404 Not Found Error while testing INTEGRATION_DIRECTORY_HMI

Hi,
I am installing XI 3.0 SR1 on Win2000 sp4. I got struck at page 40 of installation guide trying to configure rfc destination INTEGRATION_DIRECTORY_HMI. I gave all the parameters as specified in the guide and clicked on "Test". I am getting the 404 Not Found error. The detalied error log is attached below. Can some one please let me know what could be the reason for the error?
Thanks
Sireesha
HEADER NAME                HEADER VALUE
~response_line               HTTP/1.1 404 Not Found
~server_protocol             HTTP/1.1
~status_code                 404
~status_reason               Not Found
connection                   close
pragma                       no-cache
cache-control                no-cache
expires                      0
content-type                 text/html
content-length               1539
server                       SAP J2EE Engine/6.40
date                         Fri, 03 Feb 2006 04:00:56 GMT
HTTP BODY
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <html>
<head> <title>Error Report</title> <style> td {font-family : Arial,
Tahoma, Helvetica, sans-serif; font-size : 14px;} A:link A:visited A:active </style
> </head> <body marginwidth="0" marginheight="0" leftmargin="0" topmar
gin="0" rightmargin="0"> <table width="100%" cellspacing="0" cellpaddin
g="0" border="0" align="left" height="75"> <tr bgcolor="#FFFFFF">
<td align="left" colspan="2" height="48"><font face="Arial, Verdana, Hel
vetica" size="4" color="#666666"><b>  404 &nbsp Not Found</b><
/font></td> </tr> <tr bgcolor="#3F73A3">     <td height="23" width="8
4"><img width=1 height=1 border=0 alt=""></td>     <td height="23"><img
width=1 height=1 border=0 alt=""></td>     <td align="right" height="2
3"><font face="Arial, Verdana, Helvetica" size="2" color="#FFFFFF"><b>SA
P J2EE Engine/6.40 </b></font></td> </tr> <tr bgcolor="#9DCDFD">
    <td height="4" colspan="3"><img width=1 height=1 border=0 alt=""></
td> </tr> </table> <br><br><br><br><br><br> <p><font face="Arial, Ve
rdana, Helvetica" size="3" color="#000000"><b>  The requested
resource does not exist.</b></font></p> <p><font face="Arial, Verdana,
Helvetica" size="2" color="#000000"><table><tr><td valign="top"><b>&nbsp
;Details:</b></td><td valign="top"><PRE>Go to <A HREF="/" target="_paren
t">main page</A> of this application!</PRE></font></td></tr></table></fo
nt></p> </body> </html>
Time (ms)                                134

Hi Sireesha -
>>>As per your suggestion. I am trying to reinstall the XI Component again. But the setup is not asking me for any uninstallation of the existing setup nor any message saying that you already have the XI Component installed. Does it mean that the XI Component got deleted automatically?
It's hard for me to say not being able to see your system, but here are some things you can check:
- check link http://<xi_host>:<j2ee_port>/sap/monitoring/ComponentInfo
You should be able to see components like SAP_XITOOL, SAP_XIAF, SAP_XIAFC which would indicate that XI components are installed. You need role SAP_J2EE_ADMIN to access this.
- Using SDM, you can see what's currently deployed in the SDM repository for XI related components.
- Using Visual Admin, you can look for XI related services within the Server instance.
But in any case, try reinstalling the XI Java components (which is really what you're installing following the SR1 Installation Guide). If you run into problems during the installation and it's possibly due to already existing XI components, I would recommend, cleaning the slate and uninstalling the J2EE Add-in and starting again from the J2EE add-in part. Instructions for deleting the add-in are in the corresponding WebAS Java 6.40 <platform/db> install guide (in the last section - "Additional Information").
Regarding the central adapter engine, yes, this is installed automatically when you do the main installation of the XI Java components. Instructions in the SR1 guide specifically referring to the Adapter Engine are for a decentral adapter engine.
Hope that helps.
Best regards,
Jin

