps/fnd/wf/worklist/webui/NotifMailerPG&WFRegion=NtfDetail&NtfId=109007&dbc=DEV&OARF=email&language_code=US&oas=weJvbSmQdQRTesE2C2cR7w.. HTTP/1.1" 404 220 0 "-" "Mozilla/4.76 Oracle HTTPClient Version 10h"
127.0.0.1 - - [12/Sep/2010:18:23:11 +0100] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
172.16.65.25 - - [12/Sep/2010:18:23:14 +0100] "GET /OA_HTML/OA.jsp?page=/oracle/apps/fnd/wf/worklist/webui/NotifMailerPG&WFRegion=NtfDetail&NtfId=109007&dbc=DEV&OARF=email&language_code=US&oas=weJvbSmQdQRTesE2C2cR7w.. HTTP/1.1" 404 220 0 "-" "Mozilla/4.76 Oracle HTTPClient Version 10h"
127.0.0.1 - - [12/Sep/2010:18:23:31 +0100] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
127.0.0.1 - - [12/Sep/2010:18:23:51 +0100] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
127.0.0.1 - - [12/Sep/2010:18:24:11 +0100] "HEAD /index.html HTTP/1.1" 200 0 0 "-" "-"
Edited by: 794286 on Sep 12, 2010 12:07 PM

Similar Messages

Error code "File not found Result code = -43" PLEASE HELP!

I keep getting this error message: "File not found Result code = -43" when trying to load instruments from the media tab. Does anyone know why this is happening and know how to fix this problem? I'm in the middle of a project and need help! Thanks.

So, I've narrowed down the problem to happening with the following steps (could someone possibly try this and see if the same problem is happening?)
If I load an instrument track and its blank and select a GARAGEBAND loop from the media list, I get the error message.
If I load a new instrument track and select any other instrument from the media list (besides a Garageband instrument) everything loads fine, AND THEN if I select a Garageband instrument from the list, it loads fine with no error.
If I select "No plug-in" in the channel strip after this, and try to load a Garageband loop, I get the error message and all other instruments from the media lists fail to load until I select "no-plugin" again from the channel strip and select an instrument from the media list BESIDES a Garageband instrument and then go from there (and can then load a Garageband instrument).
Is anything like this happening to anyone else? Does anyone have any ideas why this would be happening?

Moved Music to New Hard Drive - Required folder not found??? pls help

Hello
I have recently purchased a new external hard drive as my crappy Dell was full to the brim with music.
I have moved all my music files over to the hard drive and re installed itunes.
Now when i drag my music folder into the itunes library it updates but the shortly after an error message occurs that says:-
'Itunes Libray music file cannot be saved. Required folder not found'
Previously i have saved my itunes folder within my music folder?.
Now everytime i close down itunes all my music has gone from it!??
Any suggestions....sorry if being really ignorant..not too profficient on computers..
Thanks in advance.
Sam
Dell PC Windows XP
Dell PC Windows XP

I think itunes by default looks inside you my music folder. In the itunes preferences screen there is an option to select a new folder to your library. Change the path to the music folder on your external drive. Make sure to always have the drive turned on before launching itunes though.
You may also be able to replace the my music folder with a shortcut to the music folder on the external drive. This behavior may not work in windows though so I'm not sure.

When I try to update LR I get an error message Application not found

When I try to update LR I get an error message "Application not found".
When I try Help in LR it can't be found.
What is wrong?

Talked with Adobe support. Told me to go to Cloud app and log out, then log
in again and then update. Worked fine for me. Hope this helps!
Best regards,
Fredrik Moell
Tomatis New Zealand
www.tomatis.co.nz
A division of Your Amazing Health Ltd
54 Fancourt Street, Meadowbank, Auckland 1072
0800-TOMATIS (866 2847)
Personal 021-1721 930

