404 Not found for amd64_db_9204_Disk1.cpio.gz download link.
This has been broken all day. I spoke with someone in support earlier who told me that it would be fixed by "this afternoon". It is now evening in Redwood City.
Please reply, OTN Support Team --is there an ETA for this being fixed?
Thanks in Advance.
How did you unpack it -
with the example given on OTN download page
cpio -idmv < Linux9i_Disk1.cpio.gz
or using some other utility - for example mc under linux.
Unpacking it with mc gives exactly the results you described - don't ask why.
use cpio with the syntax displayed above - that is you must use it with "<" redirecting the input.
Regards.
Zlatko Mesaros
Similar Messages
-
Hello,
I am in the processing porting a J2EE based application deployed originally in OC4J to WLS. I am not changing anything as far as J2EE/Web configuration files such as web.xml. Whenever I hit the URL of the application, I am getting the below exception.
What does usually "java.io.FileNotFoundException: Response: '404: Not Found' for url...." indicate?
If you could please give me some pointers to narrow down the places to look, I would appreciate it.
Thanks,
Mustafa
java.io.FileNotFoundException: Response: '404: Not Found' for url: 'http://cayc
001geo1:7001/IUS_Editor/mapservlet'
at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnectionjava:487)
at weblogic.net.http.SOAPHttpURLConnection.getInputStream(SOAPHttpURLConection.java:37)
at oracle.lbs.mapclient.MapViewer.getXMLResponse(MapViewer.java:6013)
at oracle.lbs.mapclient.MapViewer.getDataSources(MapViewer.java:629)
at gov.census.geo.maftiger.interactiveupdate.navigation.mapservlet.ISGegraphyController.getMapviewerDS(ISGeographyController.java:730)
at gov.census.geo.maftiger.interactiveupdate.navigation.mapservlet.ISGegraphyController.doPost(ISGeographyController.java:161)
at gov.census.geo.maftiger.interactiveupdate.navigation.mapservlet.ISGegraphyController.doGet(ISGeographyController.java:73)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.ru(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurtyHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.ja
a:300)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.ja
a:184)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActiHello,
I was able to sort out this issue. I was comparing the web.xml and found out that the servlet-mapping was missing.
Thanks,
Mustafa -
Oracle EB Tax - 404 Not found for Learn more Topic.
Hi,
We are facing following errors on Learn more topics page. If someone could please help or give some direction that would be great. Thanks.
I am getting following error by following bullet points
Login to Oracle EBS
Click TaxManagers
Under Tax Configuration Heading click Tax Regimes or Taxes or Tax Statues
On right side it gives you definition for Regimes/Taxes/Tax Statues and there is link "Learn More"
When I Click Learn More and following error occurs.
404 Not Found
Resource /OA_HTML/@ZX_TAX_SEARCH not found on this serverHi
I found this information on EBS website. It seems patch was applied on 31-MARCH-2009. Any input on this?
Patch Name
Patch Description
Merged Patches
APPL_TOP Name
Language
Completion Date
Details
6746000.R12
12.1.1 iHelp Upgrade Driver - ONLINE HELP FOR ORACLE APPLICATIONS RELEASE 12
No
ap6002bld
US
31-Mar-2009 23:40:45 -
Error 404 not found for PAPIWS Console deployed in WLS
Hi, All,
I created 07-papiws-wls103-XAFDIDS.ear in OBPM 10.3.1 Admin Center, and deploy it to WLS 10.3 successfully.
The problem is when I try to access PAPIWS console by http://192.168.48.1:8901/papiws/PapiWebService, Error 404 not found reported.
Any ideas? Thanks in advanced.
Best Regards,
BillLet's start by clearing up some confusion.
PORTS
In version 11.1.1.x here are how the common ports are defined by default:
1. HTTP Server - 8888
2. WLS_FORMS - 9001
3. WLS_REPORTS - 9002
4. WLS Admin Server - 7001
So, if you understand how ports work in general, you should see that there are two ways to run a form. You can either go through HTTP Server or call WLS_FORMS directly. This means that both of the following would work, although one would be a direct path and the other would route the request through the HTTP Server:
<li>http://ie1fdtfc5zl1s:9001/forms/frmservlet?config=frmdemo
<li>http://ie1fdtfc5zl1s:8888/forms/frmservlet?config=frmdemo
Port 7001, will always be the Admin Server port by default for the Classic domain. By default, the only thing you can do from here is access EM or WLS Console.