Similar Messages

404 Not Found error while playing the test

Hi All,
I am getting 404 not found error when the click "continue" in content player for WBT courses in learning portal but if i close it and then try to launch the test gagin it plays fine, I don't know what is causing this to happen at first shot. Pls let me know.
Thanks in advance

Hi,
You can also have a look at this Wiki page:
https://wiki.sdn.sap.com/wiki/x/6Qs
You will find useful information there as well.
Kind regards,
Andrzej

HTTP 404 not found Error while click on Tab

Hi All,
Please help us as we are facing issue in Prodution.
We are using Apex 3.0.1 version. our appication having 1 parent tab and 4 child tabs. parent tab working fine and 3 child tabs are working fine but while click on 4th child tab we are getting HTTP 404 not found error.
The detials in tab/page
it has 4 reports and 5 Iteams and 1 Hidden iteams.
We are not able to find out the issue please help us.
Thanks,

Yes Scoot,
i do understand that 1 hour is not sufficient to answer in forum but my situation is strange.
To take a wild stab in the dark - how do you define your links in the tab set? Are you linking to a page in the application or your own URL?
Kumar: I have linked to pages in Appication. In same appication rest of the TAB's are working fine with respective linked pages but only one TAB is not working, getting error.
URL is same for all pages/Tabs, i don't think URL is the issue here.
Please help me to get exact error so that i can resolve the issue my own. is there any possibilities to find out the errors in backend tables or elase files.
Kumar.

Getting 404 not found error-while creating classic report - after sql query

my work space - upgrade
while iam trying to develop a page today in work space - under classic report - after i provided the query and when pressed next to go to report attribuites section - iam facing 404 not found issue.,
this is happening just today.
and all teh other pages are working fine - do not know what ios the issue - can anybody help me here please..
query used for classic report
select DISTINCT cust.customer,prod.ebs_team
from
CUSTOMER_11i@upgrade Cust
,BUG_PRODUCTS@upgrade PROD
where 1=1
and cust.product_id = prod.product_id
and prod.prodline = 'EBS'
and IS_CUST_11 = 'YES'
and NVL(IS_CUST_121,'NO') = 'NO'
and NVL(IS_CUST_12,'NO') = 'NO'
order by 1;
with regards
Shiva Prasad.k
Edited by: user759720 on Feb 14, 2012 5:00 AM

Hi Shiva,
to diagnose a 404 error please have a look at http://www.inside-oracle-apex.com/oracle-apex-got-404-not-found-2/
This should give you sufficient information to find out what is actually failing.
Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