LSO Content Player Error - HTTP Error 404 - File or directory not found

Hi All
Please could you assist.
I have published a course to my ISS CMS and configured the links in both ECC and J2EE lsm/mediator.
Result
Username='username', SystemName='HRD', Client='030', Host='22.22.22.22', Language='EN', SystemNumber='00', EnablePoolSharing='true', MaxConnection=50, AbapDebug=false:
CPCFG.RSURL = http://iiscmshost.domain/LSO600/Content/
CPCFG.REPUS = username
ServerURL=http://iiscmshost.domain/LSO600/Content/ ok!
I was able to successfully publish the course from the Authoring Environment to the CMS server.
When selecting the starting the course from the portal with content player i get the following error.
HTTP Error 404 - File or directory not found
But the URL is referring to - http://iiscmshost.domain/lms/mediator/courseview?sid=8685627505550088697845288091101&language=EN&sys=HRD&client=030&sap-accessibility=X
How does directory http://iiscmshost.domain/lms/mediator get created when the content is in http://iiscmshost.domain/LSO600/Content ??
Secondly can I change this reference to my LSO600/Content directory.
Please advise with any information. Point will be awarded.
Regards
Maahir

Dear Maahir,
We are facing the same problem. We are pointing over CMS to IIS, instead of KM content of portal. We are successfully able to release and publish the course, then attach to a course participant also.
But. When participants logs into the portal and click on Start Now. It giving 404 file not found Error. Its the same error. All our Course and content pointed to CMS IIS Server Url.
When we did the content player config test, result is NOT OK. We have required R3 authorization and CMS user authorization also with admin rights. Content Player console is working in AE when we start up the course. Its showing the error.
So, it seems like content player is not working properly. Bcoz we are launching course from http://WEBDAV repository server maintained in back end system. Which is the IIS(CMS Server)for us. Do we need to maintain anything separately to launch a course from IIS Server on R3 and SAP Portal. Below sample URL from page.
http://Sever:port/lms/mediator/courseview = xxxxxxxxxxxxxxx
Could you please us know, how did you resolve the issue and tell me the cause of this issue.
Thanks and Regards
Obli

Sumtotal error 404 - file or directory not found

Hi,
We have a SCORM 1.2 compliant content created using Captivate 5. It's a multiple SCO (6 modules) combined into a single SCORM package. When the package was loaded in Sumtotal LMS, one of the modules alone does not launch and throws the below error.
404 - File or directory not found.
The resource you are looking for might have been removed, had its name changed, or is temporarily unavailable.
However all the modules get loaded when tested in Saba LMS. Any ideas on what could the issue in Sumtotal? Would greatly appreciate a resolution at the earliest.
Thanks,
Sudarsan

r_sudarsan,
I 've seen that error 404 numerous times in the past. It always seems to be related to the configuration of the web server not able to match the Domain name with the IP address, wrong path name, check the spelling, browser startup default settings to locate the website. etc. It always seems to be a configuration problem.
Good Luck.

Hello, i need help i'm doing experiment on ilab i have managed to put my experiment on the platform but when i try to launch it fails with an error 404 that the page not found. any one with idea of what i should do to solve this problem. thank you

hello, i need help i'm doing experiment on ilab i have managed to put my experiment on the platform but when i try to launch it fails with an error 404 that the page not found. any one with idea of what i should do to solve this problem. thank you

hey Sally,
Can you elaborate on the ilab and what you are trying to do? I have found this page to explain error 404, but I am not sure if it directly applies to you
http://digital.ni.com/public.nsf/allkb/D0998D3734926FA08625782300016E40?OpenDocument
Regards,
A. Zaatari
National Instruments
Applications Engineer

FDM Import error : 404 - File or directory not found.

I am trying to import 550,000 rows/records into FDM. I am getting the below error message while doing the import. Any help in resolving this would be appreciateble.
404 - File or directory not found.
The resource you are looking for might have been removed, had its name changed, or is temporarily unavailable.
Thanks

This happens when i import from desktop and not from inbox. I have not tried importing from inbox. I will update the link as soon as i try importing from inbox.
Thanks
ARB

404 -File or directory not found error

We have had several users report the following error message that appears inside the Rich Text Editor that is used for Instructions on the Process Steps of Formulation specs, in 6.1.0.1.32.
+404 -File or directory not found. The resource you are looking for mighthave been removed, had its name changed, or is temporarily unavailable.+
Here's the scenario. They are in edit mode on the Formulation Spec.
They go to the Process tab.
Click A Step, and see that there are several blank lines at the end of the instructions, and they want to clean up this blank space.
So they click the Instructions link, and the Instructions pop-up in a rich text editor.
They click in the editor near the bottom to get a prompt on the last blank line.
They then hit the backspace key to delete the blank lines.
As soon as they hit the backspace key the error is thrown in the editor; Not in an error message popup and no error log is recorded in the event logs.
And to make it even more interesting it doesnt happen all the time!
Has anyone else seen this behavior within Formulation specs?
P.S. Its not the IE pop-up blocker either.