As for the tns issue, by default, both the Builder and runtime will expect to find tnsnames.ora in the Instance Home \config so be sure you are adding the correct entries to the correct file.
You can hard code a path to the file which you prefer be used by setting TNS_ADMIN in default.env (e.g. TNS_ADMIN=C:\Oracle\mytnsdirectory). This will apply only to running forms and not the Builder.
Also, here is something which often is confusing to many people.... just because you launched your form from the Builder does not mean that the running form has anything to do with the Builder at that point. In other words, when you click on the RunForm button in the builder all you are doing is passing a url to a browser. The browser and the form are not using any of the Builder's settings except those which may have been passed in the URL (e.g. username/password). ALL running forms are considered "runtime". This means all of the environment configuration information for a running form will need to be set in default.env. The Builder, on the other hand will rely on the System variable, Windows Registry (or shell if on Unix). -
404 not found error from BB Protect download
Hi,
My sync/charge contact has broken off, so I am trying to download Blackberry Protect directly onto the phone. Every the browser seems to work fine, but every time I click 'Download Protect', whether from Google or within Blackberry's site logged on with BlackberryID, I get the 404 : Not found error on my phone.
Is it impossible to download directly, do Blackberry have a problem with downloads at the moment or is there another issue?
Thanks,
TomHi,
My sync/charge contact has broken off, so I am trying to download Blackberry Protect directly onto the phone. Every the browser seems to work fine, but every time I click 'Download Protect', whether from Google or within Blackberry's site logged on with BlackberryID, I get the 404 : Not found error on my phone.
Is it impossible to download directly, do Blackberry have a problem with downloads at the moment or is there another issue?
Thanks,
Tom -
WL6.1 : Get '404 : File not found' for all WARs
I had some web applications deployed which were running perfectly. Now suddenly
, I get '404 - File not found' for any URL - including the server root, i.e. http://localhost/
I was able to access admin console using http://localhost/console. I checked the
config of each application & couldn't find anything wrong.
Finally I had to re-deploy the WARs to get some applications running.
However, I am still unable to get the Default Web App running - the one handling
server root path.. (I've checked the server config & it shows DefaultWebApp as
the default application).
Any pointers on what could be wrong / correction needed ?
TIA,
SubodhCreate a subdirectory called 'classes' and copy your servlet class file
to the 'classes' dir.
mydomain/applications/
DefaultWebApp/
WEB-INF/classes.
Modify the web.xml file located in the mydomain/applications/
DefaultWebApp/
WEB-INF/ directory
<web-app>
<servlet>
<servlet-name>
myServlet
</servlet-name>
<servlet-class>
package.name.myServlet
</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>
myServlet
</servlet-name>
<url-pattern>
servlet-url-pattern
</url-pattern>
</servlet-mapping>
</web-app>
Start the default WebLogic Server.
Call your servlet from a Web browser with the following URL:
http://localhost:port/servlet-url-pattern
servlet-url-pattern is the value of the <url-pattern> element that you
defined in the web.xml file.
prakash wrote:
> Hi everybody ,I have this web app on weblogic 7 .The application
> works file with Tomcat 4.0 but on WebLogic server 7,I am getting
> 404 not found for all the servlets ,although weblogic is serving
> the html files without any problems
-
404 file not found ,for servlets in a web app but not for html files
Hi everybody ,I have this web app on weblogic 7 .The application
works file with Tomcat 4.0 but on WebLogic server 7,I am getting
404 not found for all the servlets ,although weblogic is serving
the html files without any problems
Create a subdirectory called 'classes' and copy your servlet class file
to the 'classes' dir.
mydomain/applications/
DefaultWebApp/
WEB-INF/classes.
Modify the web.xml file located in the mydomain/applications/
DefaultWebApp/
WEB-INF/ directory
<web-app>
<servlet>
<servlet-name>
myServlet
</servlet-name>
<servlet-class>
package.name.myServlet
</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>
myServlet
</servlet-name>
<url-pattern>
servlet-url-pattern
</url-pattern>
</servlet-mapping>
</web-app>
Start the default WebLogic Server.