HTTP/1.1: 10.4.5 404 Not Found Error while accessing the odsm url

Hi experts,
I 've installed OID 11.1.1.6 on weblogic server 10.6.. on Oracle linux 6.0
The Installation went fine And I am able to lauch the odsm default url http:\\localhost:7005/odsm and even chnaged the cn=orcladmin User password.
Also created few user and Groups using odsm,
However when i tried to access the odsm url after restarting the Admin & managed server . I am unable to access the odsm url. for that i tired to deploy the odsm.ear on Admin server but it failed getting the following error.
in the Adminserver.log file
2013 8:33:59 AM IST> <Error> <Console> <idm.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <> <1371956639366> <BEA-240003> <Console encountered the following error weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: adf.oracle.domain, exact-match: false].
        at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(CheckLibraryReferenceFlow.java:26)
        at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
        at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
        at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
        at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:59)
        at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
        at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
        at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:208)
        at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:98)
        at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperati
<Warning> <Deployer> <idm.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1371956639265> <BEA-149004> <Failures were detected while initiating deploy task for application 'odsm [Version=11.1.1.2.0]'.>
####<Jun 23, 2013 8:33:59 AM IST> <Warning> <Deployer> <idm.oracle.com> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1371956639268> <BEA-149078> <Stack trace for message 149004
And in wls_ods1.log file got the following error
<BEA-149265> <Failure occurred in the execution of deployment request with ID '1371955199392' for task '0'. Error is: 'weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: adf.oracle.domain, exact-match: false].'
weblogic.management.DeploymentException: [J2EE:160149]Error while processing library references. Unresolved application library references, defined in weblogic-application.xml: [Extension-Name: adf.oracle.domain, exact-match: false].
        at weblogic.application.internal.flow.CheckLibraryReferenceFlow.prepare(CheckLibraryReferenceFlow.java:26)
        at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:648)
        at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
        at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:191)
    Than i tired to deploy the odsm.ear on managed server i.e wls_ods1 and later on both but got the same error.
   Also There is no issue with the oidsrv or oidladpd proccess as with the start/stop of oid* related proccesses using opmnctl
   Please see the following.
e@idm stage]$ oidctl connect=OIDDB status -diag
oidctl : INSTANCE_NAME   is not set, defaulting to inst1
oidctl : COMPONENT_NAME is not set, defaulting to oid1
NLS_LANG not set in environment
Setting NLS_LANG to AMERICAN_AMERICA.AL32UTF8
+--------------------------------------------------------------------------+
| Process      | PID   |   InstName    | CompName   |Inst#| Port | Sport |
+--------------------------------------------------------------------------+
| oidmon       | 25968 |      asinst_1 |        oid3 |    0|      |       |
+--------------------------------------------------------------------------+
| oidldapd disp| 26010 |      asinst_1 |        oid3 |    1| 3060 | 3131 |
| oidldapd serv| 26021 |      asinst_1 |        oid3 |    1| 3060 | 3131 |
| Config   DN | cn=oid3,cn=osdldapd,cn=subconfigsubentry                  |
+--------------------------------------------------------------------------+
+--------------------------------------------------------------------------+
|Printing LDAP Operation in progress status ...                          |
+--------------------------------------------------------------------------+
    OIDLDAPD_PID: 26021 WorkerID: 9 DBSID: 263 DBPID: 26075 ==> IDLE
+--------------------------------------------------------------------------+
    OIDLDAPD_PID: 26021 WorkerID: 11 DBSID: 527 DBPID: 26078 ==> IDLE