Trey, i just did a quick test and was able to duplicate with the following steps:
1. open instructions
2. instead of clicking in the edit textbox, click below the edit textbox (ie. b/w the textbox and keywords)
3. hit backspace
404
my guess is, users are working quickly, think they click in the textbox, but accidently click outside the textbox. backspace is then trying to register a previous page command.
However, we changed the rich text control in 6.1.1, and it looks like this issue has been corrected.
if you find a different set of steps to recreate that triggers the 404, let us know.
thanks,
-M

Breadcumbs don't work online: '404 - File or directory not found'

Breadcrumbs all work fine when testing my AirHelp application offline on my Windows 7 pc, (or if I access it as online browser based help). However, when I try to test the online Airhelp most of the breadcrumbs return a '404 - File or directory not found' error.
My RoboHelp Project has been created as follows:
1. There is a homepage created inside of RoboHelp
2. Then I have linked a number of framemaker books, for each of which the FM table of contents is being converted to create a new associated TOC.
3. In the master TOC I have added a New TOC Book for each framemaker book (making it a book with a link to a htm), under the New TOC Book I have inserted a TOC placeholder for the appropriate associated TOC.
When the Online AirHelp version is run, the breadcrumbs can only be used to navigate to the homepage and to the New TOC Books at the level immediately beneath the home page. The links to these pages seem to make sense, being of the form:
Breadcrumb
Link
Home
event:homepage.htm
Home/User Guide
event:../../../User_Guide.htm
Where it goes wrong is for the breadcrumbs futher down the path which have links similar to those shown below:
Breadcrumb
Link
Home/User Guide/Introduction
event:introduction.htm
Home/Handbook/Sign_Conventions
event:Sign_Conventions.htm
In both of the above the URL request that is being passed to the online server is not the full path, (it seems to be a relative path?) Is this the reason why the breadcrumbs don't work, and if so can you suggest what I need to do to get them working?
I am up against a deadline, and at the moment the only way forward I have is to abandon the converted Framemaker TOCs and have RoboHelp autocreate a TOC for the whole project for me, however this is not a practical solution because the folder structure is not the same when I do this and would require a great deal of manual editing each time it is rebuilt.
Hoping somebody out there can please assist?
Thanks.

Thanks TP,
I have many public IP's available. Do I need to install the RD Web access role on the DMZ server that has the RD Gateway role even if i have spare public IP's available?
I've basically have this setup "3.1. RD Gateway without AD DS in perimeter network deployment:"
On the below link
http://blogs.msdn.com/b/rds/archive/2009/07/31/rd-gateway-deployment-in-a-perimeter-network-firewall-rules.aspx
currently there's an CNAME record in DNS for remote.external.com which points to Server3.internal.pri
which holds the RD
Connection Broker, RD Licensing and RD Web Access roles
Are you saying to create an A record and point it to Server3.internal.pri
internal IP? I'm not getting certificate errors (yet) so do i have to run the script? i ask this as the error message i'm getting (404 - File or directory not found) doesn't seem to be related to certificates, i'm making changes to a production environment
so i have to be extra carefull!
Cheers!