Call your servlet from a Web browser with the following URL:
http://localhost:port/servlet-url-pattern
servlet-url-pattern is the value of the <url-pattern> element that you
defined in the web.xml file.
prakash wrote:
> Hi everybody ,I have this web app on weblogic 7 .The application
> works file with Tomcat 4.0 but on WebLogic server 7,I am getting
> 404 not found for all the servlets ,although weblogic is serving
> the html files without any problems
-
FLOW_EXCEL_OUTPUT_RegionID generating 404 Not Found error
Hello,
I've tried using the FLOW_EXCEL_OUTPUT option to download a report into CSV:
+<--a href="f?p=&APP_ID.:14:&SESSION.:FLOW_EXCEL_OUTPUT_R30061016791424464"-->Download<--/a-->+
or +<--a href="f?p=&APP_ID.:14:&SESSION.:FLOW_EXCEL_OUTPUT_R&P_REGION_ID."-->Download<--/a-->+ if I'm taking the region id dynamically, p_region_id's default value:
SELECT region_id FROM apex_application_page_regions
WHERE application_id = :app_id AND page_id = :app_page_id AND region_name = 'CSV export'
The problem is if I try to download it (for example using Mozilla) I say ok once, and if I press cancel when it comes to selecting the location, than I get the 404 Not Found if I try to download the report again.
Any ideas?
Thanks,
AdelaHey guys,
The problem was that the region from which I've took the region ID was on Never (as display).
That still doesn't explain though why the download worked if it wasn't canceled the first time.
But still it's good that I don't get the 404 Not Found page anymore.
Regards,
Adela
Edited by: adela on Jan 26, 2010 12:23 AM -
I'm trying to write PKGBUILD using mercurial and am getting a: 404: Not Found error when trying to download the repository. I must be missing something obvious here but... phhht. When I do:
hg clone http://hg.icculus.org/icculus/mojosetup
from the command line, no problems. When I put this into the PKGBUILD, and doing 'makepkg -sf', I'm getting:
==> Determining latest hg revision...
abort: HTTP Error 404: Not Found
Been a little bit but I seem to remember doing this on git pkgbuilds. Here's the PKGBUILD:
# Maintainer: Gen2ly <[email protected]>
pkgname=mojosetup-hg
_pkgname=mojosetup
pkgver=1
pkgrel=1
pkgdesc="Nextgen installer for Unix Independent Software Vendors (ISVs)"
arch=('i686' 'x86_64')
url="http://icculus.org/mojosetup/"
license=('custom')
depends=('bzip2' 'libfetch' 'lua' 'zlib')
makedepends=('mercurial')
optdepends=('')
options=()
install=""
source=('')
md5sums=()
_hgroot="http://hg.icculus.org/icculus/mojosetup"
_hgrepo="mojosetup"
build() {
msg "Connecting to Mercurial server..."
if [ -d $_hgrepo ]; then
cd $_hgrepo
hg pull -u || return 1
msg2 "The local files have been updated"
else
hg clone $_hgroot $_hgrepo || return 1
msg2 "Mercurial checkout done"
fi
# Build
mv $_pkgname $_pkgname-$pkgver
cd "$srcdir/$_pkgname-$pkgver"
mkdir cmake-build
cd cmake-build
cmake .. -DCMAKE_INSTALL_PREFIX=/usr
#-CMAKE_BUILD_TYPE=MinSizeRel
make || return 1
make DESTDIR="$pkgdir/" install
I'm guessing mercurial does versioning differently???? Any ideas?I got the build process to start reliably by changing source=('') to source=(), correcting _hgroot and adding a couple of cd ${srcdir}'s:
_hgroot="http://hg.icculus.org/icculus"
_hgrepo="mojosetup"
build() {
cd ${srcdir}
# Build
cd ${srcdir}
Unfortunately, it bombed before completing:
Scanning dependencies of target mojosetup
[ 40%] Building C object CMakeFiles/mojosetup.dir/buildver.o
[ 41%] Building C object CMakeFiles/mojosetup.dir/mojosetup.o
[ 42%] Building C object CMakeFiles/mojosetup.dir/gui.o
[ 43%] Building C object CMakeFiles/mojosetup.dir/fileio.o
[ 45%] Building C object CMakeFiles/mojosetup.dir/archive_zip.o
cc1: warnings being treated as errors
/home/david/Junk/mojosetup/src/mojosetup-733/archive_zip.c: In function 'zip_find_end_of_central_dir':
/home/david/Junk/mojosetup/src/mojosetup-733/archive_zip.c:608: error: dereferencing type-punned pointer will break strict-aliasing rules
make[2]: *** [CMakeFiles/mojosetup.dir/archive_zip.o] Error 1
make[1]: *** [CMakeFiles/mojosetup.dir/all] Error 2
make: *** [all] Error 2
==> ERROR: Build Failed.