+--------------------------------------------------------------------------+
    OIDLDAPD_PID: 26021 WorkerID: 8 DBSID: 8 DBPID: 26080 ==> IDLE
+--------------------------------------------------------------------------+
    OIDLDAPD_PID: 26021 WorkerID: 13 DBSID: 133 DBPID: 26108 ==> IDLE
+--------------------------------------------------------------------------+
    OIDLDAPD_PID: 26021 WorkerID: 10 DBSID: 526 DBPID: 26056 ==> IDLE
+--------------------------------------------------------------------------+
    OIDLDAPD_PID: 26021 WorkerID: 12 DBSID: 650 DBPID: 26058 ==> IDLE
+--------------------------------------------------------------------------+
          Cache Max Size                     : 209716224
          Max Entries configured             : 100000
          Max Entries cached                 : 0
          Num Entries in Cache               : 0
          Num Entries in GC                  : 0
          Page size                          : 102392
          Entry cache Hit count              : 0
          Entry cache Mis count              : 0
          Hash Area bytes used               : 13031472
          Hash Area blocks used              : 138
          ResultSet cache bytes used         : 0
          Resultset cache blocks used        : 0
          Entry cache bytes used             : 0
Cache memory used
: 13031472
[oracle@idm stage]$ opmnctl status -l
Processes in Instance: asinst_1
---------------------------------+--------------------+---------+----------+------------+----------+-----------+------
ias-component
| process-type
|
pid | status   |
uid | memused |
uptime | ports
---------------------------------+--------------------+---------+----------+------------+----------+-----------+------
ohs1
| OHS
|   25970 | Alive
|
1803561142 | 2127440 | 38:11:26 | https:9999,https:4443,http:7777
oid3
| oidldapd
|   26021 | Alive
|
1803561144 | 1425784 | 38:11:26 | N/A
oid3
| oidldapd
|   26010 | Alive
|
1803561143 |   435572 | 38:11:26 | N/A
oid3
| oidmon
|   25968 | Alive
|
1803561141 |   888088 | 38:11:26 | LDAPS:3131,LDAP:3060
EMAGENT
| EMAGENT
|   25967 | Alive
|
1803561140 |   106100 | 38:11:26 | N/A
$ netstat -an |grep 3060
tcp
0
0 :::3060
LISTEN
[oracle@idm stage]$ ps -ef |grep 3060
oracle
7368 2130 0 05:53 pts/0
00:00:00 grep 3060
oracle   26021
1 9 Jun24 ?
03:33:54 oidldapd
control=26010 connect=oiddb debug=0 configset=0 instance=1 key=26748
host=idm.oracle.com logchange=TRUE port=3060 sport=3131
[oracle@idm stage]$ tnsping OIDDB
TNS Ping Utility for Linux: Version 11.1.0.7.0 - Production on 26-JUN-2013
05:53:20
Copyright (c) 1997, 2008, Oracle. All rights reserved.
Used parameter files:
/idm/Middleware/Oracle_IDM2/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact
(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=idm.oracle.com)(PORT=1521))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=idmoid.oracle.com)))
OK (0 msec)
Also I am able to access oracle HTTP server web page i.e
http://idm.oracle.com:7777/
Could anyone suggest as why after restarting the server am not able to access the odsm url and getting error in deploying the odsm.ear file.
Also after struggling with this error for 3 days i tried to Reinstall the oid after completely uninstalling it. But as soon as i restarted the server The odsm url become inaccessible
and getting the same Old error.
   Also one Important things that i observed that before restarting the Admin & managed server when the odsm url was accessible when i do grep the port 3060 i.e
root@idm config]# netstat -an |grep 3060
tcp        0      0 :::3060                     :::*
LISTEN
tcp        0      0 ::ffff:192.168.122.13:3060 ::ffff:192.168.122.13:24645
ESTABLISHED
tcp        0      0 ::ffff:192.168.122.13:24645 ::ffff:192.168.122.13:3060
ESTABLISHED
tcp        0      0 ::ffff:192.168.122.13:3060 ::ffff:192.168.122.13:58065
ESTABLISHED
tcp        0      0 ::ffff:192.168.122.13:58065 ::ffff:192.168.122.13:3060
ESTABLISHED
After the restart of server i got this output of 3060 port
$ netstat -an |grep 3060
tcp
0
0 :::3060
LISTEN
I could not understand why this truncated output of 3060 port even though all opmn manged proccess working fine as it's obvious from the out put from
$ oidctl connect=OIDDB status -diag And $ opmnctl status -l commands output which i 've posted above.
and am able start/stop oid related proccess from opmnct command
Please Help. as am really struggling to work around the issue.
Thanks & Regards
Priya