RD Gateway - 404 - File or directory not found - Remote Desktop Services 2012 R2 - External users

Hi All,
I’m currently deploying RDS to our network, I’ve installed and configured the RD Gateway role – accessing https://remote.external.com/RDWeb internally works fine but not externally. Externally https://remote.external.com reaches the servers default IIS page
but once I put /RDWeb I get the error 404 – File or directory not found.
I’m not sure what’s not configured properly but below is the setup – keep in mind that the internal domain is different to the external FQDN i.e. the server name of the GD Gateway is Server4.internal.pri and the FQDN to access RDS externally is remote.external.com
- Server1.internal.pri Internal Network
RD Session Host
- Server2.internal.pri Internal Network
RD Session Host
- Server3.internal.pri Internal Network
RD Connection Broker, RD Licensing, RD Web Access
- Server4.internal.pri DMZ Network
RD Gateway DMZ IP/ Internal IP
- Certificate for all servers is a wildcard *.external.com
In the RDS Deployment Properties
Deployment Properties> Certificates> all certificates are configured with a wildcard certificate e.g. *.external.com
Deployment Properties> RD Web Access server= server3.internal.pri URL = https:// server3.internal.pri/RDWeb
Deployment Properties> RD Gateway> Server name = remote.external.com – I’ve understood that this is the URL (FQDN) to access RDS and not the RD Gateway servername itself
RD Gateway Manager Properties
Browse and import certificate> *.external.com
Transport Settings> IP address for HTTPS = 192.168.x.x (DMZ IP)
Transport Settings> IP address for UDP = 192.168.x.x (DMZ IP)
IIS
Both the RD Gateway and the Connection Broker have https certificate as *.external.com and in the site bindings https is * for ip addresses, specifying the DMZ IP on the RD Gateway doesn’t fix the issue
DNS, Network, Domain etc..
remote.external.com points the Public IP in DNS with an A record – Public IP is NATed to the RD Gateways DMZ IP on the firewall – RD Gateway is joined to the domain – RD Gateway has another NIC with an internal IP
Firewall
Port 80, 443, 3391 is open from the internet to the RD Gateways DMZ IP, RD Gateway also has an internal IP with full access to the other RDS roles
Errors I receive with the MS Best Practice Analyzer
Problem:
The Remote Desktop Gateway (RD Gateway) server Secure Sockets Layer (SSL) certificate may not have a valid certificate subject name.
Impact:
If the RD Gateway server is configured to use an SSL certificate with a certificate subject name that is not valid, users cannot connect to internal network resources (computers) through the RD Gateway server.
Resolution:
Use the RD Gateway Manager tool to select a valid SSL certificate for the RD Gateway server to use.
Even though I did configure this… seems like it might be from the split DNS
Other
I can access RDS from the RD Gateway box https://remote.external.com and client machines
no certificate errors internally, either externally when I reach the default IIS page of the RD Gateway i.e. https://remote.external.com
Any help is much appreciated!

Thanks TP,
I have many public IP's available. Do I need to install the RD Web access role on the DMZ server that has the RD Gateway role even if i have spare public IP's available?
I've basically have this setup "3.1. RD Gateway without AD DS in perimeter network deployment:"
On the below link
http://blogs.msdn.com/b/rds/archive/2009/07/31/rd-gateway-deployment-in-a-perimeter-network-firewall-rules.aspx
currently there's an CNAME record in DNS for remote.external.com which points to Server3.internal.pri
which holds the RD
Connection Broker, RD Licensing and RD Web Access roles
Are you saying to create an A record and point it to Server3.internal.pri
internal IP? I'm not getting certificate errors (yet) so do i have to run the script? i ask this as the error message i'm getting (404 - File or directory not found) doesn't seem to be related to certificates, i'm making changes to a production environment
so i have to be extra carefull!
Cheers!

Error 1311 source not found

All Basis,
Any idea on this,
When tyring to open a Excel from SAP, the Error 1311 source not found throws up.

hello folks,
I have Windows XP home Firefox v1.0.6.
removed old java in Add/Remove programs.
cleared the "Temporary Internet Files" folder that contained C:\Documents and Settings\Greg\Local Settings\Temporary Internet Files\Content.IE5.
tried to load jre-1_5_0_04-windows-i586-p-iftw.exe for the third time, and the install still hangs up.
J2SE Runtime Environment 5.0 Update Installer Information : Error 1311. Scource file not found: C:\Documents and Settings\Greg\Local Settings\Temporary Internet Files\Content.IE5\2XFKL4VY\je150000[1].cab. Verify that the file exists and that you can access it.
and,
Error 1311. Scource file not found: C:\Documents and Settings\Greg\Local Settings\Temporary Internet Files\Content.IE5\EEIDPHGA\jp150040[1].cab. Verify that the file exists and that you can access it.
here's the thing, I cannot surf to "Content.IE5" folder in my "Local Settings\Temporary Internet Files" folder, but I can plug in the directory in the address bar of Windows Explorer & see the "Content.IE5" folder.
I do not see "je150000[1].cab" or "je150000[1].cab" in there.
Am I using the wrong program to fresh install Java for Firefox in XP?
Is there something wrong with my operating system?
monitoring this thread.....
thanx.