Aborting...
Last edited by azleifel (2009-12-15 21:32:48) -
Invalid content type for SOAP: TEXT/HTML; HTTP 404 Not Found
Hi,
I have mentioned some issues that I am facing in SOAP receiver adapter:
[XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 404 Not Found;
Apart from that I am trying with unchecking 'Do Not Use SOAP envelope' and by using MessageTransformBean, for which I am getting the following error:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: invalid content type for SOAP: TEXT/HTML; HTTP 404 Not Found: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 404 Not Found
Need your help in resolving this.
Regards,
VishalI have some ideas which will help you out. Check the below option one by one:
1. Check receiver server is accessable from XI/PI system through IP address in command prompt.
2. Check whether any PORT is enabled for this server. ex: http://ipaddress:portno/XXX/XXX.asmx
3. You can download webservice tool(SOAP UI and etc..)to check your webservice(WSDL) file able to connect the server by importing webservice file in this tool.
4. Sometime customer may updated in their application(coding and etc) and not given the updated webservice file to us. so make sure you got updated one.
Regards,
Senthil -
I get Server error 404 not found when downloading OSX LIONHELP
I get Server error 404 not found when downloading OSX LION HELP!!!
See message 11600
"David R. Pina" <[email protected]> wrote:
>
Hello everyone,
I'm using weblogic 6.0 for AIX.
I'm trying to setup a new web application.
Right now, I just want to access html files, but the web server is not working
well.
I can access the file
http://myhost/myapp/index.html
but if I try to access file2.html
http://myhost/myapp/file2.html
file2.html is in the same directory, with the same permissions and I get
the 404
error message
At the beginning, I couldn't access index.html, because I created the directory
"myapp"
with user "root". Later, I changed the ownership to "wlowner" for "myapp"
directory
and for "index.html"
Then I created "file2.html" with user "wlowner", and provided the same permissions
as index.html but I can't access it.
Could someone tell what might be wrong ?
Any clues ?
Thanks,
David
Mexico City -
Hi all,
I have created a procedure to download a file.
the name of the procedure is download_my_file4
create or replace PROCEDURE download_my_file4(p_file in number) AS
v_mime VARCHAR2(48);
v_length NUMBER;
v_file_name VARCHAR2(2000);
Lob_loc BLOB;
a NUMBER;
BEGIN
select s.siteid into a from site s,lbconline_users c where
c.user_lbc_site=s.siteid and lower(c.user_login)=lower(v('APP_USER'));
for c in (select a.siteid site, b.con_id conid from kconts a, con_doc_info b where a.con_id = b.con_id )
loop
IF c.site = a THEN
SELECT MIME_TYPE, BLOB_CONTENT,NAME,DBMS_LOB.GETLENGTH(blob_content)
INTO v_mime,lob_loc,v_file_name,v_length
FROM CON_DOC_INFO
WHERE id = p_file and con_id = c.conid;
owa_util.mime_header( nvl(v_mime,'application/octet'), FALSE );
htp.p('Content-length: ' || v_length);
-- the filename will be used by the browser if the users does a save as
htp.p('Content-Disposition: attachment; filename="'||replace(replace(substr(v_file_name,instr(v_file_name,'/')+1),chr(10),null),chr(13),null)|| '"');
-- close the headers
owa_util.http_header_close;
-- download the BLOB
wpg_docload.download_file( Lob_loc );
end if;
end loop;
end download_my_file4;Permission has been granted to public
when i use this procedure in the report like
#owner#.download_my_file4?p_file=#File No.#
it is giving the error:
404 not found
The requested URL /pls/htmldb/INFOCENTRE.DOWNLOAD_MY_FILE4 was not found on this server.
Any help please?
Thanks in advance
bye
SrikaviIf you want to call packages procedures from the URL, you need to add it to a security function in the FLOWS schema:
# You need to make this procedure callable, so go to the FLOWS030100 schema
# Go to the Function WWV_FLOW_EPG_INCLUDE_MOD_LOCAL
# Add the "INFOCENTRE.DOWNLOAD_MY_FILE4" to the code like this:
if upper(procedure_name) in (
'ADD_AS_A_FRIEND', 'INFOCENTRE.DOWNLOAD_MY_FILE4') then
return TRUE;
else
return FALSE;
end if; Now you procedure is callable from the URL!