If what that guys said about it being :7001/em doesn't work, When you configured your domain did you check the box that says Oracle Enterprise Manager. We had the same thing happen to us one time and it's because we didn't install it you have to check that box for it to be installed.

Can't do online banking. Get error message. "The requested URL /Summary.cgi was not found on this server. Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.

I can't do online banking. When I try to open the page I get error "The requested URL /Summary.cgi was not found on this server.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.

Hi,
These blog posts might help debug problem
Oracle APEX: Got a 404 Not Found? | Inside Oracle APEX by Patrick Wolf
daust_de :: Oracle XE / APEX: Troubleshooting the 404-not found error on XE
Regards,
Jari

404 Not Found error was encountered while trying to use an ErrorDocument to handle the request

When I try to go to my website, I get a blank screen and this message:
Method Not Implemented
GET to / not supported.
Additionally, a 404 Not Found error was encountered while trying to use an ErrorDocument to handle the request.
Can anyone help me fix this bug, please? Thanks!

I did as you said and it worked magic! I didn't even have to restart Mozilla. Thank you so much for your help! :-)

Sender Soap scenario HTTP/1.1 404 Not Found error

Hello All,
I created SOAP to IDOC scenario, generated the WSDL file from Sender agreement and while testing the interface using SOAPUI tool iam getting HTTP/1.1 404 Not Found error.
i gave login authorization details in the SOAPUI tool.
Update: when i generated the WSDL file from sender agrement, in the URL the port number was 443.
when i check the port numer in SMICM transaction it show 50000.
Now when i test with port numer 443 iam getting Connction refused error.
Regards,
Chinna
Edited by: chinnasapxi on Mar 4, 2011 6:44 AM

i created the URl and when i tested the from SOAP UI below is the error detials.
Fri Mar 04 11:32:08 IST 2011:ERROR:com.eviware.soapui.model.iface.Request$SubmitException: com.eviware.soapui.impl.wsdl.submit.RequestTransportRegistry$MissingTransportException: Missing transport for protocol [ http]
   com.eviware.soapui.model.iface.Request$SubmitException: com.eviware.soapui.impl.wsdl.submit.RequestTransportRegistry$MissingTransportException: Missing transport for protocol [ http]
        at com.eviware.soapui.impl.wsdl.WsdlRequest.submit(WsdlRequest.java:241)
        at com.eviware.soapui.impl.wsdl.panels.request.AbstractWsdlRequestDesktopPanel.doSubmit(AbstractWsdlRequestDesktopPanel.java:146)
        at com.eviware.soapui.impl.support.panels.AbstractHttpRequestDesktopPanel.onSubmit(AbstractHttpRequestDesktopPanel.java:777)
        at com.eviware.soapui.impl.support.panels.AbstractHttpRequestDesktopPanel$SubmitAction.actionPerformed(AbstractHttpRequestDesktopPanel.java:488)
        at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
        at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
        at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
        at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
        at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
        at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
        at java.awt.Component.processMouseEvent(Unknown Source)
        at javax.swing.JComponent.processMouseEvent(Unknown Source)
        at java.awt.Component.processEvent(Unknown Source)
        at java.awt.Container.processEvent(Unknown Source)
        at java.awt.Component.dispatchEventImpl(Unknown Source)
        at java.awt.Container.dispatchEventImpl(Unknown Source)
        at java.awt.Component.dispatchEvent(Unknown Source)
        at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
        at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
        at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
        at java.awt.Container.dispatchEventImpl(Unknown Source)
        at java.awt.Window.dispatchEventImpl(Unknown Source)
        at java.awt.Component.dispatchEvent(Unknown Source)
        at java.awt.EventQueue.dispatchEvent(Unknown Source)
        at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
        at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
        at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
        at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
        at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
        at java.awt.EventDispatchThread.run(Unknown Source)

Page not found Error while open install app

I go through the all necessary steps to configure app domain & steps to create SharePoint hosted app still got 'page not found error'
The final app URL that i got afte r open install app -"http://app-125e72eedbe144.domain name:9922/FirstApp/Pages/Default.aspx?SPHostUrl=http%3A%2F%2Fsp1%3A9922&SPLanguage=en-US&SPClientTag=6&SPProductNumber=15.0.4420.1017&SPAppWebUrl=http%3A%2F%2Fapp-125e72eedbe144.domainname%3A9922%2FFirstApp"
i don't understand where i did mistake can any one help me to resolve that issue.

Hi,
According to your post, my understanding is that you get the “page not found” error while you open install app.
You need to have a SharePoint Web Application that is bonded to port 80 without a host header.
If you want to run it on https (SSL) then you also need to add an extra binding for SharePoint Hosted Apps to work.
For more information, please refer to:
Troubleshooting SharePoint 2013 Hosted Apps on-premises: “404 not found” error
404 & 401 Errors with the App Management Service - SharePoint
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Dynamic Pages & Parameters - 404 Not Found Error

I have the following dynamic page:
declare
M_subject varchar2(2000):= :message_subject;
begin
htp.print(''||M_subject||'');
htp.print('This is a Test - Passing a parameter to a Dynamic Page');
htp.p('Value: ' || M_subject);
end;
I also have another dynamic page that calls the above page and passes a parameter to it. And it works,..that is, the parameter gets passed to the page above, is assigned to M_subject and correctly prints on the screen.
The problem is that i want to do more then just simply print the variable, in particular, i'd like to use it in a sql query.
But when i add the following code into the above page
thebody varchar(2000);
select subject into thebody from MyTable where subject = M_subject;
htp.print(''||thebody||'');
it won't work. It compiles correctly but when i run the first dynamic page and call this 2nd page, i get a 404 Not Found error. Very strange because the page is definitely there.
So is there anything obvisous that i'm not doing correctly? Is my query not structured properly? Why can't i use this variable for something useful instead of just simply printing it on the screen?
Any comments, suggestions, fixes or ideas would be greatly appreciated.
thanks
chris