Troubleshooting Lync 2010 404 - File or Directory Not Found

Reading through several posts in this forum about 404 errors, none of the ideas have helped me with this problem
I have a single Lync 2010 server used for IM, Video and Audio conferencing; no voice. Lync 2010 clients work just fine, getting the Web App to work with an emailed meeting link like https ://meet.mydomain.com/username/C32249V3 displays a web page with 404
- File or Directory Not Found. Silverlight is installed, no errors in Event Viewer for Lync, iisreset has no affect.
Open for other ideas to try and places to look at?
AIS

Hi, you can check before with a Ps command like
$cred1 = Get-Credential "litwareinc\kenmyer"
$cred2 = Get-Credential "litwareinc\pilar"
Test-CsWebApp -TargetFqdn atl-cs-001.litwareinc.com -UserSipAddress "sip:[email protected]" -UserCredential $cred1 -User2SipAddress "sip:[email protected]" -User2Credential $cred2
$cred1 = Get-Credential "litwareinc\kenmyer"
$cred2 = Get-Credential "litwareinc\pilar"
Test-CsWebApp -TargetFqdn atl-cs-001.litwareinc.com -UserSipAddress "sip:[email protected]" -UserCredential $cred1 -User2SipAddress "sip:[email protected]" -User2Credential $cred2
TechNet Link
regards Holger Technical Specialist UC

Exchange 2007 - User getting 404 File or directory not found

Exchange 2007 OWA 404 - File or directory not found. I have two database on the same server and this problem is only affecting one database and the user in the other database is fine. I did a test and move the user to the other database and I gave
myself full access to the user mailbox and use OWA (Change mailbox) to access other user and later login as the user itself and everything is fine. I have thousands of user, and doing this is time consuming. Anythough on this?

Hi Tony,
According to the description, I notice that you have a problem on OWA. When logon OWA with users from specific database, get error "Exchange 2007 OWA 404 - File or directory not found".
I suggest check following points.
1. Please make sure OWA Virtual Directory in IIS is available.
2. Please make sure the OWA Virtual Directory in IIS has configured Basic Authentication by default.
3. Please try to re-build OWA VD for testing. I saw someone solved this issue by re-building OWA VD.
4. Since you have tested, moving mailbox to another database can auto-fix this issue, please also try to follow Ed to solve this issue.
Thanks
Mavis Huang
TechNet Community Support

404 - File or directory not found - HFM WORKSPACE

Hello All,
We are seeing the error below when a user logs onto an HFM app.
*"404 - File or directory not found.*
*The resource you are looking for might have been removed, had its name changed, or temporarily unavailable."*
When they click on Administration -> and any menu items, the error goes away and they are able to go to that navigation page.
Could anyone suggest how to prevent this from happening?
Thanks in advance,
Regards,
SM

Ok.
Things to check:
#1 - If it is a default startup item from workspace, you can go to the preferences menu item and change that. (File --> Preferences --> General --> Default Startup Options)
#2 - If the default item is in the reports explorer, check preferences as well. (File --> Preferences --> Explore --> Default Folder
#3 - If none of that works, you can try clearing out the user preferences for the user by looking at the HFM database. Go to the following table : <app name>_USERPARAMS and pull all records that match the username (DB field = username) in question. You can remove those rows from the table and it will reset that user's preferences. I THINK HsvSystemInfo_LastContentSrc points to the last item they were using and deleting that might be sufficient, but I haven't had to do this in a while so I cannot say for sure.....

404 error OA_HTML/AppsLogin not found on fresh clone Pls Help

Similar Messages

Maybe you are looking for