Greetings,
Rutger -
I can go to every other website except for facebook. I try every other browser in my computer but the only thing I can see is HTTP 500 error and 404 Not Found. I tried clearing cache history and cookies, enabling cookies, checking my modem, make sure my firewall permits me to access this web and even pt 's' in front of 'http' but it still dosent work. I can go to facebook with my dad's laptop and my handphone but not with this computer, why?
== URL of affected sites ==
http://www.facebook.comProblem Resolved!
I found out that I had 'http' instead of 'httpd' in the statement where I
registered my servlet, SqlServlet.
Now, I am having difficulty with hot deployment. The server is returning
error 404.
-
404 error service not found for irj/portal ??
Hello,
I am facing a problem in our productive system. It is a 2-node cluster 7.01 with hostnames v000011360 and v000012360.
We are using a web dispatcher for load balancing and redirecting.
When we try to access the portal through the web dispatcher's url, if the redirection is done to the first node (11360), portal logon screen appears and everything is ok. But if the redirection is to the 2nd Node, Service cannot be reached error occurs!
The user has to refresh the page several times, until the web dispatcher redirects to the 1st Node. A000010360 is the virtual ip of the cluster.
The complete error message is this:
Service cannot be reached
What has happened?
URL http://a000010360.central.nbg.gr/irj/portal call was terminated because the corresponding service is not available.
Note
The termination occurred in system MBP with error code 404 and for the reason Not found.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:V000012360_MBP_30-v:0-s:404-r:Notfound
HTTP 404 - Not found
Your SAP Internet Communication Framework Team
Any ideas greatly appreciated. Thank you!Hi Mark,
Yes there is a java server running in the second node!
Also, if the 2nd Node url is written directly, logon screen appears and everything works fine.
However, this should be done automatically through the web dispatcher (or the message server) load balancing.
The direct url for 1st Node is http://v000011360:53000/irj and for the 2nd Node http://v000012360:53000/irj.
Being though a cluster setup we use the virtual url http://a000010360:53000/irj, which should direct to one of the 2 nodes through the web dispatcher. If it directs to the 1st Node, everything is ok, but to the 2nd, 404 error not found occurs.
Also if server0 in 1st node fails for any reason, we cannot access the portal whatsoever! Shouldn't the dispatcher redirect to the 2nd node which is up and running? Isn't that the purpose of having a cluster system?
Thank you for your time,
GS. -
When tried to login WebConsole for the first time 404 not found error got
Hi All,
We have recently installed MI 7.0(NW2004s) and configured also as per the configuration document. But when we tried to login WebConsole we are getting the error of 404 not found. I donot know what and where I have test to login to WebConsole.
Is there any way how to test to login to WebConsole for the first time.
Appreciate your help.
Regards,
Ameer Baba.Hi Ameer,
Can you please try with the link "http://servername:portnumber/nwa", this is to open NettWeaver Mobile Administrator, as on the above reply Namitha said there is no Webconsole on MI 7.0(NW2004s) .
Regards,
Satyendra
Maybe you are looking for
-
Remote session via RDGW fine with Windows - not possible with Mac ...?
Hi, I've configured a fresh single RDS Server (all roles on one Server including Gateway) based on Windows Server 2012 R2. Everything works fine when we use Windows 7 with current RDP Client to connect via Gateway/HTTPS. When we use a Mac (OS X 10.9.
-
Blurry photos in iPhoto 11 when transferring from iPhoto 6 on different computer
I recently bought a new MacBook Pro and I'm transferring my files over from my old MacBook. When I moved my photos from the old one (running iPhoto 6) over to the new one (running iPhoto 11), the images look horrible. They're all blurry and I can't
-
I want my TOC to always highlight the topic that is currently displaying whether that topic was accessed directly from the TOC or not. I have checked the 'Always show selection ' box in Single Source Layouts/Properties/Advanced/TOC Styles but it isn'
-
Which is the suitable flash player version for galaxy tab 3
Hi , i'm using galaxy tab 3 vertion 4.1.2 and stil unable to watch any movie through putlocker site.i alredy had installed flash manually fr the device but still it says,"important codec n plug-in missing".pls help..
-
I recently installed Fedora 9 with openjdk 6. I also installed the Netbeans 6.1 mobility pack. Initially I was able to do my development without any hassles. But after a short while, I haven't been able to run the emulator. Whenever I try to run any