Put debug on on the application server for the dad you're using.
The error you are encountering will appear instead of the 404 not found error.
How:
in the home of your application server update the file
$ashome/Apache/modplsql:/conf/dads.conf
put ' PlsqlErrorStyle DebugStyle' in the dad you're using.
restart the application server, retry your dynamic page and the sql error will appear.

OpenBinaryDirect returns 404 Not Found Error

Hi All,
I am trying to download a given document from a SharePoint Online library in an aspx page.
I have the URL of a document, that when navigated to in a browser begins a download of the document in question (so it's definitely the correct one!), however when I use that same URL in OpenBinaryDirect, I am faced with a 404: Not Found error. Below is
the entire stack trace
Stack Trace: at System.Net.HttpWebRequest.GetResponse() at Microsoft.SharePoint.Client.SPWebRequestExecutor.Execute() at Microsoft.SharePoint.Client.File.OpenBinaryDirect(ClientContext context, String serverRelativeUrl) at Convert_Web_Service.Convert.Page_Load(Object sender, EventArgs e) at System.Web.UI.Control.LoadRecursive() at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
I have tried suggestions from the other posts from blogs and this forum, created and re-created, encoded and decoded, but I still get this error no matter what I try.
Is there a particular format, or processing path for SharePoint Online, or connecting through a web service in this way?
Thanks :)

Hi,
According to your post, an error occurred when you download document file from SharePoint Online using Client Object Model.
Please check whether you have authenticated in your code.
http://www.wictorwilen.se/Post/How-to-do-active-authentication-to-Office-365-and-SharePoint-Online.aspx
The following code snippet for your reference:
public static void GetFileBinary_ClientOM(string fileUrlPath, string localFileNamePath)
Uri fileUrl = new Uri(fileUrlPath);
int position = 1;
int bufferSize = 200000;
ClientContext clientContext = new ClientContext(fileUrl.GetComponents(UriComponents.SchemeAndServer, UriFormat.UriEscaped));
using (FileInformation fileInfo = File.OpenBinaryDirect(clientContext, Uri.UnescapeDataString(fileUrl.AbsolutePath)))
if (IO.File.Exists(localFileNamePath)) IO.File.Delete(localFileNamePath);
fileInfo.Stream.ReadTimeout = 120000;
Byte[] readBuffer = new Byte[bufferSize];
using (IO.Stream s = IO.File.Create(localFileNamePath))
while (position > 0)
position = fileInfo.Stream.Read(readBuffer, 0, bufferSize);
s.Write(readBuffer, 0, position);
readBuffer = new Byte[bufferSize];
fileInfo.Stream.Flush();
s.Flush();
We can also use copy web service to download documents.
http://nikpatel.net/2010/04/12/download-and-upload-the-sharepoint-documents-using-the-sharepoint-copy-web-service/
More information:
Remote Authentication in SharePoint Online Using the Client Object Model
http://code.msdn.microsoft.com/office365/Remote-Authentication-in-b7b6f43c
Best Regards
Dennis Guo
TechNet Community Support

Class not found error while accessing a Web Service

Hi All,
Im getting a Class not found error while doing method calls of a third party API.
The required jars(axis.jar) are set in the weblogic 8.1 classpath and I tried putting those jars(axis.jar) in my application lib folder also, but dint help. Please help me with a solution.
I'll paste the exception logs here by
java.lang.NoClassDefFoundError: org/apache/axis/AxisFault
at java.lang.ClassLoader.defineClass(Ljava/lang/String;[BIILjava/security/ProtectionDomain;)Ljava/lang/Class;(Unknown Source)
        at java.security.SecureClassLoader.defineClass(Ljava/lang/String;[BIILjava/security/CodeSource;)Ljava/lang/Class;(SecureClassLoader.java:123)
        at java.net.URLClassLoader.defineClass(Ljava/lang/String;Lsun/misc/Resource;)Ljava/lang/Class;(URLClassLoader.java:251)
        at java.net.URLClassLoader.access$100(Ljava/net/URLClassLoader;Ljava/lang/String;Lsun/misc/Resource;)Ljava/lang/Class;(URLClassLoader.java:55)
        at java.net.URLClassLoader$1.run()Ljava/lang/Object;(URLClassLoader.java:194)
        at jrockit.vm.AccessController.do_privileged_exc(Ljava/security/PrivilegedExceptionAction;Ljava/security/AccessControlContext;I)Ljava/lang/Object;(Unknown Source)
        at jrockit.vm.AccessController.doPrivileged(Ljava/security/PrivilegedExceptionAction;Ljava/security/AccessControlContext;)Ljava/lang/Object;(Unknown Source)
Thanks
Noufal

Hi,
Verify the 3rd party class files names are correctly written in your program. Sometimes wrong case might be the reason.
bye for now
sat

Operation not found error while calling AM methods from managed bean

Hi,
operation not found error while calling AM methods from managed bean.
written a method with two parameters in AM.
exposed the method in AM client interface
in the page bindings added the method in method action ..left empty in the value fields of the parameters.
calling the method from managed bean like below
String userNameVal = (String)userName.getValue();
String passwordVal = (String)password.getValue();
OperationBinding operationBinding =
ADFUtils.findOperation("verifyLogin");
operationBinding.getParamsMap().put("userName",userNameVal);
operationBinding.getParamsMap().put("password",passwordVal);
operationBinding.execute();
i am getting operation verifyLogin not found error.Please suggest me something to do.
Thanks
Satya

Hi vlsn,
Can you try with the below code
// in your backing bean
OperationBinding operation = bindings.getOperationBinding("verifyLogin");
//Put your both parameters here
operation.getParamsMap().put("parameter_name1", parameterValue1);
operation.getParamsMap().put("parameter_name2", parameterValue2);
operation.execute();
if (operation.getResult() != null) {
Boolean result = (Boolean) operation.getResult();
and share the result.
regards,
Rajan

404 Not Found, Error: The requested resource does not exist.

Hi all,
When I try to access VC with the http://localhost:50400/vc where 04 is the CE1 instance, it returns the following error:
404 Not Found
Error: The requested resource does not exist.
Any clues. Just to add that the CE1 servers are running green and nwa is accessible on same url.
Regards.

Hi
Try with following link (VC should be in Caps) -
http://localhost:50400/VC/default.jsp
Also check whether you have proper admin roles assigned to your user id.
Regards
Sandeep
Edited by: Sandeep Patki on Sep 16, 2009 8:47 AM

HTTP 404 Not Found Error in Process Control Mail

Hi All,
I am working on version 9.3.3
I have setup e-mail alerts through a SMTP server.
When I am going on Process control and starting the cycle OR promoting to any level, I am getting a Minimized window showing HTTP 404 Not Found error and Mail is not going.
Whereas My ICP mail alerts are working fine
Please suggest something to resolve.
Regards,
Jai

Hi Jai,
Check the below documents, which might be helpful to you.
Financial Management Error "Server object error ASP 0177 : 80131040" When Sending Email Alerts (Doc ID 830823.1)
Financial Management Error "HTTP 500 Internal Server Error" in Process Management E-Mail Alerting (Doc ID 855942.1)
Process Control Email Alerts Are Not Working For Certain Entities and Entity Hierarchies (Doc ID 1160594.1)
Hope this helps,
Thank you,
Charles Babu J
Edited by: CJX on Jan 30, 2012 7:08 AM

404 Not Found Error while testing INTEGRATION_DIRECTORY_HMI

Similar Messages

Maybe you are looking for